Urgent help please - What files needed to compile servlets

I am trying to compile some servlets but can't. I recently reformatted and forgot how I had configured Tomcat previously.
What files do I need to compile servlets, and where do I have to save them etc.
Thanks

u will require jsdk.jar..
put this in classpath and then compile ..it will surely compile
and for compiling ...there is no configuration reqd in tomcat

Similar Messages

Need Urgent help please? I need to restore from a previous iphone backup.

Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
I'll be anxiously awaiting any help you can give!
Thank you!!

rwmac22 wrote:
Hopt and OneOrangeTree, Thank you both very much for replying!!
It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc.

Urgent Help With Connections File Needed Please

Hello All!
I am getting the following error when I attempt to test my
live site. I am testing database connectivity within my site that
is hosted by GoDaddy. All pages are ASP and the database is stored
in the root directory in GoDaddy's folder called "access_db". The
folder has read/write access.
Here is the error:
Microsoft JET Database Engine error '80040e4d'
Cannot start your application. The workgroup information file
is missing or opened exclusively by another user.
/sitename/requestquote/index.asp, line 130
Here is the code from the connections file:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
Dim MM_connNAME_STRING
MM_connNAME_STRING =
"Provider=Microsoft.Jet.OLEDB.4.0;DataSource=username\access_db\filename.mdb;UserId=usern ame;Password=password;"
%>
The error above refrences "/sitename/requestquote/index.asp,
line 130", and here is the code:
rs_quote.ActiveConnection = MM_connNAME_STRING
Please help.
Thanks - Matt

