Upgrading Local Development From OC4J 10.1.2 to 10.1.3

We are in the middle of upgrading our local development environments to 10.1.3.
Previously, to deploy an application to my 10.1.2 environment, I would use Maven (and a war:webapp target) to deploy to a setup as specified by application.xml:
<web-module id="acap" path="file://C:/svn/acap 1.3.3/target/acap" />
and http-web-site.xml:
<web-app application="default" name="acap" root="/acap" />
Unfortunately, I need to 10.1.3 upgrade to support Java 5.0 development. I don't know how to configure 10.1.3 manually, and don't want to compile a WAR each time and deploy via 10.1.3's enterprise manager, which is much more time-consuming.
Can anyone give me any pointers on handling the upgrade? Otherwise, I'm going to have to switch servlet containers from OC4J, which would be bad since the app is ultimately going to be deployed to Oracle Application Server...
Jason

Hello,
You should be able to use the same mechanism to deploy in 10.1.3.x, except that you will use the default-web-site.xml file (instead of http-web-site.xml)
In the same time it is probably better to use the command line (admin_client.jar) or ant task to deploy your war.
Regards
Tugdual Grall

Similar Messages

How to upgrade SQL Developer from 1.1. to 1.5?

Hello,
I downloaded 1.5 and tried starting it in order to upgrade from 1.1 which came with the Oracle 11g package.
It shows the splash screen briefly then it disappears.
How can I install/upgrade it?
Thanks,
Gabor

Hello Jim,
Thanks for the response.
I did what you suggested. Yes, it does open the console window and tons of messages scroll through it while the splash screen is shown. The both the console window and the splash screen disappear and that's it.
The OS is XP SP2.
The exact version of SQL Developer is 1.5.1.54.40.
Regards,
Gabor

Jms upgrade from oc4j 10.1.2.2 to 10.1.3

hello,
I have recently upgraded from oc4j 10.1.2 to 10.1.3 - and everything works ok within my apps apart from JMS messaging.
I have 2 apps within the same oc4j container, the first produces topic messages
ObjectMessage message = session.createObjectMessage(obj);
The second receives the messages - by implementing the MessageListener onMessage interface.
Everything worked perfectly under oc4j 10.1.2 but although I find no errors under 10.1.3 - the receiver never gets the message.
Can you help direct me how to debug this? - or provide probable areas of investigation?
thank you

Thanks Rocky. It was your thorough discussion that prompted me to look at my TopLink sessions.xml configuration more closely, since my existing config did not utilize the transport class you mentioned. As it turns out, I was utilizing the depricated cache coordination mechanism (<cache-synchronization-manager> instead of <remote-command>). With a new configuration as follows, everything is working well:
<remote-command>
<commands>
<cache-sync>true</cache-sync>
</commands>
<transport xsi:type="jms-topic-transport">
<topic-host-url>ormi://localhost:23791/ems</topic-host-url>
<topic-connection-factory-name>jms/Topic/ToplinkCacheSyncConnectionFactory</topic-connection-factory-name>
<topic-name>jms/Topic/ToplinkCacheSync</topic-name>
<jndi-naming-service>
<user-name>oc4jadmin</user-name>
<password>oc4j</password>
<initial-context-factory-name>com.evermind.server.rmi.RMIInitialContextFactory</initial-context-factory-name>
</jndi-naming-service>
</transport>
</remote-command>
Thanks for your contribution,
--Todd

