Upload an Excel file in CSV format but still error please help?
ORA-20001: Excel load run ddl error: drop table "SDF" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error:
So can anybody help me in this regard !Table or views does not exist! So what should I do in this regard ?
Thanks in advance
hi muhammad--
could you please send the following to [email protected], please:
1) the spreadsheet you were trying to upload
2) very specific information about the steps you took to get to this error (including the exact values you entered into the various fields)
also, if this occurred on htmldb.oracle.com, please do let us know.
thanks
raj
Similar Messages
-
Downloading Excel File in CSV Format
Hi All,
How can I Download a file in .CSV Format?
I am using the below shown code.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = 'C:\Documents and Settings\sandeepp3\Desktop\sample.csv'
FILETYPE = 'DAT'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ','
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
SHOW_TRANSFER_STATUS = ABAP_TRUE
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = ITAB
FIELDNAMES = HTAB
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I am getting the field separator as Tab(SPACE).
Please AdviseHi Anil,
Try this way.
REPORT ztest_notepad.
"Declarations
TYPE-POOLS :truxs.
DATA : it_download TYPE truxs_t_text_data.
DATA: BEGIN OF it_data OCCURS 0,
arbgb TYPE t100-arbgb,
msgnr TYPE t100-msgnr,
text TYPE t100-text,
END OF it_data.
START-OF-SELECTION.
"Select Data
SELECT * FROM t100
INTO CORRESPONDING FIELDS OF TABLE it_data UP TO 200 ROWS WHERE sprsl = sy-langu.
"Convert SAP to CSV format
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
i_field_seperator = ';'
TABLES
i_tab_sap_data = it_data
CHANGING
i_tab_converted_data = it_download
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc = 0.
"Download data using GUI_DOWNLOAD
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\test.txt'
filetype = 'ASC'
TABLES
data_tab = it_download.
ENDIF.
Thanks
venkat.O -
App open Excel file using CSV format
Actually I would like to find app open Excel file and add some date and save it again under CSV format
Numbers will do that (using the export function). I'm sure many other Excel compatible apps will as well, but you will need to read the app store descriptions to verify. (I can verify that Quick Office does NOT).
-
My Ipod Touch is not recognised in itunes or my computer but still charges, Please help
My Ipod Touch is not recognised in itunes or my computer but still charges when connected via USB Please help
Did plugging it into another USB port do any good? Make sure it is a USB port on the back of your PC and not via a USB hub or one on the front as they sometimes do not output enough power for the iPod to properly communicate with your PC.
Do you have another 30 pin dock connector cable around you use to try and rule out a faulty cable?
Did you try a hard reset of the device with it still connected to your PC? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
With the article above were you able to verify that the Apple Mobile Device Service was installing and running on your system?
Lastly, try plugging it into a different PC to see if it is recognized there. It can help narrow down whether it is an issue with the iPod or with your PC.
B-rock -
when i sync it comes on, however it doesnt completly sync it just says wait till applies are being changed or something like that and it can go on all night, but still nothing.
Read here for information about your issue. http://support.apple.com/kb/TS1538
-
having trouble with iphone not turning on orsomething wrong with screen have tried restoring and restting it but still nothing??
This sounds like you have tried the steps I would recommend. You said, "tried restoring and restting it but still nothing??"
1. When you are done Restoring Firmware, does iTunes show your iPhone's information. If yes then your iPhone is ON and working. Next step is to Reset, like you tried, but do it again, hold both Home and Power buttons until the iPhone restarts, usually less than 15 seconds. If still no screen, hold iPhone in bright light and look at screen, is an image there? If yes, you have a "No Backlight Problem".
2. If still no image, but you have confirmed iPhone is on with iTunes or switching Vibrate Switch and getting vibration. Then take iPhone to Apple and ask Genius to reconnect the Flex Cable #1 LCD Display Flex to the Logic Board. Before opening and during all repairs it is best if the iPhone 3GS is OFF. -
Hi How can I add an email account from Iphone? Thx
I have done what I have done in the past.. Which is go into settings..etc.. The problem is that the option to add an account isnt highlighted.. Make sense??
-
Problem in uploading an excel file in wd abap
I am trying to upload an excel file in wd abap but on uploading it shows me the data in the form of some codes but when i try to do the same thing using text file it works well.Plese refer the code .
METHOD onactionon_upload .
