URGENT! I need help on LDAP - Finding deleted users Attribute "sAMAccount"

Hi,
I am trying to get deleted users from Active Directory after a certain interval. Every time only the differences in the result will be shown. Also I need to get the value of the specific attribute called "sAMAccount" every time for each user(in the result).
I am using polling here.
*if (localCookie == null) {*
                    // Specify the DirSync Control
                    *Control[] ctls = new Control[] { new DirSyncControl() };*
                    ctx.setRequestControls(ctls);
               *} else {*
                    // Specify the DirSync Control with cookie
                    *Control[] ctls = { new DirSyncControl(1, Integer.MAX_VALUE, localCookie, true) };*
                    ctx.setRequestControls(ctls);
rspCtls = ctx.getResponseControls();
*if (rspCtls != null) {*
               *for (int i = 0; i < rspCtls.length; i++) {*
                    *if (rspCtls[i] instanceof DirSyncResponseControl) {*
                         *DirSyncResponseControl rspCtl = (DirSyncResponseControl) rspCtls;*
                         localCookie = rspCtl.getCookie();
The typical problem I am facing here is 2nd iteration onwards the result is not fetching the attribute "sAMAccount".
Please suggest the possible reason and solution.

String searchBase = "DC=test,DC=com";
String searchString = "(&(objectClass=user)(|(givenName=*)(isDeleted=TRUE)))";
String url = "ldap://jbaitest.test.com:389";
String initCntxtFact = "com.sun.jndi.ldap.LdapCtxFactory";
String login= "CN=Administrator,CN=Users,DC=TEST,DC=COM";
String passwd = "welcome@1";
byte[] localCookie = AdPolling.getCookie();
try {
    Hashtable<String, String> env = new Hashtable<String, String>();
    env.put(Context.INITIAL_CONTEXT_FACTORY, initCntxtFact);
    env.put(Context.SECURITY_AUTHENTICATION, AdConstant.SECURITY_AUTH_TYPE_SIMPLE);
    env.put(Context.SECURITY_PRINCIPAL, login);
    env.put(Context.SECURITY_CREDENTIALS, passwd);
    env.put(Context.PROVIDER_URL, url);
    LdapContext ctx = new InitialLdapContext(env, null);
    SearchControls searchCtls = new SearchControls();
    String returnedAtts[] = null;
    searchCtls.setReturningAttributes(returnedAtts);
    searchCtls.setReturningObjFlag(true);
    searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
    if (localCookie == null) {
        Control[] ctls = new Control[] { new DirSyncControl() };
        ctx.setRequestControls(ctls);
    } else {
     // Specify the DirSync Control with cookie
     Control[] ctls = { new DirSyncControl(1, Integer.MAX_VALUE, localCookie, true) };
     ctx.setRequestControls(ctls);
    NamingEnumeration enumSearchResult = ctx.search(searchBase, searchString, searchCtls);
    AdRestClientConnector adRestCon = populateUsers(enumSearchResult); // Method to get the different  attribute values
    rspCtls = ctx.getResponseControls();
    if (rspCtls != null) {
     for (int i = 0; i < rspCtls.length; i++) {
         if (rspCtls[i] instanceof DirSyncResponseControl) {
          DirSyncResponseControl rspCtl = (DirSyncResponseControl) rspCtls;
          localCookie = rspCtl.getCookie();
AdPolling.setCookie(localCookie);
} catch (NamingException e) {
     log.error(AdConstant.ERROR_SEARCHING_DIR_PROBLEM + e);
} catch (Exception e) {
     log.error(AdConstant.ERROR_SEARCHING_DIR_PROBLEM + e);

Similar Messages

  • I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

    I actually need help but cannot find the answer.
    Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

  • HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

    I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
    "The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

    Try Perian.
    http://perian.org/

  • Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.

    also say explorer not reading SWF files and I have to reload them? Not sure what that is either,
    Thanks
    Jim

    Hi Nancy
    Trying to update my site got to make some changes.  Do you work on sites via remote? I am on Cloud.
    : Nancy O. 
    Sent: Monday, September 01, 2014 3:47 PM
    To: James Neidner
    Subject:  Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
    Need help " Can't find a valid editor for this file extension" not sure why I am getting and this or what to do.
    created by Nancy O. <https://forums.adobe.com/people/Nancy+O.>  in Dreamweaver support forum - View the full discussion <https://forums.adobe.com/message/6692200#6692200>

  • Need help, MMC tree got deleted, very urgent.

    Hi,
    My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
    1) i have uncared the sapmmc.sar from   Kernal\NT\I386\MMC\sapmmc.sar file
    2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
    3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
                        SID: DEV
                        NR: 00
                        StartProfile:  (entire start profile path given)
                        user: devadm
                        passwd; (given)
    - but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
    - no go in both the cases.
    Please need help very urgent.
    Regards,
    Satish.

    siva,
    I am getting same error since 2 days
    SID: DEV
    NR: 00
    Start Profile: (entire start profile path)
    User: <hostname>/devadm
    passwd: ****
    Error:
    cannot install service
    create service failed:421
    The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
    Edited by: satish c on Jun 4, 2008 11:12 AM

