Uploading a delimited file via sqlldr

I am using Oracle 10g on Unix. I have been receiving a file, previously fixed length, and uploading it into a table using sqlldr. This time the file is comma-delimited and the text data is enclosed with double quotes. I feel like a total idiot (and probably sound like one) but I have no idea how to make this work. Any assistance is greatly appreciated.
Thanks.

costumer wrote:
I am using Oracle 10g on Unix. I have been receiving a file, previously fixed length, and uploading it into a table using sqlldr. This time the file is comma-delimited and the text data is enclosed with double quotes. I feel like a total idiot (and probably sound like one) but I have no idea how to make this work. Any assistance is greatly appreciated.
Thanks.Go to tahiti.oracle.com
Drill down to your product and version
There you will find the complete doc set
Click on the Books tab
Find and open the Utilities Manual
Find the section on sqlldr
Find the discussion on "variable record format"
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_concepts.htm#sthref476

Similar Messages

Upload tab-delimited file from the application server to an internal table

Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.

Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
 data(4096),
 END OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
 lifnr LIKE blf00-lifnr,
 anred LIKE blfa1-anred,
 bahns LIKE blfa1-bahns,
 bbbnr LIKE blfa1-bbbnr,
 bbsnr LIKE blfa1-bbsnr,
 begru LIKE blfa1-begru,
 brsch LIKE blfa1-brsch,
 bubkz LIKE blfa1-bubkz,
 datlt LIKE blfa1-datlt,
 dtams LIKE blfa1-dtams,
 dtaws LIKE blfa1-dtaws,
 erdat LIKE lfa1-erdat,
 ernam LIKE lfa1-ernam,
 esrnr LIKE blfa1-esrnr,
 konzs LIKE blfa1-konzs,
 ktokk LIKE lfa1-ktokk,
 kunnr LIKE blfa1-kunnr,
 land1 LIKE blfa1-land1,
 lnrza LIKE blfa1-lnrza,
 loevm LIKE blfa1-loevm,
 name1 LIKE blfa1-name1,
 name2 LIKE blfa1-name2,
 name3 LIKE blfa1-name3,
 name4 LIKE blfa1-name4,
 ort01 LIKE blfa1-ort01,
 ort02 LIKE blfa1-ort02,
 pfach LIKE blfa1-pfach,
 pstl2 LIKE blfa1-pstl2,
 pstlz LIKE blfa1-pstlz,
 regio LIKE blfa1-regio,
 sortl LIKE blfa1-sortl,
 sperr LIKE blfa1-sperr,
 sperm LIKE blfa1-sperm,
 spras LIKE blfa1-spras,
 stcd1 LIKE blfa1-stcd1,
 stcd2 LIKE blfa1-stcd2,
 stkza LIKE blfa1-stkza,
 stkzu LIKE blfa1-stkzu,
 stras LIKE blfa1-stras,
 telbx LIKE blfa1-telbx,
 telf1 LIKE blfa1-telf1,
 telf2 LIKE blfa1-telf2,
 telfx LIKE blfa1-telfx,
 teltx LIKE blfa1-teltx,
 telx1 LIKE blfa1-telx1,
 xcpdk LIKE lfa1-xcpdk,
 xzemp LIKE blfa1-xzemp,
 vbund LIKE blfa1-vbund,
 fiskn LIKE blfa1-fiskn,
 stceg LIKE blfa1-stceg,
 stkzn LIKE blfa1-stkzn,
 sperq LIKE blfa1-sperq,
 adrnr LIKE lfa1-adrnr,
 mcod1 LIKE lfa1-mcod1,
 mcod2 LIKE lfa1-mcod2,
 mcod3 LIKE lfa1-mcod3,
 gbort LIKE blfa1-gbort,
