Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

Dear SDN,
We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
Thanks n Regards ,
Anantha Raman E.

Thanks Mr.Mohan
We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
Pls help us in this regard
Whether we have to migrate or what...

Similar Messages

ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7

Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
Amith

Below entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103

Document to upgrade the database from 10.2.0.5 to 11.2.0.3

OS:Linux
Database:10.2.0.5
I have standalone and RAC database running on 10.2.0.5 version and need to be upgrade it to 11.2.0.3 . Could someone let me know about the upgrade doc. Both manual upgrade and DBUA doc.
Thanks in advance.

Hi,
You can check following MOS Doc
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 837570.1 : Complete Checklist for Manual Upgrades to 11gR2
Note 870814.1 : Complete checklist to upgrade the database to 11gR2 using DBUA
HTH

Upgraded the Database from 10.2.0.4 to 11.2.0.2 including statistics

Hi,
Recently I have upgraded Few Servers from 10.2.0.4 to 11.2.0.2 on Sun Solaris 64Bit X86.
BANNER
Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionBefore the Upgrade We generated the stats at system level and Schema level and exported the stats into Table.
Database Upgrade was done successfully
Upgraded the System stats
Upgraded the Stats table and imported back to Schema's
Tested with Queries and they were OK
But some of the Queries which have DB Links started taking Hanging and seen wait events
WAIT #18446741324892168800: nam='asynch descriptor resize' ela= 3 outstanding #aio=0 current aio limit=4294967295 new aio limit=261 obj#=-1 tim=581083891935
WAIT #18446741324892168800: nam='SQL*Net message to dblink' ela= 4 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=581084016896
WAIT #18446741324892168800: nam='SQL*Net more data from dblink' ela= 22 driver id=1413697536 #bytes=4 p3=0 obj#=-1 tim=581084030942 So I raised call with Oracle and gave me patch for fix "asynch descriptor resize" but the problem still exist with below wait events
WAIT #18446741324892168800: nam='SQL*Net message to dblink' ela= 4 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=581084016896
WAIT #18446741324892168800: nam='SQL*Net more data from dblink' ela= 22 driver id=1413697536 #bytes=4 p3=0 obj#=-1 tim=581084030942 Normally in the 10g this Query used to come out under second
So I used the Hint 10.2.0.4 in the Query and the output came under second.
So I updated the optimizer feature parameter to 10.2.0.4 and then Queries started working fine.
In the Test Environment I was able to reproduce the same problem.
Test Case
Took the physical copy for the Upgraded DB
Run the same Query with 11.2.0.2 optimizer and saw the same problem
Deleted the Schema level stats
Generated the new stats
Executed the same Query(Out came under second)
Oracle Support Still working on this issue
As any one has faced this issue.
Regards
NM

You can do this also
1. Export 3 schemas with grants=y rows=N and import the data schema structure with grants
2.Check the log file for missing roles and create those roles using from dba_role_privs..etc
3. Import the data ignore=y option
Hope this helps
http://www.oracleracexpert.com
Click here to learn [Oracle data pump export/import with examples.|http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html]
Click here to learn [Data Pump Export modes and interfaces|http://www.oracleracexpert.com/2009/08/data-pump-export-modes-and-interfaces.html]

Upgrade the database from SE to EE

Hi all,
is it possible to upgrade the 10.1.0.4 database from Standard Edition to Enterprise Edition without new installation?
Regards,
Leonid Pavlov

Well you need to install the Enterprise edition after de-installing the standard edition (either in same OH or a new one).
You can refer Metalink note 117048.1 for complete process.

Upgrading a database from 8.1.6 to 9.2.0

Hi,
Oracle provides scripts to directly upgrade a database from an older release to the latest release. In the 9.2.0 installation, scripts are available to upgrade from 8.0.6, 8.1.7 and 9.0.1. No scripts is present for upgrading my 8.1.6 database to 9.2.0.
Can somebody suggest a way to achieve this upgrade?
Thanks
Yash

Unfortunately, you will have to upgrade to 8.1.7 or 9.0.1 before upgrading to 9.2.0. Oracle appears to be supplying upgrade scripts for terminal releases.

