Uploading data from MS Access into SAP R3 v3.1

Hey Gurus,
I am wondering which options I have to import data from a MS Access database into SAP R3 version3.1. For example, can I make use of the LSM Workbench?
Regards,
Pim
points are awarded if helpfull

It is much better to take the help of technical person, as directly you can upload the data from MS Access to SAP ..the thing you have to keep in mind is tell theABAPer to convert the file into a .txt one..as then only SAP will allow.
Reward Points if it helps,
Regards,
N

Similar Messages

  • Uploading data from MS Access to SAP

    Hi all,
          How can I upload data from an Access file to my internal table?
    Regards,
    Phani.

    check out the following link
    Re: download table from ms-access
    Regards
    Raja

  • Upload data from ms access to sap r/3

    Dear Experts,
    I have a requirement to upload data from one ms access database tables to sap r/3.I have searched a lot in sdn  but i am able to find to upload data from sap r/3 to ms access.
    Please give me a solution.
    Thanks And Regards
    Ansuman

    Hi ansuman,
    i tried this for getting the result..
    [access to sap|http://www.sdn.sap.com/irj/scn/advancedsearch?query=uploadfrommsaccessto+sap#sdn_content_category_value_forums]

  • Uploading data from Excel sheet into SAP.

    Dear All,
    I want to upload data existing in Excel sheet into SAP. Is there any possibility with the following requirements?
    1) Excel file contains serial numbers with different values.Like power(230Wp),Voc,Isc,Vmp and Imp.
    2) We need to upload the same data into SAP with validations.
    3) Validations are like no serial number should be repeated.
    4) And depending on the Power value, the serial number should be assigned to different batches.Eg:The batches are as follows:
         201 - 210
         210 - 220
         220 - 230
       and if the Pmax of the serial number is 205.It should be assigned to batch 201 - 210 .
    5) At present we are using MB31 to post the serial numbers which are existing in the flat file.
    Thanks and Regards,
    Varun Siddharth

    Hi,
    Refer to the following code:
    DATA: lv_filetype(10) TYPE c,
            lv_gui_sep TYPE c,
            lv_file_name TYPE string.
      lv_filetype = 'ASC'.
      lv_gui_sep = 'X'.
      lv_file_name = pa_dfile.
    FM call to upload file
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                = lv_file_name
          filetype                = lv_filetype
          has_field_separator     = lv_gui_sep
        TABLES
          data_tab                = gi_zhralcon_file
        EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          OTHERS                  = 17.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    The excel file must be a tab delimited file.
    Hope it helps.
    Regards,
    Rajesh Kumar

  • Upload data from microsoft access to oracle form(in data block)

    Hi all,
    Any one can help me, how we can upload data from access file to developer form(in data block).
    as
    we upload data from text file to developer form(in data block) using some packages.
    Thank's in advance

    Hi Zuhair,
    If you give details of the problems you are still having then we should be able to get SQL*Developer to work.
    However, if you don't want to use SQL*Developer then the following options are taken from note 393760.1 available in Metalink if you have access to that -
    1. Use a gateway that supports the non-Oracle database or generic connectivity if a third party ODBC driver is available to do a -
    'create Oracle_table as select from non_oracle_table@database_link'
    for each table. You would then have to manually create all the other objects (views, indexes, stored procedurs etc) and permissions etc that existed in the non-Oracle database.
    2. Use the SQL*Plus COPY command to copy data from the non-Oracle database to the
    Oracle database using a gateway or generic connectivity. The syntax is as follows:
    COPY FROM username/password@oracle_sid -
    INSERT destination_oracle_table -
    USING query;
    The following example selects all rows from the EMP table in the non-Oracle database and
    inserts them into the local Oracle EMP table:
    COPY FROM SCOTT/TIGER@ora10 -
    INSERT EMP -
    USING SELECT * FROM SCOTT.EMP@gateway;
    where "gateway" is the database link created for the gateway.
    3. Load the non-Oracle data into flat files and use SQL*Loader to put the data into Oracle tables. Again manual
    work is required for the other objects.
    4. Contact the Oracle Product Technology Services (PTS) group for assistance. See the webpage -
    http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html
    5. Use a third party migration tool. See -
    http://www.oracle.com/technology/tech/migration/isv/third_party.html
    6. Use JDBC to connect to the non-Oracle database and Java in the Oracle database. This method will work but it is not suppported by the JDBC team.
    =========
    The amount of work involved will depend on the number and size of Access tables that you want to migrate.
    Regards,
    Mike