Sorry Tim? This is Dave. Did you read what said? I'm not
Matt.
Dave
"TC2112" <[email protected]> wrote in message
news:[email protected]...
> It could be, you'd have to check in the control panel to
make sure
> permissions are set to read and write.
> Have you tried changing the path in your connection
string to the GoDaddy
> path and uploading the file?
> The info I posted tells you how to find out what the
path on GoDaddy is.
>
> Tim
>
>
> "Baxter" <baxter(RemoveThe :-)@gtlakes.com> wrote
in message
> news:[email protected]...
> > Tim,
> > Very good reply! I have no experience with GD other
than the complaints
I
> > have read here about connections to databases etc.
I think that if his
> > connection test is ok that it has to be a
permissions issue? What do you
> > think?
> > Dave
> > "TC2112" <[email protected]> wrote in message
> > news:[email protected]...
> >> Hello,
> >>
> >> Sorry if some of this is repetitive in respect
to what others have
> >> advised
> >> in this thread.
> >> It's an answer I gave someone with similar
problems a while ago.
> >> It does answer your question about the
successful path on your local
> > server
> >> being different than the path on GDs server.
> >> There are also instructions on how to find the
path on GD's server if
> > needed
> >> for DNS-Less connection.
> >>
> >>
> >> Option 1:
> >> You can try using a map path function like this
in your connection
> >> string:
> >> access_db is the folder the database is in and
mydatabase.mdb is the
> > access
> >> file.
> >> Substitute your names.
> >>
> >> STRING = "Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" &
> >> Server.MapPath("access_db") &
"\mydatabase.mdb;User Id=admin;Password="
> >>
> >> -or-
> >>
> >> Option 2:
> >> You could try an OLEDB DSN-Less connection
instead of using a DSN. It's
> > not
> >> hard to do.
> >>
> >> Step 1 is to figure out the location of the
root directory on the
host's
> >> server..That's very easy to do yourself.
> >>
> >> Just make an asp page (I named mine
"findit.asp"), and put the
following
> >> code between the <body> tags, like so:
> >> <body>
> >> <%
> >> Response.Write("The location of this page
is: ")
> >>
Response.Write(Request.ServerVariables("PATH_TRANSLATED") &
" ")
> >> Response.Write("The location of my root
directory is: ")
> >> Response.Write(Server.MapPath("\"))
> >> Response.Write Path
> >> %>
> >> </body>
> >>
> >>
> >> Upload it to the same location as your site's
home page.
> >> Once your new asp page is uploaded, just
navigate to that page in your
> >> browser.
> >>
> >> For a site on GD the "findit.asp" page displays
something like this:
> >>
> >> The location of this page is:
> >> d:\hosting\mysite\findit.asp
> >> The location of my root directory is:
> >> d:\hosting\mysite
> >>
> >> Now that you know the root directory location
on their server, you can
> >> figure out the path to your database.
> >> Let's say that the folder your database is in
is named _private, and
it
> >> happens to be in the root
> >> directory along with your home page.
> >>
> >> Next, just add the database folder name
(_private) and the database
> >> inside's name (mydatabase.mdb) to the root
directory location:
> >>
> >> d:hosting\mysite\_private\mydatabase.mdb
> >>
> >> That's your Data Source path.
> >>
> >> The connection string would look something like
this:
> >>
> >> = "Provider=Microsoft.Jet.OLEDB.4.0;Data
> >>
Source=d:hosting\mysite\_private\mydatabase.mdb;User
ID=;Password=;"
> >>
> >> (the code above may appear wrapped (two lines)
in the forum/ng but it's
> > one
> >> line with no return within)
> >>
> >> IMPORTANT: If you are using a local testing
server, make a copy of your
> >> connection asp page as a backup.
> >> The reason? The connection information you are
going to put in this
file
> >> will only work on the host's server.
> >> Once you upload the new connection.asp page
with the changes for the
> >> host,
> >> you'll need to change your local copy back to
your local connection so
it
> >> will work on
> >> your local testing server.
> >>
> >> Upload to server.
> >>
> >> Please note: From now on, when you upload (or
"put" if you're using DW)
> >> files that refer to your connection asp page
you're going to get a
> >> warning
> >> that your connection asp on the host is
different than your local copy.
> >> Always say "No" to updating it, or you'll
replace the GD DSN-Less
> > connection
> >> with your local one.
> >>
> >>
> >> Did you set the appropriate read/write
permissions on the
> > directory(folder)
> >> your database is in?
> >> You can do that in GD's control panel.
Hosting> Select your site >
Manage
> > to
> >> open it.
> >>
> >> I hope this helps.
> >>
> >> For what it's worth, I only use GD for domain
names now.
> >> I had numerous problems with some sites hosted
there, switched them to
> >> HostMySite and haven't had any.
> >>
> >> Take care,
> >> Tim
> >>
> >>
> >>
> >>
> >>
> >> "Baxter" <baxter(RemoveThe
:-)@gtlakes.com> wrote in message
> >> news:[email protected]...
> >> > Baxter - I get "Connection was Made
Successfully" if connection to
the
> >> > database was made Successfully not sure
what's going on here? When
you
> >> > look
> >> > at your site files in Dreamwerer on the
server is there a folder
named
> >> > access_db? If so is your data base in that
folder? The database needs
> >> > permissions set to read and write to that
file. Have you checked
> >> > permissions
> >> > on the site? does GD give you a control
panel so that you can set the
> >> > permissions your self? I have never used
GD but have seen where
people
> >> > have
> >> > had lots of problems with them when using
a scripting language. I
don't
> >> > know
> >> > what else it could be at this point.
> >> > Dave
> >> > "mtrueblood"
<[email protected]> wrote in message
> >> > news:[email protected]...
> >> >> Baxter - I get "Connection was Made
Successfully" with the
credentials
> >> >> you
> >> > gave
> >> >> me. My site works just fine on my
local machine with
> > access_trueblood.dsn
> >> > (it
> >> >> also worked with the dsn I initally
created for the site). All pages
> >> > display
> >> >> and I get no errors. I think where the
issue may be, now I am
guessing
> >> > here, is
> >> >> that my connection refrences a
database located in the folder
> >> >>
C:\Users\Administrator\Websites\Sitename\access_db, but once I
upload
> > my
> >> > site,
> >> >> the database still sits in access_db,
but the root folder possibly
has
> >> > changed
> >> >> (maybe causing the connection to
fail).
> >> >>
> >> >> Dooza - I don't understand how I can
use "c:myDsnFile.dsn", when
once
> > I
> >> > upload
> >> >> my site, "c:myDsnFile.dsn" would then
not be the location of my dsn.
> >> >> "c:myDsnFile.dsn" refrences a file on
my computer. I am using an
> >> >> online
> >> > hosting
> >> >> company. Am I not understanding you
correctly? See note above. I did
> > use
> >> > your
> >> >> information and got the following
browser error:
> >> >>
> >> >> Microsoft OLE DB Provider for ODBC
Drivers error '80004005'
> >> >> General error: Invalid file dsn ''
> >> >> /sitename/contactus/index.asp, line
130
> >> >>
> >> >> line 130 -
rs_contactus.ActiveConnection = MM_connTrueblood_STRING
> >> >>
> >> >> I am researching on how to do a
dsn-less connection, unless I can
get
> >> > this
> >> >> figured out.
> >> >>
> >> >> Thanks - Matt
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an er

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?

its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed

Hi! I cant conect The face time betwen my iPad ,iPod and iPhone, please help me,what i need for this issue?

Hi! I cant conect The face time betwen my iPad ,iPod and iPhone, please help me,what i need for this issue?

What is it doing when you try to facetime? also if you are using the same apple Id/email on each device, it wont work.

What files need to be cleaned periodically in Oracle Apps R12 ?

