Upgrading to 8.1.7.2 causes the most basic XML Usages not to work anymore
Any ideas?
I try the following and get:
declare
queryCtx DBMS_XMLquery.ctxType;
result clob;
begin
DBMS_JAVA.SET_OUTPUT (1000000);
queryCtx := DBMS_XMLQuery.newContext('select * from dual');
result := DBMS_XMLQuery.getXML(queryCtx);
DBMS_XMLQuery.closeContext(queryCtx);
exception when others then
dbms_output.put_line(substr(sqlerrm,1,255));
end;
java.lang.NullPointerException
at oracle.xml.sql.query.OracleXMLStaticQuery.getXML(OracleXMLStaticQuery.java:628)
ORA-29532: Java call terminated by uncaught Java exception: java.lang.NullPointerException
This used to work!! Any suggestions would be great. I have also made sure to run all the followup scripts against the database that are documented in the install instructions and on metalink for the additional scripts that need running.
All help is appreciated.
Thanks,
Brad
I did a manual uninstall of the XDK, and reinstalled it. Works fine now. Just have to deal with the other issue I have with nested cursors and BLOB/LONG data types.
Hope this helps someone.
Brad
Similar Messages
-
Ok, I used to be able to open links up in a new Tab using my middle mouse button. However, I updated firefox with the automatic Updates on the 26th of October and now I no longer can open links with my middle mouse button. Why? I use this feature just about every time I go searching on the internet so I really would like it back. I couldn't find anything that it was related to in the options so I turn this over to you guys.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer. Any solutions?
Hi
try this
resolve my printer problem.
with Yosemite, Apple have upgraded CUPS to 2.0, and CUPS work different. So you need to change one think in configuration.
open terminal, and write the following commands:
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
you asked for the password for superuser
sudo launchctl stop org.cups.cupsd
after this check in print queue if the printer is ready and not in pause mode.
The printer now should work, if the printer only print in B&W you need to change the configuration in CUPS web interface.
try http://localhost:631/ ; if you receive a error telling the web interface is disabled, type in terminal services the following
cupsctl WebInterface=yes
after this try again http://localhost:631/
after this choose in the web page "Adding Printers and Classes", bellow the CUPS for Administrators title.
in the new page, choose manage printers; after this choose your printer.
in the page of printer choose from the second combobox the option "set default options";
in the option page, change the color mode from monochrome to color, and save hitting the button "set default option", you be asked for a user and password with admin privileges.
After this your print is ok. -
Bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)
bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It is not safe to use a computer with software installed by a previous owner.
1a. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
1b. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
2. Partition and install OS X
If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
3. Other issues
If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
I'm trying to find an easy way to import my MP3 collection into iTunes without moving, copying or changing it.
I can't believe that iTunes doesn't have this feature, as even the most basic music players always have this.
I only use iTunes to sync my iPod, as I like Media Monkey to play my MP3s.
I have 137GB of MP3s, mainly from my ripping my CDs, LPs and downloading from Amazon. I've only purchased a handful of songs from iTunes,
Any ideas on how to do this easily?DAReese13 wrote:
I can't believe that iTunes doesn't have this feature, as even the most basic music players always have this.
It does have that feature. Why would you assume that it doesn't?
DAReese13 wrote:
I'm trying to find an easy way to import my MP3 collection into iTunes without moving, copying or changing it.
Okay, no problem.
If the top bar menu is not displayed in top left of your iTunes Library, use the CTRL+B keys to turn it on:
On that menu, use File/Add Folder to Library and navigate to the folder you wish to add:
If you wish to add just one song, notice the File/Add File to Library command on that menu as well.
Alternatively, you can drag-and-drop from the file's location into your iTunes Library.
That's all there is to it.
By the way, it is possible to have Amazon MP3s downloaded to your computer and then automatically added to the iTunes Library by the Amazon downloader. I do it all the time.
Message was edited by: the fiend -
The speaker of mu Iphone doesn't work anymore. I can only make a phonecall with my headset or on the speaker.
restore through itunes and set up as new
<Link Edited By Host> -
This is supposed to be an animated Help page. However, when Itry to click on it, it gives me the message:
Your browser does not seem to have the most updated XML parser.
Please use Microsoft Internet Explorer 5.5 or up for PointingTheWay features.
System Can Not Proceed any further.Unfortunately, it's a member-only page, with member id and password required. I'm trying to contact their IT dept., but without much luck, so far!
-
Trouble accessing the most basic JRE functions?!!!
I'm in my 1st semester for Java programming, I've just downloaded the latest SDK to Windows XP, & everything appears to be fine. (the dancing bird etc) But I cannot locate the Text Pad in order to run the most basic Java commands to test my compiler. Can anyone help me? And please explain the various possibiliies it as if I were a child, my thanks in advance.
