Upgrade phase STARTSAP_NBAS error: SYSTEM START failed

During an upgrade from BW 3.5 to BI 7.0, I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
The same thing happens when I try to log on as SAP*. I am certain that
the password I submit is correct. I have not changed this password at
any time.
I have included SAP_BASIS support package 14 into this upgrade, and
this requires kernel version 133 at least (Note 822379). This kernel
was copied into the usr\sap\put\exenew directory before the upgrade
began. However, the system still seems to run on kernel version 111.
I have tried to put the 133 kernel into
F:\usr\sap\BWS\SYS\exe\nuc\NTAMD64 so that it is copied into
F:\usr\sap\BWS\SYS\exe\run during system startup, but then all my work
processes die. The gateway also seems to be down using this kernel.
Please help!
Regards,
Thomas

Hi.
I made a stupid mistake.. the kernel I was using was unicode, but I should use a non-unicode kernel..
Regards,
Thomas

Similar Messages

  • Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

    Hi
    During an upgrade from 4.7  to ERP6  I get the following error
    message in phase STARTSAP_NBAS:
    SYSTEM START failed, code -2
    -2: the test rfc did not work.
    Try to log on to the system with user DDIC
    When I try to log on to the system as user DDIC, I get the following
    error message:
    DB-Error -0
    SAP* can log in .The password I submit is correct. I have not changed this password at
    any time.
    Any ideas are most welcome

    Hi,
    DB-Error -0 indicate problem with kernel, try to upgrade kernel.
    check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
    regards,
    kaushal

  • Upgrade Error phase STARTSAP_NBAS

    Hi all,
    I am upgrading from 47-200 to ECC6 on SQL server.
    I am using downtime minimized. I am having issue in STARTSAP_NBAS phase with error : "System start failed code 02, test RFC did not work, try to log on to system with user DDIC"
    When I am trying to logon to system with user ddic, I have a message at left bottom corner this function is not possibile.
    This is my question:
    1. Am I logging to shadow instance or the original instance?
    2. Is it possibile that DDIC user is locked?
    3. How do I solve this issue?
    I have read note 955695. It is suggesting to upgrade the kernel to minimum patch 55. I am not sure if I need to upgrade the shadow kernel or the original kernel. Also this error is not specific to this note, I am not sure if this will solve the rror.
    Can some one shed some light on this error?
    Regards,
    KG

