Urgent - Create new chat rooms for discussion

HI
Can anyone tell me how the user able to
a. Create new chat rooms for discussion
b. Assign groups who can usr collaboration
Thanks
shashank
Urs answer must be appreciat.

Hi Shahshank,
If you want to add user groups while creating a room also.. it is the same procedure.. instead of username enter the group name and add it as memebers.. this is from the room creation wizard itself.
Else if you want to add usergroups to an already existing room then you will have to make use of the Member Maintenance or room maintenance iview from where you can add or delete or change users permissions for an existing room.for this refer to
http://help.sap.com/saphelp_nw04/helpdata/en/2a/dfa0404dd52b54e10000000a1550b0/frameset.htm
Hope this helps,
Regards
Uma.
Also, the SDN way of Thanking is by assigning points to helpful answers !!!

Similar Messages

How can we create new pricing requirement for a condition type

Hi All,
I am in urgent need of creating new pricing requirements for a condition type.
Or if there is already a conditin type existing and we want to make changes in the pricing requirements of that condition type, How can we do so ?
In short if you can let me know how does pricing get impacted by the condition types.
Thanks
Mark

Hi!
The common transactions for condition mantaining are VK11, VK12, VK13.
In SPRO - Sales and distributoin - Basic function - Pricing - Pricing control - *.
Is this what you want?
Regards
Tamá

Can anyone tell me if JSP can create any chat room?

Can anyone tell me if JSP can create any chat room? And how can i go about it? Can you give me some ideas about it???

JSP is not so good for this because it creates the page and waits for the user to act, rather than updating itself. You can see how this might work on http://www.half-empty.org where they have a sort of chat-room based on jsp. That page is based on Open Sourced code anyways, so you can take a look at the source code for it yourself as long as you are prepared to GPL anything you produce afterwards. However, I would recommend writing your own client-server system.
There are loads of chatroom examples available online and to be honest you are best looking some of them out using Google.

How to create new Partner Numbers for WE20?

Hello colleagues!
While creating new Source System for R/3 system in automatic mode providing existing RFC (SM59), system errored with message E0552 "Error during insert in port table".
I tried creating new Partner Profile "FI5FIN100D" in WE20 (partner type=LS of course) by copying existing "FI2FIN200D" partner profile (LOGICAL SYSTEM also), but I received error:
==================
Enter a permissible partner number
Message no. E0342
Diagnosis
The partner number 'FI5FIN100D' does not exist for the partner type 'LS'.
Procedure
Enter a valid partner number and make sure that this partner number exists for the partner type
===================
Where do I create this in BW? I tried WEDI but I received error:
=========
Transaction WEDI is an area menu and cannot be executed
Message no. OZ037
=========
I have SAP BW 3.0b, SP 26, Basis/Abap SP 48.
Can somebody help please?
Thank you in advance.
Mario Vallejo.

Hi Mario,
       In Partner Feild u have give the Logical System Name i.e particular to the client which is already create in SALE Transaction.It is taken by Basis People i think.I think it is already created .give that Logical sytem name in Partner Number.
For ex Partner Number: LGS100(This is created in SALE
                              Tr and assign it to
                              client i.e like 100 or 200)
       Partner Type : LS
     In PostProcessing Tab
         Type : 'US' or 'o'(depending on client)
        Agent : Randomly it (Generates)creates Number
        Lang : EN
Hope This Help
Sreeni

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Create new CBO statistics for the tables

Dear All,
I am facing bad performance in server.In SM50 I see that the read and delete process at table D010LINC takes
a longer time.how to create new CBO statistics for the tables D010TAB and D010INC. Please suggest.
Regards,
Kumar

Hi,
I am facing problem in when save/activating any problem ,so sap has told me to create new CBO statistics for the tables D010TAB and D010INC
Now as you have suggest when tx db20
Table D010LINC
there error comes Table D010LINC does not exist in the ABAP Dictionary
Table D010TAB
     Statistics are current (|Changes| < 50 %)
New Method           C
New Sample Size
Old Method           C                       Date                 10.03.2010
Old Sample Size                              Time                 07:39:37
Old Number                51,104,357         Deviation Old -> New       0 %
New Number                51,168,679         Deviation New -> Old       0 %
Inserted Rows                160,770         Percentage Too Old         0 %
Changed Rows                       0         Percentage Too Old         0 %
Deleted Rows                  96,448         Percentage Too New         0 %
Use                  O
Active Flag          P
Analysis Method      C
Sample Size
Please suggest
Regards,
Kumar

How to create new text symbols for the standard program.

Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen.
I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones.
Does anybody know something about that? Thank you.

hi ming yu,
example : %_MATNR_%_APP_%-TEXT -> this is the material description name in mb5b
change the description in ur enhancement implementation
%_MATNR_%_APP_%-TEXT = 'Material'
it is works only input/output field
Thanks&Regards,
naveen

How to create new starting conditions for a workflow of shopping cart

Hi all,
How to create new starting conditions for a workflow of shopping cart
SATYA

Excecute SWB_COND
Creating New:
Click on Create button. If you cannot see that it could be a authorization issue
then Business Object: BUS2121
Double Click the event linkage for one step workflow
Define the expressions, Check Consistency and click on Traansfer
Start Condition is created. If it is not Active click on the Red Button to make it Active
Editing Already existing:
Click on Edit Button If you cannot see that it could be a authorization issue
then select Business Object: BUS2121
Click on the condition part (White area) of the start condtion needing editing
Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

Create new business transaction for OBV3.

Dear All
In OBV3 how to create Business transactions as i want to create new
business transactions for the same.
Regards
VG

Dear All
Business transactions are system defined .
Thanks
VG

Unable to create new structure code for System Items flexfield

Hi
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Regards
Reem

Hi Everyone,
Lets address your exact problem ::
I installed the R12 with Vision. In the System Items flexfield, I find one structure code "SYSTEM_ITEMS". But I am not able to create new code as I am getting the error. "FRM-41051 - Cannot create new records here ". Also the New icon is disabled.
Is this how it is supposed to work? Cant we create new structure code for System Items flexfield in Vision Database? Please help me to resolve this.
Yes ! The answer is that this is exactly how it is supposed to work.
In Inventory :: [ System Items KFF ] is supposed to be single structure whereas Item-Categories has Multi-Structure option.
For every Single Instance :: It is like this only ~ as a standard functionality.
And this becomes very very challenging ( but a very fruitful & long lasting ) exercise.
Thrash it with the clients :: Why should you ever have 2-3 different Item codification schemas when its the same enterprise ?
They might respond with different intelligence incorporated in the Item Codes.
Most of the Intelligence can be shifted to the Item-Categories as they are not long lasting.
&&&& This means that either you can push for non-significant part numbering schema or the partial intelligence.
Keep it small & simple !!
Ajay Kuma, 510-456-5322

Support , This is Thamer mohammad ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes

Support ,
This is Thamer mohammad
,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes

These boards aren't Apple Support; nobody here can reset the questions. Click here, phone Apple, and ask for the Account Security team, or fill out and submit this form.
(90021)

HT5312 Dear Apple Support , I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes

Dear Apple Support , I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes
<Email Edited by Host>

Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post personal information on a Public Forum.
I have requested the Hosts remove it for you
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers.

Dear Apple Support , This is amany alnajjar ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .

Dear Apple Support ,
This is amany alnajjar ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

Dear Apple Support , This is ***Abdurrahman*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes,

Dear Apple Support ,
This is ***Abdurrahman*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes,

The people on these boards aren't Apple Support and can't do that for you. You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102461)

Urgent - Create new chat rooms for discussion

Similar Messages

Maybe you are looking for