Upgrading to WL9.2 module type issue

Hello,
I'm upgrading from Weblogic 8.1 to Weblogic 9.2.
In 8.1 I have two deployments for my application. One points to a .war file and the other points to a folder. Essentials it's just path used by the application to open files on the application server and present them to the user.
In Weblogic 9.2 the deployment setup has a new module-type tag. Does anyone know how to set the module-type tag to allow for a folder or path?
<app-deployment>
<name>foo</name>
<target>cmsserver</target>
<module-type>war</module-type>
<source-path>config\foo.war</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ava</name>
<target>cmsserver</target>
<module-type></module-type>
<source-path>\applications\DefaultWebApp\SMSA</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
Thanks in advance.

This issue has been resolved. We created a web-inf folder along with a sudo empty web.xml file in it. This was done with a war module type.

Similar Messages

HT204291 Since upgrading to iOS7, i have experienced issues with Airplay button missing

Since upgrading to iOS7, i have experienced issues with Airplay button missing from the control menu as well as in Spotify. It is as if airplay is not runing. A temp fix: Reboot of the ipad mini (Home button+standby) Is there anything permanent?
I have verified that my iPad mini and apple TV is up to date.
Airplay enabled, the network is connected with internet.
It is as if, airplay is a service that just stopped working and has to be restarted again via a reboot.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software

UWLJWF upgrade from EHP1 SPS6 to SPS8 issue, Oracle and windows 2008

Hi,
I am trying to upgrate this component UWLJWF in our production system and i get an error:
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_SUBSTITUTE >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_SUBSTITUTE >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 ora-Info: compareTo PROFILE: column length 127 larger than length 84 of target column
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE from type : VARCHAR,len : 127,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE from type : VARCHAR,len : 127,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE to type : VARCHAR,len : 84,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: KMC_WF_SUBSTITUTE modify column PROFILE to type : VARCHAR,len : 84,dec : 0,not null : true,default : | |
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Action: CONVERT
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Action: CONVERT
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Table has to be converted
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Table has to be converted
Jul 30, 2011 8:55:13 AM Info:
Jul 30, 2011 8:55:13 AM Info: E R R O R ******* (DbModificationManager)
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Error: Table KMC_WF_SUBSTITUTE: Conversion currently not possible
Jul 30, 2011 8:55:13 AM Info:
Jul 30, 2011 8:55:13 AM Info: E R R O R ******* (DbModificationManager)
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Error: Table KMC_WF_SUBSTITUTE: Conversion currently not possible
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Next archive object : KMC_WF_TEMPLATES.gdbtable
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: Next archive object : KMC_WF_TEMPLATES.gdbtable
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_TEMPLATES >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: <<< Analyze table KMC_WF_TEMPLATES >>>
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: predefined action is: >>>null<<<
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: No action required for table
Jul 30, 2011 8:55:13 AM Info: 8:55:09 2011-07-30 dbs-Info: No action required for table
We have tried to apply note 1442501 but we still get the error. We have upgrade all our landscape without any issue, of course this issue is in our production system. If you have any suggestions, that would be great.
Thanks
Jean Seguin

Hi Jean,
Did you delete the table KMC_WF_SUBSTITUTE from the database directly and retry the update?
Also try updating only the UWLJWF first after dropping the table, as suggested in the blog:
http://joeysbasisblog.blogspot.com/2011/04/jspm-error-in-upgrading-uwljwf-to-7017.html
Regards,
Srikishan

