Urgent background call for RFC?

Hello all,
I have designed a RFC(that is FM with RFC tab clicked)
everything is fine ,but i just want to execute this RFC in background.what is the procedure can anybody plz explain.

Hi,
Create an se38 report which calls this function module. Pass all the parameters. You may also give some select options too. Then schedule the report in background, which can satisfy ur requirement.
If u have any further doubts pls post here.
Regards,
Renjith Michael.

Similar Messages

Problem while calling an RFC Function Module in Background

Hello,
I have created a RFC function module for reading data from an external DB system. The FM calls an external RFC program (coded in C++ using RFC SDK), which delivers the required data. This external program is maintainged as an TCP RFC Connection in SM59.
Further I have created a report, that calls the RFC function module to get the data from the external RFC programm.
My problem is, when I call the report in foreground, everything works OK, the RFC connection works and data can be read from the external program.
However, when I schedule the report to run in background as a job, the report is stating in the protocoll that there was a problem calling the defined RFC connection (although the connection is working properly at that time).
More funny is, this particular problem with running in background occurs only in the productive system, in test and development system the report works correctly also while running as a job in background.
Can you suggest the solution to this problem? Could it be something with authorisations or server settings?
I will be on holiday for the next 6 weeks, so take your time to answer .
Regards,
Dusan.
Edited by: Julius Bussche on Jan 22, 2009 7:19 PM
Please read the forum rules about u r g e n t ...

This is an external RFC server program, not a remote enabled ABAP RFC function module as the others seem to be assuming, right?
Is it possible that your DEV and QAS systems only have one application server, but the PROD has many and dedicated one(s) for processing low priority background jobs?
It might be that the target server of your TCP connection is not this BTC instance, and your RFC server is returning the data "locally" - so, into nirvana...
Just guessing, but might be worth checking.
Cheers,
Julius

Calling Synchronous RFC Function Module in Background

Hi all,
Currently we are working on some requirement where in we have to retrieve data from one system(CRM) and update the same into another system(ECC). We have developed a RFC Function in CRM system and it is being called from ECC system as in synchronous mode via a batch program.
Now since all sychronous call to a RFC function will be dialog there is a constraint on the runtime which is being set by maximum run time for each dialog work process. So my question is there an option to call an RFC function synchronously in background (background task) so there is no runtime performance.
The standard TRFC, QRFC calls in background runs asynchronously and so I am trying to check with the SDN world as whether has anyone tried SRFC(Synchronous) call in background?
Thanks in advance,
Jagath

So my question is there an option to call an RFC function synchronously in background (background task) so there is no runtime performance.
One solution would be to increase the value of the "time out" parameter defined the CRM system. This i feel is not a fool-proof solution as the run-times cannot be predicted. Check this thread: Re: RFC timeout profile parameter
For me a better solution would be to implement tRFC call instead of a synchronous call. Any reasons why you don't want to implement a tRFC ?
BR,
Suhas
Edited by: Suhas Saha on Jun 26, 2010 8:52 AM

Handle submit program for background jobs in RFC FM to send email in ITS

Hi all
I am facing a problem in ITS, i.e. I have called a RFC Function Module on the page load event of one of the HTML template. In that FM I have used submit program. This RFC FM is working fine in background i.e. it is sending pdf as email to a particular email address
but in the frontend it is not responding.
I wanted to ask whether we can handle submit <program-name> in background job from ITS
If you are unable to understand the problem i can share with you my code as well.
Thanks
Ekta Tuli