    Vamshi,
    I unlocked the system, Tried logging in client 000 with my id as well as DDIC. message is, this function is not availiable.
    System is starting there is no problem with starting the system. On OS level, I see the WP table and everything looks good. Upgrade manager is giving me rfc error and asking me to log on with ddic. When I am logging in with DDIC, Iam getting this function not availibile error message.
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Wed Feb 27 13:52:23 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'E:\usr\sap\R3S\SYS\exe\run\dbmssslib.dll' ...
    B  Library 'E:\usr\sap\R3S\SYS\exe\run\dbmssslib.dll' loaded
    B  Version of 'E:\usr\sap\R3S\SYS\exe\run\dbmssslib.dll' is "700.08", patchlevel (0.109)
    B  New connection 0 created
    M sysno      00
    M sid        R3S
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    111
    M intno      20050900
    M make:      multithreaded, ASCII, optimized
    M pid        12688
    M
    M  kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    M  length of sys_adm_ext is 364 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 12688) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Wed Feb 27 13:52:24 2008
    M  DpShMCreate: sizeof(wp_adm)          13624     (908)
    M  DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1296)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 06DE0040, size: 4234712)
    M  DpShMCreate: allocated sys_adm at 06DE0040
    M  DpShMCreate: allocated wp_adm at 06DE1B30
    M  DpShMCreate: allocated tm_adm_list at 06DE5068
    M  DpShMCreate: allocated tm_adm at 06DE5098
    M  DpShMCreate: allocated wp_ca_adm at 07155328
    M  DpShMCreate: allocated appc_ca_adm at 07159978
    M  DpShMCreate: allocated comm_adm at 0715B0E8
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 071DBF98
    M  DpShMCreate: allocated gw_adm at 071DBFD8
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 071DC008
    M  DpShMCreate: allocated wall_adm at 071DC010
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host CAVTSBCRR907
    M 
    M Wed Feb 27 13:52:25 2008
    M  calling db_connect ...
    C  Parameter format dbs/oledb/packet_size is deprecated in release 6.20.  Please use format dbs/mss/<parameter>.  See note 28667.
    C  Parameter format dbs/oledb/pn_cache_size is deprecated in release 6.20.  Please use format dbs/mss/<parameter>.  See note 28667.
    C  Thread ID:8880
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'E:\usr\sap\R3S\SYS\exe\run\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      110
    C    patchcomment MSSQL: Connect error handling (1053754)
    C  np:(local) connection used on CAVTSBCRR907
    C  CopyLocalParameters: dbuser is 'r3s'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Wed Feb 27 13:52:26 2008
    C  Provider Release:9.00.3042.00
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Cache sizes: header 52 bytes, 20000 names (26880000 bytes), 500 dynamic statements (2728000 bytes), total 29608052 bytes
    C  Using shared procedure name cache CAVTSBCRR907_R3SR3S_R3S_MEM initialized by another process.
    C  Connected to db server : [CAVTSBCRR907] server_used : [np:(local)], dbname: R3S, dbuser: r3s
    C  pn_id:CAVTSBCRR907_R3SR3S_R3S
    C  Using MARS (on sql 9.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20080227 135225 CAVTSBCRR907   
    C  The IRow interface is supported by this OLEDB provider
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Wed Feb 27 13:52:27 2008
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0BE60040, size: 4400128)
    M  SHM_ROLL_AREA          (addr: 61AF0040, size: 268435456)
    M  SHM_PAGING_AREA          (addr: 10380040, size: 134217728)
    M  SHM_ROLL_ADM               (addr: 0C2A0040, size: 2678942)
    M  SHM_PAGING_ADM          (addr: 09160040, size: 525344)
    M  ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 0C530040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 7424 bytes (50 server) at 08DE0040
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 15, CON_ID = -1
    B  Table statistics is switched off.
    B  dbtbxbuf: Buffer TABL  (addr: 183900C8, size: 30000128, end: 1A02C4C8)
    B  dbtbxbuf: Buffer TABLP (addr: 0EF900C8, size: 10240000, end: 0F9540C8)
    B  dbexpbuf: Buffer EIBUF (addr: 0F9600D0, size: 4194304, end: 0FD600D0)
    B  dbexpbuf: Buffer ESM   (addr: 1A0300D0, size: 4194304, end: 1A4300D0)
    B  dbexpbuf: Buffer CUA   (addr: 1A4400D0, size: 3072000, end: 1A72E0D0)
    B  dbexpbuf: Buffer OTR   (addr: 1A7300D0, size: 4194304, end: 1AB300D0)
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S 
    S Wed Feb 27 13:52:28 2008
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 090AA220
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  0 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 22920098
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 22920418
    S    using messages for server info
    S  size of spec char cache entry: 165020 bytes (timeout 100 sec)
    S  size of open spool request entry: 1216 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 13040kb, dir_size: 12980kb.
    A  PXA allocated (address 87900040, size 400000K)
    A  System name
    A  MSSQL............................R3S........CAVTSBCRR907.......................................
    A  is used for RFC security.
    A  Sharedbuffer token: 5341...33 (len: 111)====== 2604347b5c103363cef73ec2...
    A  abap/pxa = shared protect gen_local
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A 
    A Wed Feb 27 13:52:29 2008
    A  ABAP ShmAdm attached (addr=B6CA1000 leng=20955136 end=B809D000)
    A  >> Shm MMADM area (addr=B70091A0 leng=134720 end=B7029FE0)
    A  >> Shm MMDAT area (addr=B702B000 leng=17244160 end=B809D000)
    A  RFC Destination> destination CAVTSBCRR907_R3S_00 host CAVTSBCRR907 system R3S systnr 0 (CAVTSBCRR907_R3S_00)
    A  RFC Options> H=CAVTSBCRR907,S=00,d=1,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 15646 bytes at 0FF60040
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is E:\usr\sap\R3S\SYS\exe\run\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
    W  === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
    W  =================================================
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume CAVTSBCRR907_R3S_00
    E 
    E Wed Feb 27 13:52:30 2008
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M  MBUF info for hooks: MS component UP
    M  ThSetEnqName: set enqname by server list
    M  ThISetEnqname: enq name = >CAVTSBCRR907_R3S_00                     <
    E 
    E  *************** EnqId_EN_ActionAtMsUpHook ***************
    E  Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
    E 
    E  *************** ObjShMem_CheckAuthoritativeEnqId ***************
    E  Checking authoritative EnqId from EnqSrv into ObjShMem
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
    E  ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
    E  EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
    E  -SHMEM--
    E  EnqId:          EnqTabCreaTime/RandomNumber    = 27.02.2008 13:52:29  1204149149 / 8220
    E  ReqOrd at Srv:  TimeInSecs/ReqNumberThisSec    = 27.02.2008 13:52:30  1204149150 / 1
    E  ReqOrd at Cli:  TimeInSecs/ReqNumberThisSec    = 27.02.2008 13:52:30  1204149150 / 1
    E  Status:         STATUS_OK
    E  -
    M  ThActivateServer: state = STARTING
    L  BtcSysStartRaise: Begin
    L  Raise event SAP_SYSTEM_START with parameter <CAVTSBCRR907_R3S_00 >
    L  BtcSysStartRaise: End
    S  server @>SSRV:CAVTSBCRR907_R3S_00@< appears or changes (state 1)
    S  server @>SSRV:CAVTSBCRR907_R3S_00@< appears or changes (state 1)
    C 
    C Wed Feb 27 13:52:55 2008
    C  The IRow interface is supported by this OLEDB provider
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
    B   max_blocking_factor =  50,  max_in_blocking_factor      = 255,
    B   min_blocking_factor =   5,  min_in_blocking_factor      =  10,
    B   prefer_union_all    =   1,  prefer_join                 =   1,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG         =   1,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x00,  character encoding          =SBCS / []:X,
    B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    B  table logging switched off for all clients
    B 
    B Wed Feb 27 13:54:15 2008
    B  dbmyclu : info : my major identification is 3757652618, minor one 0.
    B  dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
    B  dbmyclu : info : my initial uuid is DCE57E8836AF27F18941000F1F6D27B8.
    B  dbmyclu : info : current optimistic cluster level: 3
    B  dbmyclu : info : pessimistic reads set to 2.
    M 
    M Wed Feb 27 14:02:37 2008
    M  ThIUsrDel: th_rollback_usrdelentry = 1
    M 
    M Wed Feb 27 14:20:30 2008
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 055C0040
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 055C0490
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 055C04C8
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 055C04D4

  • UPGRADE/SWITCH: START OF PHASE STARTSAP_TRANS ERROR

    hi
    My upgrade is failing to start the sapsystem at the upgrade/switch phase
    SYSTEM START failed, code -2
                 -2: the test rfc did not work.
                 Try to log on to the system with user DDIC.
    i have tried to log in as ddic but its not running.am i supposed to start it manually or Sapup is supposed to do that.what could have gone wrong as the upgrade was running fine before this phase .
    Any ideas appreciated

    Hi Frank Pedro
    I am also facing the same problem. Can u specify what parameters you have changed.
    Upgrade Phase Group: Downtime phases II: Conversion, Main Import, XPRAs
    STARTSAP_NBAS
    SYSTEM START failed, code -2
    -2: the test rfc did not work.
    Try to log on to the system with user DDIC
    Thanks
    Gopal