MIME type issue in version 4.1/4.2 Compatibility Mode

Problem: when displaying a PDF file, it displays OK as PDF if APEX 'Compatability Mode' = 'Pre 4.1', but displays as HTML when in either '4.1' or '4.2' mode.
Apex: 4.2.2.00.11
DB: 11gr2
Web server: Apache on Linux
More detailed description... this seems to be a MIME type issue related to APEX (or maybe DB) versioning. The following code works as expected when run in 'Pre 4.1' mode - ie. it displays an appropriate PDF document in the appropriate Acrobat/other plugin in several browsers (Firefox/Opera/Chrome/IE). But just by changing 'Compatability Mode' to '4.2' (or even '4.1'), it then downloads the file but displays it as a bunch of random characters, and the web page header MIME type is 'text/HTML'.
Note: this also happens with other file types such as xls/doc/etc, but I expect fixing PDF should also fix these.
I'm at a bit of a loss as to where this is happening, it seems there is a difference in the 'Compatibility Modes' between either the creating of the HTML header using 'OWA_UTIL.mime_header' or the component path it traverses before reaching apache.
The only other thing I could think of is that we do a bit of redirection to display the PDF, though this seems like it might be a red herring. Basically we use page 560 as a container, and then display the PDF with page 561 within a frame embeded within page 560. So, on the page 560, which is the one we reference throughout the application, we have a region with a source of '<iframe src=?p=&APP_ID.:561:&SESSION.height="500" width="700"&gt</iframe&gt</pre>'. Then on page 561, in a 'On Load - Before Header' process, we make the call to the code 'DOWNLOAD_APPLICANT_PDF' (below).
Note: I did try calling 'apex_application.stop_apex_engine' after 'DOWNLOAD_APPLICANT_PDF', as suggested in a couple threads, but it didn't fix the problem, and caused a couple low-level system errors.
Code:
<pre>
CREATE OR REPLACE PROCEDURE DOWNLOAD_APPLICANT_PDF ( p_doc_id IN   NUMBER
   AS
      v_length      NUMBER;
      lob_loc       BLOB;
      l_display_inline   CHAR := '1';
   BEGIN
      SELECT pdf_data, DBMS_LOB.getlength (pdf_data)
        INTO lob_loc, v_length
        FROM pdf_dest
       WHERE pdf_dest_id = p_doc_id;
      OWA_UTIL.mime_header ('application/pdf', FALSE);
      HTP.p ('Content-length: ' || v_length);
      HTP.p ('Content-Disposition:inline;filename="mydoc.pdf"');
      OWA_UTIL.http_header_close;
      WPG_DOCLOAD.download_file (lob_loc);
END;
</pre>

Hi,
for some background information about the above changed behavior, have a look at 4.2 Before Header Processes and Browser Security HTTP Headers of the APEX 4.1. release notes.
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

PO Condition Type Issue

Hi All,
I have encounter a PO condition type issue, hope to get someone to enlighten me.
I have create both cuztomize condition type ZOT2 AND ZOT3.
With config in Control data 1
Cond. Class - A Discount or Surcharge
Calculat. type - B Fixed Amount
Cond. category - B Delivery cost
Group Condition
Select for Group cond. & RoundDiffComp
GrpCond.routine - 1 Overall Document
ZOT2 in header condition should be divided into item via value.
ZOT3 in header condition should be divided into item via quantity.
Both condition type havemanually enter with value 300
In the test PO I have created 3 materials:-
Material     Quantity     Net Price     Item Net
A     100     1,615.00     161,500.00
B     100          16.15         1,615.00
C     1000          16.15       16,150.00
In the Item view calculation for both condition type as stated below:-
ZOT2 - 270.27 : 2.70 : 27.03 (Ratios base on Value 100:1:10)
ZOT3 - 270.27 : 2.70 : 27.03 (Rations base on Quantity 1:1:10) the amount result should be 25: 25: 250 but the result I get from the system for condition type ZOT3 is the same as ZOT2.
Please advise how to reticfy the configuration. Thank you.

Eugenia Foong Pui Mun wrote:
Hi Shiva,
>
> I have try to config with the info you have suggested, but it does not seem to get the expected result.
Hi Eugenia...
I tested scenario with values you have mentioned. It works perfect both ways. Pls follow this....
1. Pls avert the changes I had suggested in my prev reply for changing the condition types. (group condition active, round diff condition & group cond routine, keep them as they are)
2. While you enter value in header with condition type ZOT2. the value gets properly distribute by the ratio 100:1:10 and thats perfect......Now
3. While you enter the values for condition type ZOT3 in the header...Pls note that your Total Qty is 1200 and the total condition value is 300 this means per unit qty the value is 300/1200 =0.25...
Now while you enter the values for ZOT3 in the header, enter 300 in the Amount column and 1200 in the Per column, meaning that the total of 300 shoud be divided into 1200 units irrespective of quantities per Line Item
Now check the results and you will have the distribution ratio 1:1:100
NB:For ZOT3 (Qty base) to work the UoM for all the line items must be similar
Pls check and revert
Regards
Shiva
Edited by: Shivaspatil on Nov 24, 2011 12:42 PM

