Upload ztable from DEV to SBX

I ahve a created a table in DEV . Now I want to copy this table into SBX . Is there a way I can copy this table entirely from DEV to SBX without transport. I mean can we Download and upload table from here to SBX.
Thanks

Hi Aarav
It`s not possible through a program or tcode,you have to transport it to other system.
Regards
Neha

Similar Messages

  • How to use the repository; uploading reports from DEV to PROD...

    Hello...
    I'm fairly new to CR-XIr2 (SP3) but have worked with Crystal Reports since v6.0.  I'm trying to figure out how to create a dynamic parameter list that someone can select an item from, which will get sent as an input parameter to the SQL Server 2005 stored proc that populates the report.  I'm also trying to figure out if there's an easy way to copy reports from a DEV environment into PROD.  We have BOE.
    Basically, I would like to find out resources online or in books on how to use the BOE repository for dynamic and/or cascading parameters (i.e. pulling a list of text values & their associated IDs from a lookup table that won't be used in the report), images (i.e. corporate logo), etc..  What complicates things for us is that IT is now requiring us to use a DEV environmentit was really easy when we had unlimited access in PROD!  We also need to put together a process where reports & other repository objects that are copied from DEV to PROD access the correct db, etc.  (Crystal Report in DEV accesses DEV db/repository/etc.when copied to PROD it accesses PROD db/repository/etc.)
    Anyway, I'm just looking for info on where to begin--whether it be a book, a BO/SAP knowledge base article, in-class training from a specific company, etc.  Thanks!

    Hey Markian,
    Can you let me know the process you have followed to migrate from Dev to Prod.
    We can migrate all the reports and objects and database fields through migrate wizard where you can import all the objects, reports and database fields and users to production enterprise.
    Just follow the above scenario and let us know if you are facing any error.
    Try  publish the reports using import wizard and run it in the crystal designer.
    Regards,
    Naveen.

  • Upload Ztable from other system

    Hi,
    I have two system
    ECC and BW.
    I have a ztable in BW and I want to write a program in ECC and update the table the Ztable in BW.
    do you guys know how can i do it..?
    Thanks,

    Hi,
    write an rfc in BW to update the ztable,
    Call the rfc from ECC sending your required data from ECC.

  • How to upload data from  flat to ztables with in the same client by idocs

    Hi Experts,
                   I have a requirement in IDOCS, I need to create a custom IDOC .I  am working on IDES 4.6c. The reqirement is , there  are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation  server of the same client, which will updated in ztables by using idocs.  For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
                    For this requirement how to approach (step by step) to accomplish.
    Thanks in Advance.
    Regards
    J.S.Varma

    Hi,
      This is the procedure.
    create segments using we31. <b>don't forget to relaese it</b>
    create idoc using above segments using we30 <b>don't forget to relaese it</b>
    create message type using we81
    create function module to upload data using se37
    maintain process code using we42
    create  partner profiles we20.
    In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
      Then update the database tables directly by insrt through other internal table in the same client itself.
    Thanks
    Manju

  • Upload data from excel to Ztable with statistics

    Hi,
    I have a requirement to upload data from excel sheet to ztable .
    Here i need tp provide the user with the execution statistics like
    1.Number of records read from the Excel spread-sheet
    2. Number records processed successfully
    3. Number records with Error
    4. Name and location of Error Log-file (text-file format)
    5. Name and location of the file containing error records (Excel spread-sheet format)
    I would appreciate if any of you have code written for the same

