Problem initiating process with multiple operations using HTTP/SOAP

Hi,
I have defined a process which has multiple operations. My process starts with a pick activity containing onMessage branches for each possible operation. When I initiate this service using the BPEL console, I choose one of the operations and everything works fine.
However, when I initiate this process using an HTTP/SOAP web service call using JMeter, always the first branch is executed regardless of the message I send.
My operations are document/literal. Due to some restrictions, I cannot define a SOAPAction for the operations. Could this be the problem? Is there a workaround for this? If this is not the problem, what could be the cause?
I'm using version 10.1.2.1.
Any help will be appreciated. Thanks in advance..

hi i am using 10.1.3 and still i can not initiate a process with multiple operations. Is there anybody to tell if pick activity works fine and if there are some points to consider?
If there is a problem is there any solution to make a process with multiple operations?

Similar Messages

Problem in creating Maintenance Order with multiple operations

Hello all,
I am facing problem while creating Maintenance Order with multiple operations and sub-operations. I am using BAPI : BAPI_ALM_ORDER_MAINTAIN.
For single operation it is working fine,but i am unable to create MO with multiple operations and sub-operations.
Please, provide me the inputs required,
I have used methods :
ORDER CREATE,
OPERATION CREATE
and SAVE.
Regards,
Siddhartha

Hi,
The FM you are using is a perfect one. This FM is bit tricky to use. You need to perfectly pass the Reference number field. which links various input table parameters of this FM.
Thanks & Regards,
Navneeth K.

Multiple operation using the same port does not work

I am trying to have multiple operations on both ports
here is my wsdl snapshot
     <portType name="CommonAlerter">
          <operation name="initiate">
               <input message="client:CommonAlerterRequestInitMessage"/>
          </operation>
          <operation name="StartWait">
               <input message="client:CommonAlerterRequestInitMessage2"/>
          </operation>
          <operation name="StopWait">
               <input message="client:CommonAlerterRequestInitMessage3"/>
          </operation>
     </portType>
     <portType name="CommonAlerterCallback">
          <operation name="onResult">
               <input message="client:CommonAlerterResponseMessage"/>
          </operation>
     </portType>
I just added two new methods "StartWait" and "StopWait" to the default async. template that got generated when I created a new BPEL Project "CommonAlerter"
Now I call this BPEL process from another BPEL project
The three methods I call "initiate", "StartWait" and finally "StopWait" are at different stages in my calling BPEL processes. Although "initiate" gets called first.
When I debug the calling process instance I get an error on the call to "StopWait" which gets called after "StartWait".
Here is the error message
Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-08010
Failed get operation definition.
Failed to get the WSDL operation definition of "StopWait" in portType "{http://xmlns.oracle.com/CommonAlerter}CommonAlerter".
Please verify that operation "StopWait" is defined in portType "{http://xmlns.oracle.com/CommonAlerter}CommonAlerter".
Now I do have this method in my WSDL
Can some one help.
My Message part XSD is
     <element name="CommonAlerterProcessInitRequest">
          <complexType>
               <sequence>
                    <element name="initializeparam" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessRequest2">
          <complexType>
               <sequence>
                    <element name="waittime" type="duration"/>
               </sequence>
          </complexType>
     </element>
     <element name="CommonAlerterProcessRequest3">
          <complexType>
               <sequence>
                    <element name="stopargument1" type="string"/>
<element name="stopargument2" type="string"/>
               </sequence>
          </complexType>
     </element>

Here are the steps for multi operation synchronous BPEL process :
1.     Create a new BPEL process and delete request and response activities.
2.     Now add the porttype/operation in the BPEL process wsdl.
3.     Start the Process with a Pick activity and click on Create Instance checkbox. Remove the onAlarm branch as we do not need this. In the onMessage branch specify the name of the operation.
4. Now add onMessage branches to match the number of operations. The flow for each onMessage branch is different. Just make sure that you create a reply activity at the end with the correct operation chosen. So you might end up having multiple return activities.
Sometimes, a wsdl with multiple operations might not work as expected if the process version is 1.0. So try changing the process version in case you are not getting the expected results.
Hitesh