  • Error in ecc upgrade phase

    Hi,
    while upgrading ECC 4.7 to ECC 6.0, I am not able to start shadow instance. Following error is giving .
    Aditionally I can able to open the shadow instance from GUI lavel. But unable to login through DDIC password. The ddic password has been locked. Can anyone advice me how to unlock the ddic password in the upgrade phase.
    Starting shadow system ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
          SAPup error message
    SAPup> ERROR: Starting system failed, rc=0
                  To analyse the errors during start of shadow instance,
                  view files 'STARTSFI.LOG' and 'DEVTRACE.LOG'
                  in directory '/dsttemp/put/log'
                  Repeat phase until shadow instance is started
                  and you can log on instance number '21'.
                - "continue"
                - "cancel"
    Enter one of these options [continue] :=
    ===============================================
    ===============================================
    ERROR in PHASE STARTSAP_IMP
    ================================
    =================================
    SAPup> CHECKS AFTER UPGRADE PHASE STARTSAP_IMP WERE NEGATIVE !!!
           It is recommended that you repeat phase STARTSAP_IMP
           You can exit and restart the phase after the errors
           have been corrected. Alternatively, if you know that
           the error is not of concern, you may ignore it
           and continue with phase REPACHK2
                  You are urged to repeat phase STARTSAP_IMP !
                - "repeat"
                - "init"
                - "exit"
                - "ignore"
    Enter one of these options [repeat] := init
    14:50:31  UPGRADE/EUIM: END OF PHASE   STARTSAP_IMP
    14:50:31  UPGRADE/EUIM: START OF PHASE STARTSAP_IMP
    Starting system ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
    waiting 20 seconds for system to come up ...
    testing if system is available ...
          SAPup error message
    SAPup> SYSTEM START failed, code -2
                        -2: the test rfc did not work.
                        Try to log on to the system with user DDIC.
                - "continue"
                - "cancel"
    Enter one of these options or "help" [continue] :=
    Enter one of these options or "help" [continue] :=
          SAPup message
    SAPup> CHECKS AFTER UPGRADE PHASE STARTSAP_IMP WERE NEGATIVE !!!
           It is recommended that you repeat phase STARTSAP_IMP
           You can exit and restart the phase after the errors
           have been corrected. Alternatively, if you know that
           the error is not of concern, you may ignore it
           and continue with phase REPACHK2
                  You are urged to repeat phase STARTSAP_IMP !
                - "repeat"
                - "init"
                - "exit"
                - "ignore"
    Enter one of these options [repeat] :=
    Appreciate for an immediate response ...
    Thanks in advance

    while upgrading ECC 4.7 to ECC 6.0, I am not able to start shadow instance. Following error is giving .
    Aditionally I can able to open the shadow instance from GUI lavel. But unable to login through DDIC password. The ddic password has been locked. Can anyone advice me how to unlock the ddic password in the upgrade phase.
    This doesn´t make sense. If you can´t start the shadow instance then you can´t logon to the system
    Try the following:
    cd <put-directory>/bin
    ./SAPup stopshd
    set the parameter
    login/no_automatic_user_sapstar = 0
    in the instance profile of the shadown instance
    then start the shadow instance
    cd <put-directory>/bin
    ./SAPup startshd
    Unlock the shadow instance using
    ./SAPup unlockshd
    Try to logon with user SAP* and unlock DDIC.
    Markus

  • Export for system copy fails - Error 9 (Bad file number)

    Hello all,
    I am attempting to perform the export phase for a hetergenous system copy on our BI system (BI 7.0 - NW2004s).  This system runs on HP-UX 11.11 using Oracle  10.2.0.2 and will be migrated to Windows Server 2003 and MS SQL Server 2005, once the export is complete.
    While running sapinst to export the data from the source system, there are several input dialog screens that are skipped, which means I am not able to enter all the paramters used for the export.  After seeing this behavior from sapinst, I reviewed the sapinst.log and sapinst_dev.log files and find the warning/error "System call failed. Error 9 (Bad file number)".  I have included a portion of these files below.
    I have reviewed notes 546006 and 583861, but these seem to refer to an Oracle error ORA-27121, but I am not receiving any Oracle errors in sapinst.log or the Oracle alert log.  I have looked for possible permission or ownership problems with any of the SAP or Oracle files, but have not found any that were incorrect.  Also, these errors do not specify which file sapinst is having problems with, so I do not have  a specific file or area to check.
    If anyone has seen something similar to this and has any suggestions, I would greatly appreciate any help.
    sapinst.log details:
    INFO 2009-02-14 15:15:51.67
    Execute step collect of component |NW_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind
    |ind|ind|0|0
    INFO 2009-02-14 15:15:52.737
    Account bwpadm already exists.
    WARNING 2009-02-14 15:15:52.747
    System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
    r.cpp).
    INFO 2009-02-14 15:15:52.757
    Account 0 already exists.
    WARNING 2009-02-14 15:15:52.777
    System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
    r.cpp).
    INFO 2009-02-14 15:15:52.777
    Account 200 already exists.
    WARNING 2009-02-14 15:15:52.827
    System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
    r.cpp).
    INFO 2009-02-14 15:16:04.937
    Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/ypcat.log.
    INFO 2009-02-14 15:16:05.007
    Output of ypcat passwd.byname is written to the logfile ypcat.log.
    sapinst_dev.log details:
    TRACE      2009-02-14 15:15:52.737
    2009-02-14 15:15:52.743 NW._getSAPMount() done: /sapmnt
    INFO       2009-02-14 15:15:52.737 [syuxcaccmg.cpp:227]
               bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
    Account bwpadm already exists.
    TRACE      2009-02-14 15:15:52.747 [syuxcuser.cpp:1943]
               CSyUserImpl_getOsInfos(ILogBook *m_logBook, iastring sName, iastring sID, tSyUserInfo& msUserinfo)
    getspnam(bwpadm) returned NULL.
    WARNING    2009-02-14 15:15:52.747 [syxxsyshlp.cpp:78]
               syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
    System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
    r.cpp).
    Regards,
    Rusty Robbins