    See the below example code to upload from xl file to sap
    REPORT ZLWMI151_UPLOAD no standard page heading
                           line-size 100 line-count 60.
    *tables : zbatch_cross_ref.
    data : begin of t_text occurs 0,
           werks(4) type c,
           cmatnr(15) type c,
           srlno(12) type n,
           matnr(7) type n,
           charg(10) type n,
           end of t_text.
    data: begin of t_zbatch occurs 0,
          werks like zbatch_cross_ref-werks,
          cmatnr like zbatch_cross_ref-cmatnr,
          srlno like zbatch_cross_ref-srlno,
          matnr like zbatch_cross_ref-matnr,
          charg like zbatch_cross_ref-charg,
          end of t_zbatch.
    data : g_repid like sy-repid,
           g_line like sy-index,
           g_line1 like sy-index,
           $v_start_col         type i value '1',
           $v_start_row         type i value '2',
           $v_end_col           type i value '256',
           $v_end_row           type i value '65536',
           gd_currentrow type i.
    data: itab like alsmex_tabline occurs 0 with header line.
    data : t_final like zbatch_cross_ref occurs 0 with header line.
    selection-screen : begin of block blk with frame title text.
    parameters : p_file like rlgrap-filename obligatory.
    selection-screen : end of block blk.
    initialization.
      g_repid = sy-repid.
    at selection-screen on value-request for p_file.
      CALL FUNCTION 'F4_FILENAME'
           EXPORTING
                PROGRAM_NAME = g_repid
           IMPORTING
                FILE_NAME    = p_file.
    start-of-selection.
    Uploading the data into Internal Table
      perform upload_data.
      perform modify_table.
    top-of-page.
      CALL FUNCTION 'Z_HEADER'
      EXPORTING
        FLEX_TEXT1       =
        FLEX_TEXT2       =
        FLEX_TEXT3       =
    *&      Form  upload_data
          text
    FORM upload_data.
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
           EXPORTING
                FILENAME                = p_file
                I_BEGIN_COL             = $v_start_col
                I_BEGIN_ROW             = $v_start_row
                I_END_COL               = $v_end_col
                I_END_ROW               = $v_end_row
           TABLES
                INTERN                  = itab
           EXCEPTIONS
                INCONSISTENT_PARAMETERS = 1
                UPLOAD_OLE              = 2
                OTHERS                  = 3.
      IF SY-SUBRC <> 0.
        write:/10 'File '.
      ENDIF.
      if sy-subrc eq 0.
        read table itab index 1.
        gd_currentrow = itab-row.
        loop at itab.
          if itab-row ne gd_currentrow.
            append t_text.
            clear t_text.
            gd_currentrow = itab-row.
          endif.
          case itab-col.
            when '0001'.
              t_text-werks = itab-value.
            when '0002'.
              t_text-cmatnr = itab-value.
            when '0003'.
              t_text-srlno = itab-value.
            when '0004'.
              t_text-matnr = itab-value.
            when '0005'.
              t_text-charg = itab-value.
          endcase.
        endloop.
      endif.
      append t_text.
    ENDFORM.                    " upload_data
    *&      Form  modify_table
          Modify the table ZBATCH_CROSS_REF
    FORM modify_table.
      loop at t_text.
        t_final-werks = t_text-werks.
        t_final-cmatnr = t_text-cmatnr.
        t_final-srlno = t_text-srlno.
        t_final-matnr = t_text-matnr.
        t_final-charg = t_text-charg.
        t_final-erdat = sy-datum.
        t_final-erzet = sy-uzeit.
        t_final-ernam = sy-uname.
        t_final-rstat = 'U'.
        append t_final.
        clear t_final.
      endloop.
      delete t_final where werks = ''.
      describe table t_final lines g_line.
      sort t_final by werks cmatnr srlno.
    Deleting the Duplicate Records
      perform select_data.
      describe table t_final lines g_line1.
      modify zbatch_cross_ref from table t_final.
      if sy-subrc ne 0.
        write:/ 'Updation failed'.
      else.
        Skip 1.
        Write:/12 'Updation has been Completed Sucessfully'.
        skip 1.
        Write:/12 'Records in file ',42 g_line .
        write:/12 'Updated records in Table',42 g_line1.
      endif.
      delete from zbatch_cross_ref where werks = ''.
    ENDFORM.                    " modify_table
    *&      Form  select_data
          Deleting the duplicate records
    FORM select_data.
      select werks
             cmatnr
             srlno from zbatch_cross_ref
             into table t_zbatch for all entries in t_final
             where werks = t_final-werks
             and  cmatnr = t_final-cmatnr
             and srlno = t_final-srlno.
      sort t_zbatch by werks cmatnr srlno.
      loop at t_zbatch.
        read table t_final with key werks = t_zbatch-werks
                                    cmatnr = t_zbatch-cmatnr
                                    srlno = t_zbatch-srlno.
        if sy-subrc eq 0.
          delete table t_final .
        endif.
        clear: t_zbatch,
               t_final.
      endloop.
    ENDFORM.                    " select_data
    Reward Points if it is helpful
    Thanks
    Seshu