  • It's very urgent i need help in smartforms

    I need your help for smartforms. I created a smartforms in SD for getting quotations. My problem is that when I run da report it is not executing & if i run smartforms it is giving error in da functional module as - In program "/1BCDWB/SAPLSF00000003 ", the following syntax error occurred:
    "The data object "I_HEADER" does not have a component called "BNAME"."
    and more over i need a code for my my user tht when i execute this form before displaying print or printpreview i should give a popup window asking da user whether to display item code or not then i should get da print or printpreview. when the user needs item code he can print as well if he don't it should not display. this da code i return in se38 editor. In smartforms i wrote code for getting company address etc. I did not write anything in initialization.
    source code
    *& Application      :  Sales & Distribution (SD)
    *& Description      :  This report will Print Sales Order Confirmation Using Smartform
    *& Transaction Code :
    *& Area Menu Code   :  ZSD
    *& Layout           :  ZSDORDERCONF
    *& Dev.Complited On :
    REPORT  ZSDR0004.
    INCLUDE: ZSDI0003.
          S U B R O U T I N E S                                         *
    FORM ENTRY USING RETURN_CODE TYPE I
                     US_SCREEN TYPE C.
      CLEAR RETCODE.
      XSCREEN = US_SCREEN.
      PERFORM PROCESSING.
      IF RETCODE NE 0.
        RETURN_CODE = 1.
      ELSE.
        RETURN_CODE = 0.
      ENDIF.
    ENDFORM.                    "ENTRY
          FORM PROCESSING                                               *
    FORM PROCESSING.
      PERFORM GET_DATA.
      CHECK RETCODE = 0.
      PERFORM PRINT_DATA.
      CHECK RETCODE = 0.
    ENDFORM.                    "PROCESSING
          FORM CHECK_REPEAT                                             *
          A text is printed, if it is a repeat print for the document.  *
    FORM CHECK_REPEAT.
      CLEAR REPEAT.
      SELECT * INTO *NAST FROM NAST WHERE KAPPL = NAST-KAPPL
                                    AND   OBJKY = NAST-OBJKY
                                    AND   KSCHL = NAST-KSCHL
                                    AND   SPRAS = NAST-SPRAS
                                    AND   PARNR = NAST-PARNR
                                    AND   PARVW = NAST-PARVW
                                    AND   NACHA BETWEEN '1' AND '4'.
        CHECK *NAST-VSTAT = '1'.
        REPEAT = 'X'.
        EXIT.
      ENDSELECT.
    ENDFORM.                    "CHECK_REPEAT
          FORM GET_DATA                                                 *
          General provision of data for the form                        *
    FORM GET_DATA.
      DATA: US_VEDA_VBELN     LIKE VEDA-VBELN.
      DATA: US_VEDA_POSNR_LOW LIKE VEDA-VPOSN.
      DATA: DA_MESS LIKE VBFS OCCURS 0 WITH HEADER LINE.
      DATA: DA_SUBRC LIKE SY-SUBRC,
            DA_DRAGR LIKE TVAG-DRAGR.
      DATA: DA_GANF(1) TYPE C,      "Print flag for billing correction
            DA_LANF(1) TYPE C.      "Print flag for billing correction
      CALL FUNCTION 'RV_PRICE_PRINT_GET_MODE'
        IMPORTING
          E_PRINT_MODE = PRICE_PRINT_MODE.
      IF PRICE_PRINT_MODE EQ CHARA.
        CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
          TABLES
            TKOMV = TKOMV.
      ENDIF.
      CLEAR KOMK.
      CLEAR KOMP.
      VBCO3-MANDT = SY-MANDT.
      VBCO3-SPRAS = NAST-SPRAS.
      VBCO3-VBELN = NAST-OBJKY.
      VBCO3-KUNDE = NAST-PARNR.
      VBCO3-PARVW = NAST-PARVW.
      CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
        EXPORTING
          COMWA                       = VBCO3
        IMPORTING
          KOPF                        = VBDKA
        TABLES
          POS                         = TVBDPA
          MESS                        = DA_MESS
        EXCEPTIONS
          FEHLER_BEI_DATENBESCHAFFUNG = 1.
      IF SY-SUBRC NE 0.
        PERFORM PROTOCOL_UPDATE.
        RETCODE = 1.
        EXIT.
      ELSE.
        LOOP AT DA_MESS.
          SY-MSGID = DA_MESS-MSGID.
          SY-MSGNO = DA_MESS-MSGNO.
          SY-MSGTY = DA_MESS-MSGTY.
          SY-MSGV1 = DA_MESS-MSGV1.
          SY-MSGV2 = DA_MESS-MSGV2.
          SY-MSGV3 = DA_MESS-MSGV3.
          SY-MSGV4 = DA_MESS-MSGV4.
          PERFORM PROTOCOL_UPDATE.
        ENDLOOP.
      ENDIF.
    *Get Header Data In I_HEADER Table.
      SELECT VBAKVBELN VBAKAUDAT VBAKKUNNR VBAKWAERK
             VBAKVKORG VBAKANGDT VBAKBNDDT VBAKVBTYP
             VBAKKNUMV VBAKKALSM VBAKNETWR VBAKVKBUR
             VBAKBNAME VBKDBSTKD VBKDBSTDK VBKDINCO1
             VBKDINCO2 VBKDZTERM
             INTO CORRESPONDING FIELDS OF TABLE I_HEADER
             FROM VBAK
             JOIN VBKD ON VBKDVBELN = VBAKVBELN
             WHERE VBAK~VBELN = VBCO3-VBELN.
    **Get Address Number For Company
      IF NOT I_HEADER[] IS INITIAL.
        READ TABLE I_HEADER INDEX 1.
        SELECT SINGLE BUKRS ADRNR INTO (COMPCD, ADDCOMP)
             FROM TVKO
             WHERE VKORG = I_HEADER-VKORG.
      ENDIF.
    fill address key --> necessary for emails
      ADDR_KEY-ADDRNUMBER = VBDKA-ADRNR.
      ADDR_KEY-PERSNUMBER = VBDKA-ADRNP.
      ADDR_KEY-ADDR_TYPE  = VBDKA-ADDRESS_TYPE.
    Fetch servicecontract-data and notice-data for head and position.
      US_VEDA_VBELN     = VBDKA-VBELN.
      US_VEDA_POSNR_LOW = POSNR_LOW.
      CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
        EXPORTING
          I_DOCUMENT_NUMBER = US_VEDA_VBELN
          I_LANGUAGE        = SY-LANGU
          I_POSNR_LOW       = US_VEDA_POSNR_LOW
        TABLES
          PRINT_DATA_POS    = TKOMSERVP
          PRINT_DATA_HEAD   = TKOMSERVH
          PRINT_NOTICE_POS  = TKOMSERVPN
          PRINT_NOTICE_HEAD = TKOMSERVHN.
      PERFORM GET_CONTROLL_DATA.
      PERFORM SENDER.
      PERFORM CHECK_REPEAT.
      LOOP AT TVBDPA.
        VBDPA = TVBDPA.
        IF VBDPA-DRAGR EQ SPACE.           "Print rejected item?
          IF VBDPA-POSNR_NEU NE SPACE.     "Item
            PERFORM GET_ITEM_SERIALS.
            PERFORM GET_ITEM_CHARACTERISTICS.
            PERFORM GET_ITEM_BILLING_SCHEDULES.
            PERFORM GET_ITEM_PRICES.
            PERFORM GET_ITEM_ADDIS.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    "GET_DATA
          FORM GET_ITEM_BILLING_SCHEDULES                               *
