Upgraded to Yosemite, can't get an Extension manager that works with CS5

I am suing the CS5 suite: Photoshop, Illustrator, etc
Am trying to add some plugins to Photoshop and Extension Manager CS5.5 just crashes every time. Tried upgrading to EMCC and it won't open the extensions. It tells me I am need at least Photoshop 12.0. I thought CS5 was a later version.
I can't afford to upgrade when the suite works perfectly for me.
How do I get EM to work with the extensions I need?
The plug-ins I need are located here:
Adobe - Photoshop : For Macintosh : Photoshop CS5 Optional Plug-Ins (Mac)

Each version of Extension Manager only supports the corresponding verison of CS products. To install extensions for CS5 suite, you can only use Extension Manager CS5. Extension Manager CS5.5 or CC wouldn't work. But you have to download and install 5.0.3 update from Adobe Extension Manager Updates Downloads .

Similar Messages

HT204655 How can I get an Aperture version that works with 10.10.3?

Photos seems to be a minimal improvement to iPhotos and a terribly inadequate replacement for Aperture. Aperture is working with 10.10.2 on my new MAC, but when I installed 10.10.3 on my macbook, Aperture is crossed out. When I open it, I get a message "this version of Aperture does not work with OS X Yosemite". It also says I can get the correct version from the App store for free. when I look for Aperture on the App store it is not listed. What has Apple done?

I Called Apple and they walked me through the process of getting Aperture to work on OSX 10.10.3:
Find Aperture in your Applications folder then
Drag it to Trash and empty Trash (your Aperture library is not affected by this).
Restart your computer
Log on to App Store, and find your Purchases
locate The Aperture application.
It should show Install, and not Upgrade at this point.
click on that to download Aperture 3.6
instal that in your Applications folder.
Of course, this only works if you purchased Aperture from Apple, and registered it with them.
This is worked for me and I now have Aperture 3.6 running on Yosemite. The drawback here is that there is no further support will be offered for Aperture, so another alternative will eventually be required. I took advantage of an offer from Adobe, and downloaded Lightroom CC and Bridge CC (Creative Cloud). I already had Photoshop CC, but they bundled it all together for me at a very reasonable price. All these applications will use your Aperture and iPhoto libraries should you wish to import them into the application, so there will be no duplication of Libraries. Hope this helps you like it did me.
Thank you for posting your solution. I'm sure it will help others in the future.
You know, many people continue to use discontinued software for years without problems. There are millions of people out there still using iMovie HD 06 and iDVD because there is nothing better.

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Can't get my iphone4 AirPrint to work with Canon mx712 printer

Can't get my iphone4 AirPrint to work with canon mx712 printer
I've reviewed all network, printer, phone settings

airprint basic http://support.apple.com/kb/ht4356 see if that printer is compatible.
airprint troubleshooting http://www.apple.com/support/iphone/assistant/airprint/
If it is not compatible then you will need to look at the appstore to find something compatible to be able to print.

Can't get brand new WRT610N to work with Billion 7404 VGOM

I already posted this on whirlpool, here are my posts:
Hey All,
Just bought a LinkSys WRT610n and I can't get the darned thing to work with my Billion 7404VGOM.
At the moment I just want to network my pc to the LinkSys, LinkSys connects to my 7404 which is connected to the internet.
I've tried using DHCP automatic connection with the WRT610N, but it just doesn't talk route any traffic to the 7404...and thus nothing to the internet.
All cables and plugged in correctly, I tried the auto setup also but just can't figure the thing out.
Any suggestions?
Cheers,
Ken
I can't ping my 7404 modem from my PC when connected through the WRT610N. I can ping the WRT610N successfully, but when trying to ping the 7404 the WRT returns "Destination Host Unreachable"
7404 is function fine if I just connect to it directly though.
I don't understand, even If I couldn't get DHCP info working or syncing between both devices, it should still be able to ping it.....?
Right, I just plugged in my netbook via network cable into the "Internet" port on my WRT610N. I try to ping the router using this (it doesn't get any DHCP settings from the router, so I just set it manually and use the WRT as default gateway ip)...I just get request timed out.
I should be able to do this right?....starting to think my WRT610n has a dodgy "Internet" port.
Any suggestions?

If you connect your notebook via network cable into the "Internet" port on the WRT610N and if you ping the router it will not reply...also your Notebook will get any DHCP setting with this connection...However what exactly is Billion 7404VGOM ? A modem i guess!! Who is your ISP ?