Hi Tobias
The Function Module ZV_FUNC_CCK_EMAIL_PDF is used to generate the email with pdf as attachement. it is generating email at backend but not in frontend.
thanks
ekta
please find the code below for the FM
FUNCTION zv_func_cck_email_pdf.
*"*"Local interface:
*" IMPORTING
*" VALUE(CONTRACT) LIKE VBAP-VBELN
*" VALUE(EMAIL) LIKE ADR6-SMTP_ADDR
*" EXPORTING
*" VALUE(RETURN) TYPE CHAR4
data: i_vbak like vbak .
DATA: v_cont(10) TYPE c.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = contract
 IMPORTING
 output = v_cont.
DATA: z_element(30) TYPE c.
DATA: gv_fb_addr_get_selection LIKE addr1_sel.
DATA: BEGIN OF mtab_contract OCCURS 0, "sap field
 ordno(10), "vbeln (10)
 terr(6),
 vkorg LIKE vbak-vkorg,
 vkgrp LIKE knvv-vkgrp,
 repname(35),
 repmailbox(10),
 gueen(10), "expires dated -same as valid to
 kunnr(10),
 name1(35), "name1(35)
 stras(35), "stras(35)
 pstlz(10), "pstlz(10)
 ort01(35), "ort01(35) city
 regio(3), "regio(3)
 kunnr2(10),
 name2(35), "NUM?(35)
 stras2(35), "stras(35)
 pstlz2(10), "pstlz(10)
 ort012(35), "ort01(35) city
 regio2(3), "regio(3)
 kit1 LIKE vbap-matnr, " currently 41315
 kit1-qty(6), " like vbap-zmeng,
 kit2 LIKE vbap-matnr, " currently 41316
 kit2-qty(6), " like vbap-zmeng,
 kit3 LIKE vbap-matnr, " currently 41317
 kit3-qty(6), " like vbap-zmeng,
 kit4 LIKE vbap-matnr, " currently 91869US
 kit4-qty(6), " like vbap-zmeng,
 med1 LIKE vbap-matnr, " currently 7408cp
 med1-qty(6), " like vbap-zmeng,
 med2 LIKE vbap-matnr, " currently 0211CP
 med2-qty(6), " like vbap-zmeng,
 med3 LIKE vbap-matnr, " currently 0578CP
 med3-qty(6), " like vbap-zmeng,
 med4 LIKE vbap-matnr, " currently 0068CP
 med4-qty(6), " like vbap-zmeng,
 med5 LIKE vbap-matnr, " currently 0069CP
 med5-qty(6), " like vbap-zmeng,
 med6 LIKE vbap-matnr, " currently other
 dis6 LIKE makt-maktx, " currently other
 med6-qty(6), " like vbap-zmeng,
 med7 LIKE vbap-matnr, " currently other
 dis7 LIKE makt-maktx, " currently other
 med7-qty(6), " like vbap-zmeng,
 med8 LIKE vbap-matnr, " currently other
 dis8 LIKE makt-maktx, " currently other
 med8-qty(6), " like vbap-zmeng,
 med9 LIKE vbap-matnr, " currently other
 dis9 LIKE makt-maktx, " currently other
 med9-qty(6), " like vbap-zmeng,
 med10 LIKE vbap-matnr, " currently other
 dis10 LIKE makt-maktx, " currently other
 med10-qty(6), " like vbap-zmeng,
END OF mtab_contract.
DATA: BEGIN OF mtab_material OCCURS 0,
 ordno(10),
 matnr LIKE vbap-matnr,
 qty LIKE vbap-zmeng,
 END OF mtab_material.
DATA: w-mm(4) VALUE ' MM '.
*SELECT-OPTIONS: s_vkorg FOR vbak-vkorg,
* s_vkgrp FOR knvv-vkgrp, "Sales Group
* s_terr FOR knvp-kunn2. "Territory Code
*PARAMETERS: p_parvw LIKE vbpa-parvw MEMORY ID par OBLIGATORY, "Partner ID
** DEFAULT 'Z1'.
* p_vbeln LIKE vbak-vbeln MEMORY ID aun,
* p_email LIKE adr6-smtp_addr MEMORY ID email. "Sales Document #
*SELECT-OPTIONS: "s_vbeln FOR vbak-vbeln MEMORY ID aun, "Sales Document #
* s_guebg FOR vbak-guebg, "Valid-From Date
* s_gueen FOR vbak-gueen, "Valid-To Date
* s_ship FOR vbpa-kunnr, "Ship-to customer
* s_bstzd FOR vbak-bstzd MEMORY ID bst ."DEFAULT 'CCK'. "P.O. # Supplement
DATA: i_otf TYPE STANDARD TABLE OF itcoo,
 i_content_txt TYPE table of solisti1, "Content
 i_content_bin TYPE solix_tab, "Content
 i_content_bin1 TYPE solix_tab, "Content
 i_objhead TYPE soli_tab,
 w_pdf TYPE solisti1, "For PDF
 w_res TYPE itcpp, "SAPscript output
 w_otf TYPE itcoo, "For OTF
 w_transfer_bin TYPE sx_boolean, "Content
 prog(60).
data : t_obj_bin type standard table of solisti1.
DATA: w_arc_params LIKE arc_params,
 w_pri_params LIKE pri_params.
*DATA: lcl_cls TYPE REF TO cl_gui_frontend_services.
CONSTANTS : c_x TYPE c VALUE 'X', "X
 c_locl(4) TYPE c VALUE 'LOCL', "Local Printer
 c_otf TYPE sx_format VALUE 'OTF', "OTF
 c_pdf TYPE sx_format VALUE 'PDF', "PDF
 c_printer TYPE sx_devtype VALUE 'PRINTER', "PRINTER
 c_bin TYPE char10 VALUE 'BIN'. "BIN
DATA: v_name TYPE string ."Downloading File Name
DATA: v_len_in TYPE so_obj_len,
 v_tempdir(50) TYPE c,
 v_size TYPE i.
DATA : x_pdf_bag_tline TYPE rcl_bag_tline,
 v_pdf_fsize TYPE i,
 objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
 objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
 objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
 objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
 reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
 doc_chng LIKE sodocchgi1,
 tab_lines LIKE sy-tabix.
DATA : v_pnum LIKE usr21-persnumber,
 v_anum LIKE usr21-addrnumber,
 smtp_addr LIKE adr6-smtp_addr.
DATA: v_path TYPE string,
 v_code TYPE i.
DATA : wa_obj_txt TYPE solisti1.
DATA : t_obj_txt TYPE STANDARD TABLE OF solisti1.
DATA : t_rec_list TYPE STANDARD TABLE OF somlreci1.
DATA : t_obj_pack TYPE STANDARD TABLE OF sopcklsti1.
DATA : wa_document_data TYPE sodocchgi1. "Mail data
DATA : wa_rec_list TYPE somlreci1.
DATA: reciever TYPE sadrud. "Email address of the receiver
DATA : wa_obj_pack TYPE sopcklsti1.
DATA: v_lines(10) TYPE n.
DATA: binfilesize TYPE i.
DATA : wa_obj_header TYPE solisti1.
DATA : t_obj_header TYPE STANDARD TABLE OF solisti1.
DATA : obj_id TYPE sofolenti1-object_id. "To send a file as attatchment
data: pdftab type table of tline with header line.
data : flag_sent_to_all type sonv-flag.
*START-OF-SELECTION.
* IF lcl_cls IS INITIAL.
* CREATE OBJECT lcl_cls.
* ENDIF.
CLEAR i_vbak.
SELECT * FROM vbak into i_vbak
 WHERE
* guebg IN s_guebg AND "Valid-From Date
* gueen IN s_gueen AND "Valid-To Date
* vkorg IN s_vkorg AND
 vbeln = v_cont AND
* AUART = 'LP ' AND "Converts to 'CO ' Scheduling A
 auart = 'KM ' AND "Converts to 'CQ ' Qty contract
* VBTYP = 'E' AND "sales doc cat? JM
 vbtyp = 'G' ."AND "sales doc cat "JM
* bstzd IN s_bstzd.
 mtab_contract-kunnr = i_vbak-kunnr.
 mtab_contract-ordno = i_vbak-vbeln.
 mtab_contract-vkorg = i_vbak-vkorg.
 WRITE i_vbak-gueen TO mtab_contract-gueen. "CHG014419
 APPEND mtab_contract.
ENDSELECT.
LOOP AT mtab_contract.
* PERFORM get_contract. "CO sales orders line items
******Get Contract*********
* SELECT SINGLE kunnr "partner
* INTO vbpa-kunnr
* FROM vbpa
* WHERE vbeln EQ mtab_contract-ordno
* AND posnr EQ '000000'
* AND parvw EQ 'WE' "Ship-To's
* AND kunnr IN s_ship. "Ship-To ID added 04/01/99
* IF sy-subrc EQ 0 .
* MOVE vbpa-kunnr TO mtab_contract-kunnr2.
* MODIFY mtab_contract.
* ELSE.
* EXIT.
* ENDIF.
CLEAR knvp.
SELECT SINGLE kunn2 "territory
 INTO knvp-kunn2
 FROM knvp
 WHERE kunnr EQ mtab_contract-kunnr2
 AND vkorg EQ mtab_contract-vkorg
 AND parvw EQ 'Z6'.
* AND kunn2 IN s_terr .
IF sy-subrc EQ 0 .
 MOVE knvp-kunn2 TO mtab_contract-terr.
 MODIFY mtab_contract.
ELSE.
 EXIT.
ENDIF.
CLEAR kna1. "get rep name and mail box
SELECT SINGLE name2 FROM kna1 INTO (kna1-name2)
 WHERE kunnr = knvp-kunn2.
IF sy-subrc EQ 0 .
 SPLIT kna1-name2 AT w-mm INTO mtab_contract-repname
 mtab_contract-repmailbox.
 mtab_contract-repmailbox+3 = mtab_contract-repmailbox.
 mtab_contract-repmailbox(3) = 'MM'.
 MODIFY mtab_contract.
ENDIF.
CLEAR knvv.
SELECT SINGLE vkgrp
 INTO knvv-vkgrp
 FROM knvv
 WHERE kunnr EQ knvp-kunn2
 AND vkorg EQ mtab_contract-vkorg.
* AND vkgrp IN s_vkgrp.
IF sy-subrc EQ 0 .
 MOVE knvv-vkgrp TO mtab_contract-vkgrp.
 MODIFY mtab_contract.
ELSE.
 EXIT.
ENDIF.
mtab_contract-med1-qty = '_______'.
mtab_contract-med2-qty = '_______'.
mtab_contract-med3-qty = '_______'.
mtab_contract-med4-qty = '_______'.
mtab_contract-med5-qty = '_______'.
mtab_contract-med6-qty = '_______'.
mtab_contract-med7-qty = '_______'.
mtab_contract-med8-qty = '_______'.
mtab_contract-med9-qty = '_______'.
mtab_contract-med10-qty = '_______'. "JM
mtab_contract-kit1-qty = '____'.
mtab_contract-kit2-qty = '____'.
mtab_contract-kit3-qty = '____'.
mtab_contract-kit4-qty = '____'.
mtab_contract-dis6 = 'OTHER _____________________'. "JM
mtab_contract-dis7 = 'OTHER _____________________'. "JM
mtab_contract-dis8 = 'OTHER _____________________'. "JM
mtab_contract-dis9 = 'OTHER _____________________'. "JM
mtab_contract-dis10 = 'OTHER _____________________'. "JM
* SELECT * FROM VBAP WHERE VBELN = MTAB_CONTRACT-ORDNO.
* IF VBAP-MATNR = '7408CP'.
* MTAB_CONTRACT-MED1 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '0211CP'.
* MTAB_CONTRACT-MED2 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '91865US'.