          In this routine the billing schedules are fetched from the    *
          database.                                                     *
    FORM GET_ITEM_BILLING_SCHEDULES.
      REFRESH TFPLTDR.
      CHECK NOT VBDPA-FPLNR IS INITIAL.
      CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
        EXPORTING
          I_FPLNR    = VBDPA-FPLNR
          I_LANGUAGE = NAST-SPRAS
          I_VBELN    = VBDKA-VBELN
        TABLES
          ZFPLTDR    = TFPLTDR.
    ENDFORM.                    "GET_ITEM_BILLING_SCHEDULES
    *&      FORM  GET_ITEM_ADDIS
          Additionals data are fetched from database
    FORM GET_ITEM_ADDIS.
      CLEAR: TADDI_PRINT.
      CALL FUNCTION 'WTAD_ADDIS_IN_SO_PRINT'
           EXPORTING
                FI_VBELN              = VBDKA-VBELN
                FI_POSNR              = VBDPA-POSNR
              FI_LANGUAGE           = SY-LANGU
           TABLES
                FET_ADDIS_IN_SO_PRINT = TADDI_PRINT
           EXCEPTIONS
                ADDIS_NOT_ACTIVE      = 1
                NO_ADDIS_FOR_SO_ITEM  = 2
                OTHERS                = 3.
    ENDFORM.                               " GET_ITEM_ADDIS
          FORM GET_ITEM_CHARACTERISTICS                                 *
          In this routine the configuration data item is fetched from   *
          the database.                                                 *
    FORM GET_ITEM_CHARACTERISTICS.
      DATA DA_T_CABN LIKE CABN OCCURS 10 WITH HEADER LINE.
      DATA: BEGIN OF DA_KEY,
              MANDT LIKE CABN-MANDT,
              ATINN LIKE CABN-ATINN,
            END   OF DA_KEY.
      REFRESH TKOMCON.
      CHECK NOT VBDPA-CUOBJ IS INITIAL AND
                VBDPA-ATTYP NE VAR_TYP.
      CALL FUNCTION 'VC_I_GET_CONFIGURATION'
        EXPORTING
          INSTANCE      = VBDPA-CUOBJ
          LANGUAGE      = NAST-SPRAS
          PRINT_SALES   = CHARX
        TABLES
          CONFIGURATION = TKOMCON
        EXCEPTIONS
          OTHERS        = 4.
      RANGES : DA_IN_CABN FOR DA_T_CABN-ATINN.
    Beschreibung der Merkmale wegen Objektmerkmalen auf sdcom-vkond holen
      CLEAR DA_IN_CABN. REFRESH DA_IN_CABN.
      LOOP AT TKOMCON.
        DA_IN_CABN-OPTION = 'EQ'.
        DA_IN_CABN-SIGN   = 'I'.
        DA_IN_CABN-LOW    = TKOMCON-ATINN.
        APPEND DA_IN_CABN.
      ENDLOOP.
      CLEAR DA_T_CABN. REFRESH DA_T_CABN.
      CALL FUNCTION 'CLSE_SELECT_CABN'
       EXPORTING
            KEY_DATE                     = SY-DATUM
            BYPASSING_BUFFER             = ' '
            WITH_PREPARED_PATTERN        = ' '
            I_AENNR                      = ' '
       IMPORTING
            AMBIGUOUS_OBJ_CHARACTERISTIC =
         TABLES
              IN_CABN                      = DA_IN_CABN
              T_CABN                       = DA_T_CABN
         EXCEPTIONS
              NO_ENTRY_FOUND               = 1
              OTHERS                       = 2.
    Preisfindungsmerkmale / Merkmale auf VCSD_UPDATE herausnehmen
      SORT DA_T_CABN.
      LOOP AT TKOMCON.
        DA_KEY-MANDT = SY-MANDT.
        DA_KEY-ATINN = TKOMCON-ATINN.
        READ TABLE DA_T_CABN WITH KEY DA_KEY BINARY SEARCH.
        IF SY-SUBRC <> 0 OR
           ( ( DA_T_CABN-ATTAB = 'SDCOM' AND
              DA_T_CABN-ATFEL = 'VKOND'       ) OR
            ( DA_T_CABN-ATTAB = 'VCSD_UPDATE' ) ) .
          DELETE TKOMCON.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    "GET_ITEM_CHARACTERISTICS
          FORM GET_ITEM_PRICES                                          *
          In this routine the price data for the item is fetched from   *
          the database.                                                 *
    FORM GET_ITEM_PRICES.
      CLEAR: KOMP,
             TKOMV.
      IF KOMK-KNUMV NE VBDKA-KNUMV OR
         KOMK-KNUMV IS INITIAL.
        CLEAR KOMK.
        KOMK-MANDT = SY-MANDT.
        KOMK-KALSM = VBDKA-KALSM.
        KOMK-KAPPL = PR_KAPPL.
        KOMK-WAERK = VBDKA-WAERK.
        KOMK-KNUMV = VBDKA-KNUMV.
        KOMK-KNUMA = VBDKA-KNUMA.
        KOMK-VBTYP = VBDKA-VBTYP.
        KOMK-LAND1 = VBDKA-LAND1.
        KOMK-VKORG = VBDKA-VKORG.
        KOMK-VTWEG = VBDKA-VTWEG.
        KOMK-SPART = VBDKA-SPART.
        KOMK-BUKRS = VBDKA-BUKRS_VF.
        KOMK-HWAER = VBDKA-WAERS.
        KOMK-PRSDT = VBDKA-ERDAT.
        KOMK-KURST = VBDKA-KURST.
        KOMK-KURRF = VBDKA-KURRF.
        KOMK-KURRF_DAT = VBDKA-KURRF_DAT.
      ENDIF.
      KOMP-KPOSN = VBDPA-POSNR.
      KOMP-KURSK = VBDPA-KURSK.
      KOMP-KURSK_DAT = VBDPA-KURSK_DAT.
      if vbdka-vbtyp ca 'HKNOT6'.
        if vbdpa-shkzg ca ' A'.
          komp-shkzg = 'X'.
        endif.
      else.
        if vbdpa-shkzg ca 'BX'.
          komp-shkzg = 'X'.
        endif.
      endif.
      IF PRICE_PRINT_MODE EQ CHARA.
        CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
          EXPORTING
            COMM_HEAD_I = KOMK
            COMM_ITEM_I = KOMP
            LANGUAGE    = NAST-SPRAS
          IMPORTING
            COMM_HEAD_E = KOMK
            COMM_ITEM_E = KOMP
          TABLES
            TKOMV       = TKOMV
            TKOMVD      = TKOMVD.
      ELSE.
        CALL FUNCTION 'RV_PRICE_PRINT_ITEM_BUFFER'
          EXPORTING
            COMM_HEAD_I = KOMK
            COMM_ITEM_I = KOMP
            LANGUAGE    = NAST-SPRAS
          IMPORTING
            COMM_HEAD_E = KOMK
            COMM_ITEM_E = KOMP
          TABLES
            TKOMV       = TKOMV
            TKOMVD      = TKOMVD.
      ENDIF.
    ENDFORM.                    "GET_ITEM_PRICES
          FORM GET_HEADER_PRICES                                        *
          In this routine the price data for the header is fetched from *
          the database.                                                 *
    FORM GET_HEADER_PRICES.
      LOOP AT TVBDPA.
        CALL FUNCTION 'SD_TAX_CODE_MAINTAIN'
          EXPORTING
            KEY_KNUMV           = VBDKA-KNUMV
            KEY_KPOSN           = TVBDPA-POSNR
            I_APPLICATION       = ' '
            I_PRICING_PROCEDURE = VBDKA-KALSM
          TABLES
            XKOMV               = TKOMV.
      ENDLOOP.
      IF PRICE_PRINT_MODE EQ CHARA.
        CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
          EXPORTING
            COMM_HEAD_I = KOMK
            LANGUAGE    = NAST-SPRAS
          IMPORTING
            COMM_HEAD_E = KOMK
          TABLES
            TKOMV       = TKOMV
            TKOMVD      = TKOMVD.
      ELSE.