  • Error while uploading data to ztable from excel file

    Hi,
    I have a requirement where i have to upload data from excel file to ztable.I have used the fm 'ALSM_EXCEL_TO_INTERNAL_TABLE' for reading the excel file.After reading the excel file i have used INSERT zrb_hdr from table t_zrb_hdr for updating the ztable with data .
    here it is giving error as the data base table zrb_hdr and the internal table t_zrb_hdr should be declared of same type .
    I got this error b'coz i have changed the date and time fields in t_zrb_hdr table to char type.so the structure of zrb_hdr and t_zrb_hdr are not same.If i don't change the date and time fields,in the o/p i am not getting proper date and time formats.
    now how can i upload data into ztable?

    Hi,
    Try this.
    Data: itab type standard table of ztable,
             wa_itab type ztable.
    loop at t_zrb_hdr into wa_t_zrb_hdr.
       wa_itab-date = wa_t_zrb_hdr-date.
       wa_itab-time = wa_t_zrb_hdr-time.
       like  move all the fiedl to wa_itab...........
       append itab with wa_itab.
    Endloop.
    now insert the records from itab to the database table ztable.
    Thanks,
    Muthu.

  • Download and upload variants from PRD to DEV

    Hi,
    Unfortunately, most of the variants are being created directly in production system, but not in development. We would like to stop this process further more.
    In future, we would like to follow the process from DEV & transport to QAS and PRD.
    To match the variants of PRD and DEV, I would like to download the variants from PRD to DEV.
    How can I download the variants from one system and upload to the other system.
    Regards,
    Ravi

    Ravi,
    1. You can include the variants into a transport request in se38.
    SE38--> Variants --> Utilities --> Transport request
    2. When you create your program use can use TVARV table for variants, and parameters. You can maintain it with STVARV transaction also. So if you create your program using TVARV in your program, then you can include the changes of the variables into a transport request (there is an option to do it in transaction STVARV).
    If you use tvarv table, then you have to take care of when you saving a variant:
    http://help.sap.com/saphelp_nw04/helpdata/en/c0/9803aae58611d194cc00a0c94260a5/content.htm
    I think there is no other standard way to transport the variants from one system to another.

  • RAR 5.3- Downloading ruleset from DEV RAR and uploading to PRD RAR

    Hi ,
    I am currently looking to implement RAR version 5.3 SP9. I will have a 2 tier landscape with a DEV and PRD GRC instance. We may not have the ruleset fully customised before we build PRD GRC. So after both RAR environments are built I may need to change the ruleset in DEV and then upload the changes to PRD. Is this possible in 5.3. Can I easily download the ruleset from DEV and import to PRD as many times as I want? Or do I need to delete the PRD ruleset each time and recreate it?
    Thanks,
    Gary

    Hi Gary,
    You should be able to export and import using the utilities functionality.
    You may find it easier to delete the PRD one and upload the new one as a clean ruleset to prevent from data corruption.
    Simon

  • DB Connect Load - "Unknow error while uploading data from the DB Table"

    Hi Experts,
    We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
    I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
    At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
    Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
    Please advice.
    Thanks,
    Abhijit

    Hi,
    Sorry for bumping an old thread ....
    Did this issue get ever get resolved?
    I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
    One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
    I get "Unknown Error" whenever I trigger the data package.
    Advait

  • Error while uploading roles from quality to production

    Dear friends,
    I have to upload roles from quality to production.
    I have downloaded it from qualtiy but while uploading to production it is giving me an error "File does not contain valid data".
    Can anybody tell me what could be the problem and how to resolve it.
    Thanks in advance
    regards
    Nirgun