There is not magic that you need to know to configure the path variable, it is the same for Java as it is for any windows commands, just go into your "System Properties/Advanced/Environment Variables" and set up your Path variable. javac is just an executable (EXE) program like regclean or notepad. Look in your system and make sure you have your path variable include the fully qualified path pointing to where javac and java are located.
You are also going to have to setup a system variable called "CLASSPATH" and have it point to your java library. -
my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets, my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets. it was still working just before i test the magnet case
i allready try restart and nothing and in try to connect to itunes it does not pick up my ipad what can i doHow are you resetting the device? I presume you're doing something like this?
Press and hold the Sleep/Wake button (on the top of the ipad) and Home button together for at least ten seconds until the Apple logo appears.
What happens after the device resets? Does the Apple logo appear to be replaced by the home screen? Does the iPad respond to any of the buttons or the screen at all?
tt2 -
The most basic RMAN implementation
Version:10gR2
For my test db ora652, i need to use RMAN for backup and recovery. The backup location is an NFS mount called
/dbbackup/ora652I need to use the most basic RMAN implementation. I don't want to use a repository (Client RMAN)ie. i am going to invoke the RMAN utility from Database's ORACLE_HOME to do this.
Can anyone provide me the command to configure RMAN for this?
Here are my files
--datafiles
/u02/oradata/ora652/system01.dbf
/u02/oradata/ora652/undotbs01.dbf
/u02/oradata/ora652/sysaux01.dbf
/u02/oradata/ora652/users01.dbf
/u02/oradata/ora652/shp_tbs01.dbf
--temp files
/u02/oradata/ora652/temp01.dbf
--redo logs
/u02/oradata/ora652/redo01.log
/u02/oradata/ora652/redo02.log
/u02/oradata/ora652/redo03.log
--control files
/u02/oradata/ora652/control01.ctl
/u02/oradata/ora652/control02.ctl
/u02/oradata/ora652/control03.ctlA couple of things....
1) Did you know that Oracle actually provides documentation on how to do this type of thing? You can find the Oracle Database Backup and Recovery Basics guide at:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/toc.htm
You will be amazed...they actually provide guidance on scenarios as well.
Here is the "basic" script they show for backing up a database.
RMAN> RECOVER COPY OF DATABASE WITH TAG "whole_db_copy";
# Make an incremental backup of the database to the flash recovery area.
RMAN> BACKUP INCREMENTAL LEVEL 1
FOR RECOVER OF COPY WITH TAG "whole_db_copy"
DATABASE;
Now those are the basic commands you can execute at the command line. There are other possibilities depending on your platform is a shell script with a cron job, manually as the above script shows, shell script executed manually, Oracle Enterprise Manager (which is a pretty little GUI that requires no coding on your part), 3-rd party software.
2) You better test this on a non-production system.
3) You better test the restore on a non-production system.
4) You better have plans for storing your backups offsite....hate for a fire to destroy your system and all copies of the backups...wow your boss would be mad.
5) You better read the documentation and understand RMAN in general.
Regards
Tim -
My Ipod touch 2nd generation was working fine until I tried to charge again from my PC,when I connected the Ipod was getting too hot and smelling like burn cable,the screen turn black and doesn't work anymore. any ideas about what happen?
You can try here:
iPod touch: Hardware troubleshooting
However, from your discription, I suspect that something is broken. Maybe a dead battery. In that case. I would make an appointment at the Genius Bar of an Apple store and see what they say. -
I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
After upgrading from 4.01 to 5.0 the Flashplayer and Java environment don't work.
Made an update yesterday morning 21/6 from 4.01 to 5.0. It worked except that LastPass gives an error message at login, but it still works. Later 21/6 I downloaded an update from Mozilla. After that no Flashplayer plugins like in YouTube work. Neither does Java like in http://hem.ektv.nu/~ekt000851/mane.html, that I use as a test site.
However my most precious plug in Nexus Personal works in both versions. I cant figure out what is the difference.
I run Firefox on Linux Mint LMDE 64 bit in the /home/directory/Made an update yesterday morning 21/6 from 4.01 to 5.0. It worked except that LastPass gives an error message at login, but it still works. Later 21/6 I downloaded an update from Mozilla. After that no Flashplayer plugins like in YouTube work. Neither does Java like in http://hem.ektv.nu/~ekt000851/mane.html, that I use as a test site.
However my most precious plug in Nexus Personal works in both versions. I cant figure out what is the difference.