 gbdat LIKE blfa1-gbdat,
 sexkz LIKE blfa1-sexkz,
 kraus LIKE blfa1-kraus,
 revdb LIKE blfa1-revdb,
 qssys LIKE blfa1-qssys,
 ktock LIKE blfa1-ktock,
 pfort LIKE blfa1-pfort,
 werks LIKE blfa1-werks,
 ltsna LIKE blfa1-ltsna,
 werkr LIKE blfa1-werkr,
 plkal LIKE lfa1-plkal,
 duefl LIKE lfa1-duefl,
 txjcd LIKE blfa1-txjcd,
 sperz LIKE lfa1-sperz,
 scacd LIKE blfa1-scacd,
 sfrgr LIKE blfa1-sfrgr,
 lzone LIKE blfa1-lzone,
 xlfza LIKE lfa1-xlfza,
 dlgrp LIKE blfa1-dlgrp,
 fityp LIKE blfa1-fityp,
 stcdt LIKE blfa1-stcdt,
 regss LIKE blfa1-regss,
 actss LIKE blfa1-actss,
 stcd3 LIKE blfa1-stcd3,
 stcd4 LIKE blfa1-stcd4,
 ipisp LIKE blfa1-ipisp,
 taxbs LIKE blfa1-taxbs,
 profs LIKE blfa1-profs,
 stgdl LIKE blfa1-stgdl,
 emnfr LIKE blfa1-emnfr,
 lfurl LIKE blfa1-lfurl,
 j_1kfrepre LIKE blfa1-j_1kfrepre,
 j_1kftbus LIKE blfa1-j_1kftbus,
 j_1kftind LIKE blfa1-j_1kftind,
 confs LIKE lfa1-confs,
 updat LIKE lfa1-updat,
 uptim LIKE lfa1-uptim,
 nodel LIKE blfa1-nodel.
DATA: END OF vendor_file_x.
FIELD-SYMBOLS: <field>,
 <field_1>.
DATA: delim TYPE x VALUE '09'.
DATA: fld_chk(4096),
 last_char,
 quote_1 TYPE i,
 quote_2 TYPE i,
 fld_lth TYPE i,
 columns TYPE i,
 field_end TYPE i,
 outp_rec TYPE i,
 extras(3) TYPE c VALUE '.,"',
 mixed_no(14) TYPE c VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
 APPEND data_tab.
ELSE.
 EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
 EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
 DO columns TIMES.
 ASSIGN space TO <field>.
 ASSIGN space TO <field_1>.
 ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
 SEARCH data_tab-data FOR delim.
 IF sy-fdpos > 0.
 field_end = sy-fdpos + 1.
 ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
 IF <field_1> CO mixed_no AND
 <field_1> CA extras.
 TRANSLATE <field_1> USING '" , '.
 CONDENSE <field_1> NO-GAPS.
 ENDIF.
* If first and last characters are '"', remove both.
 fld_chk = <field_1>.
 IF NOT fld_chk IS INITIAL.
 fld_lth = strlen( fld_chk ) - 1.
 MOVE fld_chk+fld_lth(1) TO last_char.
 IF fld_chk(1) = '"' AND
 last_char = '"'.
 MOVE space TO fld_chk+fld_lth(1).
 SHIFT fld_chk.
 MOVE fld_chk TO <field_1>.
 ENDIF. " for if fld_chk(1)=" & last_char="
 ENDIF. " for if not fld_chk is initial
* Replace "" with "
 DO.
 IF fld_chk CS '""'.
 quote_1 = sy-fdpos.
 quote_2 = sy-fdpos + 1.
 MOVE fld_chk+quote_2 TO fld_chk+quote_1.
 ELSE.
 MOVE fld_chk TO <field_1>.
 EXIT.
 ENDIF.
 ENDDO.
 <field> = <field_1>.
 ELSE.
 field_end = 1.
 ENDIF.
 SHIFT data_tab-data LEFT BY field_end PLACES.
 ENDDO.
 APPEND vendor_file_x.
 CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR data_tab.
REFRESH data_tab.
FREE data_tab.
Rob

UPLOADING tab delimited file onto FTP server

Hello all
Can i upload a tab delimited file onto the FTP server. If yes then how
points guranteed if answered!!