* MTAB_CONTRACT-MED3 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '0578CP'.
* MTAB_CONTRACT-MED4 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '0068CP'.
* MTAB_CONTRACT-MED5 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '0069CP'.
* MTAB_CONTRACT-MED6 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '92055CP'. "JM
* MTAB_CONTRACT-MED7 = VBAP-MATNR. "JM
* ELSEIF VBAP-MATNR = '90799CP'. "JM
* MTAB_CONTRACT-MED8 = VBAP-MATNR. "JM
* ELSEIF VBAP-MATNR = '41315'.
* MTAB_CONTRACT-KIT1 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '41316'.
* MTAB_CONTRACT-KIT2 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '41317'.
* MTAB_CONTRACT-KIT3 = VBAP-MATNR.
* ELSEIF VBAP-MATNR = '91869US'.
* MTAB_CONTRACT-KIT4 = VBAP-MATNR.
* ELSE.
* SELECT SINGLE MAKTX INTO MAKT-MAKTX
* FROM MAKT WHERE MATNR = VBAP-MATNR.
* ENDIF.
* MODIFY MTAB_CONTRACT.
* ENDSELECT.
MODIFY mtab_contract.
* IF.
** mtab_contract-terr IN s_terr AND
** mtab_contract-kunnr2 IN s_ship AND
** mtab_contract-vkgrp IN s_vkgrp.
** PERFORM get_address.
* ELSE.
* DELETE mtab_contract INDEX sy-tabix.
* ENDIF.
ENDLOOP.
SORT mtab_contract BY terr.
* PERFORM set_print_option.
* Print defaults should be immed and delete after print...
itcpo-tdimmed = ' '.
itcpo-tddelete = 'X'.
itcpo-tdnewid = 'X'.
itcpo-tdcopies = 1.
itcpo-tdnoprev = 'X'.
itcpo-tdgetotf = 'X'.
itcpo-tddest = 'LOCL'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
 EXPORTING
 destination = 'LOCL'
 no_dialog = 'X'
 IMPORTING
 out_archive_parameters = w_arc_params
 out_parameters = w_pri_params.
*exit if cancel chosen*
IF sy-subrc NE 0.
 EXIT.
ENDIF.
sadr-regio = 'CA'.
sadr-pstlz = '92620'.
LOOP AT mtab_contract.
* PERFORM check-for-values.
IF mtab_contract-ordno = space.
 mtab_contract-ordno = '___________'.
ENDIF.
IF mtab_contract-terr = space.
 mtab_contract-terr = '______'.
ENDIF.
IF mtab_contract-repname = space.
 mtab_contract-repname = '___________________________________'.
ENDIF.
IF mtab_contract-repmailbox = space.
 mtab_contract-repmailbox = '__________'.
ENDIF.
IF mtab_contract-kunnr = space.
 mtab_contract-kunnr = '__________'.
ENDIF.
IF mtab_contract-name1 = space.
 mtab_contract-name1 = '___________________________________'.
ENDIF.
IF mtab_contract-stras = space.
 mtab_contract-stras = '___________________________________'.
ENDIF.
IF mtab_contract-pstlz = space.
 mtab_contract-pstlz = '__________'.
ENDIF.
IF mtab_contract-ort01 = space.
 mtab_contract-ort01 = '___________________________________'.
ENDIF.
IF mtab_contract-regio = space.
 mtab_contract-regio = '___'.
ENDIF.
IF mtab_contract-kunnr2 = space.
 mtab_contract-kunnr2 = '__________'.
ENDIF.
IF mtab_contract-name2 = space.
 mtab_contract-name2 = '___________________________________'.
ENDIF.
IF mtab_contract-stras2 = space.
 mtab_contract-stras2 = '___________________________________'.
ENDIF.
IF mtab_contract-pstlz2 = space.
 mtab_contract-pstlz2 = '__________'.
ENDIF.
IF mtab_contract-ort012 = space.
 mtab_contract-ort012 = '___________________________________'.
ENDIF.
IF mtab_contract-regio2 = space.
 mtab_contract-regio2 = '___'.
ENDIF.
* PERFORM open_form.
CALL FUNCTION 'OPEN_FORM'
 EXPORTING
 dialog = ' '
 form = 'ZREV_CCK_AGREMT'
 language = sy-langu
 OPTIONS = itcpo
 EXCEPTIONS
 canceled = 1
 device = 2
 form = 3
 OPTIONS = 4
 unclosed = 5
 OTHERS = 6.
IF sy-subrc <> 0.
 MESSAGE e000(zz) WITH 'Open Form Error. ' sy-subrc.
ENDIF.
 z_element = 'MAIN'.
* PERFORM write_form.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = z_element
 EXCEPTIONS
 element = 1
 function = 2
 type = 3
 unopened = 4
 unstarted = 5
 window = 6
 OTHERS = 7.
* PERFORM close_form.
CALL FUNCTION 'CLOSE_FORM'
 IMPORTING
 RESULT = w_res
 TABLES
 otfdata = i_otf
 EXCEPTIONS
 unopened = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE e000(zz) WITH 'Close Form Error. ' sy-subrc.
ENDIF.
*&---Convert OTF data to PDF data.
call function 'CONVERT_OTF'
 exporting
 format = 'PDF'
 importing
 bin_filesize = binfilesize
 tables
 otf = i_otf
 lines = pdftab[].
data : name LIKE RLGRAP-FILENAME.
CONCATENATE 'C:Temp' mtab_contract-ordno '.pdf' INTO v_name.
