Urgent help!!how to count the no of fields retrieved by recordset??
hello friends,
i need to count the no of fields and not rows returned by the recordset
plz. help me soon,
Ex. rs.executeQuery("select * from table");
now how many columns will be there in the table,i need to know that
thanx in advance,its urgent so reply soon,
Vishal
hey, i am getting an error as follows
cannot resolve symbol
symbol : method getMetaData (java.lang.String)
location: class front1
ResultSetMetaData rmd= getMetaData(globals.s);
^
1 error
can u expand the code a bit , so this error is solved ?
thanx again
Similar Messages
-
How to count the no of fields returned by recordset?
hi friends,
how can i know how many columns have been returned by the recordset
ex. rs.executeQuery("select * from table");
now how many columns r there in the table, can this be known?
thanx in advance,
VishalResultSetMetaData rsmd = rs.getMetaData();
int columnCount = rsmd.getColumnCount();ResultSetMetaData will provide you with a great deal of information about the ResultSet - check out the API here: http://java.sun.com/j2se/1.4.1/docs/api/java/sql/ResultSetMetaData.html
Hope this helps! -
Urgent help: How to remove the accumaltion when show movies step by step with buttons
I want to show the movie step by step by clicking the next
button. Inside each frame, many movie clips are generated
dynamically at runtime, and they can be played interactively.
I achieves the step-by-step display of those frames by adding
another layer with the action stop(). But I got one trouble: all
the movie clips from previous frames are accumalted. How to remove
the accumulation from previous frames?
For the continuous display of the movie, I tried to use
onEnterFrame() and change the _visible property of all the movie
clips to false in this function. But it doesn't work for the
step-by-step display. Once I click the next button, the movie clips
at the current frame just show very quickly, then disappear. What
should I do?
I need to fix this immediately.
Your help would be greatly appreciated.
- zcxyou can use the removeMovieClip() method for those movieclips
added dynamically. -
Urgent HELP - How to reduce the number of entries in table MESYBODY?
Does anyone know how to reduce the number of records in synchronization table MESYBODY and MESYHEAD? The reason I wanted to reduce these tables is because I believe they have so many duplicated entries that causes extremely slow performance everytime we sync. Currently, there are almost 50,000 records for approximately 100 users, and I believe it shouldn't be that much.
We are running into a problem that it takes approximately 25-30 minutes to sync.
Any advices would be highly appreciated.
Regards,
DaiHi Dai,
please try to run the middleware job WAF_MW_MAPPING. For some applications (Mobile Time and Travel for example) this helps to clean the tables.
Br, alex
alexander ilg
http://www.msc-mobile.com -
How to hide the select-options fields on radiobutton select in webdynpro
hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement belowHi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k -
How to count the number of AAA clients
Hi,
As we know, ACS5.2 is required with a base license-- supporting 500 network devices.
Sometimes there are lots of AAA clients or network devices that are authenticating simultanious. So my question is, how to count the network devices allowed to auth on ACS5.2? Does that only include network devices, or including both any network devices or AAA clients?
Rgds,
Laowu5017Hi,
ACS 5.x counts the number of AAA clients that are configured on the ACS.
Please note that AAA clients and networks devices is the same and they comply switches, routers, WLCs, or whatever other device configured under
Network Resources >
... >
Network Devices and AAA Clients
AAA Clients are NOT the AAA suplicants.
The end user clients PCs are the AAA suplicants, and for this there is no limit number.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
How to count the no of record in grid.
Hi Experts,
I have one database block & this is bolck has contain 4 non database item is there. In database block has contain the id and description is non database block item. While i m querying the data description is shown depends up on ID. It is in grid. How to count the no of record in grid. My code is
LV_CUR_ITM :=:SYSTEM.CURSOR_RECORD;
FOR I IN 1.. LV_CUR_ITM LOOP
LAST_RECORD;
SELECT NSN_NO INTO :ORD_DIS_NSN_ITEM_DET.NSN_NO
FROM NSN_MST WHERE NSN_ID= :ORD_DIS_NSN_ITEM_DET.NSN_ID;
SELECT FOB_PRICE INTO :ORD_DIS_NSN_ITEM_DET.FOB_PRICE
FROM PRODUCT_SUPPLIER WHERE PRD_ID_NUMBER= :ORD_DIS_NSN_ITEM_DET.PRD_ID_NUMBER
AND BAS_ORG_ID_NUMBER=:ORD_DIS_NSN_ITEM_DET.ORG_ID_NUMBER;
SELECT DESCRIPTION INTO :ORD_DIS_NSN_ITEM_DET.PRD_DESC
FROM PRODUCT WHERE ID_NUMBER= :ORD_DIS_NSN_ITEM_DET.PRD_ID_NUMBER;
SELECT FULL_NAME INTO :ORD_DIS_NSN_ITEM_DET.SUPP_NAME
FROM ORGANISATION WHERE ID_NUMBER=:ORD_DIS_NSN_ITEM_DET.ORG_ID_NUMBER;
NEXT_record;
END LOOP;
Thx in advance.Hai,
Add a Non database item to that block, and set the Calculation Mode as Summary, and Summary Function to Count.