    Hello Peter,
    Thanks for the reply. I did confirm the points you made, and have the details below.
    1. check filesystem, if you have enough space, especially /tmp
    All filesystems have available space, and /tmp has 310 MB available, before the start of sapinst.
    2. check again alert log, trace log for Oracle,
    I could not find any errors in the alert_SID.log or any unusual trace files.
    3. How did you run sapinst? Are you using "root" account.
    I am running sapinst as user root and I am following all the recomendations in the system copy guide (at least as far as I can tell.  ;p )
    We have four BI systems in this landscape, and the other three have migrated successfully.  The procedure I am using, is the same as for the other 3 systems and uses the same SAP media directory that was used on the other systems.
    One other item that may be part of my problem here, is that this system is the production system, and was originally installed as a high-availability system, using HP-UX Service Guard for clustering.  Currently, this system does not have fail-over enabled, but of course the cluster is still intact.  One required piece of the Service Guard enviornment is the use of a virtual hostname.  This seems to resolve successfully by sapinst, as I see the correct (virtual) hostname referenced several times.  While this is a clustered system (for fail-over purposes), the CI and DB are installed on the same host.  So it is not a distributed system, and if failover had been initiated, it would fail both the CI and DB instance, which is the same and only SAP instance.
    This did raise one question in my mind, however.  I am attempting to extract this using the following menu path within sapinst.
    SAP NetWeaver 7.0 Support Release 3  --> Software Life-Cycle Options --> System Copy --> Oracle --> Source System Export --> Central System --> Based on AS ABAP and AS Java
    Since this does use Service Guard, but is not a distributed system, should I be using a different path in the sapinst tree, for the export?  I have only performed a migration using the above path, so I am not familar with the detailf of the other types, such as High-Availabitly or Distributed-System.
    Regards,
    Rusty

  • Error in starting SAP Systems at  SAP Management Console

    Hi,
    I have received the following error messages , after installed the "SAP NetWeaver Composition Environment 7.1 sp1"  run SAP management Console->SAP Systems-> start .
    after that ,the system ask me to logon on for webservice authentication,then i write my os user and password,but the system deny me,and the error  follow as:
    error messages:
    Start failed:2
    Permission denied
    I need help,
    best regards

    Hi
    You need to logon as <sid>adm and provide the password... if you try to start the service with a user without auth you'll get permission denied.
    User must be <sid>adm or a member of the Local or Domain Administrators
    Regards
    Juan

  • Upgrade-phase "CONFLICT_CHECK" fails with error

    Please help, I am trying to run the prepare for our BW 3.5 to BI 7.0 (SR2) upgrade and am running into an error in the CONFLICT_CHECK phase:
    Conflict check failed, rc = "-2", reason = "Internal error: OCS_COLLECT_ADDON_TASKS: MISSING_CMD_IMPORT SAPK
    INBC9D"
    When i ran this in our beta and dev environment I wasn't updating as many support packs and plug in's; and I did not run into this error.  Here are the addon's I am updating
    Addon       current version           upgraded version       how I am updating
    PI_BASIS     2005_1_640     2006_1_700     UPG With ADDON CD
    BI_CONT     353                     703                     UPG WITH SAINT PACK
    ST-A/PI     01F_BCO640     -                     DELETE
    ST-PI     2005_1_640     2005_1_700     UPG WITH SAINT PACK
    Here is the output file:
    more CONFLCHK.LOG
    1 ETQ201XEntering upgrade-phase "CONFLICT_CHECK" ("20071011155952")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '30', GwService = 'sapgw30'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPBWS
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
    4 ETQ399 (trc) R3upExtendedInclusion: TRUE (default)
    2 ETQ160 Starting conflict check
    4 ETQ010 Date & Time: 20071011155952 
    4 ETQ230 Starting RFC Login to: System = "BWS", GwHost = "sapbws", GwService = "sapgw30"
    4 ETQ233 Calling function module "SPDA_CONFLICT_CHECK" by RFC
    2 ETQ161 Conflict check failed, rc = "-2", reason = "Internal error: OCS_COLLECT_ADDON_TASKS: MISSING_CMD_IMPORT SAPK
    INBC9D"
    4 ETQ010 Date & Time: 20071011155952 
    As you can see it is looking for SAPKINBC9D.  This is not an addon package I selected.  The PI_BASIS uses SAPKINBC9A.  I checked SEPS (EPS admin) and do not see this.  I also tried to search for this file on service.sap.com and do not see it.  I have no idea what could be causing this.  Please help!
    Erika

    Hello,
    If I remember correctly it was the version of PI_BASIS.  I ended up upgrading the following addon's during the upgrade follows:
    PI_BASIS     2005_1_640     2005_1_700     Inst/UPG with STD CD
    BI_CONT     353     703     UPG WITH SAINT PACK
    ST-A/PI     01F_BCO640     -     DELETE
    ST-PI     2005_1_640     2005_1_700     UPG WITH SAINT PACK
    After the upgrade, I applied the PI_BASIS upgrade and support packs.