Upgrading a database from 8.1.7.2 to 10gR2 on another machine

Hello all,
We have database DB1 (in version 8.1.7.2) on MACH1 (AIX 4.3) and I'd like to move this database to another machine called MACH2 (AIX 5.3) as Oracle10gR2 version (Oracle8.1.7.4 and Oracle10gR2 bianries are already installed on MACH2).
MACH1 will be scrapped after this operation.
Since I don't need to upgrade the Oracle binaries of MACH1 and I just would like to upgrade the database DB1 from 8.1.7.2 to 10gR2, can I do the following to achieve this:
On MACH2, there is a 8.1.7.4 database called DB2: I do an export of DB1 and import it into DB2.
Then, I create a new database DB3 in version 10gR2 on MACH2.
Then, I export DB2 and import it into DB3.
Is this enough to finally have the database DB1 change version from 8.1.7.2 to version 10gR2, or are there other steps to take care of?
Thanks a lot for your feedbacks.
Cheers

while for "full" exp/imp we have to pass by 8174 as an intermediate stage.That's not true, you need at least 8.1.7.4 for a direct upgrade using DBUA, export/import doesn't have such a prerequisite.
Despite of this I always prefer schema export/import of pure user data, especially from 8i to 10g there are so many changes (as one example think of the new tablespace SYSAUX,which now holds objects earlier located in the SYSTEM tablespace). That makes a full export not useless, but - let's say - less useful.
Werner

How to upgrade repository database from 10.1.0.4 to 10.2.0.3?

I installed EM10gR3 on Linux. I chose Install Grid Control using a New Database option. The database is 10.1.0.4. How can I upgrade repository database to 10.2.0.3? Shall I install Oracle 10.2.0.3 and then use dbua to upgrade?
Thanks,
Kevin

Yes. But first of all check that the 10.2.0.3 Repository is compartible with 10.2.0.3 database. You will find this in the Installation Guide. Then use any upgrade type (DBUA, Upgrade Script etc) to upgrade the database.

I've upgraded the Discoverer from release 4 to 10.2.0.3

Hi guys,
I've upgraded the Discoverer from release 4 to 10.2.0.3 on two of my test systems.
the difference between the two test system is that one is SSL enable and the other one is not.
On the test system that is not SSL enabled users can access Discoverer via EBS fine but
on the tests system that has SSL enabled users cant so now they have to go directly to
the Discoverer link to access it. I've logged an SR with Oracle and they told me to edit the ssl.conf file
for the Discoverer side which I did and I placed the file directories and the locations of the certificates in that ssl.conf.
How can I get Discoverer to through EBS when SSL is enabled.
Thanks

Hi,
Firstly, you need to check that the ICX: Discoverer Launcher system profile has the correct https url to launch Discoverer.
Rod West

Upgrade DB2 database from 9.1 to 10.5

Dear All,
We are using Ecc6 with db2 database 9.1 now we want to upgrade database from 9.1 to 10.5. Is it possible to upgrade database & what are those steps are required for this operation. We are waiting your valuable support in this regards.
Regards
Abhijit

Hello,
Please check the guide https://websmp201.sap-ag.de/~sapdownload/011000358700000843422013E/DB6UpgrGuide10_5_upd.pdf
Database-Related Restrictions
If you are running DB2 for Linux, UNIX, and Windows Version 9.5 or lower, you first have to upgrade
the database to DB2 Version 9.7 or 10.1 as described in the relevant upgrade guide at:
http://service.sap.com/instguides Database Upgrades DB2 UDB
BR,
K.

Resore the database from Tape to a new directory

Hi
can i use rman to resore the database from Tape to a new directory (not the database directories)
is that will work
run{
allocate channel.....
restore database to 'path';}
Thanks for any contribution

This will not work.
You need to code
set newname
commands in your rman script.
The syntax is
set newname <filenumber> to '<filename>'
As far as I recall this is a scenario which is documented in the RMAN documentation for your unknown version of the database.
Sybrand Bakker
Senior Oracle DBA

Migrate and Upgrade ReportServer database from SQLServer 2012 to SQLServer2014

Hi,
Today I migrated one reporting service from sql server 2012 to new server which running sql server 2014.
Firstly I back up encryption key and restored to new server, then follow the https://msdn.microsoft.com/en-AU/library/ms156421.aspx (e.g. backup, restore reportserver). In section "How to Configure the Report Server Database Connection" , I
cannot pass this step as it complains it is not a report server, please see error below:
However I can see my original reports/data srouces in below url and I can create new items like data source:
http://sydwt-ssql-1/ReportServer
http://sydwt-ssql-1/Reports/
Anyone knows what happened?
Here are the version information:
- From
Microsoft SQL Server 2012 (SP1) - 11.0.3412.0 (X64)
Mar 2 2014 01:25:09
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
- To
Microsoft SQL Server 2014 - 12.0.2480.0 (X64)
Jan 28 2015 18:53:20
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
Thanks,
Albert