*CALL FUNCTION 'DOWNLOAD'
* EXPORTING
* bin_filesize = v_size
* filename = name
* filetype = 'BIN'
* TABLES
* data_tab = pdftab[].
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
* BIN_FILESIZE =
 filename = v_name
 FILETYPE = 'BIN'
 tables
 data_tab = pdftab[].
* Downloading the PDF File
* CALL METHOD lcl_cls->gui_download
* EXPORTING
* bin_filesize = v_size
* filename = v_name
* filetype = c_bin
* CHANGING
* data_tab = pdftab[].
CALL METHOD cl_gui_cfw=>flush.
**Send PDF as Email.
* wa_obj_txt-line = 'CCK Contract Agreement'.
APPEND wa_obj_txt TO t_obj_txt.
CLEAR wa_obj_txt.
wa_obj_txt-line = 'Please find attatched PDF document for Contract'.
APPEND wa_obj_txt TO t_obj_txt.
CLEAR wa_obj_txt.
DESCRIBE TABLE t_obj_txt LINES tab_lines.
**Prepare document data
wa_document_data-obj_name = 'CCK Contract Agreement'.
wa_document_data-obj_descr = 'CCK Contract Agreement'.
wa_document_data-obj_langu = sy-langu.
wa_document_data-proc_type = 'R'.
wa_document_data-proc_name = 'CCK'.
wa_document_data-priority = c_x.
wa_document_data-obj_prio = c_x.
**Receiving list
wa_rec_list-receiver = sy-uname.
wa_rec_list-rec_type = 'B'.
wa_rec_list-com_type = 'INT'.
wa_rec_list-notif_del = c_x.
APPEND wa_rec_list TO t_rec_list.
CLEAR wa_rec_list.
wa_rec_list-receiver = '[email protected]'."p_email.
reciever = wa_rec_list-receiver.
wa_rec_list-rec_type = 'U'.
wa_rec_list-com_type = 'INT'.
wa_rec_list-notif_del = c_x.
APPEND wa_rec_list TO t_rec_list.
CLEAR wa_rec_list.
*Object packet
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
 EXPORTING
 line_width_src = 134
 line_width_dst = 255
 TABLES
 content_in = pdftab[]
 content_out = t_obj_bin
 EXCEPTIONS
 err_line_width_src_too_long = 1
 err_line_width_dst_too_long = 2
 err_conv_failed = 3
 OTHERS = 4
IF sy-subrc <> 0.
ENDIF.
DESCRIBE TABLE t_obj_bin LINES v_lines.
CLEAR wa_obj_pack-transf_bin .
wa_obj_pack-head_start = 1.
wa_obj_pack-head_num = 0.
wa_obj_pack-body_start = 1.
wa_obj_pack-body_num = tab_lines.
wa_obj_pack-doc_type = 'RAW'.
wa_obj_pack-doc_size = tab_lines * 255.
APPEND wa_obj_pack TO t_obj_pack.
CLEAR wa_obj_pack.
wa_obj_pack-transf_bin = 'X'.
wa_obj_pack-head_start = 1.
wa_obj_pack-head_num = 0.
wa_obj_pack-body_start = 1.
wa_obj_pack-body_num = v_lines.
wa_obj_pack-doc_type = 'PDF'.
wa_obj_pack-obj_name = 'ATTATCHMENT'.
wa_obj_pack-obj_descr = mtab_contract-ordno.
wa_obj_pack-doc_size = binfilesize.
APPEND wa_obj_pack TO t_obj_pack .
CLEAR wa_obj_pack.
**Object header
wa_obj_header-line = 'PDF'.
APPEND wa_obj_header TO t_obj_header.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = wa_document_data
 put_in_outbox = c_x
 commit_work = c_x
 IMPORTING
 sent_to_all = flag_sent_to_all
 new_object_id = obj_id
 TABLES
 packing_list = t_obj_pack
 object_header = t_obj_header
 contents_bin = t_obj_bin
 contents_txt = t_obj_txt
 receivers = t_rec_list
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
IF sy-subrc <> 0.
else.
return = 'true'.
ENDIF.
ENDFUNCTION.
 Flow Editor
<flow>
 <state name="Start">
 <module name="ZV_FUNC_CCK_EMAIL_PDF" type="RFC" stateful="1">
 <inputmapping source="Contract" target="CONTRACT"/>
 <inputmapping source="email" target="EMAIL"/>
 </module>
 <module name="ZV_FUNC_CCK_VALIDATE_SHIPTO" type="RFC" stateful="1">
 <inputmapping source="SHIP_TO" target="KUNNR"/>
 <inputmapping source="USERNAME" target="USER"/>
 <outputmapping source="CITY" target="CITY"/>
 <outputmapping source="NAME" target="NAME"/>
 <outputmapping source="POSTAL" target="POSTAL"/>
 <outputmapping source="REGION" target="REGION"/>
 <outputmapping source="RETURN" target="RETURN"/>
 <outputmapping source="SD_CITY" target="SD_CITY"/>
 <outputmapping source="SD_NAME" target="SD_NAME"/>
 <outputmapping source="SD_POSTAL" target="SD_POSTAL"/>
 <outputmapping source="SD_REGION" target="SD_REGION"/>
 <outputmapping source="SD_STREET" target="SD_STREET"/>
 <outputmapping source="SOLDTO" target="SOLDTO"/>
 <outputmapping source="STREET" target="STREET"/>
 </module>
 </state>
 <event name="onLoad" next_state="Start"/>
 <event name="Check2" next_template="ZV_CCO_CONFIRMED_ORDER"/>
</flow>