  • On starting Essbase, system throws error "CSS Initialization Fails"

    Hi
    I have been using the hyperion essbase in the past.
    Today the someone removed the network cable connecting to the servers. I put them back but since then i am facing issue where i cannot connect to Essbase server.
    I tried restarting the essbase server. On starting the server it first gives the warning:
    log4j:WARN No appenders could be found for logger (com.hyperion.css.common.CSSLo
    gger).
    log4j:WARN Please initialize the log4j system properly.
    But it continues and then prompts error
    [Fri Mar 18 17:06:02 2011]Local/ESSBASE0///Error(1051429)
    Essbase Product Existence Check Fails against the Shared Services Server with Er
    ror [Unable to connect to Shared Services, make sure the Shared Services server
    is running and try again.]
    Fatal Error: CSS Initialization Fails
    I checked the Shared Services service, and it is running fine. My environment is a distributed environment where shared services(foundation) are installed on different machine than Essbase server
    Did anyone also face the problem... please help

    Hi John
    Thanks for the reply. I am able to login and navigate through HSS using the following URL: http://punitp165594d:28080/interop/
    Following are the log entries in SharedServices_Security_Client.log when i tried to start the Essbase server:
    *2011-03-21 13:20:48,803 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)*
    *2011-03-21 13:20:48,819 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)*
    *2011-03-21 13:20:48,819 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)*
    *2011-03-21 13:20:48,819 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)*
    *2011-03-21 13:20:48,865 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
    *2011-03-21 13:20:52,176 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
    *2011-03-21 13:20:53,535 INFO [main] Got hub location from Registry:http://<servername>:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)*
    *2011-03-21 13:20:54,238 INFO [main] Got native directory location from Registry:<servername>:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)*
    *2011-03-21 13:20:54,253 INFO [main] URL constructed out of values in Registry database:ldap://<servername>:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)*

  • STARTSAP_NBAS - status NO SYSTEM START

    Hi all,
    I'm upgrading R/3 4.7 to ERP 6.0 SR3 NUC; Windows 2008 + SQL Server 2008. I'm in weekend downtime. In phase status STARTSAP_NBAS I have the error:
    UPGRADEPHASE STARTSAP_NBAS
    ...started at 20140222060031
    # Reading Parameter File "D:\usr\sap\put\bin\ALPALL.LST" at 20140222060031
    ..finished at 20140222060636 with status NO SYSTEM START.
    ...begin dialogue at 20140222060636
    tp.ECO log:
    SAPup>  Starting subprocess tp.exe with id 5024 at 20140222061006
    EXECUTING D:\usr\sap\<SID>\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\SHADOW.TPP unlocksys <SID>
    Environment: dbms_type=mss
    Environment: dbs_mss_schema=<sid>
    initial value of NLS_LANG: '<NULL>'
    This is D:\usr\sap\<SID>\SYS\exe\run\tp.exe version 372.05.88 (release 700)
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    TRACE-INFO: 1:  [     dev trc,00000]  Sat Feb 22 06:10:08 2014                                                         2182  0.002182
    TRACE-INFO: 2:  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 0000000187740000
    TRACE-INFO: 3:                                                                                                           10  0.002192
    TRACE-INFO: 4:  [     dev trc,00000]      using "D:\usr\sap\<SID>\SYS\exe\run\dbmssslib.dll"                                9  0.002201
    TRACE-INFO: 5:  [     dev trc,00000]  Thread ID:5516                                                                   1590  0.003791
    TRACE-INFO: 6:  [     dev trc,00000]  Thank You for using the SLODBC-interface                                           11  0.003802
    TRACE-INFO: 7:  [     dev trc,00000]  Using dynamic link library 'D:\usr\sap\<SID>\SYS\exe\run\dbmssslib.dll'              19  0.003821
    TRACE-INFO: 8:  [     dev trc,00000]  dbmssslib.dll patch info                                                           40  0.003861
    TRACE-INFO: 9:  [     dev trc,00000]    SAP patchlevel  0                                                                 9  0.003870
    TRACE-INFO: 10:  [     dev trc,00000]    SAP patchno  353                                                                  8  0.003878
    TRACE-INFO: 11:  [     dev trc,00000]    Last MSSQL DBSL patchlevel 0                                                     11  0.003889
    TRACE-INFO: 12:  [     dev trc,00000]    Last MSSQL DBSL patchno         350                                               9  0.003898
    TRACE-INFO: 13:  [     dev trc,00000]    Last MSSQL DBSL patchcomment Work process can not be cancelled (1740162)         12  0.003910
    TRACE-INFO: 14:  [     dev trc,00000]  lpc:(local) connection used on SAP<SID>                                             534  0.004444
    TRACE-INFO: 15:  [     dev trc,00000]  ERROR: -1 in function ExecuteAndFlush (SQLExecDirect) [line 5520]               78212  0.082656
    TRACE-INFO: 16:  [     dev trc,00000]  (15157) [42000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Setuser failed because of one of the following reasons: the database principal '<sid>_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    TRACE-INFO: 17:                                                                                                           29  0.082685
    TRACE-INFO: 18:  [     dev trc,00000]  <if user_name() != '<sid>_shd' setuser '<sid>_shd'> failed -- connect terminated       32  0.082717
    TRACE-INFO: 19:  [    dblink  ,00433]  ***LOG BY2=>sql error 15157  performing CON [dblink#8 @ 433]                       57  0.082774
    TRACE-INFO: 20:  [    dblink  ,00433]  ***LOG BY0=>Setuser failed because of one of the following reasons: the database principal '<sid>_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission. [dblink#8 @ 433]
    TRACE-INFO: 21:                                                                                                           23  0.082797
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0232
    tp finished with return code: 232
    meaning:
      connect failed
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: Connect to <SID> failed (20140222061008, probably wrong environment).
    Process with ID 1756 terminated with status 232
    <SID>Adm User has this environment variables:
    dbms/type = mss
    dbs/mss/server = <HOST>
    dbs/mss/dbname = <SID>
    dbs/mss/schema = <sid>
    I check the following SAP Notes:
    - 128126 - Database connect for external tools
    - 525677 - Problems when starting shadow instance
    - 592514 - MSSQL: internal database users, permissions and security
    - 1294762 - SCHEMA4SAP.VBS
    - 1727986 - Upgrade Phase MAIN_NEWBAS/STARTSAP_NBAS: Error Starting SAP
    - 1910759 - Start of Shadow Instance Failed during upgrade
    but any of them, help me to fix the stopper.
    Can anybody give me any idea, please?