I have an older G5 tower Power PC and the OS 10.5.8, but the firefox and safari browers are no longer supporting this computer. How can I download an older version that works with this computer?

I have an older G5 tower Power PC and the OS 10.5.8, but the firefox and safari browers are no longer supporting this computer. How can I download an older version that works with this computer?
Or what is the newest OS system I can load onto this computer?
I think it is from 2006

Hello,
10.5.8 is the highest OSX it can run.
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions.

Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now thanks

Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now thanks

quicken should work with lion.
Quicken Essentials will work with Lion. Most people that have used Quicken for a while (i.e. Quicken 2007) have found that Quicken Essentials isn't much better than a basic spreadsheet. It is a significant step down from previous versions and does not offer many of the features previously offered. Right now, it seems like the two most common options are iBank and MoneyDance.
Frankly... this is a major opportunity for these companies. The largest commercial distributor of this type of product has been Intuit (Quicken). That makes it hard for any other company to get any of that market as so many people were already using Quicken and may have had years of data stored in it. Now, with Quicken effectively out of the picture, it's a great chance for another company. Just imagine if iPhones were suddenly off the market. That would give other manufacturers a tremendous opportunity since they wouldn't have to fight an up hill battle against a market giant.

How can I get my Canon A620 to work with Windows 7

Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ?
I'll keep looking around.
Steve

If you need photo software and don't have any you can download Canon software here.
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
If you decide to connect the camera via USB you don't need a driver; its built into W7.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Can't get Bose computer speakers to work with my Mac pro lion

I have just bought the Bose Companion 11 computer speakers for my Mac Book Pro. They are set up correctly (in the headphone jack) and they play my itunes music beautifully. However, when they are plugged in I get no sound from internet videos, etc. I have to take the plug out of my headphones jack and then I get the sound from my computer but not the speakers. Can anyone help ..I don't know what I am doing wrong...or how to get the Bose speakers to work with all my computer (internet content). I looked at system preferences and the Output says headphone port but the input says internal microphone (built-in).
Please help.
Thank You,
Karen

Don't worry about offending me...I am, admittedly, no computer whiz! I have had speakers before....but I took these in to Best Buy...with my computer (Where I bought them) and the "Geek" person plugged them in and they worked.
What we did notice was that the jack that goes into the plug just below the left speaker plug was loose. So I brought it home and it worked! Then tonight I turned on my computer and no speaker input, so I checked the back of the right speaker and that plug (if that is the right name?) had fallen out...so re-connected it and they work! So, I guess I may have to tape that plug in ...or what do you suggest??...so it doesn't keep falling out.
Thanks so much for answering me.
Karen

Can anyone get the SimpleVideoPlayer demo to work with 6u13?

I have tried it on a Vista machine and a Windows Server 2003 machine both with Java 6 Update 13 and the result is the same:
playing http://sun.edgeboss.net/download/sun/media/1460825906/1460825906_2956241001_big-buck-bunny-640x360.flv+
Error with Media: MediaError: media unsupported:com.sun.media.jmc.MediaUnsupportedException: Unsupported media: http://sun.edgeboss.net/download/sun/media/1460825906/1460825906_2956241001_big-buck-bunny-640x360.flv+
* mediaSourceURL=http://sun.edgeboss.net/download/sun/media/1460825906/1460825906_2956241001_big-buck-bunny-640x360.flv*
Can anyone get this demo to actually work? If so, what's the secret?
Thanks,
The Gibbon

Can someone please try it and let me know?
This is the link:
[http://javafx.com/samples/SimpleVideoPlayer/index.html]
Thanks,
The Gibbon