  • To upload data from Ms-SQL into R/3

    Hi Guys,
    Suppose client have two systems one is R/3 and the other is MS SQL database server, now what is the ideal way of uploading the MS SQL data into R/3. Please let me know what are all the possible ways of uploading data from MS SQL server into R/3.
    Thank you,
    Venkat.

    Hi,
    For sender JDBC adapter,
    http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    ABAP Proxies,
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    Regards,
    Bhavesh

  • Upload data from excel sheet into md61

    Hi Gurus,
                    Can anybody please tell me the solution like how to upload the data from excel sheet into the MD61
    if u suggest me to write an ABAP code then its fine or any other way would be great
    and can u also send me the abap code i would be thankful to all

    Hi,
    I can be done in 2 ways.
    1. Using LSMW you can upload your MD61 demand thru Excel sheet.
    2. You can use BDC to upload the demand from Excel. For this you need to take help from the ABAP. You need to record the macro usinf SHDB and the table maintenance will be taken care by the developer.
    For LSMW you need not depend on your developer, as a functional consultant you can do it yourself.
    Regards,
    V. Suresh

  • Upload data from legacy system to SAP through ALE IDOC

    Hello All,
    I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC.
    In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended fields to SAP. My data would be be placed in the application server.
    Can anybody tell me how to retrieve the data and update in the tables for the extended fields.
    Could you please provide a sample program for retrieving data for IDOC.
    Thanks

    Hi,
    You can find the sample code in the following link.
    Re: calling idoc_input_creditor
    Regards
    Sajid

  • Uploading data from Legacy System to SAP (In PS Module)

    While Implementing Project system Module, Whether LSMW is applicable for uploading data from Legacy sytem. If not, then what is the method used for uploading the data from Legacy sytsem to SAP

    For creating/uploading the master data from legacy system to SAP we either use below options
    1. BDC (recording)
    2. BAPI
    3. ALE iDoc.
    I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
    Problems with BAPI_PROJECT_MAINTAIN
    Regards
    Sreenivas

  • To read data from exel file into sap

    hi all,
    How to read data from exel file into the internal table in abap?
    Regards,
    sugeet.

    Hi Sugeet,
    Use the following code.
    DATA : BEGIN OF tbl_asset occurs 0,
             anlkl LIKE anla-anlkl,          " Asset Class
             bukrs LIKE anla-bukrs,          " Company Code
             ranl1 LIKE ra02s-ranl1,         " Asset #
             txt50 LIKE anla-txt50,          " Description 1
             txa50 LIKE anla-txa50,          " Description 2
             sernr LIKE anla-sernr,          " Serial #
             invnr LIKE anla-invnr,          " Inventory #
             menge LIKE anla-menge,          " Quantity
             meins LIKE anla-meins,          " Base UOM
             inken LIKE anla-inken,          " Inventory
    END OF tbl_asset.
    DATA : w_filename TYPE IBIPPARMS-path,
           w_file     TYPE string.
    start-of-selection.
    *popup for file path from user
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
       PROGRAM_NAME        = SYST-CPROG
       DYNPRO_NUMBER       = SYST-DYNNR
    IMPORTING
       FILE_NAME           = w_filename          .
    MOVE w_filename TO w_file .
    * upload data
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      =  w_file
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      TABLES
        DATA_TAB                      = tbl_asset
      EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    for HAS_FIELD_SEPARATOR Use
    'X': Fields are separated by tabs.
    SPACE: Fields are not separated by tabs. In this case, the table must contain only one column or all columns must be contained in the file in their entire length.
    Hope it helps...
    Lokesh
    Pls. reward appropriate points