        CALL FUNCTION 'RV_PRICE_PRINT_HEAD_BUFFER'
          EXPORTING
            COMM_HEAD_I = KOMK
            LANGUAGE    = NAST-SPRAS
          IMPORTING
            COMM_HEAD_E = KOMK
          TABLES
            TKOMV       = TKOMV
            TKOMVD      = TKOMVD.
      ENDIF.
    ENDFORM.                    "GET_HEADER_PRICES
          FORM PRINT_DATA                                               *
          Print Quotation                                               *
    FORM PRINT_DATA.
      DATA: ls_control       TYPE ssfctrlop.
      data: OUTPUT_OPTIONS TYPE  SSFCOMPOP,cf_retcode type sy-subrc.
      DATA: ls_print_data_to_read TYPE lbbil_print_data_to_read.
      DATA: ls_addr_key           LIKE addr_key.
      DATA: ls_dlv-land           LIKE vbrk-land1.
      DATA: ls_job_info           TYPE ssfcrescl.
      DATA: ls_control_param      TYPE ssfctrlop.
      DATA: ls_composer_param     TYPE ssfcompop.
      DATA: ls_recipient          TYPE swotobjid.
      DATA: ls_sender             TYPE swotobjid.
      DATA: NAST_ANZAL LIKE NAST-ANZAL.      "Number of outputs (Orig. + Cop.)
      DATA: NAST_TDARMOD LIKE NAST-TDARMOD.  "Archiving only one time
      DATA: ls_bil_invoice TYPE lbbil_invoice.
      SELECT SINGLE SFORM INTO LF_FORMNAME
            FROM TNAPR
            WHERE KSCHL = NAST-KSCHL
            AND   NACHA = NAST-NACHA.
    *IF NAST-KSCHL = 'ZORD'.
      lf_formname = 'ZSDORDERCONF'.
    *ELSEIF NAST-KSCHL = 'ZOR1'.
      lf_formname = 'ZSDORDERCONF'.
    *ELSEIF NAST-KSCHL = 'ZOR2'.
      lf_formname = 'ZCSORDERCONF'.
      ENDIF.
    determine smartform function module for invoice
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = lf_formname
        IMPORTING
          fm_name            = lf_fm_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
      ENDIF.
      READ TABLE I_HEADER INDEX 1.
    ls_controL-no_dialog = 'X'.
    if sy-ucomm = 'VIEW'.
    LS_CONTROL-PREVIEW = 'X'.
    endif.
      CALL FUNCTION LF_FM_NAME
        EXPORTING
          control_parameters = ls_control
          OUTPUT_OPTIONS     = OUTPUT_OPTIONS
          SO_VBELN           = I_HEADER-VBELN
          SO_AUDAT           = I_HEADER-AUDAT
          SO_REPEAT          = REPEAT
          SO_TYPE            = I_HEADER-VBTYP
          SO_CADD            = ADDCOMP
          SO_CCODE           = COMPCD
        TABLES
          I_HEADER           = I_HEADER
          TKOMV              = TKOMV
          I_ITEM             = TVBDPA
          I_XDATA            = I_XDATA
        EXCEPTIONS
          FORMATTING_ERROR   = 1
          INTERNAL_ERROR     = 2
          SEND_ERROR         = 3
          USER_CANCELED      = 4
          OTHERS             = 5.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ENDFORM.                    "PRINT_DATA
          FORM PROTOCOL_UPDATE                                          *
          The messages are collected for the processing protocol.       *
    FORM PROTOCOL_UPDATE.
      CHECK XSCREEN = SPACE.
      CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
        EXPORTING
          MSG_ARBGB = SYST-MSGID
          MSG_NR    = SYST-MSGNO
          MSG_TY    = SYST-MSGTY
          MSG_V1    = SYST-MSGV1
          MSG_V2    = SYST-MSGV2
          MSG_V3    = SYST-MSGV3
          MSG_V4    = SYST-MSGV4
        EXCEPTIONS
          OTHERS    = 1.
    ENDFORM.                    "PROTOCOL_UPDATE
          FORM SENDER                                                   *
          This routine determines the address of the sender (Table VKO) *
    FORM SENDER.
      SELECT SINGLE * FROM TVKO  WHERE VKORG = VBDKA-VKORG.
      IF SY-SUBRC NE 0.
        SYST-MSGID = 'VN'.
        SYST-MSGNO = '203'.
        SYST-MSGTY = 'E'.
        SYST-MSGV1 = 'TVKO'.
        SYST-MSGV2 = SYST-SUBRC.
        PERFORM PROTOCOL_UPDATE.
        EXIT.
      ENDIF.
      CLEAR GV_FB_ADDR_GET_SELECTION.
      GV_FB_ADDR_GET_SELECTION-ADDRNUMBER = TVKO-ADRNR.         "SADR40A
      CALL FUNCTION 'ADDR_GET'
        EXPORTING
          ADDRESS_SELECTION = GV_FB_ADDR_GET_SELECTION
          ADDRESS_GROUP     = 'CA01'
        IMPORTING
          SADR              = SADR
        EXCEPTIONS
          OTHERS            = 01.
      IF SY-SUBRC NE 0.
        CLEAR SADR.
      ENDIF.                                                    "SADR40A
      VBDKA-SLAND = SADR-LAND1.
      IF SY-SUBRC NE 0.
        SYST-MSGID = 'VN'.
        SYST-MSGNO = '203'.
        SYST-MSGTY = 'E'.
        SYST-MSGV1 = 'SADR'.
        SYST-MSGV2 = SYST-SUBRC.
        PERFORM PROTOCOL_UPDATE.
      ENDIF.
    SELECT SINGLE * FROM TVBUR  WHERE VKBUR = VBDKA-VKBUR.
    IF SY-SUBRC NE 0.
       SYST-MSGID = 'VN'.
       SYST-MSGNO = '203'.
       SYST-MSGTY = 'E'.
       SYST-MSGV1 = 'TVBUR'.
       SYST-MSGV2 = SYST-SUBRC.
       PERFORM PROTOCOL_UPDATE.
    ENDIF.
    ENDFORM.                    "SENDER
    *&      Form  GET_ITEM_SERIALS
          This routine give back the serialnumbers of salesdocument      *
          position. The numbers are processed as print-lines in the      *
          table KOMSER_PRINT.                                            *
    -->  US_VBELN  Salesdocument
    -->  US_POSNR  Position of the salesdocument
    FORM GET_ITEM_SERIALS.
      DATA: KEY_DATA LIKE RSEROB,
            SERNOS LIKE RSEROB OCCURS 0 WITH HEADER LINE.
      KEY_DATA-TASER = 'SER02'.
      KEY_DATA-SDAUFNR = VBDKA-VBELN.
      KEY_DATA-POSNR = VBDPA-POSNR.
      IF KEY_DATA-SDAUFNR IS INITIAL AND NOT
         KEY_DATA-POSNR IS INITIAL.
    beim Anlegen ist Belegnummer leer - deshalb Dummy-Belegnummer
        KEY_DATA-SDAUFNR = CHAR$.
      ENDIF.
    Read the Serialnumbers of a Position.
      REFRESH: TKOMSER,
               TKOMSER_PRINT.
      CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
        EXPORTING
          KEY_DATA            = KEY_DATA
        TABLES
          SERNOS              = SERNOS
        EXCEPTIONS
          KEY_PARAMETER_ERROR = 1
          NO_SUPPORTED_ACCESS = 2
          NO_DATA_FOUND       = 3
          OTHERS              = 4.
      IF SY-SUBRC NE 0 AND
         SY-SUBRC NE 3.
        PERFORM PROTOCOL_UPDATE.
      ENDIF.
      CHECK SY-SUBRC EQ 0.
    Serialnummern übergeben
      TKOMSER-VBELN = SERNOS-SDAUFNR.
      TKOMSER-POSNR = SERNOS-POSNR.
      LOOP AT SERNOS.
        TKOMSER-SERNR = SERNOS-SERNR.
        APPEND TKOMSER.
      ENDLOOP.