Flat File-to-RFC question, multiple RFC calls for one file.

Hi guys,
I'm quite new to XI / PI and I have a question regarding a File-to-RFC scenario we're trying in NW PI 7.1.
We have a flat file which has two lines with two fields each, let's take this as an example :
001,001
002,002
The files needs to be converted to XML and then transferred to the RFC program which will update a table with the values above.
In the ESR I've created 3 data types (z_row1,z_record1 and z_fileinput1), 1 message type (z_file2rfc_ob_mt), 1 message mapping (z_file2rfc_mm), 2 Service Interface (z_file2rfc_ob_si and z_file2rfc_ib_ztestpi) and 1 operation mapping (z_file2rfc_om).
In the Integration Builder (ID) I've created everything required (The sender and receiver communication channels, sender and receiver agreement, receiver determination and interface mapping).
We're also using content conversion to convert the flat file to XML, this does seem to work because I see all the lines/field in the message when it gets into PI. The problem is that the RFC can only accept two fields at a time and only the first line gets updated. I see that only the first line gets sent to the RFC.
How can I make the RFC call for each and every line ?
Thanks !!

Create the RFC with table, which takes multiple lineitem as input and update the table in single call.
If you want response back then call RFC as synchrounous else in Asynchrounous mode.
By doing this in single call it will update the complete table.
Gaurav Jain
Reward Points if answer is helpful