PS4 Party Chat NAT Type Issues

Anyone else completely irritated and annoyed by the inability to party chat because of NAT Type? This is a ridiculous error I thought they'd fix in the next patch, turns out not. I have been unable to chat with anyone because of my NAT Type. I can play online and chat online just fine but party chat doesn't work. My NAT is Type 2. I don't want to hear I need to set up a static IP and DMZ blah blah blah. That stuff is way to complicated and shouldn't be necessary if I or any PS user should want to chat in a party. I had absolutely no issues on my xbox 360 chatting in a party and I'm on the same modem and internet router as it was. I bought a PS4 to play and chat with friends and so far I haven't been able to chat with my friends at all. It's very irritating and annoying and I would like PSN to do something about it. A simple patch or anything to fix it, instead of being lazy and telling their 13 year old customers they have to set up static IP's and other ridiculous stuff. Please comment if you are having the same issues and hopefully Sony or PSN will see this and do something about it. I paid 400$ for a machine that requires me to hack into my own router in order to chat... Ridiculous.
Party Chat NAT Type Issues on PS4
This issue has been reported to the network team who are investigating the cause of the problem. As a temporary fix you can normally fix the NAT type error by on or more users leaving and re-joining the party.

I draw your attention to the last paragraph where it states a NAT Type 2 connection means its connected correctly & optimal for gaming
PS4 NAT Types:
In the network settings of the PS4, it uses 3 different NAT types to classify how the PS4 is connected to the Internet:
Type 1: The PS4 is sitting directly on the Internet with a public IP address. This setup doesn’t require NAT or inbound port forwarding and is used in scenarios where the PS4 is the only device wanting to use the Internet connection. This isn’t that common as most users share their Internet connection with other devices in their home.
Type 2: This is the most common and ideal type where the PS4 is sitting behind a RG that is performing NAT. The PS4 will have a private IP address which is translated to a private or public IP address by the RG.
Type 3: This usually implies you have a problem in the way the PS4 is accessing the Internet. This may be caused by a firewall or port restrictions. This isn’t ideal and will result in a sub-optimal gaming experience.
The difference between a Type 2 and Type 1 NAT is usually physical and can’t be changed by settings alone. If you have a Type 2 or higher NAT type then you are connected correctly and can have an optimal gaming experience.

Screen saver won't start since Lion upgrade. Two different machines, same issue.

Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
Hope this points the way to solutions for some of the rest of you!
Cheers!
Keith

[SOLVED] "No codec present that can handle the stream's type" issue

Hello. I got a python program that would play musics on a website, which doesn't work for a "no codec present that can handle the stream's type" issue. I have installed things like gstreamer, gstreamer-plugins, gstreamer-python, gstreamer-ffmpeg, and libmpeg2, etc. However, this issue still remains. Would someone here be able to help?
Here's the error message:
** Message: don't know how to handle audio/mpeg, mpegversion=(int)1, mpegaudioversion=(int)2, layer=(int)3, rate=(int)24000, channels=(int)2, parsed=(boolean)true
Error: There is no codec present that can handle the stream's type. gstplaybasebin.c(2322): prepare_output (): /GstPlayBin:player
Here's the program, written by a Chinese: https://github.com/zhendi/DoubanFM-CLI
Edit:
I'm able to play the musics on the websites via chromium.
Edit:
I tried to download the music, and use gst-launch-0.10 filesrc location=~/p535960.mp3 ! decodebin ! autovideosink, but only find these messages:
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
ERROR: from element /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstMpegAudioParse:mpegaudioparse0: GStreamer encountered a general stream error.
Additional debug info:
gstbaseparse.c(2695): gst_base_parse_loop (): /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstMpegAudioParse:mpegaudioparse0:
streaming stopped, reason not-linked
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
Last edited by lastland (2012-02-18 07:47:47)

Sorry. I just found the reason. I missed gstreamer-ugly in this case.

[svn:cairngorm3:] 15301: - Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated .

Revision: 15301
Revision: 15301
Author:   [email protected]
Date:     2010-04-09 03:30:11 -0700 (Fri, 09 Apr 2010)
Log Message:
- Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated.
- Updating the sample to show this use-case.
Modified Paths:
    cairngorm3/trunk/libraries/Module/src/com/adobe/cairngorm/module/ModuleMessageDispatcher. as
    cairngorm3/trunk/libraries/ModuleTest/src/CairngormModuleLibSample.mxml

Hello,
The error
2. How to get rid of "ORA-06512: at"FLOWS_030100.WWV_FLOW_RENDER_QUERY", line 636"?you can also find in the new features application. I wrote a post about that some days ago:
Bug in New Features Application?
Had some trouble to get the PDF print working, too. Printing works fine for standard reports, but for interactive report I am not able to get it working. Sometimes I am getting only blank pages (and no file) and sometimes I am getting PDF's which just contain an internal 500 error. Some details are in this thread: Print Interactive Reports does not work
Maybe that's related to the error of kkkannan74.
Regards, Tine.

