[Urgent Issue] Msgstore running out me of my GPRS ...

I use pureview 808. Last week I received the Nokia update. The update installed a new program called msgstore. If the process msgstore is killed, the normal message will not be able to be sent or received.
I notice that the msgstore process use my GPRS plan without notifying me. Actually, as today is the first day of June, msgstore has run out the whole month's plan of 30MB in 7 hours. I suppose I have closed the GPRS soft switch in the phone before such a thing happened. Additional data plan will be very costly. I will try to order more data plan but it wont be free.
PLEASE, PLEASE get me back to the original system. Otherwise, the mobile phone will be completely not usable: either no message, or very costly GPRS.
PLEASE contact me at [email protected] or [email protected] PLEASE!
Moderator's note: E-mail addressed were removed. It is unwise to publish personal contact information on a public forum.

If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
Also make sure you clear your browser cache before viewing you published files.

Similar Messages

Please help me to run this CMP BEAN, I need help urgently, I am running out of time :(

Hi,
I am facing this problem, Please help me, I am attaching the source files
also along with the mail. This is a small CMP EJB application, I am using
IAS SP2 on NT server with Oracle 8. I highly appreciate if someone can send
me the working copy of the same. I need these urgent. I am porting all my
beans from bea weblogic to Iplanet. Please help me dudes.
Err.........
[06/Sep/2001 13:41:29:7] error: EBFP-marshal_internal: internal exception
caught
in kcp skeleton, exception = java.lang.NoSuchMethodError
[06/Sep/2001 13:41:29:7] error: Exception Stack Trace:
java.lang.NoSuchMethodError
at
com.se.sales.customer.ejb_kcp_skel_CompanyHome.create__com_se_sales_c
ustomer_Company__java_lang_Integer__indir_wstr__215617959(ejb_kcp_skel_Compa
nyHo
me.java:205)
at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:297)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Caught an exception.
java.rmi.RemoteException: SystemException: exid=UNKNOWN
at com.kivasoft.eb.EBExceptionUtility.idToSystem(Unknown Source)
at com.kivasoft.ebfp.FPUtility.replyToException(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:324)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Thanks in advance
Shravan
[Attachment iplanet_app.jar, see below]
[Attachment iplanet_src.jar, see below]

One reason that I sometimes get 'NoSuchMethodError' is when I make a change to a
java class that is imported into another java class. When I go to run the
importing class, it will throw a 'NoSuchMethodError' on any methods that I've
changed in the imported class. The solution is to recompile the importing class
with the changed classes in the classpath.
shravan wrote:
Hi,
I am facing this problem, Please help me, I am attaching the source files
also along with the mail. This is a small CMP EJB application, I am using
IAS SP2 on NT server with Oracle 8. I highly appreciate if someone can send
me the working copy of the same. I need these urgent. I am porting all my
beans from bea weblogic to Iplanet. Please help me dudes.
Err.........
[06/Sep/2001 13:41:29:7] error: EBFP-marshal_internal: internal exception
caught
in kcp skeleton, exception = java.lang.NoSuchMethodError
[06/Sep/2001 13:41:29:7] error: Exception Stack Trace:
java.lang.NoSuchMethodError
at
com.se.sales.customer.ejb_kcp_skel_CompanyHome.create__com_se_sales_c
ustomer_Company__java_lang_Integer__indir_wstr__215617959(ejb_kcp_skel_Compa
nyHo
me.java:205)
at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:297)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Caught an exception.
java.rmi.RemoteException: SystemException: exid=UNKNOWN
at com.kivasoft.eb.EBExceptionUtility.idToSystem(Unknown Source)
at com.kivasoft.ebfp.FPUtility.replyToException(Unknown Source)
at
com.se.sales.customer.ejb_kcp_stub_CompanyHome.create(ejb_kcp_stub_Co
mpanyHome.java:324)
at
com.se.sales.customer.ejb_stub_CompanyHome.create(ejb_stub_CompanyHom
e.java:89)
at
com.se.sales.customer.CompanyServlet.doGet(CompanyServlet.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unkno
wn Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
Thanks in advance
Shravan
Name: iplanet_app.jar
iplanet_app.jar Type: Java Archive (application/java-archive)
Encoding: x-uuencode
Name: iplanet_src.jar
iplanet_src.jar Type: Java Archive (application/java-archive)
Encoding: x-uuencode