TYPES : BEGIN OF itab_str1,
name(10) TYPE c,
age(10) TYPE c,
END OF itab_str1.
DATA : t_table1 TYPE STANDARD TABLE OF itab_str1,
i_data TYPE STANDARD TABLE OF string,
lo_nd_sflight TYPE REF TO if_wd_context_node,
lo_el_sflight TYPE REF TO if_wd_context_element,
l_string TYPE string,
fs_table TYPE itab_str1,
l_xstring TYPE xstring,
fields TYPE string_table,
lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
data_table TYPE if_main=>elements_data_tab.
wd_context->get_attribute(
EXPORTING
name = 'DATASOURCE'
IMPORTING
value = l_xstring
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
SPLIT l_string AT cl_abap_char_utilities=>newline INTO TABLE i_data.
LOOP AT i_data INTO l_string.
SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE fields.
READ TABLE fields INTO lv_field index 1.
fs_table-name = lv_field.
READ TABLE fields INTO lv_field index 2.
fs_table-age = lv_field.
APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_sflight = wd_context->get_child_node( 'DATA_TAB').
lo_nd_sflight->bind_table( t_table1 ).
ENDMETHOD.Problem is not with the file format nor Upload element.
problem is with conversion function module, still now for conversion of xcel data to string format we dont have perfect function module.
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
That's a bug with xcel conversion As of now I dont find any fm which converts xcel data to string without any problem.
Regards
Srinvivas
Edited by: sanasrinivas on Dec 23, 2011 7:02 AM -
Need help in uploading an excel file into SAP
Hi All,
I got a requirement to upload an excel file to SAP.
But When i tried with the FM "ALSM_EXCEL_TO_INTERNAL_TABLE" , file not getting uploaded to internal table.
Getting expection 2, UPLOAD_OLE...
I think the problem is with the file... the following the sample text of the file...
Technical IdentNo. Line No. Text Location
BS-PZ-180 1 035-05 EXZENTER-SCHNECKENPUMPE 0026
BS-PZ-180 2 LIEFERANT : SOCSIL-INTER SA ECUBLENS 0026
BS-PZ-180 3 HERSTELLER : MONO PUMPS LIMITED MANCH 0026
BS-PZ-180 4 MODELL/TYP : SH 60 0026
But when I tried with only one Column..its getting successfully uploaded...
Pls suggest me how to upload the file? ( May be with sample code)
Also pls let me know hw to handle the file..which contains 5 differnt sheets of texts.. ( May be with sample code)
Your suggestion will be highly appreciated...
Thanks,
PriyaHi,
Use the FM: TEXT_CONVERT_XLS_TO_SAP. It will work perfectly. I used this function module and uploaded data from xls to sap. check the following code:
TYPE-POOLS: truxs.
PARAMETERS: p_file TYPE rlgrap-filename.
TYPES: BEGIN OF t_datatab,
PROP_NAME like SDOKPROP-PROP_NAME,
PROP_CHECK like SDOKPROP-PROP_CHECK,
TABNAME like SDOKPROP-TABNAME,
FIELDNAME like SDOKPROP-FIELDNAME,
DESCRIPT(30) type c,
END OF t_datatab.
DATA: it_datatab type standard table of t_datatab,
itab TYPE STANDARD TABLE OF t_datatab,
wa_itab TYPE t_datatab,
wa_datatab type t_datatab.
DATA: it_raw TYPE truxs_t_text_data.
At selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
*START-OF-SELECTION.
START-OF-SELECTION.
SELECT * FROM sdokprop INTO CORRESPONDING FIELDS OF TABLE itab
WHERE PROP_NAME LIKE 'DMS%'.
WRITE / 'Before Modification'.
LOOP AT itab INTO wa_itab.
WRITE:/1 wa_itab-PROP_NAME, 27 wa_itab-PROP_CHECK, 31 wa_itab-TABNAME, 65 wa_itab-FIELDNAME, 96 wa_itab-DESCRIPT.
CLEAR wa_itab.
ENDLOOP.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw " WORK TABLE
i_filename = p_file
TABLES
i_tab_converted_data = it_datatab[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
END-OF-SELECTION.
END-OF-SELECTION.
WRITE / 'After Modification'.
MODIFY sdokprop FROM TABLE it_datatab.
LOOP AT it_datatab INTO wa_datatab.