WebService with multiple operations [JCD as WebService]

Hi,
I am using JCAPS 5.1.1.
My requirement is, i need to create a JCD (callable as external soap Webservice) which has multiple operations.
While creating jcd user will be prompted for input,output message and operation name.
But here we can give only one operation. In this case if i want multiple operations to be performed in single JCD what i have to do.
I tried adding methods manually, to that JCD. After this i build it and deployed. When i check the generated WSDL in UDDIdocs directory
manually added methods to jcd were not present in WSDL file at all.
Only one operation name was present that too which i gave at time of creating JCD.
Hence if i want to expose JCD as webservice with multiple operations what i have to do.
Please help me.
Regards
Venkatesh.S

Hi,
I tried do the same, but I was imposible.
In this case I do a bussines process, which implement a wsdl, and the logic all was solved in a java collaboration. That is my jcd was called from bp.
So my wsdl has four operations and my java collaboration receive on the input message operation name, so my java collaboration evaluate this operation and process request.

Dynamic routing for a Business Service with multiple operations

I have two business services with multiple operations. Business service A (bsA) has operations OpA1 and OpA2. Business service B (bsB) has operations OpB1 and OpB2.
Depending on incoming Proxy message and operation, I have to do one of the following
1. If someValue = A and operation= Op1 then invoke operation opA1 of bsA
2. If someValue = B and operation= Op1 then invoke operation opB1 of bsB
3. If someValue = C and operation= Op1 then invoke operation opA1 of bsA AND* operation opB1 of bsB and return aggregate data of both invocations
1. If someValue = A and operation= Op2 then invoke operation opA2 of bsA
2. If someValue = B and operation= Op2 then invoke operation opB2 of bsB
3. If someValue = C and operation= Op2 then invoke operation opA2 of bsA AND* operation opB2 of bsB and return aggregate data of both invocations
Using a dynamic route node or dynamic routing options, I am able to achieve cases 1, 2, 4, and 5.
But for cases 3 & 6, I can not use a route node. When I use a Service call out instead, then I am forced to create a Operational branch but that does not seem like the best design since for every new operation added to the business services, I have to add a new branch to the Operational branch and redo all the functionality for that branch.
Basically, I am looking to achieve the functionality of the Route node ( no need to specify the operation ).
Any thoughts/ideas on what the best design would be?
thanks

For cases 3 & 6, why don't you route to another proxy service where you can simple do two service callouts, merge output data somehow and return them to the first proxy?
If you look for "special route feature", that could possibly call two services for a single message, I'm afraid you won't succeed.

Open Transaction MM01/MM02 with multiple views using CALL TRANSACTION

Hi All,
I want to open MM01/MM02 with multiple views using call transaction but in the parameter ID for Views (MMX) I can pass status of only one View.
SET PARAMETER ID 'MAT' FIELD v_mat.
SET PARAMETER ID 'VKO' FIELD ' '.
SET PARAMETER ID 'MTA' FIELD IT_MOFF-MTART.
SET PARAMETER ID 'MTP' FIELD IT_MOFF-MBRSH.
SET PARAMETER ID 'VTW' FIELD ' '.
SET PARAMETER ID 'BWT' FIELD ' '.
SET PARAMETER ID 'LGT' FIELD ' '.
SET PARAMETER ID 'MXX' FIELD 'K'. "Sales View
SET PARAMETER ID 'MM5' FIELD ' '.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN
Please suggest.
Regards,
Divya

I do not exactly understand what you mean, but what i already did:
- I checked that the fields are from the same type.
- KUNNR is initialized! I already had a look to the debugger, that's why i'm posting this in this forum.
any more comments on this ?
maybe i have to change anything in the z-transaction. Btw, this is what the parameter looks like in the transaction:
SELECTION-SCREEN BEGIN OF BLOCK Debitoren WITH FRAME TITLE text-001.
PARAMETERS pkunnr type kna1-kunnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK Debitoren.
Edited by: Sven Delangle on Sep 3, 2010 2:42 PM

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

File to RFC with multiple records using BPM Scenario Error...!!!

Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.

Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup

Can I communicate single PXI chassis with multiple computer using MXI

Can I communicate single PXI chassis with multiple computer using multiple MXI cards
we are using cvi with MXI we want to share channels for other computers Can we do with mxi

Yes this is possible when you use a PXI controller. Attached is a screenshot showing a possible configuration.
Jacob K || Applications Engineer || National Instruments
Attachments:
PXIMaster.png ‏20 KB

Send email with multiple attachments using MS outlook

Hi,
Is it possible to send an email with multiple attachments using MS outlook. (Using activex)
Regards,
Neha

nehrnul wrote:
Hey thanks for the reply. I'll try that way also.
but currently my requirement is to send email using MS Outlook. And I found 1 solution using invoke node
Regards,
Neha
That' "requirement" sounds like it was written by someone who is trying to drive the design of the application. Without knowing your personal situation it's hard for me to say, but if I had to guess I would say the real requirement is to send an email with multiple attachements, and the person giving that requirement thought sending it through Outlook would be the best way. You should get clairification on what the real intend of that requirement is.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

PI 7.1 multiple operation interface and SOAP action doubt

Hi guys,
I'm trying to implement a scenario, where I have a single outbound (sender side) interface with multiple operations (as 7.1 allows). The problem is afetr the WSDL generation I have the same SOAP action for each operation. Standardly there should be unique SOAP action per operation, but how to achieve it?
And another question - is it ok to use SOAP sender adapter for this interface?
Thanks for your help,
Olian

Hi Olian,
>>The problem is afetr the WSDL generation I have the same SOAP action for each operation. Standardly there should be unique SOAP action per operation, but how to achieve it?
I dont think you need to have separate action, the Operation Name inside Service Interface differentiate the Request type. Also when you send SOAP message to PI, you are sending it to either
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
(where host is the host name, port is the port number, p is the optional party name, s the service name, and c is the channel name, respectively.The URL given above is valid for 3.0/7.0/7.1.)
or * http://host:port /XISOAPAdapter/MessageServlet?senderParty=FP& senderService=FS& interface=IF&receiverParty=TP&receiverService=TS&interfaceNamespace=IFNamespace *
(7. 10 onwards a new URL syntax is also valid and is recommended to be used. )
>>And another question - is it ok to use SOAP sender adapter for this interface?
Yes
Regards
Suraj
Edited by: S.R.Suraj on Sep 8, 2009 6:23 AM

Invoking a LiveCycle process with multiple input variables using REST

Hi all,
A simple scenario brushup:
I have an LC process that takes as input 2 parameters:
- formID
- formXML
The user starts out with an empty interactive form and fills out some info in this form. In the end he/she clicks submit and now I want to invoke my process to create a flattened form from the XML just entered in the interactive form.
The process returns a flattened form with the data merged with the XDP template referenced in formID. Simple as that.
What I basically need is to do something similar to the following in a LiveCycle Designer Form:
------------------------------------Snippet from http://help.adobe.com/en_US/livecycle/10.0/ProgramLC/WS624e3cba99b79e12e69a9941333732bac8- 7fe5.html ---------------------------------------------------------------------
<html>
<body>
<form name="input" action="http://localhost:9080/rest/services/RestTest3" method="post"
enctype="multipart/form-data">
Doc: <input type="file" name="inDoc">
String 1: <input type="text" name="inListOfStrings" value="hello">
String 2: <input type="text" name="inListOfStrings" value="privet">
<input type="submit" value="Submit"/>
</form>
</body>
</html>
------------------------------------End snippet from http://help.adobe.com/en_US/livecycle/10.0/ProgramLC/WS624e3cba99b79e12e69a9941333732bac8- 7fe5.html ---------------------------------------------------------------------
Now my question to you is (hope you can help out here):
How do I invoke this process from my form using the REST endpoint - I need to specify 2 input variables for my process. One string (formID) and some xml (formXML). How is this done in Designer?
Thanks in advance
Kim Christensen
Dafolo A/S
Denmark

Bump...
Nobody who has an idea of how to do this?
Thanks in advance
Kim Christenen
Dafolo A/S
Denmark

