Upload Multiple Operation using BAPI_ROUTING_CREATE

Sir,
I have to upload routing operation using this BAPI_ROUTING_CREATE. I have created a upload program for that.
I have collect the data in Task, material and Operation table. They have multiple line item against One Material.
but after executing this bapi gives this type of error.
E
Create task list: Consistency check was not successful
A
For further processing, the routing entry is missing.
So Please Guide me how to do this.
Data :
Multiple Operation have One Material.
Thanks!
Ram

Well actually that´s almost exactly what my task is as well.
So what i do is:
- reading the headdata of the given routing (the one which is to be copied)
- reading the positiondata of the given routing (the one which is to be copied)
then calling the BAPI_ROUTING_CREATE while exporting the headdata and the positiondata to the BAPI.
It works perfect for the routing itself, but the BAPI doesnt create any operations while it displays a sucess message and NO errormessages.

Similar Messages

Creating Routings Operations using BAPI_ROUTING_CREATE

Hello,
I am creating Routing operations using BAPI_ROUTING_CREATE. The parameters which I am using are:
PROFILE
TASK
MAT_ALLOC
OPERATIONS.
The group counter and group are given internal number assignment.
In my case for 1 material number plant combination only 1 task exist. This can be considered as Header record. For this Header record there are multiple operations. My program calls BAPI only When any combination of MATNR or WERKS changes in MAT_ALLOC. It works fine for 1 operation but fails incase of multiple operations. The error is routing material assignment does not exist. I have checked for all madatory parameters in FM documentation. The BAPI when executed independently works fine but in program it fails.File format is
Mat. No. Plant Key Date Status Usage Operation Number Work center Control Key Description val unit.
I am calling BAPI only when Mat no or plant changes.Unitl then I append the data in internal tables.
Passing the data in this format every operation is given Mat No and Plant, then y it is giving error routing material assignment does not exist.
Please help in this regard.
Thanks
Khushboo

Well actually that´s almost exactly what my task is as well.
So what i do is:
- reading the headdata of the given routing (the one which is to be copied)
- reading the positiondata of the given routing (the one which is to be copied)
then calling the BAPI_ROUTING_CREATE while exporting the headdata and the positiondata to the BAPI.
It works perfect for the routing itself, but the BAPI doesnt create any operations while it displays a sucess message and NO errormessages.

How to upload multiple files using af:inputfile

Hi,
I am using J dev 11.1.1.3. I have a requirement wherein i need to upload multiple files using af:inputfile. Can we do in it ADF ? Is there any other work around to implement the same. I have checked previous questions but not able to find proper solution for this.
Any pointer in this regard is highly helpful.
Regards,
Kalyan

You have to do this your self by either (as vinod said) using a different component (not present in adf) or implementing this:
1) allow the user to select multiple filenames (somehow)
2) zip them together
3) upload the zip
4) unpack the zip on the server
5) work with the files
Timo

How to upload multiple files using wicket

Hai,
how to upload multiple files using wicket at a single browse.
any suggestion?
Thanks in advance

You have to do this your self by either (as vinod said) using a different component (not present in adf) or implementing this:
1) allow the user to select multiple filenames (somehow)
2) zip them together
3) upload the zip
4) unpack the zip on the server
5) work with the files
Timo

URGENT: Is it possible to upload multiple files using STRUTS

Hi,
Is it possible to upload multiple files using STRUTS.
I am able to upload a single file. But how do i upload multiple files ??
upload.jsp
<%@ taglib uri="/WEB-INF/struts-logic.tld" prefix="logic" %>
<%@ taglib uri="/WEB-INF/struts-template.tld" prefix="template" %>
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<html:html>
<head>
<title>New Page 1</title>
</head>
<body>
<html:form action="/secure/uploadFile.do" enctype="multipart/form-data" method="POST" type="com.smartstream.webconnect.user.actions.UploadActionForm">
<p>File to upload
<html:file property="fileUpload" size="20"/></p>
<p><html:submit/></p>
</html:form>
</body>
</html:html>
UploadAction.java
public class UploadAction extends BaseAction {
    Logger log = Logger.getLogger(AttachMessageAction.class);
    public ActionForward executeAction(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws ActionException {
        System.out.println("executeAction of UploadAction");
        UploadActionForm uploadActionForm = (UploadActionForm) form;
        int fileSize = uploadActionForm.getFileUpload().getFileSize();
        System.out.println("uploadActionForm.getFileUpload().getFileSize() = " + uploadActionForm.getFileUpload().getFileSize());
        byte buffer[] = new byte[1024];
        try {
            BufferedInputStream bufferedInputStream = new BufferedInputStream(uploadActionForm.getFileUpload().getInputStream());
            FileOutputStream fos = new FileOutputStream("s:\\uploaded\\" + uploadActionForm.getFileUpload().getFileName());
            int read;
            while ( (read = bufferedInputStream.read(buffer,0,buffer.length)) != -1) {
                fos.write(buffer, 0, read);
            fos.flush();
            fos.close();
            bufferedInputStream.close();
            return mapping.findForward("success");
        } catch (IOException e) {
            e.printStackTrace();
            return mapping.findForward("error");
        }catch(OutOfMemoryError o){
            o.printStackTrace();
            System.out.println("o.getMessage() " + o.getMessage());
            return mapping.findForward("error");
UploadActionForm.java
public class UploadActionForm extends ActionForm{
    private FormFile fileUpload;
    private byte[] fileContent;
    public FormFile getFileUpload() {
        org.apache.struts.taglib.html.FormTag _jspx_th_html_form_0;
        return fileUpload;
    public byte[] getFileContent() {
        return fileContent;
    public void setFileUpload(FormFile fileUpload) {
        this.fileUpload = fileUpload;
    public void setFileContent(byte[] fileContent) {
        this.fileContent = fileContent;
}--Bhupendra Mahajan