    Process the stringtable for Printing.
    CALL FUNCTION 'PROCESS_SERIALS_FOR_PRINT'
          EXPORTING
               I_BOUNDARY_LEFT             = '(_'
               I_BOUNDARY_RIGHT            = '_)'
               I_SEP_CHAR_STRINGS          = ',_'
               I_SEP_CHAR_INTERVAL         = '_-_'
               I_USE_INTERVAL              = 'X'
               I_BOUNDARY_METHOD           = 'C'
               I_LINE_LENGTH               = 50
               I_NO_ZERO                   = 'X'
               I_ALPHABET                  = SY-ABCDE
               I_DIGITS                    = '0123456789'
               I_SPECIAL_CHARS             = '-'
               I_WITH_SECOND_DIGIT         = ' '
          TABLES
               SERIALS                     = TKOMSER
               SERIALS_PRINT               = TKOMSER_PRINT
          EXCEPTIONS
               BOUNDARY_MISSING            = 01
               INTERVAL_SEPARATION_MISSING = 02
               LENGTH_TO_SMALL             = 03
               INTERNAL_ERROR              = 04
               WRONG_METHOD                = 05
               WRONG_SERIAL                = 06
               TWO_EQUAL_SERIALS           = 07
               SERIAL_WITH_WRONG_CHAR      = 08
               SERIAL_SEPARATION_MISSING   = 09.
    IF SY-SUBRC NE 0.
       PERFORM PROTOCOL_UPDATE.
    ENDIF.
    ENDFORM.                               " GET_ITEM_SERIALS
    *eject
    *&      Form  GET_CONTROLL_DATA
          Checks if servicedata for the header exists.                   *
          Checks if servicedata for the position exists.                 *
          Checks if noticedata for the header exists.                    *
          Checks if noticedata for the position exists.                  *
    FORM GET_CONTROLL_DATA.
      DATA: LINES TYPE I.
    Exists servicedata for the header?
      DESCRIBE TABLE TKOMSERVH LINES LINES.
      IF LINES GT 0.
        STEU-VDKEX = 'X'.
      ENDIF.
    Exists servicedata for the position?
      DESCRIBE TABLE TKOMSERVP LINES LINES.
      IF LINES GT 0.
        STEU-VDPEX = 'X'.
      ENDIF.
    Exists noticedata for the header?
      DESCRIBE TABLE TKOMSERVHN LINES LINES.
      IF LINES GT 0.
        STEU-KBKEX = 'X'.
      ENDIF.
    Exists noticedata for the position?
      DESCRIBE TABLE TKOMSERVPN LINES LINES.
      IF LINES GT 0.
        STEU-KBPEX = 'X'.
      ENDIF.
    ENDFORM.                               " GET_CONTROLL_DATA
    *eject
    *&      Form  get_fax_land
          text
         -->P_NAST_TLAND  text
    form get_fax_land using   p_nast_land like nast-tland.
      DATA  L_land    like nast-tland .
      clear L_land.
      IF NOT addr_key-addrnumber IS INITIAL.
        CALL FUNCTION 'WFMC_FAXNUMBER_FOR_ADDRESS'
          EXPORTING
            adrnr          = addr_key-addrnumber
          IMPORTING
            tland          = L_land
          EXCEPTIONS
            addr_not_exist = 1
            OTHERS         = 2.
        IF sy-subrc = 0 AND NOT L_land IS INITIAL.
          p_nast_land = L_land.
        ENDIF.
      ENDIF.
    endform.                    " get_fax_land
    *&      Form  get_data1
          text
         -->P_LS_PRINT_DATA_TO_READ  text
         <--P_LS_ADDR_KEY  text
         <--P_LS_DLV_LAND  text
         <--P_LS_BIL_INVOICE  text
         <--P_CF_RETCODE  text
    FORM get_data1
         USING    IS_PRINT_DATA_TO_READ TYPE LBBIL_PRINT_DATA_TO_READ
         CHANGING CS_ADDR_KEY           LIKE ADDR_KEY
                  CS_DLV-LAND           LIKE VBRK-LAND1
                  CS_BIL_INVOICE        TYPE LBBIL_INVOICE
                  CF_RETCODE.
      IF NAST-OBJKY+10 NE SPACE.
        NAST-OBJKY = NAST-OBJKY+16(10).
      ELSE.
        NAST-OBJKY = NAST-OBJKY.
      ENDIF.
    read print data
    CALL FUNCTION 'LB_BIL_INV_OUTP_READ_PRTDATA'
       EXPORTING
         IF_BIL_NUMBER         = NAST-OBJKY
         IF_PARVW              = NAST-PARVW
         IF_PARNR              = NAST-PARNR
         IF_LANGUAGE           = NAST-SPRAS
         IS_PRINT_DATA_TO_READ = IS_PRINT_DATA_TO_READ
       IMPORTING
         ES_BIL_INVOICE        = CS_BIL_INVOICE
       EXCEPTIONS
         RECORDS_NOT_FOUND     = 1
         RECORDS_NOT_REQUESTED = 2
         OTHERS                = 3.
    IF SY-SUBRC <> 0.
    error handling
       CF_RETCODE = SY-SUBRC.
       PERFORM PROTOCOL_UPDATE.
    ENDIF.
    get nast partner adress for communication strategy
      PERFORM GET_ADDR_KEY USING    CS_BIL_INVOICE-HD_ADR
                           CHANGING CS_ADDR_KEY.
    get delivery land
      PERFORM GET_DLV-LAND USING    CS_BIL_INVOICE-HD_GEN
                           CHANGING CS_DLV-LAND.
    ENDFORM.                                                    " get_data1
    *&      Form  GET_ADDR_KEY
          text
         -->P_CS_BIL_INVOICE_HD_ADR  text
         <--P_CS_ADDR_KEY  text
    FORM GET_ADDR_KEY   USING    IT_HD_ADR   TYPE LBBIL_INVOICE-HD_ADR
                      CHANGING CS_ADDR_KEY LIKE ADDR_KEY.
      FIELD-SYMBOLS -ADDRESS_TYPE.
      ENDIF.
    ENDFORM.                    " GET_ADDR_KEY
    *&      Form  GET_DLV-LAND
          text
         -->P_CS_BIL_INVOICE_HD_GEN  text
         <--P_CS_DLV_LAND  text
    FORM GET_DLV-LAND USING    IT_HD_GEN   TYPE LBBIL_INVOICE-HD_GEN
                      CHANGING CS_DLV-LAND LIKE VBRK-LAND1.
      CS_DLV-LAND = IT_HD_GEN-DLV_LAND.
    ENDFORM.                    " GET_DLV-LAND
    *&      Form  set_print_data_to_read
          text
         -->P_LF_FORMNAME  text
         <--P_LS_PRINT_DATA_TO_READ  text
         <--P_CF_RETCODE  text
    FORM set_print_data_to_read   USING    IF_FORMNAME LIKE TNAPR-SFORM
             CHANGING CS_PRINT_DATA_TO_READ TYPE LBBIL_PRINT_DATA_TO_READ
                      CF_RETCODE.
      FIELD-SYMBOLS:  TYPE XFELD.
      DATA: LT_FIELDLIST TYPE TSFFIELDS.
    set print data requirements
      DO.
        ASSIGN COMPONENT SY-INDEX OF STRUCTURE
                         CS_PRINT_DATA_TO_READ TO  = 'X'.
      ENDDO.
      CALL FUNCTION 'SSF_FIELD_LIST'
        EXPORTING
          FORMNAME                = IF_FORMNAME
        VARIANT                 = ' '
        IMPORTING
          FIELDLIST               = LT_FIELDLIST
       EXCEPTIONS
         NO_FORM                  = 1
         NO_FUNCTION_MODULE       = 2
         OTHERS                   = 3.
      IF SY-SUBRC <> 0.
    error handling
        CF_RETCODE = SY-SUBRC.