Best way to upgrade the local repository from 11.7.3 to 12.2.3.3 DS 3

Hi, we are going to upgrade our DI 11.7.3 to DS3 - 12.2.3.3 in Sep. I found out there are different ways to upgrade the local repository from the SAP doc and tech support. I try to find a best and safe way to do it. If anyone had experince and inputs on this. It would be great appreciated. It seems there are these options:
we all agree that need to back up the repostiry db, and export the repository to atl file.
Option 1:
Upgrade the repository during the Data Services installation. But the tech support said there are times where this does not work as expected and Option 2 below needs to be implemented.
Option 2:
a) Export the local repository, via 11.7.3 Designer, to an ATL file.
b) Uninstall 11.7.3.
c) Create a new database in SQL Server to use with 12.2.3.3. (Optionally, use the existing 11.7.3 database. If you do, make a backup of it before making any changes).
d) Install Data Services 12.2.3.3 and reference the database created in step "c" above during installation (select the Create option).
e) Log in to the new local repo, via 12.2.3.3 Designer, and import the ATL that was exported in step "a" above.
Option 3:
a. Create a new database u2013 20 MB space
b.Create a new repo in 11.7.3 point to ds_local via Repository Manager (click create)
c.Log in 11.7 designer and Repository import from out.atl
d.Install 12.2.3.3 without upgrde the repostory
e.use epository manager in 12.2.3 to upgrade the new repository

Hi.
If you import the 11.7 atl into a 12.2 Designer you will face a warning message like this:
"The version 11.7 of the ATL file <c:\export.atl> is lower than the repository version <12.2>.
To update an ATL file, import it into a repository of the same version then ugrade that repository"
So, the correct method to upgrade the Data Integrator 11.7 repository to Data Services 12.2.x is the following:
- Export the complete Data Integrator 11.7 repository to ATL.
- Create a NEW Data Integrator 11.7 Local Repository.
- Import the ATL created in step 1 to the NEW Data Integrator 11.7 Repository. At this point you have two identical local repositories.
- From the Data Services 12.2.x system, open Repository Manager.
- Enter the Database connection information to the NEW repository created in step 2.
- Select UPGRADE, to upgrade this repository to support Data Services 12.2.x.
- Log into Data Services Designer to start using this Local Repository.
Regards,
Leo.

Easy Question: Copy pcui_gp/xssfpm from DTR track to local development

Hi Experts,
I have to create one custom Web Dynpro program in Local Development. For this program, pcui_gp/xssfpm and pcui_gp/xssutils are needed.
NWDI is configured. I can see pcui_gp/xssfpm and pcui_gp/xssutils in one of the DTR tracks. I am not allowed to do any development in DTR track.
I have to carry out development in Local Development. How I can copy pcui_gp/xssfpm and pcui_gp/xssutils from DTR track to Local Development.
Regards,
Gary

Hi Gary ,
-go to Development Configuration perspective in NWDI.
-go to inactive DCs.
-right click on the components you need.
-choose create project from the context menu.
then it will be shown in your local development
regards,

Importing from Local development.

Hi Friends,
I have a WebDynPro Application developed on my Local System.I need to IMPORT this application into my Development Component(DC).
Can i know the procedure if atall it is possible to do the same.
Thanks and regards,
Chandrashekar.

Hi,
If you have created your project as a plain web dynpro project, then follow the steps given in "Migrating Local Web Dynpro Projects",
http://help.sap.com/saphelp_nw70/helpdata/en/9e/1c200ac164cf4a942f2dacdf3359e9/content.htm
If you have created your project as a "Local Development Component", the conversion to DC in JDI is still going to be difficult as it will involve the same manual task.
Regards
Srinivasan T

CMS fails - Error 500 - since upgrading to SP19 (from 15) - [RESOLVED]