    HI matore,
    the best way is to transport the roles from DEV to QA and then to production as julius suggested
    are you trying for mass down load are single role
    Mass download
    go to PFCG >> utilities>> Mass download>> select all the roles which you want to move it to production
    and execute save it on desktop
    now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file which is saved in desktop and click ok
    mass generation of roles
    in the menu click on utilities>>mass generation>>give the role names with you have uploaded and click on execute select all click on genetate button
    download a single role
    go to PFCG>>in the menu click on role>>click on down load and save it on desktop
    now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file and click ok
    now you needs to manully generate the role
    do the user comparison
    hope this helps
    thanks
    kishore

  • How can i copy ztable from development server to ides server?

    how can i copy ztable from development server to ides server?

    Hello Suresh
    The simplest way is to use a transport request.
    Another possibility is to check for SAPLINK plugins which allow to download table definitions (including data elements and domains) into a flat file. Upload on IDES again via [SAPLINK|https://wiki.sdn.sap.com/wiki/display/ABAP/SAPlink].
    Regards
      Uwe

  • Transporting standard table from DEV to PROD

    Hi All,
    I have updated a table called T166K and T166P for Purchase Order Printouts.
    I have entered few values in the above mentioned tables in DEV server.
    Now, i would like to move these tables to Production, since i can not create values to these tables in Production server.
    How to move tables from DEV till PROD...??
    NOTE: While updating these tables, system didnt prompt for saving under Transport Request Numbers in DEV server. 
    Regards
    Pavan

    Hi,
    You can use scatt tool to upload the data in the developement server. Prepare a file with data. Do it in developement environment only. then in SCATT you have remote logon facility using which you can run the scatt in developement environment and the result will be placed in the production server.
    Let me know if you what more information on this.
    Pls reward points if helpful
    rgds,
    Harikrishna

  • AIA FP 11.1.1.3 - Deployment Plan Generation for migrating from Dev to Test

    Hi All,
    Can you please validate the following from a Deployment from Dev to Test perspective. We have almost completed the development for an interface using AIA 11g, and are in the process of moving the interface from one instnace to another, and any help is highly appreciated.
    Let us the take Purchase Order Integration between a legacy application and Oracle Purchasing, File Adapter-> Requester ABCS -> EBS -> Provider ABCS -> DB Adapter, which is a classical flow.
    1. The Functional person defines a project in the Project Life Cycle Workbench
    2. Functional decomposition done through Purchase Prder Business Task, and Service Solution components for each composite in the classical flow
    3. The ABCSs are created by linking the corresponding Service Solution Components from the LCW using Service Contructor. These composite.xmls will have the annotation populated by the Service Constructor. It is okay for these composites to have concrete wsdls during development phase, but the concreate ones have to be replaced with abstract ones before geenrating deployment plans.
    4. The EBS is not changed, it will have the annotations prepopulated, and there is no need to add any annoations to them
    5. The File Adapter and DB Adapters (Transport Adapters?) have to be annotated based on the developer guide
    6. The xsds and wsdl go into the mds based using the scripts provided. Any other common components can also be placed into MDS.
    7. Once the development is done, Harvest the composites using the AIA Harvester.
    8. After harvesting, from the AIA LCW, Generate the BOM. If we harvest all the 5 composites for the Business Task together, and do Generate BOM, does it capture all the composites? Or do they capture only the composites created using the Service Constructor? Or we have to add all the compistes manually to the Business Task?
    9. Add Harvested Contents by Editing the BOM -> "Search and Add Existing Composite" option. We couldnt locate the "Add Harvested Composite" option while right clicking the Business Task.
    10. Once all the harvested composites have been added to the BOM, export as XML
    11. Using the BOM, generate the DeploymentPlan. The deployment plan will have references to the xsds and wsdls in the MDS
    12. Using the Deployment Plan and AID, deploy the composites into a new instanec.
    These are the questions I have,
    1. Is the above understanding correct?
    2. Since the MDS is in the Dev database, a pre-requisite for AID seems to be deployment of xsds and wsdls into the Test MDS schema. Can you please validate?
    3. What happens to the bpels, xsls, mplans etc? How do they move from one instance to another?
    Regards,
    Anish