Hi,
Yes you can do this one .. you can have a look at the standard program 'RSEPSFTP'.
REPORT ZFTPSAP LINE-SIZE 132.
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
*-- Your SAP-UNIX FTP password (case sensitive)
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
     ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
     ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
     ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
     EXPORTING
*-- Your SAP-UNIX FTP user name (case sensitive)
       USER            = 'userid'
       PASSWORD        = MC_PASSWORD
*-- Your SAP-UNIX server host name (case sensitive)
       HOST            = 'unix-host'
       RFC_DESTINATION = 'SAPFTP'
     IMPORTING
       HANDLE          = MI_HANDLE
     EXCEPTIONS
       NOT_CONNECTED   = 1
       OTHERS          = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
     EXPORTING
       HANDLE = MI_HANDLE
       COMMAND = 'dir'
     TABLES
       DATA = MTAB_DATA
     EXCEPTIONS
       TCPIP_ERROR = 1
       COMMAND_ERROR = 2
       DATA_ERROR = 3
       OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
    WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
* do some error checking.
WRITE: / 'Error in FTP Command'.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
     EXPORTING
       HANDLE = MI_HANDLE
     EXCEPTIONS
       OTHERS = 1.
Regards
Sudheer

Detecting line-breaks within a column of an uploaded tab-delimited file.

Suppose you upload a tab-delimited file from your laptop and split each row of the file into some structure that you append to an itab.
Is there a way inside ABAP to detect that a field of the uploaded file has a CR or CRLF in it? And if so, where it is ?
Thanks in advance ...

You can use any of the following for those char.
DATA:   head_crnl(1)   TYPE c VALUE cl_abap_char_utilities=>cr_lf,
          top_crnl(1)    TYPE c VALUE cl_abap_char_utilities=>cr_lf,
          end_crnl(1)    TYPE c VALUE cl_abap_char_utilities=>cr_lf,
          blank_crnl(1) TYPE c VALUE cl_abap_char_utilities=>cr_lf,
          final_crnl(1) TYPE c VALUE cl_abap_char_utilities=>cr_lf,
          first_pgbr(1) TYPE c VALUE cl_abap_char_utilities=>form_feed.
Declare the above variables and check if they occur in the file. Hope this helps.

Upload text delimited file

could someone please provide a sample code of how to upload a text "|" delimited file into SAP internal structure? i used GUI_upload with field_separator but didn't work. many thanks.

HI Voo,
i think this is the FM you are looking for..
see the sample functionality ..
DATA: BEGIN OF itab OCCURS 0,
 vbeln LIKE vbak-vbeln,
 ernam LIKE vbak-ernam,
 END OF itab.
DATA itab2 LIKE TABLE OF KCDE_CELLS WITH HEADER LINE.
CALL FUNCTION 'KCD_CSV_FILE_TO_INTERN_CONVERT'
EXPORTING
 i_filename = 'D:dataupl.txt'
 i_separator = '|'
tables
 e_intern = itab2
* EXCEPTIONS
* UPLOAD_CSV = 1
* UPLOAD_FILETYPE = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT itab2.
SPLIT itab2-value AT '|' INTO itab-vbeln itab-ernam.
APPEND itab.
CLEAR itab.
ENDLOOP.
And the file: upl.txt
12345|text
12346|text2
12347|text3
regards
satesh