        PERFORM PROTOCOL_UPDATE.
      ENDIF.
    ENDFORM.                    " set_print_data_to_read
    *&      Form  set_print_param
          text
         -->P_LS_ADDR_KEY  text
         -->P_LS_DLV_LAND  text
         <--P_LS_CONTROL_PARAM  text
         <--P_LS_COMPOSER_PARAM  text
         <--P_LS_RECIPIENT  text
         <--P_LS_SENDER  text
         <--P_CF_RETCODE  text
    FORM set_print_param   using IS_ADDR_KEY LIKE ADDR_KEY
                                  IS_DLV-LAND LIKE VBRK-LAND1
                         CHANGING CS_CONTROL_PARAM TYPE SSFCTRLOP
                                  CS_COMPOSER_PARAM TYPE SSFCOMPOP
                                  CS_RECIPIENT TYPE  SWOTOBJID
                                  CS_SENDER TYPE  SWOTOBJID
                                  CF_RETCODE TYPE SY-SUBRC.
      DATA: LS_ITCPO     TYPE ITCPO.
      DATA: LF_REPID     TYPE SY-REPID.
      DATA: LF_DEVICE    TYPE TDDEVICE.
      DATA: LS_RECIPIENT TYPE SWOTOBJID.
      DATA: LS_SENDER    TYPE SWOTOBJID.
      LF_REPID = SY-REPID.
      CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
        EXPORTING
          PI_NAST       = NAST
          PI_COUNTRY    = IS_DLV-LAND
          PI_ADDR_KEY   = IS_ADDR_KEY
          PI_REPID      = LF_REPID
          PI_SCREEN     = XSCREEN
        IMPORTING
          PE_RETURNCODE = CF_RETCODE
          PE_ITCPO      = LS_ITCPO
          PE_DEVICE     = LF_DEVICE
          PE_RECIPIENT  = CS_RECIPIENT
          PE_SENDER     = CS_SENDER.
      IF CF_RETCODE = 0.
        MOVE-CORRESPONDING LS_ITCPO TO CS_COMPOSER_PARAM.
      CS_CONTROL_PARAM-NO_OPEN
      CS_CONTROL_PARAM-NO_CLOSE
        CS_CONTROL_PARAM-DEVICE      = LF_DEVICE.
        CS_CONTROL_PARAM-NO_DIALOG   = 'X'.
        CS_CONTROL_PARAM-PREVIEW     = XSCREEN.
        CS_CONTROL_PARAM-GETOTF      = LS_ITCPO-TDGETOTF.
        CS_CONTROL_PARAM-LANGU       = NAST-SPRAS.
      CS_CONTROL_PARAM-REPLANGU1
      CS_CONTROL_PARAM-REPLANGU2
      CS_CONTROL_PARAM-REPLANGU3
      CS_CONTROL_PARAM-STARTPAGE
      ENDIF.
    ENDFORM.                    " set_print_param
    *&      Form  add_smfrm_prot
          text
    -->  p1        text
    <--  p2        text
    FORM add_smfrm_prot .
      DATA: LT_ERRORTAB             TYPE TSFERROR.
    DATA: LF_MSGNR                TYPE SY-MSGNO.
      FIELD-SYMBOLS:   TYPE LINE OF TSFERROR.
    get smart form protocoll
      CALL FUNCTION 'SSF_READ_ERRORS'
        IMPORTING
          ERRORTAB = LT_ERRORTAB.
    add smartform protocoll to nast protocoll
      LOOP AT LT_ERRORTAB ASSIGNING .
      CLEAR LF_MSGNR.
      LF_MSGNR = <FS_ERRORTAB>-ERRNUMBER.
        CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
             EXPORTING
                  MSG_ARBGB = -MSGID
                MSG_NR    = LF_MSGNR
                  MSG_NR    = -MSGV4
             EXCEPTIONS
                  OTHERS    = 1.
      ENDLOOP.
    ENDFORM.                    " add_smfrm_prot
    *&      Form  protocol_update_spool
          text
         -->P_1115   text
         -->P_LS_SPOOLID  text
         -->P_SPACE  text
         -->P_SPACE  text
         -->P_SPACE  text
    FORM protocol_update_spool  USING    SYST_MSGNO
                                         P_LS_SPOOLID
                                         P_SPACE1
                                         P_SPACE2
                                         P_SPACE3.
      syst-msgid = 'VN'.
      syst-msgno = syst_msgno.
      syst-msgv1 = p_ls_spoolid.
      CONDENSE syst-msgv1.
      CHECK xscreen = space.
      CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
        EXPORTING
          msg_arbgb = syst-msgid
          msg_nr    = syst-msgno
          msg_ty    = syst-msgty
          msg_v1    = syst-msgv1
          msg_v2    = p_space1
          msg_v3    = p_space2
          msg_v4    = p_space3
        EXCEPTIONS
          OTHERS    = 1.
    ENDFORM.                    " protocol_update_spool
    This is Include ZSDI0003
    *&  Include           ZSDI0003
    TABLES: KOMK,                          "Communicationarea for conditions
            KOMP,                          "Communicationarea for conditions
            KOMVD,                         "Communicationarea for conditions
            VBCO3,                         "Communicationarea for view
            VBDKA,                         "Headerview
            VBDPA,                         "Itemview
            VBDPAU,                        "Subitemnumbers
            CONF_OUT,                      "Configuration data
            SADR,                          "Addresses
            TVAG,                          "Reason for rejection
            VEDKA,                         "Servicecontract head data
            VEDPA,                         "Servicecontract position data
            VEDKN,                         "Servicecontract head notice data
            VEDPN,                         "Servicecontract pos. notice data
            RISERLS,                       "Serialnumbers
            KOMSER,                        "Serialnumbers for print
            TVBUR,                         "Sales office
            TVKO,                          "Sales organisation
            ADRS,                          "Communicationarea for Address
            FPLTDR,                        "billing schedules
            WTAD_ADDIS_IN_SO_PRINT,        "additional
            WTAD_BUYING_PRINT_EXTRA_TEXT,  "texts belonging to additional
            VBAK,                          "Sales Document Header
            VBAP,                          "Sales Document Item
            VBPA,                          "Sales Document: Partner
            T001,                          "Company codes
            MAST,                          "Material to BOM Link
            STKO.                          "BOM Header
    INCLUDE RVADTABL.
    INCLUDE RVDIREKT.
    INCLUDE VEDADATA.
    data for access to central address maintenance
    INCLUDE SDZAVDAT.
    TYPE-POOLS: ADDI.
    DATA PRICE_PRINT_MODE(1) TYPE C.       "Print-mode
    DATA: RETCODE   LIKE SY-SUBRC.         "Returncode
    DATA: REPEAT(1) TYPE C.
    DATA: XSCREEN(1) TYPE C.               "Output on printer or screen
    DATA: BEGIN OF STEU,                   "Controldata for output
            VDKEX(1) TYPE C,
            VDPEX(1) TYPE C,
            KBKEX(1) TYPE C,
            KBPEX(1) TYPE C,
      