I run Firefox on Linux Mint LMDE 64 bit in the /home/directory/ -
i don't know what else to add
I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments. -
How do i realise the most basic functionality with my zen tou
I've been playing around with my zen touch for a couple of hours now and I have to admit I'm impressed. The zen has certainly opened my eyes and challenged my previous foolish preconceptions about portable mp3 players which should be open platform, plug-and-play, straightforward and easy to use, because my experience thus far has not been any of these.
In an attempt to stop wasting any more my time I was just wondering if someone could quickly tell me how exactly do I manage the files which are already on my touch? A couple of things I would like to do:
. view and music files on my zen touch from some interface on my computer
2. copy music files from my zen touch back on to my computer
3. delete all music files without manually having to go through each and every album
Now I've probably made another crass assumption that it is infact possible to actually do this, but here's to hoping.
Now, the manual says I can use the creative mediasource organizer to transfer music to my touch. And indeed, Creative MediaSource Player/Organizer 3.30.2 claims to be able to do just this (transfer music tracks to and from your Creative portable music player using Sync Manager and SmartFit*). My question is... how? I've run the organizer, it looks like yet another music library management tool, great except for the whole part about that mp3 player stuff. Is there a hidden setting somewhere only available to stonemasons that will let me access my mp3 player?
I've also installed the Creative NOMAD Explorer (Version 3.0.0). Now, at least this works - in the same way a person in a coma can be said to li've. When I open the 'music library' I get an empty explorer window to I can click and drag mp3 files into it and it copies them over. So, I guess I have some functionality, although it would be kind of nice to have some feedback about what files I have on there.
Now as it's not april fools I'm not quite ready to accept that zen touch as the great big joke it appears to be, so if somebody could provide some insight I would really be grateful.
edit: forgot to mention, running .0.03 firmware, and the model number on the back is DAP-HD004. Upgrading to the 2. firmware is unfortunatley not an option at the moment.Message Edited by adante on 02-24-20060:7 PMMosey: thank you for the information. Just out of curiousity, was I just not paying attention and was this made known somewhere? Or do creative just expect you to potter around endlessly installing software in the hopes that you might randomly stumble across the right configuration?
Perhaps I am just crazy for assuming that if the latest firmware does not have a superseded message, it is still acti've and valid.
Anyway, I'm happy to report that the situation has been resolved mostly to my satisfaction. I was able to fob off my zen touch to some other sod, and actually make a profit from it, no less! This was quite a pleasant surprise because I usually dispose of fecal matter by flushing it down the toilet (but then, I don't have to pay for it either).
I have since purchased a noname mp3 player which, while having some pretty severe firmware, provides some great additional functionality which I have to admit I really like over the touch. Primarily, this was being able to copy mp3s to and from it* and hence use it as an mp3 player! I know this concept is a little radical, but I really think creative should look into it because it would really add some value to their current line of paperweights and doorsto
ps.
So thanks creative for that hilarious little experience. I have to admit, you guys certainly do manage to distinguish yourself from the field and push the limits of mp3 player technology. Where I used to think of a nai'vely spectrum of good to bad, I have since extended this from the good, to the bad, to the creative.
* This alone is a great feature I was never able to realise with my touch, and made even better by the fact I didn't have to install all sorts of half-baked software to achieve it!
Maybe you are looking for
-
Receiving an event with no To: email address
I'm trying to access an email that is sent to a blinded mailing list... in particular the email contains an .ics event file. When I click on the hyperlink to open the event in iCal, iCal eventually gives me an error. The error states that since the T
-
Dear sir, I bought a Nokia c6-01 in june 2011 on which I made an extended warranty of 1 year in Jan 2013 my handset got hanging prob. which I showed to Nokia care in sadar bazaar jhansi U. P. they tried to resolve the prob. but unfortunately didn't g
-
How to Find Out whether Standard IDOC is Availabl for Transaction ?
Hi, We are having SAP implementation 4.7E IS-OIL. We would like to know how to find out whether is there any Standard IDOC is Available for the SAP Transaction. Particularly for IS-Oil related transaction. e.g Load Confiramtion. T-code - O4G1.
-
Flash content flashing and crashing mac
Hello, Since the latest FF and Flash update (37 and 17) I can't watch any videos or flash content - like (annoying ad) banners. Everything literally FLASHES. Like a strobe light. Then videos get stuck, the cursor jumps/freezes, sound stutters and eve
-
Photoshop Elements 8 Crashed--HELP PLEASE
How do I fix my photoshop elemnts 8 after I received a message "PSE unexpectedly crashed". I was simply uploading pics to Shutterfly and it crashed. I'm getting no support from the Adobe help line! Thanl you Laurie C