Upgrade wisms using WCS

We have three wisms and I used to upgrade from each wism CLI one by one. This time I want to try to use WCS to upgrade all of them at once. Are there anything to consider when using WCS to upgrade a bunch of wisms? Is it going very well?
Thank you!

No problems encountered so far.
We did use the cascade function for reboot.

Similar Messages

Adding a secure WLAN - WISM and WCS

I have a setup including a WISM and WCS which currently only runs a guest service using webauth to get online. The service (by request) is not secured over the air. I would like to implement a second SSID with security but before going the whole way with 802.1x I wanted to implement a half way house. Service will still only be a guest service but I want the air traffic secured.
So I guess my options are WEP (forget it) or WPA/WPA2.
My question is do I have to run this service with a shared secret that I then need to inform all users of in order for them to be able to connect to the service or is there a way to implement a WPA service that uses some kind of credential check against the already configured RADIUS (ACS) servers?
And if this is possible I assume there is no longer need for a webauth as this just seems to duplicate the login process.
Thanks for any pointers in advance
Paul

The best thing you can do is start with the Configuration Guides. If you don't have a test environment and have SMARTNET on the WiSMs/ WCS, utilize TAC to help you get up and going. I would also suggest utilizing a Cisco Partner to help with the initial implementation as well.
I would recommend upgrading your WiSMs and WCS to the latest versions and making sure configurations are the same across modules. I upgraded our WiSMs from 4.x to 7.0.98.0 and WCS to 7.x. Ran into a bug here and there but that is expected. Just make sure the wireless devices support those versions. If you are unsure, you can always work towards the AssureWave tested code. WCS 7.x should be backwards compatible (check the release notes just to verify). The Design Zone and Release Notes are your friend too.
-Rick

I need Upgrade WiSM to 7.0.235.3

I have a 6509-E with Sup WS-SUP720-3B IOS (s72033-ipservicesk9_wan-mz.122-18.SXF7)
And i need upgrade my Wism to software version 7.0.235.3, and i have a question:
I have to update the ios Supervisor? or can i upgrade to 7.0.235.3 with Supervisor IOS version 12.2(18).SXF7?
Thanks

Hi Juan,
No I did not find any specific documents about there compatibility.
The firmware of the IOS does not decide your 6500 Supervisor. If you want to use WiSM-1, regardless of the firmware you have inside, then your supervisor card should be a Sup720 running IOS version SXF2.
So dont worry about this and go ahead with wism software upgrade.
wism last support is 7.0.x .
Regards
Dont forget to rate helpful posts

Using WCS without AP

I did some searching but couldnt find what i was looking for so figured i would ask for help.
We use our WCS to deploy software and config on our WLC's (approx 100)
We don't need to manage/monitor the Access Points on our WCS only the WLC are needed.
Is there a way to not have the AP add on a WCS when you add a WLC ?
If not is there another Cisco tools wich can do the job ? Manage centraly only WLC (without the AP) ?
Thanks in advance for your help.

Hmmm... Its like this.. The time we add the WLC to the WCS , all the AP will get added.. on top of that.. when we upgrade the WLC code, the AP registered to the WLC wil also reload the gets the latest software version as well..
Wat i meant was.. instead of monitoring the WLC from the WCS u can use SNMP and SNMP WALK..
In case if you want to upgrade the WLC using WCS then we need the WCS but we cannot opt out APs though..
Regards
Surendra

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

You need a newer 2011 or later iMac to use Airplay.
Sorry.
For older Mac, look at an app called AirParrot
http://www.airsquirrels.com/airparrot/

Where can I upgrade to use DV capture?

Where can I upgrade to use DV capture?

invernessms
If your program is Premiere Elements 13 which no longer has the DV HDV Capture firewire, you can get a suggested Adobe workaround for the 13 situation.
Please refer to the following Adobe document.
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
ATR

CC&B 2.1.0 upgrade of use of Microfucos visual cobol from net express

Would there be any issue of upgrading the use of Microfocus Visual Cobol from Net Express?

starfry wrote:I don't know if it's related to your problem but GPG2.1 doesn't allow pass phrases to be specified in a file or on the command-line. See the page on unattended operation, look at "%ask-passphrase" and "%no-protection" https://www.gnupg.org/documentation/man … ation.html
Thanks for the link - that's only for gen-key, however. But I do confirm the "--passphrase-fd 0" is supposed to still be working as described in the current docs:
https://www.gnupg.org/documentation/man … ic-Options
--passphrase-fd n
Read the passphrase from file descriptor n. Only the first line will be read from file descriptor n. If you use 0 for n, the passphrase will be read from STDIN. This can only be used if only one passphrase is supplied.
So in theory the functionality hasn't changed. :-/

What's hardware should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?