Deploy trouble - unknown module type

Hi Folks,
I am trying to deploy an EAR file to WLS 6.1. The structure of the ear file
is:
my-ejb.jar
lib/my-java1.jar
lib/my-java2.jar
meta-inf/application.xml
.....the application.xml is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EE
Application 1.2//EN' 'http://java.sun.com/j2ee/dtds/application_1_2.dtd'>
<application>
<display-name>My App</display-name>
<module>
<ejb>my-ejb.jar</ejb>
</module>
<module>
<java>lib/my-java1.jar</java>
</module>
<module>
<java>lib/my-java2.jar</java>
</module>
</application>
.....and the manifest.mf file in my-ejb.jar is:
Manifest-Version: 1.0
Created-By: Ant 1.4.1
Class-Path: lib/my-java1.jar lib/my-java2.jar
.....BUT I'm getting this error when deploying:
Error initializing module lib/my-java1.jar of application
examples:Name=my_deploy,Type=Application from path
C:\bea\wlserver6.1\config\examples\applications\my_deploy.ear:
weblogic.management.DeploymentException: unknown module type:
weblogic.j2ee.dd.JavaModuleDescriptor>weblogic.management.DeploymentExceptio
n: unknown module type: weblogic.j2ee.dd.JavaModuleDescriptor
at
weblogic.management.mbeans.custom.Application.initializeMBeans(Application.j
ava:830)
at
weblogic.management.mbeans.custom.Application.adminLoad(Application.java:525
at weblogic.management.mbeans.custom.Application.load(Application.java:384)
Can anyone help please?!
Thanks

For some strange reason WebLogic doesn't recognize java modules and throws
this exception. Anyway, java modules are client application module, not
utility libraries - just remove them from application.xml. Class-Path: in
the EJB manifest is enough.
Roger Berlandier <[email protected]> wrote:
Hi Folks,
I am trying to deploy an EAR file to WLS 6.1. The structure of the ear file
is:
my-ejb.jar
lib/my-java1.jar
lib/my-java2.jar
meta-inf/application.xml
.....the application.xml is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EE
Application 1.2//EN' 'http://java.sun.com/j2ee/dtds/application_1_2.dtd'>
<application>
<display-name>My App</display-name>
<module>
<ejb>my-ejb.jar</ejb>
</module>
<module>
<java>lib/my-java1.jar</java>
</module>
<module>
<java>lib/my-java2.jar</java>
</module>
</application>
.....and the manifest.mf file in my-ejb.jar is:
Manifest-Version: 1.0
Created-By: Ant 1.4.1
Class-Path: lib/my-java1.jar lib/my-java2.jar
.....BUT I'm getting this error when deploying:
Error initializing module lib/my-java1.jar of application
examples:Name=my_deploy,Type=Application from path
C:\bea\wlserver6.1\config\examples\applications\my_deploy.ear:
weblogic.management.DeploymentException: unknown module type:
weblogic.j2ee.dd.JavaModuleDescriptor>weblogic.management.DeploymentExceptio
n: unknown module type: weblogic.j2ee.dd.JavaModuleDescriptor
at
weblogic.management.mbeans.custom.Application.initializeMBeans(Application.j
ava:830)
at
weblogic.management.mbeans.custom.Application.adminLoad(Application.java:525
at weblogic.management.mbeans.custom.Application.load(Application.java:384)
Can anyone help please?!
Thanks--
Dimitri

Problem upgrading and installing virtualbox-modules

Have some problems upgrading and installing virtualbox-modules
[elgringo@compjotr Desktop]$ sudo pacman -S community/virtualbox-modules
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: lirc: requires kernel26>=2.6.26-1
:: nvidia: requires kernel26>=2.6.26-1
Had to uninstall lirc nvidia and virtualbox-modules before I could upgrade the kernel and now I can't install the virtualbox-modules.
Anyone else who experienced the same problems?

virtualbox-modules depends on the kernel in core. If you want to use the kernel in testing, you'll need to rebuild the virtualbox-modules against it.
Virtualbox-modules will be fixed when kernel 2.6.26 will be moved in core. So you can wait if you prefer.