    Hi Anish,
    Following are the responses -
    These are the questions I have,
    1. Is the above understanding correct?
    1. The Functional person defines a project in the Project Life Cycle Workbench - Yes
    2. Functional decomposition done through Purchase Prder Business Task, and Service Solution components for each composite in the classical flow - Yes
    3. The ABCSs are created by linking the corresponding Service Solution Components from the PLWB using Service Contructor. These composite.xmls will have the annotation populated by the Service Constructor. It is okay for these composites to have concrete wsdls during development phase, but the concreate ones have to be replaced with abstract ones before geenrating deployment plans.-Yes but location attribute in binding.ws section of composite.xml should always have concrete WSDL location.Use <replaceToken> in DeploymentPlan to replace the ip and port.
    4. The EBS is not changed, it will have the annotations prepopulated, and there is no need to add any annoations to them - Yes
    5. The File Adapter and DB Adapters (Transport Adapters?) have to be annotated based on the developer guide-Yes
    6. The xsds and wsdl go into the mds based using the scripts provided. Any other common components can also be placed into MDS.- Yes
    7. Once the development is done, Harvest the composites using the AIA Harvester.-Yes
    8. After harvesting, from the AIA PLWB, Generate the BOM. If we harvest all the 5 composites for the Business Task together, and do Generate BOM, does it capture all the composites? Or do they capture only the composites created using the Service Constructor? Or we have to add all the compistes manually to the Business Task?-The 5 composites created by you should have a corresponding service solution component defined.When you define a service solution component in PLWB then a GUID is generated in the database table.You need to retrieve that value and manually enter in the annotation section of composite.xml except for ABCS.Then only the BOM will contain information on all the composites.
    9. Add Harvested Contents by Editing the BOM -> "Search and Add Existing Composite" option. We couldnt locate the "Add Harvested Composite" option while right clicking the Business Task.*-Once you harvest it will be visible.*
    10. Once all the harvested composites have been added to the BOM, export as XML - Yes
    11. Using the BOM, generate the DeploymentPlan. The deployment plan will have references to the xsds and wsdls in the MDS - Yes
    12. Using the Deployment Plan and AID, deploy the composites into a new instance.-Yes
    2. Since the MDS is in the Dev database, a pre-requisite for AID seems to be deployment of xsds and wsdls into the Test MDS schema. Can you please validate?
    Yes the 'UpdateMetaData' section under 'Configurations' in the DeploymentPlan will upload XSDs, WSDLs, DVM,Xrefs into MDS.
    3. What happens to the bpels, xsls, mplans etc? How do they move from one instance to another?
    The 'Deployments' section will deploy the project into server and write the information into MDS.
    Rgds,
    Mandrita

  • CATT upload done in dev server, want to transport to QA / PRD

    Hi Experts,
    CATT upload is created in development server.
    I want to upload data in quality for testing and finally upload in production server.
    Should I transport CATT or it can be run by using RFC.
    Please advise.
    Regards,
    Irfan

    hii ranu,
    hope there wil be no transport path maintained from prodution to development server,it has to be from dev to prod only..
    u can go to se38 and concerned program and there u wil find a icon to export program to a file on PC..
    you can refer the foll link also
    ZFORM ( sapscript) copy from production server to developer server
    regards,
    Shweta
    Edited by: Shweta Joon on Aug 23, 2009 12:58 PM

  • Download and upload ztables

    Hi sap gurus,
    I need to to copy ztables from one server to another but not through transports.
    Is there a way other than creating the tables in another server again.
    Iam talking about something like downloading and uploading again just like what we do in scripts or smartformsI
    Waiting for replies
    Have a nice weekend

    Hi Suchitra,
    Did u go through this site,
    www.dalestech.com
    Here u can find a code sample ( Direct Download Enterprise version 1.3.1 ) which downloads the database table structure, but not the data in the table. It might give some hints for ur requirement.
    Regards,
    Sachidanand.B
    Pls mark helpful answers.

Maybe you are looking for