Hi
As Alberto’s post, it's not supported to run a Windows Server Update Services (WSUS) database on SQL Server 2012 in Server 2008 R2. Since your application requires SQL Server 2012 Express as a minimum, you can try the following method:
1. WSUS in Server 2012 supports SQL Server 2012, if you want to upgrade WSUS database supports SQL Server 2012, you need to upgrade WSUS 3.0 SP1, operation system and so on. For more information, you can post the question about WSUS in the
Windows Server forums. It is appropriate and more experts will assist you. In addition, upgrade SQL Server 2005 to SQL Server 2012, as Shanky’s post, you need to make sure that your SQL Server 2005 has been applied Service Pack 4.
2. However, if you don’t want to upgrade WSUS database from SQL Server 2005 to SQL Server 2012, I recommend you to install a new instance of SQL Server 2012 on Windows Server 2008 R2.
In addition, before installing SQL Server 2012 or upgrading to SQL Server 2012, your system should meets the following prerequisites:
• The Windows Installer service must be running.
• Microsoft .NET Framework 3.5 SP1 and .NET Framework 4.0 are required.
• Windows PowerShell 2.0 or later is required if you're upgrading the database engine.
For more information about the prerequisites for installing SQL Server 2012, please review the following link:
Hardware and Software Requirements for Installing SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
Thanks
Lydia Zhang

When connect the Database from Toad , Sqlplus giving the error

when connect the Database from Toad , Sqlplus giving the error
recent changes 12.1.1 installatiojn
Oracle SQL plus encountered a problem and needs to close we are sorry for convenienvce
Oracle Forms Designner has encountered a probloem and needs to close we are sorry for the convenience
Thanks & Regards,
sree

when connect the Database from Toad , Sqlplus giving the error recent changes 12.1.1 installatiojnHave you tried using the same user via simple sqlplus on the database server or apps tier server itself? Please try the same database user/login on the database server using the sqlplus available on the server itself. See what message do you get. If the the login happens, then try with the tns entry e.g. sqlplus username/password@prod and see if that works on the db server. If both of these conditions work the check where is Toad picking up the tns entry from on the client pc/laptop. If first test fails, then check if the account is locked.
Hope this helps.

Upgrade the database table

hi all
I have a sceen if i will enter the value and press the save button it will add all the value into the database table.
I am doing this using dialog programming.
if anybody have face this prob to upgrade the database table than it would help me a lot
thanks a lot to all
mrutyun

Hey Hi
For that first either you have to declare internal table or you can use database table work area in the abap editor
after that you need to declare all 5 fields with same name in abap as well as screen painter.
now in the PAI of the screen you have to handle all your 3 pushbuttons with the help of fcoded assigned to them.
the case may be like this
PROCESS AFTER INPUT
CASE OK-CODE.
WHEN 'CREATE'.
ITABNAME-FNAME1 = SCREEN FIELD NAME1
ITABNAME-FNAME2 = SCREEN FIELD NAME2
ITABNAME-FNAME3 = SCREEN FIELD NAME3
ITABNAME-FNAME4 = SCREEN FIELD NAME4
ITABNAME-FNAME5 = SCREEN FIELD NAME5
INSERT <DATABASE TABLE> FROM ITAB.
WHEN 'DISPLAY'.
SELECT SINGLE * FROM DBTAB INTO ITAB.
SCREEN FIELD NAME1 = ITABNAME-FNAME1
SCREEN FIELD NAME2 = ITABNAME-FNAME2 =
SCREEN FIELD NAME3 = ITABNAME-FNAME3
SCREEN FIELD NAME4 = ITABNAME-FNAME4
SCREEN FIELD NAME5 = ITABNAME-FNAME5.
WHEN 'CHANGE'.
ITABNAME-FNAME1 = SCREEN FIELD NAME1
ITABNAME-FNAME2 = SCREEN FIELD NAME2
ITABNAME-FNAME3 = SCREEN FIELD NAME3
ITABNAME-FNAME4 = SCREEN FIELD NAME4
ITABNAME-FNAME5 = SCREEN FIELD NAME5
MODIFY <DATABASE TABLE> FROM ITAB.
ENDCASE.
THANKS

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

Similar Messages

Maybe you are looking for