Upgradation Changes in HR Module

Hii Experts,
For our Company, we are upgrading SAP from 4.7 to ECC 6.0.
Being on the functional side i just want to know that what will be the changes or the impact of the upgradation on the HR Module including Personnel Administration, Payroll, Time Management, ESS, Training and Event Management so that it will help me after the upgradation.
Thanks,
Regards,
Nidhi Khandelwal

Upgrades can be classified as Technical & Functional
In technical, it is purely technical update and we do not enable /use new features which come with new version.
In Functional after technical upgrade, you also do necessary steps to enable the new features.
Irrespective of the upgrade, you need to do a good regression testing to ensure things worked in he past continue to work.
If you have functional upgrade, then you need to identify the features you are gonna use, then plan for spro setting / additional testing / uat / training etc.

FRM-10056: Incorrect module type stored in the file

Currently, we have been tasked with moving from windows to a red Hat Linux environment using OFM. We are currentlly using forms 11g. I have been operating totally in a windows environment and I got Linux compile code off the internet. When I try to compile the menu, I get the following:
I got the forms to compile but I cannot get the menu file to compile when I use the following:
for FILE in `ls $FORMS_PATH/*.mmb`; do
OUTPUT=${FILE/mmb/mmx}
echo "$FILE -> $OUTPUT"
frmcmp_batch.sh $FILE userid=userid/password@database Module_Type=MENU batch=yes output_file=$OUTPUT compile_all=special
done
I get the following results:
/public/server/apps2/code/test/forms/testmenu.mmb -> /public/server/apps2/code/test/forms/testmenu.mmx
Forms 11 (Form Compiler) Version 11.1.2.1.0 (Production)
Copyright (c) 1982, 2012, Oracle and/or its affiliates. All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
PL/SQL Version 11.1.0.7.0 (Production)
Oracle Procedure Builder V11.1.2.1.0 - Production
Oracle Virtual Graphics System Version 11.1.2.1.0 (Production)
Oracle Multimedia Version 11.1.2.1.0 (Production)
Oracle Tools Integration Version 11.1.2.1.0 (Production)
Oracle Tools Common Area Version 11.1.2.1.0
Oracle CORE 11.1.0.7.0 Production
FRM-10056: Incorrect module type stored in the file
Form not created
I can not seem to find any info on resolving that error. Any suggestions?