Urgent: Issue with time out sql auzre

We are trying to connect to our SQL AZURE databased (Northern Europe) we keep getting timeout error. Initially it was post-login phase error and now we keep getting 10600 error. We are on V12 version.
Any ideas please?
Here is the detail
An unhandled exception of type 'System.Data.SqlClient.SqlException' occurred in System.Data.dll
Additional information: Connection Timeout Expired. The timeout period elapsed during the post-login phase. The connection could have timed out while waiting for server to complete the login process and respond; Or it could have timed out while
attempting to create multiple active connections. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=303; handshake=922; [Login] initialization=0; authentication=0; [Post-Login] complete=13000;

Resolved offline.
In general, please follow best practices on the linked documentation page below with regards to connectivity issues :
http://azure.microsoft.com/en-us/documentation/articles/sql-database-connect-central-recommendations/ .

SQL: Issue with running out of storage on server when running table-valued function

SQL Version: 2008 (not r2)
Problem: I'm getting the following error message when running a table-valued function:
Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object 'dbo.SORT temporary run storage: 141072001204224' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files
to the filegroup, or setting autogrowth on for existing files in the filegroup.
Request: Could anyone tell me if there are modifications that I could make to my SQL code to avoid this storage issues?
Thanks,
....bob sutor
Code Facts:
The JCCD table is a large table 2MM records
The other tables in the JOINS are very small 15 records or less
SQL Function Code:
ALTER FUNCTION [dbo].[xcft_XAWP_GLBalance_JCCD_Detail]()
RETURNS @JCGLDetail TABLE
 JCCo tinyint
 , Job varchar(10)
 , PostingSource varchar(10)
 , CostToDate numeric(12,2)
 , Phase varchar(20)
 , EarnType smallint
 , LiabilityType smallint
 , CostType tinyint
 , ControllingSetting varchar(30)
 , GLAccountCharged varchar(20)
 , DeptNum varchar(10)
 , DeptDesc varchar(30)
 , JCDC_CostType tinyint
 , CostTypeGL_Open varchar(20)
 , CostTypeGL_Closed varchar(20)
 , JCDO_ExcludePR varchar(1)
 , JCDO_Phase varchar(20)
 , PhaseGL_Open varchar(20)
 , PhaseGL_Closed varchar(20)
 , JCDL_LiabType smallint
 , LiabTypeGL_Open varchar(20)
 , LiabTypeGL_Closed varchar(20)
 , JCDE_EarnType smallint
 , EarnTypeGL_Open varchar(20)
 , EarnTypeGL_Closed varchar(20)
AS
BEGIN
DECLARE
@WIPMonthCurrent date
SET @WIPMonthCurrent = (Select TOP 1 WIPMonth FROM udxcWIPMonths WHERE ActiveWIPPeriod = 'Y')
INSERT INTO @JCGLDetail
 JCCo
 , Job
 , PostingSource
 , CostToDate
 , Phase
 , EarnType
 , LiabilityType
 , CostType
 , DeptNum
 , DeptDesc
 , JCDC_CostType
 , CostTypeGL_Open
 , CostTypeGL_Closed
 , JCDO_ExcludePR
 , JCDO_Phase
 , PhaseGL_Open
 , PhaseGL_Closed
 , JCDL_LiabType
 , LiabTypeGL_Open
 , LiabTypeGL_Closed
 , JCDE_EarnType
 , EarnTypeGL_Open
 , EarnTypeGL_Closed
SELECT
 JCCD.JCCo, JCCD.Job, JCCD.Source, sum(JCCD.ActualCost) AS CostToDate, JCCD.Phase, JCCD.EarnType, JCCD.LiabilityType, JCCD.CostType
 , JCDM.Department, JCDM.Description