I can not get 3D surround sound to work with my X-Fi and headhones please he

I have an X-Fi Xtrememusic soundcard and I have been unable to get possitional sound working consistantly with two sets of stereo headphones. I have the latest drivers installed and have creative audio console set to: headphones, game mode, CMSS 3D and I still have no possitional sound at all. Noises seem to come from above my head I can't tell right from left or forward from backward in other words I am completely lost as to were sounds are coming from in games. I used to be able to get possistional sound to function by changing headphones in the creative audio console to 2. or 4. speakers.
If I set the mode to 5. or higher the sounds in games (footsteps, weapons fire) would become heavily muted and hard to hear while I would gain better positional sound for other players and now this does not work at all. I have also tried disabling sync to windows control panel and changing its sound options and there have been no beneifts from doing so. In settings other then stereo headphones no sound was produced at all while others stopped sound coming from one of my headphone speakers. I am at a total loss I can not think of anything thing else to fiddle with.
My system specs: Athlon 64 4000+ San Diego, ASUS A8N-E mobo, 2GB DDR400 2.5CAS Buffalo ram, EVGA 7800GT CO, X-Fi Xtrememusic. No popping or crackling sound at least. Thank you you reading this.
<SPAN class=time_text>
<SPAN class=time_text>
<SPAN class=time_text>
Message Edited by Blah-and-Feh on 04-5-2006 :50 PM

Hay everyone thanks for the advise but i was finally told by one of the support personnel that I actually need the dri've bay insert that comes with the fidelity in order to get the cmss 3d to work with the headphones.
I only purchased the extreme gamer not the extreme gamer fidelity and that is why i cant get the cmss 3d to work but it still advertises on the box that you can use the cmss 3d and get that feature. :angry:? Should have done homework but i was out Christmas shopping and i went off of what the box advertised. This is very unusual for me to shop compulsi'vely. The funny thing is that everything else on the box that is advertised such as the increase of the CPU and the EAX HD features are able to be used. Im very upset about this because I particularly bought this card for the cmss 3d. I really don't know if i will ever recommend another Creative Product to any of the people i do computer repair or gamer builds for, unless this gets resolved and the only way to resolve this is to get the cmss 3D to work. By the way I did do a full reinstall even with clean boot so that isn't the problem. I'm really upset and ready to return this product to Best Buy unless this can be resolved. Any admin that comes across this please send me any ways of getting a hold of anyone that can help. Tks and hope yall had a wonderful Thanksgiving.
Creatively toastedMessage Edited by toast on -24-200608:48 PM

How can we get the web cam to work with sykpe or any out going calls

can get the web cam to work with skype

Hey there,
What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't get the zte mf627 to work with 10.9.2

Hi I have an older 3 ZTE MF627 3G dongle. Cant get the loaded software to work with 10.9.2 on Macbook Air. Also cant find a download for new sofware for it to work....

All USB network devices are to be avoided, if possible. They depend on complex third-party software that's often of poor quality and is prone to cause system instability. The software is rarely, if ever, updated, and may stop working entirely when OS X is updated. Use a mobile Wi-Fi or Bluetooth hotspot, either a mobile phone or a dedicated device—no software needed.
If you have no choice but to use the device, your only recourse is to the vendor.

Upgraded to Yosemite, can't get Mail.

I upgraded to Yosemite from Snow Leopard, 10.6.8. I immediately experienced a problem importing mail to Yosemite. Upon opening Mail, the screen reads, "Mail Message Import". After attempting to import mail from inbox per instructions, I received a message that "Upgrade Failed." I followed the instructions to launch Mail Import Assistant. I then received a message: "Your Mail Index has been damaged. To repair it, quit Mail." I then quit Mail and repeated the sequence without success. Upon repeating the sequence, I get the exact same instructions and results. I'm stuck in a loop and have no Email capability at all and no obvious way to correct the situation. Help!

Try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
Reindex messages Mavericks/Yosemite

Can't get LW 4/600 PS working with iMac 10.3.9 with Assante and Netgear Hub

Hi,
I have an iMac G4-800 MHz. A few years ago I had my Laserwriter 4/600 PS working with it using a Netgear EN104 ethernet hub(so I could be on-line at same time) and an Assante Talk (ethernet-to-serial). Since then I disconnected all, put printer and stuff away and upgraded to Panther and wiped computer. I just want to start from scratch because I just can't seem to get it working. I can get on-line but can't get printer to work. Have tried to turn Appletalk on, have highlighted the Appletalk box and then "applied" but I still get prompt in Printer Set-up that it "isn't turned on and printer can't be found. If anybody can just guide me through from square one it would be greatly appreciated.
Many thanks,
Tim

I want to say up front that the correct way to do this is to get a router in place of the hub.... but I think it can be done.
Read:
http://docs.info.apple.com/article.html?artnum=106298
http://docs.info.apple.com/article.html?artnum=106614

Upgraded to Yosemite, can't get an Extension manager that works with CS5

Similar Messages

Maybe you are looking for