  • Problem pulling data from Microsoft Access into Excel

    Using Office 2010 pro, Windows 7:
    I'm trying to pull in data from a password protected Access Database into Excel but I am having all kinds of problems..
    In Excel im using:-
    Data Link Properties> "Provider"> MS Office 12.0 Access database Engine OLE DB Provider
    "Data Source": the full path and filename to the access database
    "Enter information to log onto your server" - "use NT integrated security" is greyed out so I select username "Admin" and password <the database password>.
    When clicking on "Test connection" I get the following error message:
    "The test connection failed because of an error in initializing provider. Cannot start your application. The workgroup information file is missing or opened exclusively by another user."
    Any help would be very much appreciated!
    With thanks, NECoder

    a similar issue:
    http://social.technet.microsoft.com/Forums/en-us/5779d18b-a41e-416e-9001-8bbc73670591/test-connection-failed-because-of-an-error-initializing-provider?forum=sqldataaccess

  • Importing data from MS-Access into Oracle 9i

    I want to import data from access into oracle 9i. I already contain the same data in Oracle but these Access files contain updates and additional data to the existing data . So i need help to import in such a way that origional data remain same just addional data and updates come from MS-Access.

    Hi,
    You can achieve this by using the SQL Loader, which will help you out to load the data.
    For further reference check the below link
    http://lbd.epfl.ch/f/teaching/courses/oracle8i/server.815/a67792/ch05.htm#1261
    As you said that you have existing data in the table and you have Update's too. you have the Options like
    APPEND which you will useful to add the new records.
    - Pavan Kumar N

  • Upload data from flat file into internal table

    Hi friends,
    I want to upload the data from a flat file into internal table , but the problem is that all the columns in that flat file are seperated by "|" character instead of tabs.
    Plz help me out.........

    HEllo,
    DO like this.
      CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
      FILENAME = LV_FILENAME
      FILETYPE = 'ASC'
      HAS_FIELD_SEPARATOR = 'X'  " Check here
    * HEADER_LENGTH = '1'
    * READ_BY_LINE = 'X'
    * DAT_MODE = ' '
    * CODEPAGE = ' '
    * IGNORE_CERR = ABAP_TRUE
    * REPLACEMENT = '#'
    * CHECK_BOM = ' '
    * IMPORTING
    * FILELENGTH =
    * HEADER =
      TABLES
      DATA_TAB = IT_COJRNL
      EXCEPTIONS
      FILE_OPEN_ERROR = 1
      FILE_READ_ERROR = 2
      NO_BATCH = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE = 5
      NO_AUTHORITY = 6
      UNKNOWN_ERROR = 7
      BAD_DATA_FORMAT = 8
      HEADER_NOT_ALLOWED = 9
      SEPARATOR_NOT_ALLOWED = 10
      HEADER_TOO_LONG = 11
      UNKNOWN_DP_ERROR = 12
      ACCESS_DENIED = 13
      DP_OUT_OF_MEMORY = 14
      DISK_FULL = 15
      DP_TIMEOUT = 16
      OTHERS = 17
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    VAsanth

  • Unable to Upload data from text file into BEx Analyzer selection screen

    Hi,
    No response from BEx Analyzer when I am trying to upload around 40,000 material from text file into BEx Analyzer selection screen using "Upload selections" options. But I am able to upload only 10,000 material from text file.  I never faced same kind of issue when I am using BEx Analyzer 3.x.  Please let me know I have to change any settings related to BEx or any other.
    Thanks
    Sri Krishna Ponnada.