We have been using XI3.0 for almost two years now, however after patching to SP19, our CMS system has failed - Error 500:
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - (class: com/sap/cms/pcs/conf/core/plugin/DefaultTrack, method: readTrackConfiguration signature: (Ljava/lang/String;Ljava/lang/String;)Lcom/sap/cms/client/types/config/TrackConfigurationObject;) Incompatible object argument for function call
    at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
    at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
    at com.sap.cms.ui.wl.Custom1.getConfigurationDataOfTrack(Custom1.java:10038)
    at com.sap.cms.ui.wl.Custom1.setSelectedTrack(Custom1.java:2823)
    at com.sap.cms.ui.wl.Custom1.prepareTransportStudio(Custom1.java:3585)
    ... 46 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; {12F65990-D65C-C5FA-1449-43FE4509287F}; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4019.00.0000.20061005104024.0000 (release=630_VAL_REL, buildtime=2006-10-26:20:43:46[UTC], changelist=419718, host=PWDFM026)
J2EE Engine 6.40 patchlevel 106831.313
Java VM Java HotSpot(TM) Server VM, version:1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Other
Session Locale en
Time of Failure Tue Jan 30 09:30:57 UTC 2007 (Java Time: 1170149457113)
Web Dynpro Code Generation Infos
sap.com/tcSLCMS~WebUI
SapDictionaryGenerationCore (unknown)
SapDictionaryGenerationTemplates (unknown)
SapGenerationFrameworkCore (unknown)
SapIdeWebDynproCheckLayer (unknown)
SapMetamodelCommon (unknown)
SapMetamodelCore (unknown)
SapMetamodelDictionary (unknown)
SapMetamodelWebDynpro (unknown)
SapWebDynproGenerationCTemplates (unknown)
SapWebDynproGenerationCore (unknown)
SapWebDynproGenerationTemplates (unknown)
sap.com/tcwddispwda
No information available
sap.com/tcwdcorecomp
No information available
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - (class: com/sap/cms/pcs/conf/core/plugin/DefaultTrack, method: readTrackConfiguration signature: (Ljava/lang/String;Ljava/lang/String;)Lcom/sap/cms/client/types/config/TrackConfigurationObject;) Incompatible object argument for function call
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
     at com.sap.cms.ui.wl.Custom1.getConfigurationDataOfTrack(Custom1.java:10038)
     at com.sap.cms.ui.wl.Custom1.setSelectedTrack(Custom1.java:2823)
     at com.sap.cms.ui.wl.Custom1.prepareTransportStudio(Custom1.java:3585)
     at com.sap.cms.ui.wl.Custom1.wdDoInit(Custom1.java:299)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdDoInit(InternalCustom1.java:990)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.doInit(DelegatingCustomController.java:73)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:436)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:374)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:403)
     at com.sap.tc.webdynpro.progmodel.context.MappedAttributeInfo.initAttributeMapping(MappedAttributeInfo.java:319)
     at com.sap.tc.webdynpro.progmodel.context.MappedAttributeInfo.init(MappedAttributeInfo.java:278)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:674)
     at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:659)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:539)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:397)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:554)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:421)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:135)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:404)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:618)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I have some development to move through today as part of aproject, but we cannot due to this.
I have checked that the Data in ExchangeProfile is correct. No users are locked. I have started the CBS applications not started in Java Admin Console.
It worked before upgrading to SP19 (from 15).

Hi,
I hope, please try this error in SAP Notes
like
Note 907721 - "Web Dynpro Client" missing in SAP GUI 6.40
similar Note 843804 ,
Regards
Chilla..

Upgraded our system from ECC 6 to 6.04 (EHP4).

Dear All,
We have upgraded our system from ECC 6 to 6.04 (EHP4).
There are many request in old development server which are in local request now .
We want to transport those requests to new development server which is upgraded one.
Can any one let me know is there any standard way of transporting these requests from old Development system (6)to new one(6.04).
Thanks
Anuradha

Hi Sahil,
Looks like latest EHP installer concentrate more on downtime minimize strategy. We have only 3 options available as follows.
1. Standard resource use
2. High resource use
3. Manual selection
Please take a look at below thread. Let's see what other experts comment on this.
/thread/1458520 [original link is broken]
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Nov 19, 2011 7:57 PM

TS1363 I was upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7. The iPhone hung. It is no longer visible by iTunes on Win 7

While upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7, the iPhone hung. I could not get iTunes to find it and Win 7 does not see it.
When I connect the iPhone to the USB, Win 7 issues the welcome sound, but that is it. The same happens when I disconnect iPhone.
The Devise Manager has the Apple Mobile Device USB Driver correct without any problem. I updated this driver called usbaapl64.
The iPhone is still hung.
I restarted the iPod service
I restarted the Apple Mobile Device Service
I tried to empty and delete the temp directory in C:\users\myname\AppData\Local\ but could not
The iTunes I am using is the latest version
I updated the Apple Mobile Device Driver as stated above correctly
The iPhone is still hung and is not recognized by Win 7 or iTunes, so I cannot restore the OS to the previous working version
What else can I do to restore the previous working OS on my iPhone 4

I was connecting the iPhone 4 to a USB 3.0 port. I was told by Apple Express Support (at US$29.99) not to use USB 3.0 and to use USB 2.1 instead.
If you are connecting your iPhone to the computer using a USB 3.0 port, disconnect it immediately. iPhones will lock up if you try to update while using a connection through a USB 3.0 port.
Disconnect the iPhone from the computer
Go to Device Manager and find the connected USB port. Click the mouse right button and update the driver
Shut the iPhone by pressing the sleep button and the home button concurrently for some time
Move the USB cable to a USB 2.1 port or older without the iPhone.
Restart iTunes.
Connect the iPhone
Your computer should recognize the phone and reloads the correct USB 2.1 driver (Apple Mobile Device)
Then iTunes should recognize the iPhone and starts reloading the firmware.
When that is complete it may ask if you wish to restore, naturally you say YES
iTunes will restore the iOS
Using iTunes, restore the latest backup to get your data back.
When all of the above is completed. Start enjoying your iPhone.
If the above does not work. Throw your iPhone out of the window and get a replacement Android phone.

I upgraded MacbookPro 2009 from 10.6.8 to Yosemite. Beforehand I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU. I also deleted half of my photos from the default library on my laptop, lets call it DE. I then in

I upgraded MacbookPro 2009 from 10.6.8 to Yosemite 2 weeks ago. My iphoto is now a nightmare. i went to our local apple retailer but they could not help either. Perhaps someone can help. Beforehand the OS upgrade I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU with 50GB. I also deleted half of my photos from the default library on my laptop, lets call it DE, now with about 20GB, to gain space. I then upgraded to Yosemite.
I have also installed since a long time Iphoto Library Manager 3.8.6. (this may be the cause of the problem as it was not upgraded and perhaps thus not compatible with iphoto 9.6 which I have now after the upgrade to Yosemite) It all worked fine before the upgrade, switching in iphoto between the two libraries DE and BU.
It also worked fine after the upgrade for a few days. At one stage Iphoto asked me to upgrade the iphoto version as it otherwise could not read the photos when I tried to load the BU library into iphoto. I did click yes to upgrade iphoto. As a result I became a brand new but totally empty library, no photos.
BU was still on the external disc, however the "Master" file was empty. We fortunately discovered all photos were in another file called Old Master, also under BU. We made another copy of the Old Master file onto the external disc. Lucky we did, because shortly afterwards we could not open anymore the BU file thus had no access to anything in there. Now I have 17000 photos in a file called Old Master on my external disc and another smaller library DE on my laptop. When I tried to import the photos from Old Master into a new iphoto library it was very messy. All events dates were mixed up, many photos were imported twice. I have no idea whether all my 17000 photos have been imported.
Can anyone suggest what is the most time efficient way? How do I best import my 17000 into a new library ensuring I don't loose any in the process. I do not wish sorting through 17000 photos for a week or so. Shall i also get a new iphoto library version now? Thank you for anything that may work.