Error Encountered while uploading HTML, PDF files via WEBUI and IFS API

Hello:
We have suddenly run into problems while using IFS to upload files. We cannot seem to upload html and pdf files using either the WEBUI or Oracle's IFS API. However we are able to add .gif, jpeg files both via the WEBUI and Oracles IFS API's
This is the error we get while trying to upload .html files via the WEBUI
IFS-30002: Unable to create new Library Object.
This is the stack trace we get when we try creating content objects via IFS API's. We can't seem to understand why something that used to work has suddenly quit working.
Does this have anything to do with running out of space requirements in the table spaces?
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject oracle.ifs.common.IfsException: IFS-32251: SQL Error inserting index entry into ODMZ_CONTEXT_ROUTER java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-01410: invalid ROWID
ORA-01410: invalid ROWID
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1846)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1771)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2361)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:487)
at oracle.ifs.server.S_LibrarySession.execute(S_LibrarySession.java:14319)
at oracle.ifs.server.S_Media.insertIntoContextRouter(S_Media.java:2473)
at oracle.ifs.server.S_Media.postSetContent(S_Media.java:2440)
at oracle.ifs.server.S_Media.setContent(S_Media.java:1699)
at oracle.ifs.server.S_ContentObject.setContent(S_ContentObject.java:399)
at oracle.ifs.server.S_ContentObject.extendedPreInsert(S_ContentObject.java:236)
at oracle.ifs.server.S_LibraryObject.preInsert(S_LibraryObject.java:1644)
at oracle.ifs.server.S_LibraryObject.createInstance(S_LibraryObject.java:2711)
at oracle.ifs.server.S_LibrarySession.createSystemObjectInstance(S_LibrarySession.java:8128)
at oracle.ifs.server.S_Document.setContentObject(S_Document.java:475)
at oracle.ifs.server.S_Document.extendedPreInsert(S_Document.java:313)
at oracle.ifs.server.S_LibraryObject.preInsert(S_LibraryObject.java:1644)
at oracle.ifs.server.S_LibraryObject.createInstance(S_LibraryObject.java:2711)
at oracle.ifs.server.S_LibrarySession.newLibraryObject(S_LibrarySession.java:7922)
at oracle.ifs.server.S_LibrarySession.newPublicObject(S_LibrarySession.java:7963)
at oracle.ifs.server.S_LibrarySession.newPublicObject(S_LibrarySession.java:7945)
at oracle.ifs.server.S_LibrarySession.DMNewPublicObject(S_LibrarySession.java:7604)
at oracle.ifs.beans.LibrarySession.DMNewPublicObject(LibrarySession.java:7898)
at oracle.ifs.beans.LibrarySession.NewPublicObject(LibrarySession.java:5342)
at oracle.ifs.beans.LibrarySession.createPublicObject(LibrarySession.java:2969)
at ORG.oclc.da.utilities.ifs.IfsDocumentUtility.createDocumentDefinition(IfsDocumentUtility.java:238)
at ORG.oclc.da.utilities.ifs.IfsDocumentUtility.createHTML(IfsDocumentUtility.java:133)
at ORG.oclc.da.utilities.ifs.IfsDocumentUtility.createDocument(IfsDocumentUtility.java:89)
at ORG.oclc.da.chs.userinterface.CHSProcessListener.download(CHSProcessListener.java:1043)
at ORG.oclc.da.chs.core.Spider.download(Spider.java:605)
at ORG.oclc.da.chs.core.CHSTest_raj.main(CHSTest_raj.java:145)
Any help on this front is appreciated.
thanks
Mathangi

try this code, it works fine for me:
<%@ page import="java.io.*"%>
<%
 String name = "C:/temp/EURO_Weekly_wk01-10-26.pdf";
 try
 InputStream in = new FileInputStream(name);
 int n = 0;
 //read the file from the input stream to the byte buffer
 out.clear();
 response.setContentType("application/pdf");
 while( (n=in.read()) != -1)
 out.write (n);
 out.close();
 catch (IOException ioe) {
 out.println ("io error: " + ioe.getMessage());
 return;
%>

