Urgent: Layout problem in "light inner page"

Hi Experts,
I am facing a problem in portal content area on external facing portal. I see a vertical scroll bar which restricts application from being displayed on entire screen.
I am getting this problem after a patching of EP 7.0, before patching every thing was running fine.
To me it looks like a layout problem in "light inner page", When I use "Light - 1: column (Full width)" layout I get a vertical scroll bar on portal. When I use default layout then this vertical scroll bar disappears but I see an empty navigation bar on left side which is not required.
Can some one advise a solution for this.
-Lave

hi,
Similar problem in this thread. check it out
Desktop inner page lost
Regardss,
Ganesh N

Similar Messages

Oracle reports Page layout problem in HTML

Hi,
I am Using Oracle Reports6i to create my web reports. I found some problem with my reports page layout.
When I print my report from browser which is generated in html, it prints my first page's page number in begining of my second page and it continues in all pages disordering the report.
When I try to print from report builder It prints perfectly.
I want to know how do I control my page layout in html without asking user to set anything in browser each time they print.
Please try to help me with this.
Thank you
Regards
Rajesh Sharma
null

dear rajesh
i was also facing same problem,try these things it may help
change the desformat=htmlcss
destype=file
and desname=(name of file where
u want the output) ex. c:\pi.html
after that open that file i believe it wiil be alright,pls confirm me at [email protected]
bye
null

Problem in EP while changing the layout of the default portal page

i am working with EP7.in this i encountered a problem when i tried to change the layout of the default framework page.
i created a new layout in NWDS and uploaded it to portal.then i copied the default framework page to separate folder (my personal) and assigned the newly created layout and set that page as my default framework page.
but whenever i log into the portal or refreshes the page the top level navigation iview merges (overlaps) with the masthead iview and comes back to the assigned position after some time.i tried many ways to solve this problem but i couldnt.
if anybody have any idea about it please share.....
regards,
karthick

Hi tamilventhan K
Please have a look at SAP Note No. 687485.
Hopefully this should solve your problem.
Cheers.
Award points for helpful answers:-)

About Default Framework Desktop Inner Page refresh Problem

In the Default Framework's Destktop Inner Page's Detail Navigation , When I click a link , It's refresh whole Desktop Innerpage page.
Now I not require refresh whole Desktop innerpage . I'm only require it's refresh content page.
How solve this problem?
Thanks.

Hi Yanjun,
The behavior of a lot of features depends of the framework. Please check first the framework comparison document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3050a9ef-2848-2a10-1e93-bcc432c00c84
Also check isolation method of IViews, mainly URL isolation method (it may help you):
http://help.sap.com/saphelp_nw70/helpdata/en/97/0be13dc2fd605ae10000000a11405a/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/b5/8d977463334342be192228d2824fe1/content.htm
Reward points if itu2019s helpful.

Design/Layout Problem in OOTB SP "Docs I'm following" page

Hello
The "Docs I'm following" My Sites page in SP 2013 has the following layout problem:
Long document titles overlap with other elements (see also screenshot).
Note: This is default SP, i.e. we have not deployed any custom branding.
I guess this is a problem which can easily be corrected even without having to wait for a SP update. Since I'm not very good with design changes I would be grateful if you could provide
us with a quick fix, e.g. an updated css file.
Thanks a lot.
Best regards
John

Hi ,
For your issue, you can add the following code into your MySite MasterPage:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$(".ms-contentFollowing-itemTitle a").each(function(i){
$(this).text(shorten($(this).text(),32));
function shorten(text,maxLength) {
var ret = text;
if (ret.length > maxLength) {
ret = ret.substr(0,maxLength-3) + "...";
return ret;
</script>
Best Regards,
Eric
Eric Tao
TechNet Community Support

Problem with Absolute Navigation (External Window) and Light Framework Page

Hi All,
We are using Light Framework page for the portal devolopment. We have an application including two webdynpro iviews where absolute navigation is used to traverse from first iview to second iview (When user clicks a button on first iview). We are showing the second iview in external window (SHOW_EXTERNAL). When ever i clicks the button to traverse to second iview, i am getting an exception.
When we are showing it in same window (SHOW_INPLACE), it is working fine. But the iview is appeared in half of the page with scrollbars. It is working fine with default framework page (with both options SHOW_INPLACE and SHOW_EXTERNAL) and dispalyed in original size as mentioned in iview properties.
Could you please suggest us whether there is any work around for this.
Thanks,
Sudheer