Hi
In Oracle Database, periodically we clean alertlog,trace files from bdump,udump,cdump directories and at AIX OS level, /usr/tmp, /var/tmp, /root,we clean .tmp,.log files. Similarly,what files needs to cleaned from Oracle Apps R12 directories periodically to control the harddisk usage?
Any help is highly appreciated !
Thanks

Ateeq,
Please be careful when following the steps in the note referenced above especially when cleaning the $ORACLE_HOME/lib directory, otherwise your instance will not function properly. I believe purging the log files at the application/database tiers is fair enough to reclaim space and should be done on periodic basis.
What log files to clean up after shut down of Vision R12.0.4
Re: What log files to clean up after shut down of Vision R12.0.4
Purging Log files
Purging Log files

b font color ='red' Java JDBC and Oracle DB URGENT HELP PLEASE /font /b

Hello, I am a newbie. I'm very interested in Java in relation to JDBC, Oracle and SAP.I am trying to connect to an Oracle DB and I have problems to display the output on the consule in my application. What am I doing wrong here . Please help me. This is my code: Please Explain
import java.sql.*;
import java.sql.DriverManager;
import java.sql.Connection;
public class SqlConnection {
 public static void main(String[] args) {
 Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
 Connection con = DriverManager.getConnection
 ("jdbc:orcle:thin:@34.218.5.3:1521:ruka","data","data"); //making the connection.
 Statement stmt = con.createStatement ();// Sending a query to the database
 ResultSet rs = stmt.executeQuery("SELECT man,jean,test,kok FROM sa_kostl");
 while (rs.next()) {
 String man = rs.getString("1");
 String jean = rs.getString("2");
 String test = rs.getString("3");
 String kok = rs.getString("4");
 System.out.println( man, jean, test,kok );//here where my the
 //compiler gives me errors
 stmt.close();
 con.close();
}

Java JDBC and Oracle DB URGENT HELP PLEASEToo bad your attempt at getting your subject to have greater attention failed :p

Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12. Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10? If so what specific error are you receiving?

Load XML in intranet ? urgent help please...

Dear friends, I need urgent help: I have a CAYIN screen (which lets me display evetns, etc) and gives me the option of loading/displaying a FLASH (SWF) file, well, I need this SWF to load some XML data ("texto.xml") but seems that when the CAYIN program which executes flash, does not allow the SWF to find the XML in the same folder...
Then I tried many ways to load the XML file with no success till now. Some tries are :
obj_xml.load("\\192.168.0.100\media\texto.xml")
obj_xml.load("\media\texto.xml")
obj_xml.load("texto.xml")
obj_xml.load("../media/texto.xml")
obj_xml.load("\\media\texto.xml")
obj_xml.load("file:\\192.168.0.100\media\texto.xml")
obj_xml.load("..\\192.168.0.100\media\texto.xml")
I guess I am writting something wrong or forgetting something. Would anyone please help me ? because these files are in an internal server "192.168.0.100" (intranet).
Urgent help please, thanks in advance,

if the swf is in a directory with subdirectory media which contains texto.xml, use:
obj_xml.load("media/texto.xml")

Help please what can i do i have a apple id that i have had scince i was in year 6 i have recently been unable to buy music or apps unless they are free because it asks for these security questions that i have no idea what the awnser is

help please what can i do i have a apple id that i have had scince i was in year 6 i have recently been unable to buy music or apps unless they are free because it asks for these security questions that i have no idea what the awnser is help me please

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do?

The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do? Please I need your help.

The damage has been done then
Take it to Apple and pay for a replacement
Here in the States a replacement cost $229
Allan

My memory is full of "other" what files need to be deleted to free up more memory?

My memory is full of "other" what files need to be deleted to free up more memory?

https://discussions.apple.com/docs/DOC-5142
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.4

What files need to be on the SD card??

I had to erase (moved them to my hard disk) the original files on the SD card to update the OS and get my 500 working, which I finally got to work. I then installed maps from the cd to the SD card and copied back the files that were originally on the SD card. Now the unit complains that it can't find an SD with the maps. Can anybody tell me what files need to be in what folders on the SD card?? TIA!!!

I'm having the exact same problem. Also, because there is an apparent problem with the updater now locking up and crashing, it's even more of a problem. Anyone have a fix on either the 500 not finding the navigator program on the SD because of erasure or the uploader crash issue?
Thanks

What files need to be deleted to start fresh with iCal?

Friends:
What files need to be deleted from places like the library to start with a fresh blank copy of iCal?
Thanks amigos!
Migs

Migs,
Have you tried using the iCal user interface to delete all iCal data?
You can do this by creating a new calendar, and naming the calendar. Name it "Test" for example. Then delete all of the other calendars that exist in the "Calendars" sources pane.
Quit iCal, and remove the com.apple.ical.plist file from your Macintosh HD/Users/yourusername/Library/Preferences folder. Also remove the Calendar Cache file from the Macintosh HD/Users/yourusername/Library/Calendars folder.
Then log out/in or restart, and the only calendar remaining should be the blank "Test" calendar.
;~)

Urgent help please - What files needed to compile servlets

Similar Messages

Maybe you are looking for