What's hardware or software should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?
1st question: when i try to do editing by using Premiere CS4 AVCHD sequence timeline, the edting monitor seems not smooth (like wearing goggles) & delay, and when i use AME to encode m2ts file (which not yet edit) to AVI file (about 1 hour), it take 2h 13min to finish, is it normal?
2nd question: i use mpeg2 HD 1440 file to do eding, the edting monitor also not very smooth but better than using m2ts file, after editing done, i try to encode these mpeg2 HD 1440 file (which edited about long 1 hr) to a New file mpeg2 1440 X 1080i HQ or even mpeg2 Pal DV HQ file, the encoding was not runthe encoding after wait for half an hour. How many hours it take usually????
3rd question: i use m2ts file video file to export as a Bitmap, 1 frame 1 picture bitmap, it take long time too, about 1 or 2min to finish encoding, if i export more than 1 picture, it take even more time, i have experienced it, 3 or 4 pictures need about 10 or 15 min to finish encoding. i used to using mpeg2 HD 1440 file (which edited file) to export frame as picture, it not run the encoding at all. WHY ????
i'm new in Premiere CS4,so i got many question about Premiere CS4, usually i use Premiere Pro 1.5 version
my computer is: Intel (R) Core (TM) 2 Duo CPU
                         E7400 @ 2.80 GHz
                         2.80 GHz, 2.00 GB RAM
                         Graphic Card: ATI Radeon X1650 series
                        2 Hard Disks in my computer (C Drive is 300 GB (not sata) , D Drive is 500 GB sata)
4th Question: Premiere CS5 & Premiere CS4 which one is better ???
5th Question: What's different ATI Radeon and NVIDIA Card, which is better, which u suggest to. What is different Graphic Card and Video Card ?? Should i install HD Video Card ????

I don't think a core-2 will work very well with AVCHD... you need at least an Intel i7 920... or whatever is current
My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built... since the GTX 285 is no longer sold, I would now go with a GTX 460 or whatever is the current "best bang for the buck" - AND I would buy 4Gig-by-3Sticks memory to be able to expand from 12Gig to 24Gig if needed
For my home hobbyist, family movies (which means that I am not trying to recreate Star Wars with video effects or many layers) AVCHD editing is "as smooth as spreading warm butter on hot toast" (also the MP4 video from wife's Flip camera)
My 3 hard drives are configured as...
1 - 320G WD Win7 and all programs
2 - 320G WD Win7 swap file and PPro projects
3 - 1T WD all video files... read and write

What is the Upgrade program used to upgrade NW04 to NW04s

Hi,
What is the Upgrade program used to upgrade NW04 to NW04s?
Thanks Sri

<b>SAPup</b> - Program to upgrade Web AS ABAP and related components BW,XI
<b>SAPJup</b>- Program to upgrade WebAS Java and related components EP.
Vijay Kothapalli

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install my upgrade without using the cd's?

I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?

PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

802.11 n support in Wism and WCS

Is the new wless standard 802.11n is supported in current shipments of Cisco WLC 44XX and WiSM ( 6500 wireless controller card) ?
Also I need to know whether is is supported in WCS 4.1 ?

Hi Nalaka,
Yes, 802.11n is supported on the WISM and WCS starting with the following releases in the 4.2 train;
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 4.2.61.0
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn4200.html#wp302677
The following new features are available in WCS 4.2.62.0
802.11n support-The introduction of the Cisco Aironet 1250 series access point, a business-class access point based on the IEEE 802.11n draft 2.0 standard. The access point offers combined data rates of up to 600 Mbps to meet bandwidth requirements. Cisco WCS display screens include a listing for configuring, managing, and monitoring 802.11n access points and their associated wireless LAN controllers.
The newest WLC and WCS 5.0 trains are now released as well :)
Hope this helps!
Rob

Can Adobe Photoshop CS5 upgrade be used on 2 computers or just 1?

Can Adobe Photoshop CS5 upgrade be used on 2 computers or just 1?

You can have it installed on 2 machines but you can use only one at a time (laptop/desktop, home/work).
Nancy O.

If one has a license for Adobe Acrobat XI is there a need for an upgrade to use FormsCentral

If one has a license for Adobe Acrobat XI is there a need for an upgrade to use FormsCentral

Why want you use FormsCentral?

I am a Photography subscriber does this allow me to upgrade and use LR(CC)

rying to find information about my subscription. Am using the "Photography" subscription. Does this allow me to upgrade and use LR(CC)

You might have to log out and log back in to the Creative Cloud App
Sign in, Sign out | Creative Cloud desktop app

Upgrading a used emac to mac osx

I shall purchase a used emac, g4, 700mhz,256 ram,40gb hd, mac os 9.2.2
I own mac os x 10.2 on two cd's. may i upgrade the used emac's os 9.2.2 with the two mac osx 10.2 cd's that I own?
thanks in advance
mike long
addison texas usa

If the OS is not installed on another CPU, then you can install it on any single Mac with which it is compatible.
The software license is indeed on paper, and you can visit the Apple website to find online copies of their license agreements.
In case you aren't aware the Apple Discussions are provided by Apple. Any discussion of illegal uses of software or hardware would violate the Terms of Use for the Discussions. Furthermore, were we to advise you to ignore Apple's license agreements then we would be guilty of abetting illegal acts. I presume you can understand why no one here will answer your query about violating the license. Any continued discussion of same will likely result in your topic being removed.

Upgrade wisms using WCS

Similar Messages

Maybe you are looking for