Hi Kathiresan
I couldn't see the address bar of the window (In which second iview is getting displayed). But i can observe no parameters that i passed from first iview is visible in the view source of the second iview (When SHOW_EXTERNAL is used in absolute navigation). I could see all the parameters in the view source (when SHOW_INPLACE is used for absolute navigation). But i am using the same url for both the options (for SHOW_INPLACE and SHOW_EXTERNAL).
I doubt about the url being passed when SHOW_EXTERNAL option is used. But when we checked in debug, The correct url is being triggered (Atleast from first iview). Is there any way that could display the second window with address bar. What is making difference between SHOW_INPLACE and SHOW_EXTERNAL with absolute navigation and light framework page.
Could someone please suggest.
Thanks,
Sudheer.

NW2004s SPS10: color issues wirh light framework Page

Hi,
we're using NW2004s SPS10 and the light framework page. Everything works fine except for the following two issues:
1.) The color for the personalisation link in the masthead is not the color we've defined in the theme editor. Example: http://img214.imageshack.us/img214/9967/image1ub0.gif As cou cann see, the link is displayed in in the default color for links (blue). How can we change the color?
2.) The color for the commands in the page title bar doensn't match our requirements. How can whe change the color? Example: http://img440.imageshack.us/img440/1060/image2be9.gif
Thankds in advance
Best regards
Thomas

Sravanth wrote:
Hi All,
I'm facing a problem regarding changing colors in a OA Framework Page. We are using Apps R12. with OA Framework component 12.1.1
There are 2 urgent Issues for me
1. To change the Color of the Header Component(Presently it is in Light Blue Color) and To change the Image on the top of the Page(The Image which stands as a back ground for Oracle Logo)(Thick Blue in color)
only the look and feel of the External Site Visitor Page must be changed. All the other pages should be having the default look and feel of oracle
Can any one suggest me on how to achieve the required output...
Thanks and Regards,
S K SravanthHi Sravanth,
Take a look at Atul's blog entry for this, he has documented it nicely.
Thanks
Shailendra

Change the Light Framework page width

Hi Experts,
I have a requirement that I need to change the Light frame work page width like the latest SDN site.
Instead of expand the portal page to full window I want to align to the center of the window.
Just I want similar to the latest www.sdn.sap.com .
I tried with the com.sap.portal.layouts.framework.par. Can any one know where I need to change doe width?
I am trying to align light frame work page with the 3 column (Narrow:Width:Narrow) layout.
But, getting Desktop inner page part to right align.
Thanks
Venkat

Hi Venkat
check this blog it may help you
Tag Libraries: Creating a new SAP NetWeaver Portal framework page
Thanks,
Tulasi

Problems with light detailed navigation

Hi there,
We have the poblem that the light detailed (3rd level) navigation is missig for four users. When I login with one of these users, the complete left plane is empty. If I login with a different user with the same role, then the navigation is working as usual.
Anyone who had a similar problem?
Regards,
Manuel

Hi,
This can happen when the users have different Desktops and in the Framework page the detailed navigation Iview is not added/invisible.
Check the portal rules to know about the Desktop used by the users and make sure that the framework page contains detailed navigation Iview inside the Desktop inner page.
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/0d8da285314067b5a4976219a07dee/frameset.htm
Greetings,
Praveen Gudapati
[Points are always welcome for helpful answers]

CSS Layout Problem?

Can someone please help me with a layout problem.
As far as I can tell the page looks as it should in Netscape,
Firefox, etc., but IE6 and 7 refuse to work correctly.
The page I am working on is:
http://www.vmtampademo.com/localangler/testpage.html
Most of the picture caption and headline of the middle column
is behind the picture. I attempted to force the info with a
seperating div which seems to work sometimes. I doubt that this is
the correct solution. What am I doing wrong?
Thank you for the help!

It looks fine in Firefox 2.0.0.1, Opera 9.10, and IE 7.