How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

Hello
We use SRM Server 5.5 with classic scenario.
We want to call RFC in R/3 from webdynpro ABAP.
How can we do that?
We are developing the web report using webdynpro abap.
So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro. So we call the R/3 RFC to display the PR, PO data.
But I tired to call the RFC in R/3, We could not call it.
How to call the RFC from R/3 to SRM, when we use webdynpro abap?
Thank you,
Best Regards,
SH.

Hi
Please look at the following threads as well ->
WebDynpro in SRM
BAPI's /RFC's in SRM
BAPI to Change Shopping Cart by RFC
SRM60 and webdynpro
Webdynpro Services Exception
WebDynpro using BAPI has an error
SRM60 and webdynpro...
SAP uses META Function modules in SRM to get data from R/3 back-end.
For getting Purchase requistion data, use the function modules ->
META_REQUISITION_CHANGE Change purchase requisition
META_REQUISITION_CREATE Create Requisition
META_REQUISITION_DELETE Delete/close purchase requisition
META_REQUISITION_GETDETAIL Display requisition details
META_REQUISITION_GETITEMS Display requisition items
META_REQUISITION_GETRELINFO Get Releasease Info for requisitions
For getting Purchase order data, use the function modules ->
META_PO_CREATE Create purchase order
META_PO_DELETE Delete reservation
META_PO_GETDETAIL Display purchase order details
META_PO_GETITEMS Display purchase order items
META_PO_GETRELINFO Display purchase order release information
Hope this will definitely help. Do let me know.
Regards
- Atul

Target system(Destination) for RFC call ?

Need some help in calling an RFC for xi interface.
For triggering the data in to xi , RFC needs to be called. This RFC can be called using an ABAP Program / report . BUT inorder to call that RFC a Destination / Target system needs to be defined . Even though RFC destinations can be managed by transaction SM59 what will be the target system for calling this RFC in a generic sense?
Like what destination i should be expecting this code : ?
REPORT Z_TEST.
CALL FUNCTION 'ZFunctest' destination ????
Please suggest
Krishna

Yes i now understand the scenario : well is this statment correct ?
When we say like this :
CALL Function 'ZTEST' Destination SIDCLNT015
does this mean ZTEST should be there in destination system ? which means the RFC i am writing should be there on xi systems whose system id is SID ?
As i heard some where that ZTEST should be there on targetsystem i call for ?
Please suggest
Krishna