Then u will get the total no of records from this text. ( You can hide this, so that the use won't see it. )
OR
go to the Last Record, then
LV_CUR_ITM :=:SYSTEM.CURSOR_RECORD; This will also work.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks. -
How to count the number or rows in file
Hi Experts,
I am file as source and Oracle as target. My file containing the some data which is going to load to the target.
My requirement is that I want to count the number of rows which my file contains. Please help me how to count the total number of rows in file.
Thx,
Sahadeva.Hi,
You won't give a name DEST_USER_NAME:ODI will get these information.
it is important Command on source and Command on Source side .
-Pls write jython code on Command on Source side
-And Command On Target side Choose technology as Oracle and set logical schema to HR_logical
Sorry my mistake.İt is related jython syntax.Here is code:
import java.lang as lang
import java.sql as sql
import java.lang.String
import os
lang.Class.forName("<%=snpRef.getInfo("DEST_JAVA_DRIVER")%>")
cons=sql.DriverManager.getConnection("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")
dblinks= cons.createStatement()
file1=open('EMP.txt','r')
count=0
line=file1.readline()
while line !='':
count+=1
line=file1.readline()
file1.close()
sqlQuery = "insert into HR.ETL_FILE_LOG (FILE_COUNT) values (count)"
rqQuery= dblinks.execute(sqlDBLink)
cons.close()
Regards -
How to count the number of rows in a resultser object?
hi there
how to count the number of rows in a resultser object which may contains millions of rows? besides using a while loop? thanksYou don't, you execute a query whose result is the record count of those records that match the search and then you execute the actual query to create your record set. Typically you do
select count(id) from YourTable where [filter]
from the resulting ResultSet do
int res.getInt(1);
which gives you the count and then
select id from YourTable where [filter]
to produce the actual result set.
in the second query the id part can be substituted with the actual fields you want. -
Programming help - how to get the read-only state of PDF file is windows explorer preview is ON?
I'm developing an application where a file is need to be saved as pdf. But, if there is already a pdf file with same name in the specified directory, I wish to overwrite it. And in the overwrite case, read-only files should not be overwritten. If the duplicate(old) file is opened in windows (Win7) explorer preview, it is write protected. So, it should not be overwritten. I tried to get the '
FILE_ATTRIBUTE_READONLY' using MS API 'GetFileAttributes', but it didn't succeed. How Adobe marks the file as read-only for preview? Do I need to check some other attribute of the file?
Thanks!Divya - I have done it in the past following these documents. Please read it and try it it will work.
Please read it in the following order since both are a continuation documents for the same purpose (it also contains how to change colors of row dynamically but I didnt do that part I just did the read_only part as your requirement)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b?quicklink=index&overridelayout=true
thanks!
Jason PV -
How to count the no of digits entered in the NumericField & print the same
Hi!
How to count the no of digits entered in the Numberic Field and print the content of Numberic Field.
Thanks.Hi Venkat,
To check the number of digits, just convert it to a string and use the length() method. to get the number of characters. However, I am not getting your second point of printing the number?
Kindly explain in detail.
Regards,
Poojith MV -
How to count the number of lines dynamically,
In the below code am trying to read the lines which are selected using a check box, also am categorizing the contents depending on the follow up material.
after displaying one category contents am displaying a line
which also counts to a line in the internal table.
My question is how to count the number of lines(ULINE) displayed dynamically.
FORM GET_LINES .
DATA: LV_LINES TYPE I,
LV_TIMES TYPE I,
LV_TABIX TYPE SY-TABIX.
DESCRIBE TABLE IT_REC LINES LV_LINES.
DO LV_LINES TIMES.
LV_TIMES = SY-INDEX .
READ LINE LV_TIMES FIELD VALUE IT_REC-CHECK INTO GV_CHECK.