 , JCDC.CostType AS JCDC_CostType, JCDC.OpenWIPAcct AS CostTypeGL_Open, JCDC.ClosedExpAcct AS CostTypeGL_Closed
 , JCDO.ExcludePR AS JCDO_ExcludePR, JCDO.Phase AS JCDO_Phase, JCDO.OpenWIPAcct AS PhaseGL_Open, JCDO.ClosedExpAcct AS PhaseGL_Closed
 , JCDL.LiabType AS JCDL_LiabType, JCDL.OpenBurdenAcct AS LiabTypeGL_Open, JCDL.ClosedBurdenAcct AS LiabTypeGL_Closed
 , JCDE.EarnType AS JCDE_EarnType, JCDE.OpenLaborAcct AS EarnTypeGL_Open, JCDE.ClosedLaborAcct AS EarnTypeGL_Closed
FROM JCCD
LEFT JOIN JCJP ON JCCD.JCCo = JCJP.JCCo AND JCCD.Job = JCJP.Job
LEFT JOIN JCCM ON JCJP.JCCo = JCCM.JCCo AND JCJP.Contract = JCCM.Contract
LEFT JOIN JCDM ON JCCM.JCCo = JCDM.JCCo AND JCCM.Department = JCDM.Department
LEFT JOIN JCDC ON JCDM.JCCo = JCDC.JCCo AND JCDM.Department = JCDC.Department AND JCCD.CostType = JCDC.CostType
LEFT JOIN JCDE ON JCDM.JCCo = JCDE.JCCo AND JCDM.Department = JCDE.Department AND JCCD.EarnType = JCDE.EarnType
LEFT JOIN JCDO ON JCDM.JCCo = JCDO.JCCo AND JCDM.Department = JCDO.Department AND JCCD.Phase = JCDO.Phase
LEFT JOIN JCDL ON JCDM.JCCo = JCDL.JCCo AND JCDM.Department = JCDL.Department AND JCCD.LiabilityType = JCDL.LiabType
LEFT JOIN xcft_XAWP_FiscalPeriodCutoffs_ForWIPMonth() AS cutoffs ON JCCD.JCCo = cutoffs.GLCo
WHERE
 JCCD.Mth <= cutoffs.FiscalYear_LastMonth
 AND JCCD.Job IN(SELECT JobNum FROM budxcWIPData_SQL WHERE WIPMonth = @WIPMonthCurrent)
 AND JCCD.JCCo IN(SELECT JCCo FROM JCCO WHERE udExcludeFromWIP <> 'Y' or udExcludeFromWIP IS NULL)
 --AND LTRIM(RTRIM(JCCD.Job)) = '71-'
GROUP BY
 JCCD.JCCo, JCCD.Job, JCCD.Source, JCCD.Phase, JCCD.EarnType, JCCD.LiabilityType, JCCD.CostType
 , JCDM.Department, JCDM.Description
 , JCDC.CostType, JCDC.OpenWIPAcct, JCDC.ClosedExpAcct
 , JCDO.ExcludePR, JCDO.Phase, JCDO.OpenWIPAcct, JCDO.ClosedExpAcct
 , JCDL.LiabType, JCDL.OpenBurdenAcct, JCDL.ClosedBurdenAcct
 , JCDE.EarnType, JCDE.OpenLaborAcct, JCDE.ClosedLaborAcct
UPDATE @JCGLDetail
 SET
 ControllingSetting =
 CASE WHEN Phase = JCDO_Phase AND JCDO_ExcludePR = 'N' THEN 'PhaseOverride-PR Excluded'
 WHEN Phase = JCDO_Phase AND JCDO_ExcludePR = 'Y'
 AND EarnType NOT IN(Select EarnType FROM JCDE WHERE JCDE.JCCo = JCCo AND JCDE.Department = DeptNum)
 AND LiabilityType NOT IN(Select LiabType FROM JCDL WHERE JCDL.JCCo = JCCo AND JCDL.Department = DeptNum)
 THEN 'PhaseOverride-PR Not Excluded'
 WHEN EarnType = JCDE_EarnType THEN 'Earn Type Override'
 WHEN LiabilityType = JCDL_LiabType THEN 'Liability Type Override'
 ELSE 'Cost Type' END
UPDATE @JCGLDetail
 SET
 GLAccountCharged =
 CASE WHEN ControllingSetting = 'PhaseOverride-PR Excluded' OR ControllingSetting = 'PhaseOverride-PR Not Excluded'
 THEN PhaseGL_Open
 WHEN ControllingSetting = 'Earn Type Override' THEN EarnTypeGL_Open
 WHEN ControllingSetting = 'Liability Type Override' THEN LiabTypeGL_Open
 ELSE CostTypeGL_Open END
RETURN
END
Bob Sutor

well, did you either restart the instance or add another tempdb file (no restart required) to let other transactions continue on the server.
or check if autogrowth was limited, change that to unlimnited , to the transactions conintue..
the function may be dumping the data on to tempdb, how much data are you excepting back...what are indexes on the tables
Hope it Helps!!