Which paramter configures the timeout for rfc call (to R/3 ) from BPM

hi froum,
i have a scenario, with BPM, in which theres a synchronous send to a rcf Function Module in R/3,
now, can u tell me which paramter decides the time out for this Sync call to rfc enabled Function Module in R/3,
i mean which paramater in SXMB_ADM or anywhere else that dictates the time period

Check this out, RFC adapter section
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
Prateek

RFC Call for EarlyWatch

Hi,
What is the RFC Call for EarlyWatch with regards to extracting a monitoring report?
Thanks
John

Hi John,
Solution Manager can use its own BI or a remote BI.
If it is local the RFC will be 'NONE'
The table is E2E_WA_CONFIG
Type = SAP_BID
LINE = 1
STRING = NONE
If there is an entry of the Type =SAP_BID_M it will overrule SAP_BID
The STRING= 'value' will be the RFC that is used.
Both SAP_BID abd SAP_BID_M are found in Table E2E_WA_CONFIG
Regards,
Paul

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

SRM calls solman rfc for any transaction

Hi,
When I execute any tcode in SAP SRM or want to check any settings through SPRO it is directing me to Solman RFC and asks for user / password.
How can I check where this settings are maintained?
Thanks & Regards,
Yogesh Cheulkar

Hi Juan,
Even I am surprised why this RFC is being called for simple transaction.
After entering user and password for rfc logon screen I am able to continue with transacaction.
But even if I skip this step of user and password without entering password it is allowing.
Only problem is it is continuously asking for each steps.
Thanks & Regards,
Yogesh Cheulkar

XML pay load for RFC call in java mapping

Hi,
I searched in many forums about the payload to be given for RFC Lookup from a functional module,but i think i am not able to get it correct.
Can any one please give me the exact structure of XML Payload to be sent while invoking the function module via RFC LOOKUP
Say i have 2 import parameters(input1,input2) and one output(output1)......
Thanks in advance,
H.L.Babu

>
hlbabu123 wrote:
> Hi,
> I searched in many forums about the payload to be given for RFC Lookup from a functional module,but i think i am not able to get it correct.
>
> Can any one please give me the exact structure of XML Payload to be sent while invoking the function module via RFC LOOKUP
>
> Say i have 2 import parameters(input1,input2) and one output(output1)......
>
> Thanks in advance,
> H.L.Babu
have a look at this document - https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439&overridelayout=true
in case u still have issues do get back

Java call to RFC FM for replacing CRM pricing

Hi Experts,
I have a requirement to make a RFC call to retrieve the pricing from ECC in CRMD_ORDER transaction after hit enter key with product/qty entry (use Web UI/shop/IC as frontend). Is it possible to made a Java call to RFC FM in SAP CRM which in turn calls R/3 to execute pricing and display this price on web order page? If yes, any documentation/samples and advise please.
Thanks in advance, Jin

Hi all,
Following the AP7 Pricing Userexit Manual, I can change the price value in the exit (good doc, thanks). my next steip is to get sales org, customer and product info to make RFC, but I don't know from which Interface I can retrieve these info, can anyone help me? any doc or sample code?
Thanks, Jin

Regarding: calling a rfc function module for web dynpro for JAVA

Hello all,
I want to call an rfc enabled function module from webdynrpo application.
*and there is one condition that function module should be called not threw bapi.*
Thanks
Edited by: Punit Pawar on Jul 21, 2008 10:38 AM

Hi
You can call RFC(remote enabled) from R/3 through Models in Webdynpro Java.You need to have JCO destinations.You connection properties of backend System
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0310cf8-8cdb-2910-4a82-df1f11619f4e
Thanks,
Tulasi Palnati

Where may I download package for JAVA call SAP RFC

Hi all,
I need to call a RFC in a JAVA based system. I found I need to install two package before I call, such as:
import com.sap.rfc.*;
import com.sap.rfc.exception.*;
import com.ibm.sap.bapi.*;
import com.ibm.sap.bapi.generated.*;
where can I download these 2 package?
Thanks a lot in advance.
Ned

Hai ,
im telling in Eclipse ..
Take a look to see that those packages are listed in the plug-ins under
Windows > Preferences > Target Platform. This should point to an Ecilpse
installation which should have most of those packages.
You will need to install GEF separately. It does not come with Eclpse. Go
to http://www.eclipse.org/gef/ and click on Downloads.
Regards ,
Venkat

Urgent background call for RFC?

Similar Messages

Maybe you are looking for