WRITE:/1 wa_datatab-PROP_NAME, 27 wa_datatab-PROP_CHECK, 31 wa_datatab-TABNAME, 65 wa_datatab-FIELDNAME, 96 wa_datatab-DESCRIPT.
CLEAR wa_datatab.
ENDLOOP.
IF sy-subrc = 0.
MESSAGE 'successfull' TYPE 'S'.
ELSE.
MESSAGE 'failed' TYPE 'E'.
ENDIF.
Regards,
Bhaskar -
Upload an excel file in the server with a background job
I am trying to upload an excel file in the server, but i only can upload flat files, i can upload files in local with the function ALSM_EXCEL_TO_INTERNAL_TABLE, can i use this function reading an excel file in the server, or is there another possibility of uploadinging an excel file in the server with a background job ?
thanks in advanceHi
First read the file from the server to some temporary place at presentation layer and then open it. And if required, save it to the server afterwards. To read/write files to application server you can use:
1. Statements "OPEN DATASET/CLOSE DATASET".
2. There are some FMs for server file operations, like "C13Z_FILE_UPLOAD_BINARY" and "C13Z_FILE_DOWNLOAD_BINARY".
*--Serdar -
Need to upload the excel file having extension .XLSX
Hello,
I am not able to upload the excel file having extension .XLSX But i can upload the excel file having extension .XLS .
Please Guide me what are the changes i need to do... for uploading the excel file".XLSX".
Thanks.Hi,
What issue you are facing? Refer this document: Upload/Read .xlsx file in SAP Web Dynpro . You need to on Netweaver 712 to use the classes mentioned in this document.
Regards,
Kiran -
How to save an excel file as CSV with semi-colon as data separator?
We are creating a flat data file to load the flat file data to our BW system with Excel. When we save the file, there are three kinds of CSV types for selecting from the "Save as type" list box:
CSV (Comma delimited)
CSV (Macintosh)
CSV (MS-DOS)
There is no CSV (semi colon delimited) type. If we pick CSV (Comma delimted) as the type, then when clicking the "Preview ..." picture icon under the "DataSource/Trans. Structure" tab of the InfoSource for this flat file (with the CSV radio button checked the Data separator default is ";"), the File Upload Preview window shows the data is messed up that some columns of the excel flat file are combined into one column.
Since the save type we picked is "CSV (Comma delimited)", then we try to change the default Data separator from ";" to "," in the preview selection screen, but still not helpful!
How to resolve the above problem?
ThanksHi Kevin,
This "," is defined in your windows setting. If you want to have ";" as separator then go to control Panel, select Regional Options, go to Numbers Tab and define the List separator as ";". After that when you will save your excel file as CSV(MS-DOS) it will have ";" as separator. This will make sure that the amounts are not broken in to two different fields while loading.
Else if you keep "," as separator then you can also go into the Excel and define all number fields as Number without thousand separator.
Let me know if you have any doubts in this.
Regards,
Rohit -
Converting flat files to csv format
hi,
Iam converting flat files to csv format..the problem is that iam running a script for inserting values.while i run this script it works fine .but while i open this csv file the datas in the excel sheet is not coming in a single line that is for a particular record its moving to second line .there is a break for a single record.so there is a problem in conversion.can anything be done in it this to avoid the breaking of lines
thanks
RatheeshYOGenereally, you shouldn't convert from a lossy format AAC or MP3) to another lossy fomrat.
It's called loss because you lose information when you convert it.
If you only use these files on the computer and the iPod, I'd recommend AAC. Better quality at same bit rate as MP3. -
Upload an Excel file into an Internal Table
Hi,
I want to upload an Excel file into an internal table but it doesn't work. I'd appreciate if someone could tell me what is wrong.
My excel file has the following format:
Col1 Col2
Row1 1 2
Row2 2 3
Row3 3 4
And the report code is the following one:
REPORT ZFI_PROKON_PROCESOS.
DATA: BEGIN OF itab OCCURS 0,
num1(1),
num2(1).
DATA: END OF itab.
PARAMETERS: p_file LIKE rlgrap-filename obligatory.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
CHANGING
file_name = p_file.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = p_file
I_BEGIN_COL = 1
I_BEGIN_ROW = 1
I_END_COL = 2
I_END_ROW = 5
TABLES
INTERN = itab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT itab.