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

EJB 3.0 local lookup from POJO in WLS Cluster

Hello,
I'm developing on JDeveloper Studio Edition Version 11.1.2.3.0 and deploying to a WebLogic 10.3.5 Cluster.
I have developed an EJB 3.0 stateless session bean and I need to invoke it from a POJO within the same EAR, specifically an ADF EntityImpl Class.
Up to this point, I've only invoked EJBs using injection via an @EJB annotation, and have never done a full lookup.
Could somebody please provide a verbose instruction on how to obtain invoke an EJB 3.0 SLSB via local interface from a POJO when running on a WLS cluster?
As I see it I have two problems to solve.
1) Obtaining a reference to the initial context in a cluster.
2) Using that to get a reference to the local interface of the bean, which I don't think is on the global JNDI tree.
Many thanks.
Edited by: user576183 on Dec 5, 2012 4:16 PM

Re: Unable to lookup in InitialContext a Local EJB in Weblogic 10.3.5 (EJB 3.0)

Deploying ear application - migrating from OC4j to Weblogic

I am trying to migrate application from OC4J to weblogic server. Apart from usual differences in descriptors, structure of EAR etc. I came across unusual error:
"both the remote home and remote component interface must be specified. Currently, only one of them is specified"
It is about deploying session bean. Usual EJB3 stateless session bean with local and remote interface, deployed without any problem on OC4J and JBoss. Of course, I know home interfaces are something to do with EJB 2.1, but this is EJB3 application and, I guess, Weblogic has full support for it. Does it? :)
Anyway, is there workaround? Or am I missing something? I don't have to tell you what problems we will be facing if I have to restructure whole application with dozens and hundreds of session beans.
Thanks a lot!

OK. I just want to make sure that there are no problems with the deployment descriptors.
To pin point the problem do the following in JDeveloper:
1. Create a simple EJB 3.0 session bean
2. On that session bean create a Sample Java Client.
3. Run the Session Bean
4. Run the Client
5. If both are running fine, compare the deployment descriptors from the sample and your real application.
--olaf

What do I have to purchase to upgrade my Mac from 10.4.11 to a 10.5.8 or later?

What do I have to purchase to upgrade my Mac from 10.4.11 to a 10.5.8 or later?

Leopard System requirements
You must have a Macintosh computer with:
an Intel processor or a PowerPC G4 (867 MHz or faster) or G5 processor
a DVD drive >built-in FireWire
at least 512 MB of RAM (additional RAM is recommended for development purposes)
a built-in display or a display connected to an Apple-supplied video card supported by your computer
at least 9 GB of disk space available, or 12 GB of disk space if you install the developer tools
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
You can upgrade directly to Snow Leopard if your hardware supports it without first installing Leopard. Leopard is no longer available but you can order a copy via Apple Care if they are still available - $129.00. Otherwise, you need to find a third-party vendor such as eBay or Amazon.com.
The price for Snow Leopard is $29.00. It's available from any Apple retailer or the Online Store.

Importing Local DCs from hard disk into NWDS

Hi..
I have a Local Webdynpro DC zipped file in my .dtc folder under a package folder (say com.sap).
I have extracted this file under this folder.
Now I need to extract this in my NWDS local development.
I am not using NWDI... I am using only Local DCs.
I want to import the file into a Webdynpro Local DC into my NWDS..
Please provide your valuable suggestions...
Thanks and Regards,
Sayan Ghosh

Hi Sayan,
Go to the Development Configurations Perspective(Window->Open Perspective->Development Configurations)-> Local Dcs->MyComponents->here you can see all your DCs, Right click on the DC->Create Project-> DC will be created. You can see that DC in the Webdynpro Perspective.
Or
You can create the the new DC with the required name, once it is done then copy the src folder from the old DC to Newly created DC->Reload DC.
Thanks n Regards,
Jhansi Miryala

How to read a local file from Applet Code

Hi
I am developing a application and i want to access a local file from the applet
So pls help me in coding for this

You can't do that, at least not with an unsigned applet.
Sign your applet and it should work just like normal file access.

Upgrading Local Development From OC4J 10.1.2 to 10.1.3

Similar Messages

Maybe you are looking for