Yes, you could try using the multipart handler...
But I have a better idea...
Determine the maximum number of file uploads that the
user can do at one time. I mean, you can't
realistically have the user upload a million files at
one time. So say the max is 20. So you create your
action form class with 20 FormFile fields called file1
to file20.
Then when you dynamically create your page, you
dynamically create the specified number of file fields
and 1 hidden field called "totalFiles" which contains
the number of file fields you created. This should be
an int field in the form bean.
Then when you do your action processing, you just loop
thru the totalFiles... Or well, actually, you may not
need that at all. You could just check all the
FormFile fields and whatever ones aren't null contain
files.But what about UploadActionForm.java[b]
How do i have exact mapping of the HTML form in this file ??
--[b]Bhupendra Mahajan

Upload multiple file using csom

how to upload multiple files programmatically using csom and store in sharepoint list
Blitz

Hi,
I have seen a similar post from you, you want to upload multiple file using csom.
You can take a look at the following thread:
http://social.msdn.microsoft.com/Forums/en-US/edd3bd86-417b-4174-9627-5a714c733256/upload-multiple-files-using-client-context-object-model?forum=sharepointdevelopment
I would suggest you to open only single thread for single issue. You can discuss your problem in the above thread only.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Problem initiating process with multiple operations using HTTP/SOAP

Hi,
I have defined a process which has multiple operations. My process starts with a pick activity containing onMessage branches for each possible operation. When I initiate this service using the BPEL console, I choose one of the operations and everything works fine.
However, when I initiate this process using an HTTP/SOAP web service call using JMeter, always the first branch is executed regardless of the message I send.
My operations are document/literal. Due to some restrictions, I cannot define a SOAPAction for the operations. Could this be the problem? Is there a workaround for this? If this is not the problem, what could be the cause?
I'm using version 10.1.2.1.
Any help will be appreciated. Thanks in advance..

hi i am using 10.1.3 and still i can not initiate a process with multiple operations. Is there anybody to tell if pick activity works fine and if there are some points to consider?
If there is a problem is there any solution to make a process with multiple operations?

Multiple operation using the same port does not work

I am trying to have multiple operations on both ports
here is my wsdl snapshot
     <portType name="CommonAlerter">
          <operation name="initiate">
               <input message="client:CommonAlerterRequestInitMessage"/>
          </operation>
          <operation name="StartWait">
               <input message="client:CommonAlerterRequestInitMessage2"/>
          </operation>
          <operation name="StopWait">
               <input message="client:CommonAlerterRequestInitMessage3"/>
          </operation>
     </portType>
     <portType name="CommonAlerterCallback">
          <operation name="onResult">
               <input message="client:CommonAlerterResponseMessage"/>
          </operation>
     </portType>
I just added two new methods "StartWait" and "StopWait" to the default async. template that got generated when I created a new BPEL Project "CommonAlerter"
Now I call this BPEL process from another BPEL project
The three methods I call "initiate", "StartWait" and finally "StopWait" are at different stages in my calling BPEL processes. Although "initiate" gets called first.
When I debug the calling process instance I get an error on the call to "StopWait" which gets called after "StartWait".
Here is the error message
Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-08010
Failed get operation definition.
Failed to get the WSDL operation definition of "StopWait" in portType "{http://xmlns.oracle.com/CommonAlerter}CommonAlerter".
Please verify that operation "StopWait" is defined in portType "{http://xmlns.oracle.com/CommonAlerter}CommonAlerter".
Now I do have this method in my WSDL
Can some one help.
My Message part XSD is
     <element name="CommonAlerterProcessInitRequest">
          <complexType>
               <sequence>
                    <element name="initializeparam" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessRequest2">
          <complexType>
               <sequence>
                    <element name="waittime" type="duration"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessRequest3">
          <complexType>
               <sequence>
                    <element name="stopargument1" type="string"/>
<element name="stopargument2" type="string"/>
               </sequence>
          </complexType>
     </element>