WRITE: / itab-num1, 10 itab-num2.
ENDLOOP.
Thanks in advance,
GerardTry function module
ALSM_EXCEL_TO_INTERNAL_TABLE
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = p_path
i_begin_col = 1
i_begin_row = 2
i_end_col = 70
i_end_row = 10000
tables
intern = i_excel
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
P_PATH is file name with path.
I_EXCEL is internal table to store data.
declaration is "i_excel like structure alsmex_tabline"
then loop at i_Excel and populate your table
for eg
loop at i_excel.
case i_excel-col.
when '0001'.
i_data-compcode = i_excel-value.
when '0002'.
i_data-rcpttyp = i_excel-value.
when '0003'.
i_data-pocimpro = i_excel-value.
when '0004'.
i_data-tranno = i_excel-value.
when '0005'.
i_data-msrpo = i_excel-value.
when '0006'.
i_data-mporel = i_excel-value.
endcase.
at end of row.
append i_data.
clear i_data.
endat.
endloop. -
Upload an excel file to table data
Hi ,
I could succesfully develope an application for uploading an excel file and displaying the data in tabular format (i.e through table display ) . But on Action <<Export TO Table>> it is not showing the details in tabular format . After uploadinfg file it is providing successful msg but when i m clicking on Export to table it is not displaying table data .
Its a demo WD program in java given below
Could anybody please guide me in this approach ?
public void onActionUploadFileData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
InputStream text = null;
int temp = 0 ;
String path ;
try
File file = new File(wdContext.currentContextElement().getResource().getResourceName().toString());
FileOutputStream output = new FileOutputStream(file);
if (wdContext.currentContextElement().getResource()!= null )
text = wdContext.currentContextElement().getResource().read(false);
while ((temp=text.read())!= -1)
output.write(temp);
output.flush();
output.close();
path = file.getAbsolutePath();
wdComponentAPI.getMessageManager().reportSuccess(path);
catch (Exception ex)
ex.printStackTrace();
public void onActionExport_To_Table(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionExport_To_Table(ServerEvent)
try {
Workbook workbook = Workbook.getWorkbook(new File(path));
Sheet sheet = workbook.getSheet(0);
int columns = sheet.getColumns();
int rows = sheet.getRows();
int i=0;
int j;
for (j=1;j<=rows;j++)
element = wdContext.nodeTableData().createTableDataElement();
Cell cell1 = sheet.getCell(i,j);
element.setEmpId(cell1.getContents());
Cell cell2 = sheet.getCell(i+1,j);
element.setFirstname(cell2.getContents());
Cell cell3 = sheet.getCell(i+2,j);
element.setLastname(cell3.getContents());
wdContext.nodeTableData().addElement(element);
catch (Exception ex)
ex.printStackTrace();
Edited by: Trina_Saheli on Feb 26, 2010 4:22 PMHi Trina,
Check onAction method(onActionExporttotable) of "Export to Table ". Print the c1.getContents(), c2.getContents,c3.getContents value with MessageManager while setting vaule to node attribute.
Once the all the attribute added to node TableData, print the table attribute in onActionExporttotable method itself.
Also check the TableData node properties which is bind to table of displaying in the screen.
Hopt it helps
Regards,
Arun
Maybe you are looking for
-
How do I stop Firefox from sharing my browsing/search information with Yahoo?
I am getting targeted ads on Yahoo web pages. Firefox is supplying the data to Yahoo. I want this stopped. Is it possible or do I have to dump Firefox? Do Not Track is enabled.
-
Additional functions in ECC 6.0 compared to 4.6C
Guys, What are the additional features that we have in ECC6.0 when compared to SAP Is-Oil solution of 4.6c.
-
I have a first generation Macbook Air running Lion, and just ran software update to get the latest version of iTunes. It appears I may have gotten a firmware update mixed in the bunch, and now it keeps trying to run the update at boot, failing, and
-
Error message when adding video to premiere pro, please help!
Hi there, Every time I try and add a video to premiere pro I get an error message "There was an error decompressing audio or video." I made the video in After effects and it plays just fine but I wanted to add sound to it in premiere pro. The file is
-
Time Machine Won't Back up Completely
When I insert an external drive, Time Machine does not back up my whole computer. It only backs up around 4 GBs. Any solutions/tips on why that is the case? It is a brand new hard drive