    Hello
    It seems you are reaching the .NET memory limitation informed in note 1040454.
    Because 3.5 does not use .NET it can work that.
    Regards,
    Ricardo

  • Scheduling Problem for uploading Data from Flat file to SAP

    Hi guys,
    I am facing a weared problem in uploading some leave records in z table. The code is working fine if we run it through se38 after selecting the file from a shared location from production server which has all the access rights.
    This folder lies in the \usr folder of SAP Production.
    I have kept all the Flat files in the shared path "
    Tis-mum-iz-s1\migration\SAP-INT\leave\" ...
    To give u exact directory structure..
    Tis-mum-iz-s1 is the Server Name
    usr is the SAP System folder used for uploads and downloads
    usr |
    ...-> Migration |
                      -> SAP-INT |
                                 -> leave -> (Flat Files)
    Migration folder is shared with all rights.
    Obviously, we cannot give shared drive as the variant in the scheduler.
    So i use the system path i.e. \usr\sap\tmp\migration\sap-int\leave\ as the variant.
    All my other download programs are working fine with this path as a variant...
    But my this particular upload program does not work with this path....
    I am giving u my code...
    TATA INTERACTIVE SYSTEMS (A Division of TATA INDUSTRIES LIMITED)
    REPORT      :  ZMIGRATE_ZLEAVE
    DESCRIPTION :  To Upload the Leave data. (ZLEAVE)
    CREATED BY  :  Abhishek Bachhawat
    CREATED ON  :  01.09.2005
    CONSULTANT  :  ANAND
    REPORT  ZMIGRATE_ZLEAVE.
    TABLES: ZLEAVE.
    data: begin of wtab,
              MANDT(3),
              ZLVID(8),
              PERNR(8),
              ZSTDT(8),
              ZENDT(8),
              ZDAYS(4),
              AEDAT(8),
              ERDAT(8),
          end of wtab,
          itab like WTAB occurs 0 WITH HEADER LINE.
    data: temp like zleave occurs 0 WITH HEADER LINE.
    SELECTION-SCREEN BEGIN OF BLOCK file
                   WITH FRAME TITLE text-005.
    parameters: file like rlgrap-filename Obligatory.
    Concatenate File SY-DATUM '_Leave.txt' into File.
    SELECTION-SCREEN END OF BLOCK file.
    at SELECTION-SCREEN ON VALUE-REQUEST FOR file .
      CALL FUNCTION 'WS_FILENAME_GET'
        IMPORTING
          FILENAME = file.
      IF SY-SUBRC <> 0.
      ENDIF.
    start-of-selection.
      if file ne space.
        CALL FUNCTION 'WS_UPLOAD'
          EXPORTING
            FILENAME = FILE
            FILETYPE = 'DAT'
          TABLES
            DATA_TAB = ITAB.
      else.
        message e000(zps) with 'Specify a file'.
      endif.
      SORT ITAB BY ZLVID.
      LOOP AT ITAB.
        REFRESH TEMP.
        CLEAR TEMP.
        TEMP-MANDT = sy-mandt.
        TEMP-ERDAT = SY-DATUM.
        TEMP-ZLVID = ITAB-ZLVID.
        TEMP-PERNR = ITAB-PERNR.
        TEMP-ZSTDT = ITAB-ZSTDT.
        TEMP-ZENDT = ITAB-ZENDT.
        TEMP-ZDAYS = ITAB-ZDAYS.
        TEMP-AEDAT = ITAB-AEDAT.
        TEMP-ERDAT = ITAB-ERDAT.
        APPEND TEMP.
        SELECT SINGLE *
               FROM   ZLEAVE
               WHERE  ZLVID = TEMP-ZLVID
               AND    PERNR = TEMP-PERNR.
        IF SY-SUBRC = 0.
          UPDATE ZLEAVE SET ZSTDT = TEMP-ZSTDT
                            ZENDT = TEMP-ZENDT
                            ZDAYS = TEMP-ZDAYS
                            AEDAT = TEMP-AEDAT
                            ERDAT = TEMP-ERDAT
                 WHERE ZLVID = TEMP-ZLVID
                 AND   PERNR = TEMP-PERNR.
        ELSE.
          INSERT ZLEAVE FROM TABLE TEMP.
          COMMIT WORK.
        ENDIF.
      ENDLOOP.

    Hi,
    open dataset file for input in text mode.
    check sy-subrc = 0.
    while sy-subrc = 0.
      read dataset file into wa.
      if sy-subrc = 0.
      append wa to itab.
      else.
        exit.
      endif.
    endwhile.
    close dataset file.
    regards
    Siggi
    PS: check also the F1-help for open, read and close statements!

Maybe you are looking for