    Hi Javier,
    Have you tried by executing script mssupgsps.sql ,which you can find under D:\usr\sap\put\bin.This script will create stored procedure sap_upg_getrelease.
    After execution provide grant with following
    add setuser '<sid>'
    grant all on sap_upg_getrelease to <sid>_shd
    Hope this will help you.
    Regards,
    Gaurav

  • Upgrade-phase "SYIDUP_EXTRACT/PROFREAD" error

    We are upgrading SCC system.
    While generating stack.xml file from solman 7.1 sp 10, we got error in the verification execution as Cannot recognize installed product instance in lmdb.
    We referred the note - 1816146 - Correction of installed software information (CISI.
    1. We run the report RLMDB_DOWNLOAD_INST_SOFT_INFO and created .xml file.
    2. downloaded SUM sp10
    While running SUM tools we got the error the phase "SYIDUP_EXTRACT/PROFREAD" as below.
    Attaching files as -
    1. All log file from directory 'S:\usr\sap\SCC\SUM\abap\log'
    2. All profiles
    We analyzed the issue. Error is coming the file PROFREAD.LOG as
    1 ETQ201 Entering upgrade-phase "SYIDUP_EXTRACT/PROFREAD" ("20140409192228")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '', GwService = 'sapgw' Client = '000'
    4 ETQ399 Environment variables:
    4 ETQ399  auth_shadow_upgrade=<null>
    1 ETQ200 Executing actual phase 'SYIDUP_EXTRACT/PROFREAD'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'DDICPWD_ONLY'
    4 ETQ399 Starting dialog 'Passwords' at 20140409192229.
    1 ETQ359 RFC Login to: System="SCC", AsHost="dl5802" Nr="", GwHost="dl5802", GwService="sapgw"
    2EETQ231 RFC Login failed
    4EETQ399 Dialogue validator 'DDICValidator' failed with 'DDIC password does not work:
    RFC login to system SCC ashost dl5802 nr  gwhost dl5802 gwservice sapgw failed with code 1 key RFC_COMMUNICATION_FAILURE:
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR      partner 'dl5802:3300' not reached
    TIME        Wed Apr 09 19:22:37 2014
    RELEASE    721
    COMPONENT  NI (network interface)
    VERSION    40
    RC          -10
    MODULE      nixxi.cpp
    LINE        3285
    DETAIL      NiPConnect2: 172.17.206.26:3300
    SYSTEM CALL connect
    ERRNO      10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER    1
    4 ETQ399 Repeat dialog since input validation failed.
    Please check the same and revert backup.
    Thanks,
    Kundan Gandhi
    9930446697

    Hi all,
    Please check 4 ETQ399 System-nr = '', GwService = 'sapgw' Client = '000' in the log mentioned.
    Why it is not picking up any value for  System-nr = (It should get system no. 40 - as my system no is 40)
    Please revert, if any body faced this type of issue.
    Thanks,
    Kundan Gandhi

  • Error during the upgrade phase "start_shdi_first"

    Hello,
    We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
    Here the error message goes....
    starting system failed rc=0
    to analyse the error during start of shadow instance
    view files 'Startsfi.log' and 'devtrace.log'
    in directory usr\..put
    repeat phase until shadow instance is started
    and u can logon instance no '01'"
    We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
    I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
    Appreciate your response
    Startsfi.log
    1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
    2 ETQ366 Connect variables are set for shadow instance access
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=de4
    4 ETQ399   auth_shadow_upgrade=1
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 ENV: dbs_mss_schema=de4
    4 ETQ399 ENV: auth_shadow_upgrade=1
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2 ETQ353 Starting system
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
    2EETQ399 Dialogue: ERROR
    2EETQ399 Starting system failed, rc=0
    DEVTRACE:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        DE4
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    111
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2272
    Mon Feb 18 16:08:40 2008
    kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 111 successfully loaded
         shared lib "dw_xtc.dll" version 111 successfully loaded
         shared lib "dw_stl.dll" version 111 successfully loaded
         shared lib "dw_gui.dll" version 111 successfully loaded
         shared lib "dw_mdm.dll" version 111 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Mon Feb 18 16:08:52 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
    Mon Feb 18 16:09:10 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MTW02SDEC01_DE4_01                      <
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 065C0040, size: 4241064)
    DpShMCreate: allocated sys_adm at 065C0040
    DpShMCreate: allocated wp_adm at 065C1B30
    DpShMCreate: allocated tm_adm_list at 065C6938
    DpShMCreate: allocated tm_adm at 065C6968
    DpShMCreate: allocated wp_ca_adm at 06936BF8
    DpShMCreate: allocated appc_ca_adm at 0693B248
    DpShMCreate: allocated comm_adm at 0693C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 069BD868
    DpShMCreate: allocated gw_adm at 069BD8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 069BD8D8
    DpShMCreate: allocated wall_adm at 069BD8E0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2046 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12437]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 111
    Release check o.K.
    Mon Feb 18 16:09:13 2008
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4724] Mon Feb 18 16:08:40 2008
    [Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5420
    [Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c   1824]
    [Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
    [Thr 4724] MsGetOwnIpAddr: my host addresses are :
    [Thr 4724]   1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
    [Thr 4724]   2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    [Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
    [Thr 4724] HTTP logging is switch off
    [Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
    [Thr 4724] ms/icf_info_server : deleted
    [Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
    [Thr 4724] CUSTOMER KEY: >J1537289841<
    trc file: "dev_rd", trc level: 1, release: "700"
    Mon Feb 18 16:09:10 2008
    ***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c     1694]
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2344
    gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    Bind service sapgw01 (socket) to port 3301
    GwPrintMyHostAddr: my host addresses are :
      1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
      2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06110040, size: 4241064)
    DpShMCreate: allocated sys_adm at 06110040
    DpShMCreate: allocated wp_adm at 06111B30
    DpShMCreate: allocated tm_adm_list at 06116938
    DpShMCreate: allocated tm_adm at 06116968
    DpShMCreate: allocated appc_ca_adm at 0648B248
    DpShMCreate: allocated comm_adm at 0648C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0650D868
    DpShMCreate: allocated gw_adm at 0650D8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0650D8D8
    MtxInit: -2 0 0
    Mon Feb 18 16:09:14 2008
    GwDpInit: attached to gw_adm at 0650D8A8
    Thanks,
    Vadi

    Dear All,
    The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
    "basis05" during upgrade.we changed it back to welcome and it started working fine.
    Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
    Thanks for all your replies.