Uploading Very Large Files via HTTP

I am developing some classes that must upload files to a web server via HTTP and multipart/form-data. I am using Apache's Tomcat FileUpload library contained within the commons-fileupload-1.0.jar file on the server side. My code fails on large files or large quantities of small files because of the memory restriction of the VM. For example when uploading a 429 MB file I get this exception:
java.lang.OutOfMemoryError
Exception in thread "main"I have never been successful in uploading, regardless of the server-side component, more than ~30 MB.
In a production environment I cannot alter the clients VM memory setting, so I must code my client classes to handle such cases.
How can this be done in Java? This is the method that reads in a selected file and immediately writes it upon the output stream to the web resource as referenced by bufferedOutputStream:
private void write(File file) throws IOException {
byte[] buffer = new byte[bufferSize];
BufferedInputStream fileInputStream = new BufferedInputStream(new FileInputStream(file));
// read in the file
if (file.isFile()) {
 System.out.print("----- " + file.getName() + " -----");
 while (fileInputStream.available() > 0) {
 if (fileInputStream.available() >= 0 &&
 fileInputStream.available() < bufferSize) {
 buffer = new byte[fileInputStream.available()];
 fileInputStream.read(buffer, 0, buffer.length);
 bufferedOutputStream.write(buffer);
 bufferedOutputStream.flush();
 // close the files input stream
 try {
 fileInputStream.close();
 } catch (IOException ignored) {
 fileInputStream = null;
else {
 // do nothing for now
}The problem is, the entire file, and any subsequent files being read in, are all being packed onto the output stream and don't begin actually moving until close() is called. Eventually the VM gives way.
I require my client code to behave no different than the typcial web browser when uploading or downloading a file via HTTP. I know of several commercial applets that can do this, why can't I? Can someone please educate me or at least point me to a useful resource?
Thank you,
Henryiv

Are you guys suggesting that the failures I'm
experiencing in my client code is a direct result of
the web resource's (servlet) caching of my request
(files)? Because the exception that I am catching is
on the client machine and is not generated by the web
server.
trumpetinc, your last statement intrigues me. It
sounds as if you are suggesting having the client code
and the servlet code open sockets and talk directly
with one another. I don't think out customers would
like that too much.Answering your first question:
Your original post made it sound like the server is running out of memory. Is the out of memory error happening in your client code???
If so, then the code you provided is a bit confusing - you don't tell us where you are getting the bufferedOutputStream - I guess I'll just assume that it is a properly configured member variable.
OK - so now, on to what is actually causing your problem:
You are sending the stream in a very odd way. I highly suspect that your call to
buffer = new byte[fileInputStream.available()];is resulting in a massive buffer (fileInputStream.available() probably just returns the size of the file).
This is what is causing your out of memory problem.
The proper way to send a stream is as follows:
 static public void sendStream(InputStream is, OutputStream os, int bufsize)
 throws IOException {
 byte[] buf = new byte[bufsize];
 int n;
 while ((n = is.read(buf)) > 0) {
 os.write(buf, 0, n);
 static public void sendStream(InputStream is, OutputStream os)
 throws IOException {
 sendStream(is, os, 2048);
 }the simple implementation with the hard coded 2048 buffer size is fine for almost any situation.
Note that in your code, you are allocating a new buffer every time through your loop. The purpose of a buffer is to have a block of memory allocated that you then move data into and out of.
Answering your second question:
No - actually, I'm suggesting that you use an HTTPUrlConnection to connect to your servlet directly - no need for special sockets or ports, or even custom protocols.
Just emulate what your browser does, but do it in the applet instead.
There's nothing that says that you can't send a large payload to an http servlet without multi-part mime encoding it. It's just that is what browsers do when uploading a file using a standard HTML form tag.
I can't see that a customer would have anything to say on the matter at all - you are using standard ports and standard communication protocols... Unless you are not in control of the server side implementation, and they've already dictated that you will mime-encode the upload. If that is the case, and they are really supporting uploads of huge files like this, then their architect should be encouraged to think of a more efficient upload mechanism (like the one I describe) that does NOT mime encode the file contents.
- K

Upload tab delimited file

ho do i upload a file that is tab delimited, if the file is comma separated we items "split at ',' . how do i split tab separated items

HI Willard
As you know, handling of files w.r.t presentation server and application server differs.
Presentation Server: We can use FM: GUI_UPLOAD for the same.
Application Server:
1. Declare a variable of long text.
Eg: data: l_data(1024) type c.
2. Declate a variable which identifies tab character;
data: l_tab(1) type c value cl_abap_char_utilities=>horizontal_tab.
3. While reading the dataset, read into l_data.
4. Split l_data at l_tab into work area fields.
Eg:
data: l_text(1024) type c,
 l_tab(1) type c value cl_abap_char_utilites=>horizontal_tab.
open dataset fname for input in text mode encoding default.
if sy-subrc ne 0.
 write:/ 'Error Opening File'.
else.
 do.
 read dataset fname into l_text.
 if sy-subrc ne 0.
 exit.
 else.
 split l_text at l_tab into wa-fld1 wa-fld2 ....
 append wa to itab.
 endif.
 enddo.
 close dataset fname.
endif.
Hope the above info gives you some idea.
Kind Regards
Eswar