Can you archive old calendar items in Entourage so you don't run out of space on your Blackberry?

Hi everyone,
I have a Sprint Pearl 8130 and I am syncing with PocketMac to Entourage 2004 on an iBook G4 running OS 10.3.
Most of my syncing issues are minor (for some reason, in contacts, work and home email addresses switch fields, but I can live with that) and I don't have too many complaints about PocketMac for now....
My question is - Does anyone know how to archive old calendar items so that my Blackberry doesn't run out of space? I have calendar items going back to the beginning of 2008. I don't need past calendar items on my Blackberry, except for reoccurring items, like birthdays and such, and maybe a month's worth of old appointments just for reference. My Blackberry has run out of space a couple of times and when it deletes the appointments from my Blackberry, syncing wants to either delete from the Mac or restore to the Blackberry. I know you can do this with a Palm and their Palm software, since I used to have one and I was able to archive items older than a week. Then you would be able to access them in a separate archive profile.
I have searched everywhere and the closest thing I can find is to purchase Missing Sync and set to match my sync date range. https://support.markspace.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=327. But that doesn't really solve my issue of running out of space on my Blackberry. The other thing that I could think of is to export the calendar items into a .rge file, then delete the calendar items from there, sync, and have PocketMac remove items from my Blackberry, but it would be a pain to easily access old calendar items.
I appreciate any thoughts, ideas and especially solutions!

I have the exact opposite issue you mentioned
my client wants his archived calender items to be synched to his 8830 world wide ed.
he is running RIM software (DesktopManager) v 6.4
BES 2007
current issue is that his archived old calendars are not synchronizing to his handheld; we tried to force his PC to synch those items manually through cable, which didn't help, since our BES policy force waireless synch policy to the device and wireless synch never can see the archived items files
I think if you can set the option on your device so it turns on the calendar wireless synch, and also make sure MAC does not select archive to synch
Calendar > Options > General settings or /Wireless synch set to ON;
if you running BES set Calendar Wireless synch off

Issue when running acutal Off-cycle payroll in India!

Dear experts!
I have an urgent issue when running ACTUAL off-cycle payroll in India as below: "Payroll already performed once in future".
In testing mode, everything is fine. I have tried to check payroll result in pc_payresult and pu01, and Infotype 3. All of them show the last payroll in 31.07.2011. But now I run off-cycle payroll on 20.08.2011, this error is displayed. So I cannot run actual payroll for them.
Please help me! I am really appreciated.
Regards!
Woody.

Hello
Normally this error message reflects an inconsistency in the payroll
directory cluster, that you can view via RPUDIR00. What you can do to
restore the consistency is to run the report RPUDIR00 for this pernr
with the following parameters on the selection screen:
Payroll for country
Personnel number
Compare directory
Payroll results structure
detailed log
Save new directory X < this will write the new directory. If you want to test first, do not select this parameter.
Afterwards it should be possible to run payroll for this employee.
Thanks and Kind Regards
Ramana

How do i resolve an issue where i have run out of application memory?

My imac says i have run out of application memory and that i should quit applications. How do i resolve this issue?

The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Battery issues!! takes 6hrs to charge and runs out in less 2hrs

I've had my laptop(unibody 2008 model) for 8 months now. I've noticed that battery life is so much shorter than the one I had before (early 2007 model)
However, when i took it to apple service center they said there's nothing wrong with the numbers and it all looks normal. so i've just been using it since there was nothing i could do...
Is it really normal for your battery to take more than 6 hours to charge?(all i did was web browsing)
Also, NOW the battery runs out in less than 1hr and half...
Full charge capacity (mAh): 3468
Cycle count: 234
Condition: Check Battery
iStatPro says my battery health is 75%
they guys at the apple center said that it's because my cycle counts are too high but come on! since my battery ran out in less than 2hrs 30mins from the beginning, I just had to charge it more often...
this is something new that just started happening
my laptop just shuts down the second it gives me the 10minute warning...
Is there anything I can do so apple replaces my battery or am i just doomed to buy a new one?
it's frustating how apple keeps saying there's nothing wrong with it..