  • Error during upgrade phase JOB_RSUPGCUA_SHD

    Hi Everyone,
    We are in the process of completing a combined ERP 6.0 Upgrade / Unicode Conversion.  Our starting release is ECC 5.0 (ABAP only) and we are running Oracle 10.2.0.2 on AIX 5.3. 
    We are receiving the following error in phase JOB_RSUPGCUA_SHD:
    1 ETQ201XEntering upgrade-phase "JOB_RSUPGCUA_SHD" ("20080812163717")
    2 ETQ366 Connect variables are set for shadow instance access
    4 ETQ399 System-nr = '56', GwService = 'sapgw56'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=1
    4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
    4 ETQ010 Date & Time: 20080812163717
    4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
    4 ETQ230 Starting RFC Login to: System = "ENP", GwHost = "aix12j1", GwService = "sapgw56"
    4 ETQ359 RFC Login to: System="ENP", Nr="56", GwHost="aix12j1", GwService="sapgw56"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
    2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "10")
    2EETQ261 Start of batchjob "RSUPGCUAGEN111" failed
    1EETQ203 Upgrade phase "JOB_RSUPGCUA_SHD" aborted with errors ("20080812163717")
    We originally had some issues with the shadow system not starting in phase START_SHDI_FIRST.  The source of the problem was the value of paramter ipc/shm_psize_40 in the instance profile of the shadow system.  When we ran "sappfpar check" on the profile, the output indicated that the paramter was too small.  We backed up the profile, increased the parameter to the value "sappfpar check" recommended and then stopped the shadow system via "SAPup stopshd."  We then repeated the phase.  The shadow instance was started successfully and the upgrade proceeded with subsequent phases.
    We encountered the error above several phases later.  The shadow instance is started and I am able to login with user DDIC.  As detailed in the error message above, function module SUBST_START_BATCHJOB is aborting with error code 10.  Based on what I can interpret from source code of the function module, this seems to indicate that there is a problem with the program values.  The SM21 log indicates that "Program name RSUPGCUAGEN111 is invalid." 
    What do we need to do to get past this error?
    Thanks in advance for any assistance,
    Tommye

    for our case it was that the shadow instance was not completely stsarted, some processes were down, cause the ipc pool 40 was too small, i found the error in the killed work processes.
    Probleme resolved as susch. i hope it will help someone.
    Regards

  • Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA

    Hi
    I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
    Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
    After, during the import in the target system I get the following error message:
    vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
    INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
    Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66  finish processing of package SAP0000
    You can see below the detail of the 5 packages in error:
    SAPAPPL0_1_5
    DbSlExecute: rc = 99
      (SQL error 2216)
      error message returned by DbSl:
    ORA-02216: tablespace name expected
    (DB) INFO: disconnected from DB
    /usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
    /usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
    SAPZPSA
    DbSlExecute: rc = 99
      (SQL error 2216)
      error message returned by DbSl:
    ORA-02216: tablespace name expected
    (DB) INFO: disconnected from DB
    SAPDODS
    DbSlExecute: rc = 99
      (SQL error 922)
      error message returned by DbSl:
    ORA-00922: missing or invalid option
    (DB) INFO: disconnected from DB
    SAPDFACT
    DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
    DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
    (DB) ERROR: DDL statement failed
    (  ALTER TABLE "/BI0/F0TCT_C01"    ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131  )    TABLESPACE "" )
    DbSlExecute: rc = 99
      (SQL error 1741)
      error message returned by DbSl:
    ORA-01741: illegal zero-length identifier
    (DB) INFO: disconnected from DB
    SAPZOSO
    DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
    DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
    (DB) ERROR: DDL statement failed
    (CREATE TABLE "/BIC/B0000989000"    ("REQUEST" VARCHAR2 (000090)      DEFAULT ' ' NOT NULL,    "DATAPAKID" VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "PART
    NO" NUMBER (000010)      DEFAULT 0 NOT NULL,    "RECORD" NUMBER (000010)      DEFAULT 0 NOT NULL,    "PLANT" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "MATERIA
    L" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "RPA_CURUOM" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RPA_MVF" NUMBER (000017, 000002)      DEFAULT 0 NOT N
    ULL,    "PRICE_UNIT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RPA_QTYUOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_SSMFGR" VARCHAR2 (000024)
        DEFAULT '00000000' NOT NULL,    "BASE_UOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "FRE_PLNPUR" VARCHAR2 (000036)      DEFAULT ' ' NOT NULL,    "FRE_MINS
    TK" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SERLEV" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SELCLS" VARCHAR2 (000003)      DEFAULT '
    0' NOT NULL,    "FRE_REPLST" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "ABCKEY" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RECORDMODE" VARCHAR2 (000003)
        DEFAULT ' ' NOT NULL,    "RT_SERVLEV" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RT_SUPS" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "VAL_TYPE" VARCH
    AR2 (000030)      DEFAULT ' ' NOT NULL,    "PUR_GROUP" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VPNEU" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,
    "CURRENCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VRKPE" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "DISMM" VARCHAR2 (000006)      DEFAULT ' '
    NOT NULL,    "SALES_UNIT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VP_BT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_BT" NUMBER (000017,
    000003)      DEFAULT 0 NOT NULL,    "RT_VP_NT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_NT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "R
    T_VWAERBT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VWAERNT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VPMEIBT" VARCHAR2 (000009)      DEFAULT '
    ' NOT NULL,    "RT_VPMEINT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "LOC_CURRCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "UNIT" VARCHAR2 (000009)
      DEFAULT ' ' NOT NULL,    "CM_MCATDIV" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT1" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT2" VARCHAR2
    (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT3" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT4" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_HIEID"
    VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "CPSTLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "CPSVLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL
    ,    "STOCK_VAL" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "STOCK_QTY" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RT_SEASON" VARCHAR2 (000012)
      DEFAULT ' ' NOT NULL,    "RT_SEASYR" VARCHAR2 (000012)      DEFAULT '0000' NOT NULL,    "CALDAY" VARCHAR2 (000024)      DEFAULT '00000000' NOT NULL,    "CALWEEK"
    VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "RF_BNDID" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "/BIC/ZCATTR3" VARCHAR2 (000006)      DEFAULT ' ' NOT
    NULL,    "/BIC/ZCSTYLE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCIMAGE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCBRNDTYP" VARCHAR2 (000
    003)      DEFAULT ' ' NOT NULL,    "/BIC/ZCGROUPE" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL)    PCTFREE 10    PCTUSED 00    INITRANS 001    TABLESPACE    STORAGE (
    INITIAL    0000000016 K            NEXT        0000001024 K            MINEXTENTS  0000000001            MAXEXTENTS  2147483645            PCTINCREASE 0000
        FREELISTS  001            FREELIST GROUPS 01)      PARTITION BY RANGE ("PARTNO")      (      PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN      (00000
    00002)      NOCOMPRESS      ) )
    DbSlExecute: rc = 99
      (SQL error 922)
      error message returned by DbSl:
    ORA-00922: missing or invalid option
    (DB) INFO: disconnected from DB