Problem with multiple applications using one audio output

Hey there, I'm having issues setting up my 5.1 headset seen here (http://www.sharkoon.com/?q=en/content/x-tatic-digital) to work with multiple applications.
Right now I have audio streaming from a flash video, when I try run "$ speaker-test -c 6" I get the following error:
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 6 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
Playback open error: -16,Device or resource busy
If I try open another application which uses this device, the first application has its sound cut off.
2 more things to note:
- My preference for setup would be audio output through S/PDIF and input through USB, with the USB output disabled (To not waste system resources).
- I unmuted all channels in ALSA, however when I ran the test only 2 channels seemed to be working (Front L&R), it may have been defaulting to the USB connection, in which case, that explains only 2 channels being in use, is there a method of setting the S/PDIF as default system wide?
Thanks in advance for any help given!

brebs wrote:It's put the comments on multiple lines - fix that.
Woops, I guess my paste messed up, new .asoundrc: http://pastie.org/3706033
I can run both at the same time, however I cannot hear any audio. Do I somehow have to change the default device, if so how can I do that?
Edit:
Restarted system now I get:
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
Segmentation fault
(That's with both commands)
EDIT 2:
Interesting, apparently 2 audio streams are working, however the console thing still doesn't work..?
EDIT 3:
Didn't last long, now flash crashes and html 5 doesn't work -.-
EDIT 4:
Flash only works when other audio is active, however it has constant popping sound. I went through the system logs to get the errors of when flash crashes, it's audio crashing it, here's the error:
Apr 1 02:04:15 localhost kernel: [ 7057.499787] AudioThread[6227]: segfault at 7f2e2f7a8008 ip 00007f2e413a2786 sp 00007f2e33614ae8 error 7 in libasound.so.2.0.0[7f2e4131e000+eb000]
Last edited by B3NW (2012-04-01 01:11:04)

Problems with BSP application using HTTPS in EP6.0

We developed a custom BSP which uses HTTPS protocol and HTMLB tags. The BSP page has a date field (htmlb inputfield of type date..which allows the user to pick a date). If I run this BSP in its own browser window, clicking on the date field will display a calendar. However, if I run this BSP as an iView in the portal (we use EP6.0) and click on the date, I see a Javascript error message (in the browser status area) that says "access is denied" and the calendar isn't displayed.
Also, this BSP is a stateful application with the portal integration flag checked. However the DSM terminator is not invoked when I close the iView.
If I change the BSP settings to use HTTP, I can run it as a portal iView without any such problems. Has anyone experienced this and/or know how to resolve it? Any feedback would be greatly appreciated? Thanks,
Pradeep

Hi Pradeep,
You replied that you have "I fixed the date dropdown issue by specifying the theme in iView definition", could you please let us know where to specify the theme because when i ty to create the BSP iView i never get the option for specifying the theme,your assistance would be highly appreciated,do we have any Note on this issue.
Regards,
Rohit Pathak

Mapping in Services Interface with multiple operation... ?

Hi ALL,
I have a SOAP to SOAP scenario here Just PI 7.1 with EHP1 acting a bus no mapping nothing .
1) I have the WSDL file from the receiver system with multiple synchronous operations in it ..i imported the wsdl as External Definition .. i used the same the WSDL file to create the sender Service interface also...
when i created the service interface with the operation in it , i just gave the same operation name from the WSDL.this i followed for the sender and receiver service interface.
1)now the issue is do i need any operation mapping if the service interface has more than one operation ...?
2) I compelted the scenario without any operation mapping ..but i am getting this error ..Problem occurred in receiver agreement for sender -ICRM_D to receiver -EXACTTGETWEBSERVICE_D,http://ICRMtoExactTaetWebservice.com.si_os_ICRM_EXACTTETWEBSERVICE: No standard agreement found for , ICRM_D, , EXACTTARGEBSERVICE_D, http://ICRMtoExactarebservice.com, si_os_ICRM_EXACGETWEBSERVICE..?
pls help me in this issue..
Thanks
Souz

you might want to read this /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype
you will need to create additional configurations for multiple operations to be supported

Problem initiating process with multiple operations using HTTP/SOAP

Similar Messages

Maybe you are looking for