Apple rates your battery to retain 80% of its original Full Charge Capacity (4650 mAh) after 300 cycles:
http://www.apple.com/batteries/notebooks.html
Yours has only 75% of its original capacity after only 234 cycles and is now faulty — that's what the "Check Battery" notation in System Profiler indicates. Point this out to the manager of your local Apple Store and ask to have it replaced. If you don't get anywhere with the manager, call Apple Customer Relations at 1-800-767-2775 and make the same request, explaining that the store has failed to comply. Be polite, patient and calm at all times, and be explicit about your reasonable expectation that Apple will make good on what it says you can expect of your battery.

How to put check box in a table format at the out put ? Urgent issue...

Hi,
I am working an assignment to assign multiple roles for multiplr user.
In selection screen we have to enter mutiple EMPNO from ..to
1) in second screen we will get the empno, First name, last name, Position,
 From date, To date, Sap user ID, Email id in the table formate with first
 column with Check box.
2) In second screen below the table I have to place the multiple roles just like in
 the step loop format and below this one Execute button should be there.
If we select the multiple employees or single employee and place the multiple roles or single roles and if I click the execute button then the multiple roles will be assigned to the multiple employees. The empno and roles will come from table and step loop to internal table and the same will pass to the BDC.
For this requirement I prepered recording for Transaction PFCG. But I can't understand how to design the second screen that table format and the step loop format. Can anybody give any idea or any coding to design the second screen.
and how to meet the requirement. This is urgent issue. Good SDN points will be reworded.
Witing for kind response.
Thanks in advance.
Bansidhar

Hi upendra
There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
for(int i=0;i<wdContext.node<tablenode>()..size();i++)
if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
else
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
See the attribute is boolean so pass true or false as a values in setter methods.
Regards
Kalyan

Ipad 3 battery will still running out while it is off...

Hi,
I have having issue in my ipad 3 battery where it will still running out eventhough i have off it and the fully battery ran out in a day eventhough i put it in stand by mode ...also i can feel that there is magnetic feel at the back of the ipad whenever i connect it to my computer....??
Is this mean that my ipad battery is leaking off???
Is anyone having the same issue out there????
Need help urgently!!!!!!
Thank you.

Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
What do you mean when you say your iPad has a "magnetic feel at the back of the iPad" when you connect it to your computer?

MBP running out of battery power before sleeping - Help!

Hi
My MacBook Pro has been running out of battery power before the memory-saving sleep mode kicks in, so it dies with a little click of the HD. It's not a hibernation state as when I reattach the power supply it boots up a new session.
I've noticed this since upgrading to Snow Leopard last year, but put it down to an old battery that had 45% charge and wasn't powering the MBP properly. I now have a replacement A1175 5600mAh battery which is giving me 2-3hrs usage (which I'm pleased at), but now it still dies before sleeping!
I have tried to cycle the new battery, but can't. I have reset the SMC several times, with no effect.
I used to cycle the battery every week or two, running it down until it would no longer wake from sleep, recharge overnight etc, but now I can't do this because it will die before sleeping!
I've read quite a few articles over the net about this issue, but there seems like no cure. It's really annoying me now as I frequently work on the move and a dying MBP could potentially be disastrous.
Can anyone shed some light on this issue? Is there something I haven't tried yet? I think it's a late '06 MBP.
From System Profiler:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version (system): 1.12f5
Battery Information:
Model Information:
Serial Number: ˇ{ïwl"Ó*%#Û˙� $«\
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: a0b0
PCB Lot Code: c0f1
Firmware Version: 8800
Hardware Revision: 0000
Cell Revision: 0000
Charge Information:
Charge remaining (mAh): 1320
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 5315
Health Information:
Cycle count: 12
Condition: Normal
Battery Installed: Yes
Amperage (mA): 1500
Voltage (mV): 11560
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: No
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x001e1900
Charging: Yes

If you are not getting a warning, then there is something amiss with your battery. If a SMC reset and calibration does not fix the problem, then you may need to make an appointment at the genius bar and arrange to have your battery tested.
My old battery started doing the same thing--shutting down without warning. I replaced it, and the replacement battery started doing the exact same thing. I then returned the replacement, and the next replacement battery behaves in a normal fashion.
My first battery was worn out. My second battery was defective. My third battery is good.
Your battery should still be under warranty. Go back to where you got it and show them what it is doing and see if you can get a replacement.
Good luck!