IF SY-SUBRC EQ 0 AND GV_CHECK IS NOT INITIAL.
LV_TABIX = LV_TIMES.
READ TABLE IT_REC INDEX LV_TABIX INTO GWA_UPDATE.
IF SY-SUBRC EQ 0.
APPEND GWA_UPDATE TO GT_UPDATE.
ENDIF.
ENDIF.
ENDDO.
ENDFORM. " GET_LINESIn the below code am trying to read the lines which are selected using a check box, also am categorizing the contents depending on the follow up material.
after displaying one category contents am displaying a line
which also counts to a line in the internal table.
My question is how to count the number of lines(ULINE) displayed dynamically.
FORM GET_LINES .
DATA: LV_LINES TYPE I,
LV_TIMES TYPE I,
LV_TABIX TYPE SY-TABIX.
DESCRIBE TABLE IT_REC LINES LV_LINES.
DO LV_LINES TIMES.
LV_TIMES = SY-INDEX .
READ LINE LV_TIMES FIELD VALUE IT_REC-CHECK INTO GV_CHECK.
IF SY-SUBRC EQ 0 AND GV_CHECK IS NOT INITIAL.
LV_TABIX = LV_TIMES.
READ TABLE IT_REC INDEX LV_TABIX INTO GWA_UPDATE.
IF SY-SUBRC EQ 0.
APPEND GWA_UPDATE TO GT_UPDATE.
ENDIF.
ENDIF.
ENDDO.
ENDFORM. " GET_LINES
The display function is:
FORM DISPLAY_DATA .
ULINE.
WRITE : /1 SY-VLINE, 'check',
10 SY-VLINE, 'Plant',
20 SY-VLINE, 'Material number',
50 SY-VLINE, 'Follow up material',
70 SY-VLINE, 'Safety stock',
100 SY-VLINE, 'Partc'.
ULINE.
LOOP AT IT_MARC.
MOVE: IT_MARC-WERKS TO IT_REC-WERKS,
IT_MARC-MATNR TO IT_REC-MATNR,
IT_MARC-NFMAT TO IT_REC-NFMAT,
IT_MARC-EISBE TO IT_REC-EISBE,
IT_MARC-PARTC TO IT_REC-PARTC .
APPEND IT_REC.
CLEAR IT_MARC.
ENDLOOP.
DATA: GV_TABIX TYPE SY-TABIX.
LOOP AT IT_REC.
GV_TABIX = SY-TABIX.
READ TABLE GT_TOTAL WITH KEY WERKS = IT_REC-WERKS
NFMAT = IT_REC-NFMAT.
IF SY-SUBRC EQ 0.
IT_REC-PARTC = GT_TOTAL-PARTC.
MODIFY IT_REC INDEX GV_TABIX TRANSPORTING PARTC.
ENDIF.
ENDLOOP.
LOOP AT IT_REC.
WRITE : /1 SY-VLINE, IT_REC-CHECK AS CHECKBOX,
10 SY-VLINE, IT_REC-WERKS,
20 SY-VLINE, IT_REC-MATNR,
50 SY-VLINE, IT_REC-NFMAT,
70 SY-VLINE, IT_REC-EISBE,
100 SY-VLINE, IT_REC-PARTC.
AT END OF NFMAT.
ULINE.
ENDAT.
ENDLOOP.
ULINE.
ENDFORM. " DISPLAY_DATA
Solved -
Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?
Hello,
this topic is still a problem for me, does anybody have an idea.
Just to show what's my problem:
Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
That works, the SH's are not shown anymore.
I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
All this can be done modification free by appends.
The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
But I have not found any way to do this modification free.
The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
But I want avoid this modification.
So, is there any way to do this without modifing any of the original SAP SH's ?
Helmut Fischer -
How to see the Table Names & Field Names by other than F1 help
Hi Experts
How to see the Table Names & Field Names by other than F1 help, & How to see the List of MM Table Names.