Unable to upload video files via iframe in safari version 3.0

I m not able 2 upload video files via iframe in safari 3.0.
i m facing this issue when i try 2 upload a video file via an iframe.
file gets uploaded properly if i m not using iframe to upload the same.
this issue is seen only in safari version 3.0 and not in the newer version i.e (3.2.1)
do anyone has the asnwer for this problem.....???
would be thankful to him/her...

Are you using a BT Home Hub with the IP Phone attached. This holds onto the SIP port that iChat uses. There is no way to get the router to release this port.
I had to return it all to BT as unfit for purpose and switched to Eclipse!

Parse tab delimited file after upload

I could use some advice. I have a requirement to parse and insert an uploaded, tab delimited file using APEX. Directly off of the file system, I would do this with an external table, but here I am uploading the file into a CLOB field. Does PL/SQL have any native functions to parse delimited files?
The user will not have access to the data load part of APEX, although I have seen numerous requests on this forum for that functionality to be added to the user GUI. Thoughts?

j,
I wrote this a while ago...
http://www.danielmcghan.us/2009/02/easy-csv-uploads-yes-we-can.html
I've since improved the code a little bit. If you like the solution, I could do a new post with the latest code.
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/

Problems deploying par file via Netweaver Developer Studio

Hello,
I have problems deploying a par file using the SAP Netweaver Developer Studio.
In the SNWDS i configure the following:
Window -> Preferences -> SAP Enterprise Portal
Alias: IEP
Host: khz059
Port: 52900
Login: Administrator
Description: Testportal
The logon Url of the portal is http://khz059:5290052900/irj/portal
If i try to upload a par file via "Quick PAR Upload" i get the error messages:
"Unable to connect to the portal
Operation failed: Please make sure the server 'IEP' (khz059:52900) is running or check the log (sap-plugin.log) for more detail."
Am I using the proper settings? Am I using the wrong port?
I don't know whats wrong.
Can anyone help me?
The logfile shows:
[12.09.05 / 14:53] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
java.io.IOException: Error writing to server
 at sun.net.www.protocol.http.HttpURLConnection.writeRequests(HttpURLConnection.java:302)
 at sun.net.www.protocol.http.HttpURLConnection.writeRequests(HttpURLConnection.java:314)
 at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:634)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:361)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:433)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:220)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.processUpload(SAPMPWizard.java:404)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:338)
 at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
 at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
 at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:519)
 at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
 at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
 at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
 at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
 at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
 at org.eclipse.jface.window.Window.open(Window.java:563)
 at com.sap.portal.developmentTools.general.uploader.QuickPARUploader.run(QuickPARUploader.java:146)
 at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
 at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
 at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
 at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
 at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
 at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
 at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
 at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
 at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
 at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
 at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
 at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Best regards,
Nils Kloth

Hi Nils,
I think you must have selected the defualt checkbox (Try and uncheck that). Also uncheck the checkbox for "Yes, I want to remeber the password for deployment" if it is also selected. When you deploy the par file now enter the password and try to deploy. I think this will solve your problem.
Apart from this, try this methos of deploying the Par file.
1) Save you project. Right click it and "Quick par Upload".
2) On your browser type
"http://<your_server_name>:50000/irj/servlet/prt/portal/"
Your case:
http://khz059:52900/irj/servlet/prt/portal/
or same page you can get by navigating:
System Administration-> Support-> Portal Runtime-> Administration Console.
3) At the option "Please specify a Portal Archive file (PAR) and press "upload" to store it into the PCD." Deploy your par file by giving the path.
Now you file is deployed on the server. If you want to create an Iview from this deployed .par file then :
1) On your portal. Follow the path: Content Administrator-> Portal Content -> Portal Content(sub-option). Right click -> New from par ->iView.
2) Here in the list you will find the par file which you have uploaded. Proceed as said.
3) You will finally have an iView. Right click it and preview it.
I hope this solves your problem.
Regards
Pravesh
PS: Please consider rewarding points if helpful.