Connection leaks and application is running out of connection

Hi All,
We have configured the SQL Database external resource for OBPM specific connection pool. All the business processes are using the Fuego.Sql package for the data base transaction calls. I have no clue how this package is managing the database connections. If more than 25 users perform concurrent testing, the application is running out of connections. Connection pool configuration details as below.
Maximum Pool Size : 500
Maximum connections per user : 50
Minimun Pool Size : 0
Connection Idle Time (mins). : 5
Maximum Opened Cursors : 1000
Please share your thoughts on how I can track and fix this issue. Also please let me know the answers below.
1. Is there any way to find out the stats about the connection pool
2. If I configure the remote JDBC that points to J2EE datasource, would that fix this issue.
I appreciate your help.
Thanks,

Can anyone please share your ideas?
Thanks,

HT1689 since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.

Run out of licenses, can do 20 reports in 20 minutes before receiving error

I have a problem with running out of Licenses when using our ASP.NET Web Application.Our Web Application exports and opens a Crystal Report to PDF when the user clicks on the report link. Unfortunately we have only a certain number of licenses available and after each use it's useless for about 20 minutes! In a 20 minute period we are able to run up to 20 reports before getting the "out of licenses" error page. So if you have 5 users going through multiple reports in a short time we've run out of licenses and they have to wait 20 minutes before trying again!?! I am trying to find a means of improving this and have a few thoughts on how:<ol><li>Close the license being used (and make available to somebody else) once the report is created. We generally do not have 20 concurrent users at any time but in a 20 minute time span we can have over 20 report requests. </li><li>Shorten the time before the license becomes available again (like to 5 minutes) Long enough for even the larger reports to run, but short enough that the chances of 20 reports being requested in a 5 minute period is slim. </li><li>Save the License use for that particular USER for the period of time (so if they open 1 or 10 reports it all utilizes the same License). This would work fine because it's a small office of just over 20 users and the chance of everybody accessing reports in that same 20 minutes is very low. </li></ol> If anybody has any ideas, suggestions, hints, or "it can't be done" I would greatly appreciate it! We haven't found anything in the RAS settings and I haven't found anything that effects the LICENSING in .NET (and using Report.Close() does not free up the license). Thanks,~Drew 

Alright, I seem to have some success in fixing this issue, though it isn't the 100% best solution. I create the ReportDocument in the Global.asax.vb file 
<blockquote />Dim crpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument Session.Contents.Add("crpt", crpt)</blockquote>and then I re-use this in the page that exports the file to PDF and displays it. Since this is created as a session-level object in Global.asax.vb I reference it in the display page as Session("crpt") and I clean it up by the end of the page but I don't make the session object into nothing.<blockquote>If Not IsNothing(Session("crpt")) Then<blockquote>Session("crpt").Close() System.Runtime.InteropServices.Marshal.ReleaseComObject(Session("crpt"))</blockquote>End If </blockquote>Then on Session End in the Global.asax.vb I clean up the Session variable and call the garbage collection.<blockquote>If Not IsNothing(Session("crpt")) Then<blockquote>Session("crpt").Close() System.Runtime.InteropServices.Marshal.ReleaseComObject(Session("crpt")) Session("crpt") = Nothing Session("crpt").Dispose()</blockquote>End If GC.Collect() </blockquote>It seems to be working at this time though there is the limitation that now everybody who enters the web application gets an object whether or not they are going to run reports. The more ideal situation would be for the object to not be created until the user enters the report page or have the page that creates/displays the report to check if the object exists and if it does not to create the object.

I have a desktop pc with iTunes. I just purchased a mac air book. Can I sync all of my devices, iPhone, iPod, iPad, to both computers or do I have to pick one. I would like to have iTunes on my mac, but I'm afraid I will run out of hard drive space.

I have a desktop pc with itunes. I just purchased a Mac Air book. Can I sync my devices, iphone, ipod, ipad, to both computers. Or do I have to pick one? I would like to have itunes on my mac, but i am afraid I will run out of hard disk space. Do I need to set up a seperate account on my Mac so I can load some music on it if I plan to keep my devices synced to my PC? Would it be possible to sync only my Iphone to my Mac?

To get that much storage, you need to look to professional online services. Pro-level hosting accounts may offer you that much (well, many will offer as much storage as you are prepared to pay for), or Amazon professional cloud services. You could also store the files on a home machine and pay for a professional hosting service so you could stream them over your own account (assuming your ISP connection and agreement allows for the bandwidth used). You would still need to deal with the issue of finding an app for the iPad that supported avi streaming.

[Urgent Issue] Msgstore running out me of my GPRS ...

Similar Messages

Maybe you are looking for