    1) you shouldn't have to do anything with the properties file written for a specific Locale.
    2) check this out: http://java.sun.com/j2se/1.4/docs/guide/intl/encoding.doc.html
    3) BIG5 is BIG5 everywhere.
    4) don't know about this one
    5,6,7) If you have Windows 98 Chinese Edition, you can probably switch back and forth between English and Chinese -- just put the Chinese characters in a string much like the normal characters. Otherwise, you'll have to enter the Unicode char.
    V.V.

  • I need help with speed of deleting do noy know how to fix

    am not very good at this, need help, deleting button is so slow it is not working as before

    Check your mails are SYNCed properly or not. otherwise reSYNC your emails and check it out.
    Try in safemode also
    *https://support.mozilla.org/en-US/kb/safe-mode

  • Urgent Problem, need help asap.

    Hello everyone,
    I'm sorry for the alarmist title, but I need help and I need it badly. Just last night, my macbook froze with nothing working. The mouse froze, the interrupt keys didn't work, nothing. I shut down the laptop, and tried to restart. I noticed a clicking sound coming from the lower left hand corner of the macbook. I'm assuming this is the hard drive.
    What happens is that there will be two clicks happening in a rythmic fashion, and after 15 second of booting up, a folder will appear with a question mark on the screen. The only thing I can do is power it down. Can someone please describe what is happening and make suggestions?
    The kicker is that I'm a college student studying in Denmark for the semester. The laptop is my only lifeline to back home. Please, any help is greatly appreciated.
    Matt

    You may have a disk failure or simply corrupted files. If you have a bootable backup that is working, then you can boot from it, erase your hard drive, then restore your backup. If not then do this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the drive is OK then you can reinstall OS X:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Need help on how to a user can control a video clip using their mouse

    I need help. I've got a video clip of a rotating 3D
    object(left to right) and i would like the user to be able to
    control the rotation of the object using their mouse. I've looked
    everywhere and i'm at a lost. Can anyone help me
    Here is a link to what i'm trying to achieve:
    http://www.sun.com/servers/blades/6000/gallery/index.xml?p=1&s=2
    I know they use Java but i'm sure this can be done in Flash.
    Thanks
    Ray

    Here are the instructions...
    Update firmware with DOS CD
    To boot from CD you have to hold down the option key (<alt>) during startup. A HDD icon and a CD should appear on the gray screen. The HDD has the volume name written below and the CD is named Windows. Select the CD and boot to DOS.
    Hit <ESC> to skip the README.TXT
    Use PG UP/DOWN keys on an external keyboard to scroll through the readme, using arrow keys may lock DOS.
    SeaFlash offers some options you should explore before performing the update. If you just want to do it ASAP then hit <D>.
    Hit <L> to list compatible drives and FW version. (Column New FW version should state SD24, hit <ESC> to go back to main menu.)
    Hit to scan your drive(s). (Shows your model and FW, <ESC> for main menu)
    Finally hit <D> to update your Momentus XT to SD24. (takes about 15s to update)
    Power off your Mac.
    -- Although it did made sense to what you are saying to just follow Seagate's instructions. But they only had instructions outside the realm of MS Windows is to burn it on a disk and run a cold boot to the disk drive. Otherwise if Seagate did provide detail instruction on how to install this then can you provide me a link?
    Thanks again....

  • Need help encrypting, etc - New Wireless User

    I need help encrypting my network, I notice there are 5 wireless networks within range and they are all secure except mine.  I also wonder why my signal is just "fair" .. I don't really understand this whole wireless thing, so any help anyone could give me would be appreciated.