    hello,
    Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
    let me know how it goes.
    Regards,
    Michael

  • Error phase Install Common system files SAP NW 7.1

    Hello  
    I have a problem  in my  installation of SAP NW 7.1 for PI
    I was installating the  SAP NW but I stopped it  and  deleled this system (SID=TPI), then  I  started again  the installation (SID=PI1) but in the phase Install Common System Files i got this message:
    sapint_dev.log
               CJSlibModule::writeInfo_impl()
    File system node C:/WINDOWS/TEMP exists already. Nothing to do.
    INFO       2010-07-09 17:30:13.765
               CJSlibModule::writeInfo_impl()
    File system node D:/usr/sap exists already. Nothing to do.
    INFO       2010-07-09 17:30:13.765
               CJSlibModule::writeInfo_impl()
    Creating SAP system shares for PI1...
    WARNING[E] 2010-07-09 17:30:13.921 [ianxbservi.hpp:244]
               CServiceHandle::Open(ClusSvc)
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
    WARNING[E] 2010-07-09 17:30:14.109
               CJSlibModule::writeError_impl()
    CJS-30129  Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
    Unable to create node
    pgspi\saploc\ with type DIRECTORY: can't create parent node...
    WARNING[E] 2010-07-09 17:30:14.171
               CJSlibModule::writeError_impl()
    CJS-30129  Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
    Unable to create node
    pgspi\saploc\ with type DIRECTORY: can't create parent node...
    ERROR      2010-07-09 17:30:14.234 [sixxcstepexecute.cpp:984]
    FCO-00011  The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
    WARNING    2010-07-09 17:30:14.437 [iaxxejshlp.cpp:150]
    Could not get property IDs of the JavaScript object.
    ERROR      2010-07-09 17:30:14.437 [iaxxejsctl.cpp:492]
    FJS-00010  Could not get value for property .
    INFO       2010-07-09 17:30:45.921 [sixxcstepexecute.cpp:1072]
    An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories".
    INFO       2010-07-09 17:30:48.640 [synxccuren.cpp:1016]
               CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS)
               lib=syslib module=syslib
    Working directory changed to C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS.
       LOG sapint.log
    INFO 2010-07-09 17:30:13.296
    Execute step createFirstSystemDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0
    INFO 2010-07-09 17:30:13.750
    File system node C:/WINDOWS/TEMP exists already. Nothing to do.
    INFO 2010-07-09 17:30:13.765
    File system node D:/usr/sap exists already. Nothing to do.
    INFO 2010-07-09 17:30:13.765
    Creating SAP system shares for PI1...
    WARNING[E] 2010-07-09 17:30:13.921
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
    WARNING[E] 2010-07-09 17:30:14.109
    CJS-30129  Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
    Unable to create node
    pgspi\saploc\ with type DIRECTORY: can't create parent node...
    WARNING[E] 2010-07-09 17:30:14.171
    CJS-30129  Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
    Unable to create node
    pgspi\saploc\ with type DIRECTORY: can't create parent node...
    ERROR 2010-07-09 17:30:14.234
    FCO-00011  The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
    WARNING 2010-07-09 17:30:14.437
    Could not get property IDs of the JavaScript object.
    ERROR 2010-07-09 17:30:14.437
    FJS-00010  Could not get value for property
    I had found information about saploc  however  still I got the same 
    The installation is on Windows 2003 + Sql 2005
    Any suggestion    for this problem
    Thanks
    Danny

    Hello
    I deleted the system  with the wizard on sapinst
    NetWeaver Process Integration 7.1 Software Life-Cycle Options Uninstall Uninstall ‒ SAP systems or
    single instances .
    Danny
    Edited by: Danny Sanchez on Jul 12, 2010 4:17 PM

Maybe you are looking for