Error loading xml file with sqlldr

Hi there,
I am having trouble loading an xml file via sqlldr into oracle.
The version i am running is Oracle Database 10g Release 10.2.0.1.0 - 64bit Production and the file size is 464 MB.
It ran for about 10 hours trying to load the file and then threw up the error:
ORA-22813: operand value exceeds system limits.
I have loaded a file of 170MB using the same process succesfully.
Any Ideas?
Cheers,
Dan.

Looked a bit into the issue (ORA-22813) and although it can be caused by a lot of issues varrying database versions, you could have a go at sizing up your PGA database parameter. See Oracle support Doc ID 837220.1 for more info.
The following might help
CREATE OR REPLACE PROCEDURE show_pga_memory (context_in IN VARCHAR2 DEFAULT NULL)
SELECT privileges required on:
SYS.v_$session
SYS.v_$sesstat
SYS.v_$statname
Here are the statements you should run:
GRANT SELECT ON SYS.v_$session TO <schema>;
GRANT SELECT ON SYS.v_$sesstat TO <schema>;
GRANT SELECT ON SYS.v_$statname TO <schema>;
IS
l_memory NUMBER;
BEGIN
SELECT st.VALUE
 INTO l_memory
 FROM SYS.v_$session se, SYS.v_$sesstat st, SYS.v_$statname nm
WHERE se.audsid = USERENV ('SESSIONID')
 AND st.statistic# = nm.statistic#
 AND se.SID = st.SID
 AND nm.NAME = 'session pga memory';
DBMS_OUTPUT.put_line (CASE WHEN context_in IS NULL
 THEN NULL
 ELSE context_in || ' - '
 END
 || 'PGA memory used in session = ' || TO_CHAR (l_memory));
END show_pga_memory;
/

How to upload a Flat file into sap database if the file is in Appl'n Server

Hello Sap Experts , Can you tel me
" How to upload a Flat file into sap database if the file is in Application Server.
what is Path for that ?
Plz Tel Me its Urgent
Thanks for all

Hi,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
* Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.

How do I upload a CSV file with embedded quotation marks into a table via ETL

I'm having a problem importing a CSV file via ETL that contains double-quotes, and prior solutions aren't helping. My data looks like this:
A
B114SA
CHLORASCRUB SWAB INS SUBASSEMB
A
S273SA
CHLORASCRUB MAXI INS SUBASSEMB
A
2AB286
WEB ZEE ANTISEPT 5410\4.5" CD
A
2AB512
WEB PDI PVP IODINE PREP PAD 3870/4.5
A
2AB542
WEB ZEE CLEAN WIPE NP5410/4.5
If I set the "Text Qualifier" to ' " ', then run it, it falls over on the third row, with the following error:
- Executing (Error)
Messages
Error 0xc0202055: Data Flow Task 1: The column delimiter for column "Column 2" was not found.
(SQL Server Import and Export Wizard)
Error 0xc0202092: Data Flow Task 1: An error occurred while processing file "H:\AS400_file_transfers\LIMS\ACTITEMPF.CSV" on data row 3.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - ACTITEMPF_CSV" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Any help?

Full support for embedded quotes was added in SSIS 2012.
Which version are you using?
http://blogs.msdn.com/b/mattm/archive/2011/07/17/flat-file-source-changes-in-denali.aspx

I am unable to upload files via web browser

Good morning
I have just upgraded to Mavericks (10.9.5), and I am running into a weird issue. I am unable to upload any files via the web browser. If I go to a website, and select an Upload File option, I am taken to Finder, where I am able to select the file, and press attach. The issue comes when I press upload on the website. It always either times out, or gives me an error that I was disconnected from the server. This happens on Safari, Firefox, and Chrome. I'm not sure what to do... I've repaired disk permissions and tried a lot of different security settings, but I am stumped.
Thank you

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Uploading a delimited file via sqlldr

Similar Messages

Maybe you are looking for