    First and foremost... what is the exact model number of your wireless device?
    Anyway, let's use a hardwired PC to configure everything. On the hardwired PC, open up IE and on the address bar type in 192.168.1.1 (username just leave it blank, password as a default is admin)...
    Go the wireless tab do these steps:
    ► change the SSID (that will be the name of your wireless network... use any name you would want to use)...
    ► for proper signal propagation choose channel 11
    Then to secure your network:
    ► go the wireless security subtab
    ► choose WPA personal
    ► input on the shared key box your desired wireless password (should be at least 8 characters long)....

  • I accidentally deleted important text messages between me and a friend I really need these back and i need help trying to find a way i haven't synced my iPhone to the computer since 2013

    I need these deleted text messages, they are very important.  I have been up all night trying to recover these lost text messages but no matter how many times I try I can't get them. I haven't synced my device to itunes since sometime in 2013 and my icloud isn't working and doesn't say that it backs up text messaging. I'm out of ways to get my deleted text message. It's very important that i get it back. It can stop a lot of problems that  I am having.

    If you have not made a backup of the device while the text messages were on the device, then there is nothing that you can do. If you have created a backup of the device with the messages on there, then you can restore to that backup. The iCloud backup does backup SMS, so if you did make one, then they would be there. Otherwise, you are out of luck.

  • Need help on How to delete duplicate data

    Hi All
    I need your help in finding the best way to delete duplicate data from a table.
    Table is like
    create table table1 (col1 varchar2(10), col2 varchar2(20), col3 varchar2(30));
    Insert into table1 ('ABC', 'DEF','FGH');
    Insert into table1 ('ABC', 'DEF','FGH');
    Insert into table1 ('ABC', 'DEF','FGH');
    Insert into table1 ('ABC', 'DEF','FGH');
    Now I want a sql statement which will delete the duplicate rows and leaves 1 row of that data in the table. ie.in the above example delete 3 rows of duplicate data and leave a row of that data in the table. My oracle version is 8i.
    Appreciate your help in advance.

    Either of these will work, the best approach will depend on how big the table is, and how many duplicates there are.
    SQL> SELECT * FROM table1;
    COL1       COL2                 COL3
    ABC        DEF                  FGH
    ABC        DEF                  FGH
    ABC        DEF                  FGH
    ABC        DEF                  FGH
    ABC        DEF                  IJK
    BCD        EFG                  HIJ
    BCD        EFG                  HIJ
    SQL> DELETE FROM table1 o
      2  WHERE rowid <> (SELECT MAX(rowid)
      3                  FROM table1 i
      4                  WHERE o.col1 = i.col1 and
      5                        o.col2 = i.col2 and
      6                        o.col3 = i.col3);
    4 rows deleted.
    SQL> SELECT * FROM table1;
    COL1       COL2                 COL3
    ABC        DEF                  FGH
    ABC        DEF                  IJK
    BCD        EFG                  HIJ
    SQL> ROLLBACK;
    Rollback complete.
    SQL> CREATE TABLE table1_tmp AS
      2  SELECT DISTINCT * FROM table1;
    Table created.
    SQL> TRUNCATE TABLE table1;
    Table truncated.
    SQL> INSERT INTO table1
      2  SELECT * FROM table1_tmp;
    3 rows created.
    SQL> SELECT * FROM table1;
    COL1       COL2                 COL3
    ABC        DEF                  FGH
    ABC        DEF                  IJK
    BCD        EFG                  HIJThere are other approaches as well (e.g. see the EXCEPTIONS INTO clause of the ALTER TABLE command), but these are the most straightforward.
    HTH
    John

  • Urgent I need help to restore my files

    Hi,
    In my iPhone there was a message that asked for updating the softawre. and when I tried for the update it asked me to connect with PC. I connected my iPhone with PC and it made the update (I saw the update process on the iphone screen). but the iphone did not turned on, there was a sign on the iphone screen that indicated that I have to connect the iphone to the itune, (even it was already connected to the pc), then in the itune a message appear that mentioned It is need to restore, when I pressed restore it told me are you sure you want to update and restore, I pressed yes.
    Now the iphone updated, BUT nothing remain on my iPhone.
    How I can restore my files, there was hundred of pictures, all my emails and files, many good programs, .... etc
    what I do please help?
    Thank you
    Jamal

    How do I view my Photo Stream?
    On your iPhone, iPad or iPod touch, your photos will appear in the Photos app. If you're using iOS 6 or later, you can find your photos by tapping the Photo Stream tab and then tapping the My Photo Stream album. In iOS 5, your photos are in the Photo Stream album.
    On your Mac, they appear in the Photo Stream view in iPhoto or Aperture. In iPhoto 9.4 or later or in Aperture 3.4 or later, open the My Photo Stream album in the Photo Stream view.
    On a PC, your photos download to the My Photo Stream (Download) folder. By default, this folder is located at C:\Users\\Pictures\Photo Stream\My Photo Stream. You can change this location by visiting Photo Stream Options in the iCloud Control Panel for Windows.
    On Apple TV, your photos will appear in the Photo Stream (or My Photo Stream) view under Internet in the main Apple TV menu after you sign in with your iCloud account.

  • I need help can i find out what device request a password reset.

    I dont check my email very often and when i did i had a email from apple saying how do i rest my password. they sent it to me on 8/15/13 at 2:30pm. also i went to my icloud account and noticed i only have 1 ipod and my sons iphone registered. i did have 2 ipods and my sons iphone. so i need some help finding out if i can get that email tracked back to the device. Also i had another email from 7/9/13.
    Your Apple ID,  was just used to download Paper Run from the App Store on a computer or device that had not previously been associated with that Apple ID. You may also be receiving this email if you reset your password since your last purchase. that is what the 2nd email said. so now i am worried. if anyone can help lead me in the right derection. thank you

    I do not think you can find out on what device the purchases was made.
    I would change the password for your account.
    You can also contact iTunes and see what they can do
    Apple - Support - iTunes - Contact Us

  • Need help, unable to find my Serial Number

    I recently moved to a new house, with all the ensuing hassles. Shortly after moving I decided to upgrade my computer to Windows 8. And in order to try and get rid of some old problems I only kept the private files and did a clean update.
    After (succesful) Windows upgrade I had to reinstall my Adobe Photoshop CS6 Extended, only to find out that I cannot find the box containing the CD. It must have been misplaced during our moving. On my Adobe account on adobe.com I find no trace of the order, although I did buy it through Adobe. All I have is an email from Adobe thanking me for buying the CS6 and encouraging me to register my new product. Which I forgot to do.
    So here I am, without my serial number and thus unable to get Photoshop back onto my computer. This is extremely worrying, is there anything I can do?
    Regards Rotski

    Serial Number or Activation Issues
    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

Maybe you are looking for