RgdsThe only option to see the active table/ field name is through F1 --> Technical Information. Apart from this, you can use any 3rd part application like GUIex (INbuilt in SAP ECC 6.0 ... can be activated by clicking on the tri-color button on the top right), but you need technical knowledge to understand the information. As far consolidated list of MM tables is concerned, SAP don;t provide you the same at one place, it experience and knowledge which help you in this regard. For your immediate reference MM tables are as under :
EBAN - Purchase Requisition
EBKN - Purchase Requisition Account Assignment
EBUB - Index for Stock Transport Requisitions for Materi
EINA - Purchasing Info Record: General Data
EINE - Purchasing Info Record: Purchasing Organization D
EIPA - Order Price History: Info Record
EKAB - Release Documentation
EKAN - Vendor Address: Purchasing Document
EKBE - History per Purchasing Document
EKBEH - Removed PO History Records
EKBZ - History per Purchasing Document: Delivery Costs
EKBZH - History per Purchasing Document: Delivery Costs
EKEH - Scheduling Agreement Release Documentation
EKEK - Header Data for Scheduling Agreement Releases
EKES - Vendor Confirmations
EKET - Scheduling Agreement Schedule Lines
EKETH - Scheduling Agreement Schedules: History Tables
EKKI - Purchasing Condition Index
EKKN - Account Assignment in Purchasing Document
EKKO - Purchasing Document Header
EKPA - Partner Roles in Purchasing
EKPB - "Material Provided" Item in Purchasing Document
EKPO - Purchasing Document Item
EKPV - Shipping-Specific Data on Stock Tfr. for Purch. D
EKRS - ERS Procedure: Goods (Merchandise) Movements to b
EKUB - Index for Stock Transport Orders for Material
EORD - Purchasing Source List
EQUK - Quota File: Header -
How to count the number of wins?
I have a tic tac toe simulator that simulates a game of tic tac toe (obviously). I press the 'play' button, and 1 random X and O is placed in 9 of the labels. Then the application says if X or O wins, or if the game was a tie/no winner. So,
what I want to do is when I click the 'exit' button, I want a message box telling the user how many times X won, O won, and how many ties there were. I am not too sure how to count the number of wins.
-ThanksThanks for the reply. I could be wrong, but I do not think that is exactly what I am looking for. Here is the code that I have that determines the winner:
switch (checkWinner())
case 'T':
winnerLabel.Text = "It was a tie!";
break;
case 'O':
winnerLabel.Text = "O Wins!";
break;
case 'X':
winnerLabel.Text = "X Wins!";
break;
private char checkWinner()
char WinnerChar = ' ';
int winning_line = 0;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[1]) && GameBoardCellChar[0].Equals(GameBoardCellChar[2]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[3].Equals(GameBoardCellChar[4]) && GameBoardCellChar[3].Equals(GameBoardCellChar[5]))
WinnerChar = GameBoardCellChar[3];
winning_line++;
if (GameBoardCellChar[6].Equals(GameBoardCellChar[7]) && GameBoardCellChar[6].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[6];
winning_line++;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[3]) && GameBoardCellChar[0].Equals(GameBoardCellChar[6]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[1].Equals(GameBoardCellChar[4]) && GameBoardCellChar[1].Equals(GameBoardCellChar[7]))
WinnerChar = GameBoardCellChar[1];
winning_line++;
if (GameBoardCellChar[2].Equals(GameBoardCellChar[5]) && GameBoardCellChar[2].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[2];
winning_line++;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[4]) && GameBoardCellChar[0].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[2].Equals(GameBoardCellChar[4]) && GameBoardCellChar[2].Equals(GameBoardCellChar[6]))
WinnerChar = GameBoardCellChar[2];
winning_line++;
if (winning_line == 0 || winning_line > 1)
WinnerChar = 'T';
return WinnerChar;
Do I have to include something extra in here to get the count or no?
The code I posted is the coding in my play button.
Maybe you are looking for
-
Question When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?
-
My hard disk in my 3 year old 27" iMac has been chattering lot - essentially all the time - even though nothing seems to be running. I downloaded SMART Utility for Mac and ran it it. It says my hard drive is failing. It shows 61 Reallocated Bad
-
Admin tool upload the repositroy file by odbc
is there anyone using admin tool to upload the repository file by odbc to BI server, I had problem working on odbc configuration, that always showing " can not connect to BI server" message -thanks
-
ASP pages and Oracle ODBC Driver
I have a number of ASP pages that need to be updated to connect to Oracle using the ORACLE ODBC driver. Currently, these pages connect using the Microsoft ODBC driver for Oracle. I do not know of all the details yet as I havent seen the pages or netw
-
Release strategy in sales order is required before MRP run
Hi Experts, My requirement is Release strategy in sales order is required before MRP run. My client is doing the following process: 1) Creation of Sale order (MTO). Ex: User creates 10 sale orders per day. 2) MD04- Stock Requirement List. All 10 Sal