Here are the steps for multi operation synchronous BPEL process :
1.     Create a new BPEL process and delete request and response activities.
2.     Now add the porttype/operation in the BPEL process wsdl.
3.     Start the Process with a Pick activity and click on Create Instance checkbox. Remove the onAlarm branch as we do not need this. In the onMessage branch specify the name of the operation.
4. Now add onMessage branches to match the number of operations. The flow for each onMessage branch is different. Just make sure that you create a reply activity at the end with the correct operation chosen. So you might end up having multiple return activities.
Sometimes, a wsdl with multiple operations might not work as expected if the process version is 1.0. So try changing the process version in case you are not getting the expected results.
Hitesh

Uploading multiple documents using file upload option

Hi,
I am new to BSP in file upload.Here i am trying to upload documents and Archiving the documents.At one time i am able to uplaod one document.Is there anyway of uploading of multiple documents from the same File upload control in the same session.and keeping the documents that uploaded in the page.
Hope you will answer.Need urgent reply.
Regards
Usman

before answering your question, a request
can you reply/award points/close previous thread opened by you.
coming to your question, check out the below given link.
http://www.15seconds.com/issue/990723.htm
Regards
Raja

Database Adapter: exposing multiple operations using one PartnerLink

Hi,
I use the Database Adapter for accessing stored procedures in a package.
Using the wizard, I am able to specify a PartnerLink for one procedure in my package. However, the same package (my 'business service') contains multiple procedures I want to expose and call, preferably via the same PartnerLink.
Is this possible?
If so, what is the best strategy, e.g. use the wizard multiple times and merge the resulting wsdl files?
Thanks, Sjoerd

How do you do that?
I specifically want to Poll a table, with the wizard it doesn't give you any options to edit the query, I suppose you go into the generated files and edit the query that way?
As it happens I have actually worked around my specific issue using XSLT functions, I was actaully trying to convert DB2 JD Edwards dates using this table lookup) but once I understood how the date format is stored it was simple enough to do in XSLT.
However I'm still interested to know how this is done as I may have another requirement that requires SQL joining to the same table twice.
Regards
Stuart

Upload multiple files using lsmw

I have to upload 2 different files using lsmw..
Please explain me the procedure..
I made the option as sequential file in specified files..
but i am getting error.. Using different sequential files is not allowed...

is der some problem or just u need clarification?
When I import the data everything seems fine... 52 entries from file 1, and 682 entries from file 2.
In my "Fieldmapping and conversion rules" i have a statement like this:
read table FILE2 with key oldsls = FILE1-lgart.
My problem is that FILE2 is empty, even that I saw in my import screen that 682 entries was imported.
in one statement, you are saying ki it seems fine then u r saying that ur file 2 is empty. HOW CAN U UPLOAD DATA FROM AN EMPTY FILE ?
and we don't don anything in field mappng until unless v don't use complex stuctures while uploading data. LSMW takes care of everything by itself.
Most important thing is
reward point
hope this will help
bye tc
sandy
waiting for reward point

File format for multiple characteristics using BAPI_inspectionplan_create

Hi ,
I am trying to upload/create inspection plan through the BAPI_INSPECTIONPLAN_CREATE and would need to upload multiple operations , multiple inspection characteristics . Can someone help me in the how would be the file format structure to be used . I have multiple characteristics for a single operations.
<< Moderator message - Please do not promise points >>
Many thanks in advance.
Edited by: Rob Burbank on May 16, 2011 12:35 PM

Hi All,
Have any one used this BAPI, BAPI_INSPECTIONPLAN_CREATE to create Inspection Plan ?
Can you help me on above errors?
Thanks in advance,
Sabu

Upload Multiple files in SQL * Loader in one session

Dear all,
I want to upload multiple files using SQL*Loader in one go. In Unix its very easy as I have a quite experience of that. Could any body tell what is a way in Windows to upload multiple files in one go while using SQL * Loader. I want to run that using DOS's Batch file.
Thanks
Ghulam

In Unix its very easy like we are putting $ sign.
sqlldr userid=?????/?????
control="/u12/cad_delta.ctl",log="/u12/full_extract/$1",data="/u12/$1",bad="/u12//full_extract/$1",errors=500,silent=feedback
Suggest for Windows? It should read all .DAT files of the Windows Folder.
Thanks

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

1099 Reporting for Multiple Operating Units using same Tax Id Number

Everyone!!!!
We have multiple operating units using the same tax id number. We need to use the 1099 standard reports. I see that in the 1099 standard programs, one of the necessary parameters is Tax Entity Id which is again at operating unit level.
As 1099 reports need to be sent at the Tax Id Number not at operating unit level, is there any way to use the starndard program and do this, or will we have to customize it?
We are on 11.5.10.2 if it matters. Let me know if you need more information.

Ok, I Found it. We have to customize it. Taxes are reported at Operating Unit level only.

Upload Multiple Operation using BAPI_ROUTING_CREATE

Similar Messages

Maybe you are looking for