Here is the content of our frmcmp.sh script.
#!/bin/sh
# frmcmp.sh - executable Bourne shell script to run the Forms Compiler
#             (Generator) after setting up the required environment
# NOTES
# 1/ The Forms installation process should replace
#    <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
#    setting. Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
#    Please refer to the Forms documentation for details.
# Set ORACLE_HOME if not set in the calling environment:
ORACLE_HOME=/app/oracle/product/Middleware/Oracle_FRHome1
## Change this to match where your FMw product is installed.
export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$PATH
export PATH
DISPLAY=<DNS Name or IP address here and the port used.>
## For Example: Your_Domain_name.com:0.0
export DISPLAY
# Search path for Forms applications (.fmb &.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be colon
# separated (e.g. /private/dir1:/private/dir2)
# Note: the current directory is always searched by default
FORMS_PATH=<INCLUDE all directories where Forms objects are found (Lib's, Memu's, etc)>
export FORMS_PATH
# You may need to set one or more of TNS_ADMIN, TWO_TASK or ORACLE_SID
# to connect to database
TNS_ADMIN=<DIRectory where your TNSADMIN.ora files exists>
export TNS_ADMIN
ORACLE_SID=<YOUR DB SID>
export ORACLE_SID
# System settings
# You should not normally need to modify these settings.
if [ `uname -s` = 'SunOS' ]; then
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/sparcv9/server:$ORACLE_HOME/jdk/jre/lib/sparcv9/native_threads:$ORACLE_HOME/jdk/jre/lib/sparcv9:$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
elif [ `uname -s` = 'HP-UX' ] && [ `uname -m` = 'ia64' ]; then
     LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/IA64W:$ORACLE_HOME/jdk/jre/lib/IA64W/server:$LD_LIBRARY_PATH
      export LD_LIBRARY_PATH
elif [ `uname -s` = 'HP-UX' ]; then
    SHLIB_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/PA_RISC2.0W:$ORACLE_HOME/jdk/jre/lib/PA_RISC2.0W/server:$ORACLE_HOME/jdk/jre/lib/PA_RISC2.0W/native_threads:$SHLIB_PATH
      export SHLIB_PATH
elif [ `uname -s` = 'AIX' ]; then
    LIBPATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/bin:$ORACLE_HOME/jdk/jre/bin/classic:$LIBPATH
    export LIBPATH
elif [ `uname -s` = 'Linux' ] && [ `uname -m` = 'ia64' ]; then
    LD_LIBRARY_PATH=$ORACLE_HOME/jdk/jre/lib/ia64/jrockit:$ORACLE_HOME/jdk/jre/lib/ia64/native_threads:$ORACLE_HOME/jdk/jre/lib/ia64:$ORACLE_HOME/lib ; export LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
elif [ `uname -s` = 'Linux' ] && [ `uname -m` = 'x86_64' ]; then
    LD_LIBRARY_PATH=$ORACLE_HOME/jdk/jre/lib/amd64/native_threads:$ORACLE_HOME/jdk/jre/lib/amd64/server:$ORACLE_HOME/jdk/jre/lib/amd64:$ORACLE_HOME/lib ; export LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
elif [ `uname -s` = 'Linux' ]; then
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/i386/server:$ORACLE_HOME/jdk/jre/lib/i386/native_threads:$ORACLE_HOME/jdk/jre/lib/i386
    export LD_LIBRARY_PATH
    # Set LD_ASSUME_KERNEL for RedHat 3.x
    if [ -f "/etc/redhat-release" ]
    then
      RHVER=`/bin/rpm -qf /etc/redhat-release --qf "%{VERSION}\n" 2>/dev/null`
      case $RHVER in
      3*AS | 3*ES)
        export LD_ASSUME_KERNEL=2.4.19
      esac
    fi
else
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/sparc:$ORACLE_HOME/jdk/jre/lib/sparc/native_threads:$LD_LIBRARY_PATH
      export LD_LIBRARY_PATH
fi This file gets sourced in our compile.sh script that all developers use to compile their Forms Objects (.fmb, .pll, .mmb, etc).
Here is a very simplified version of our compile.sh...
#!/bin/ksh
## Source the frmcmp.sh
. /<path to file>/frmcmp.sh
frmcmp module=$filename userid=user_id/pw@databasev module_type=form compile_all=yesHope this helps.
Craig...

My iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much. This is the worst experience Apple

my iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much. This is the worst experience Apple

Settings>General>Reset>Reset all settings.
*Note:* Settings, preferences, network settings, etc *will* be reset. *NO data or media will be lost*
and/or
Settings>iCloud>Documents and Data (turn it OFF)
If you want to voice your opinion, please do so here:
http://www.apple.com/feedback/

Verify EJB after Cannot determine the Java EE module type for

Hi All,
I start verify EJB it's throw an exception
Which cases occurring this exception, how can I resolve this?
Could not verify successfully.
java.io.IOException: Cannot determine the Java EE module type for C:\Mystuff\projects\Naki\Naki-ejb\dist\Naki-ejb.jar
     at com.sun.enterprise.deployment.archivist.PluggableArchivistsHelper.getArchivistForArchive(PluggableArchivistsHelper.java:137)
     at com.sun.enterprise.deployment.archivist.PluggableArchivistsHelper.getArchivistForArchive(PluggableArchivistsHelper.java:98)
     at com.sun.enterprise.deployment.archivist.PluggableArchivistsHelper.getArchivistForArchive(PluggableArchivistsHelper.java:110)
     at com.sun.enterprise.deployment.archivist.ArchivistFactory.getArchivistForArchive(ArchivistFactory.java:93)
     at com.sun.enterprise.tools.verifier.VerificationHandler.initStandalone(VerificationHandler.java:204)
     at com.sun.enterprise.tools.verifier.VerificationHandler.<init>(VerificationHandler.java:109)
     at com.sun.enterprise.tools.verifier.Verifier.verify(Verifier.java:140)
     at com.sun.enterprise.tools.verifier.Verifier.main(Verifier.java:114)
Thanks,

I'm getting the same error although i'm not receiving those entries in the log. Can someone please respond to this post. I've tried a lot of things but can't seem to figure it out. Please email me at [email protected] if you can help.
Thanks

Upgrading to WL9.2 module type issue

Similar Messages

Maybe you are looking for