Add to favourites disabled when using light framework page

Hi,
When using the light framework page our "add to favourites" link is disabled. If we instead use the normal framework page add to favourites in the dropdown menu works. Does anyone have an idea why this could be?
Regards
Mattias

Hi,
The reason why I decide to use Light Framework, itu2019s because Iu2019m creating an EFP, and Iu2019m using the WPC to publish the content (articles, news, and link list), using the standard Web Forms.
The problem is, after adding to a WPC Page something so simple like an article (using the Web Form Article), no Portal iView, HTMLB or other stuff included, the preview of the WPC Page using the Default Framework Page is ok, but when using the Light Framework Page, the text in the article doesnu2019t have the correct font-family. It looks like there are some styles missing in the Light Framework Page, that WPC content is expecting.
Thanks and Regards,
John

Custom Light framework page

Dear All,
I am planning to develop custome Light framework page with Masthead, Tool area (search) , TLN, DTN and content area
is there ant ready framework pages i can use, examples prerequisites will help.
Regards,
Murali

Hi,
Check these blogs:
EFP: Working with the New Taglibs - Part 1
EFP: Working with the New Taglibs - Part 2
EFP: Working with the new Taglibs - Part 3
Nuts and Bolts of the External Facing Portal (EFP)
EFP: Layout Tag Library
EFP: Navigation and Framework Tag Libraries
Regards,
Praveen Gudapati

Performance Light Framework page and R/3 transactions

Hello,
I have a customer running an enterprise portal 6.0 containing basically R/3 transaction iViews.
Some of the users of this solution are using fairly low bandwidth and are complaining about performance problems.
My question is whether there is anything to gain from switching to the light framework page, or is the loading of the R/3 transaction the main bottleneck.
Has anyone made an estimate of the performance gains obtained by using the light framework page over the standard ones?
I have just found one such estimate on this forum, indicating a size improvement of almost a magnitude of 8 (100K vs 800K) (thread: portal performance optimization over low speed links)

Here is the text that explains the disappointing restriction in the release of External Facing Portal with KM in NW04s SP5 and NW04 SP14.
NOTE 709354 relevant snippet below>>>>>>>>>>>>>>>>>
Release with restrictions
Knowledge Management in external facing portals
Knowledge Management is released in a restricted way for scenarios where the external facing portal capabilities of NW'04 SP 14 are used (i.e. reducing the network load by using the 'light framework page' concept of the portal): - KM iViews will work within the light framework page without erros. However, the network load will not be decreased since the navigation within the KM iViews requires the full range of scripts to be downloaded from the portal. - Browser Back/Forward navigation within KM will not work in all cases - Indexing of KM content by external search engines (Google, etc.) will not work on all content In addition, the general usage of KM in scenarios where untrusted (e.g. with a self-registered user ID) or anonymous users are accessing an external facing portal is recommended in a restricted way only to avoid upload of malicious files or code (e.g. disable file upload or discussion forum entries). This recommendation is true even if the 'light framework page' concept of NW'04 SP14 is NOT used. For more information on how to enable KM (and Collaboration) for anonymous users, please refer to the following notes. SAP NetWeaver '04 SP11 and below: Note 728106. SAP NetWeaver '04 SP12 and higher: Note 837898.
( Changed at 23.12.2005 )

Layout problem - multiple repeating frames

Hi, I have a layout problem, pls help!
Short report description:
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
- - - - .. other repeating frames ..
When reaching the bottom of a page, and there is not enough room to print a record for Repeating frame 2, a record from Repeating frame 3 is printed in the bottom.
Next page starts with the remaining records from Repeating frame 2.. and then the remaining records from Repeating frame 3.
For example:
Page 1:
Rep frame 2 - Record 1
Rep frame 2 - Record 2
Rep frame 2 - Record 3
Rep frame 3 - Record 1 -- not enough space to print Record 4, so this record is printed
Page 2:
Rep frame 2 - Record 4
Rep frame 2 - Record 5
Rep frame 3 - Record 2
How can i ensure that all records from Rep frame 2 is printed before records from Rep frame 3?

Hi, thanks for helping me out!
I tried to use anchors, but they had no effect when connecting top of 3 to bottom of 2, got the same layout.
I then tried to create frames with vertical elasticity expand around both rep frame 2 and rep frame 3, and it seems to do the job.
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Frame 4 - vertical elasticity expand
- - - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Frame 5 - vertical elasticity expand
- - - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
and so on..
Thanks again

Div layout problem

Hi - stuck on what I think should be a fairly basic layout problem:
I have 2 divs, equal widths but varying heights, one floated to the left and one to the right so that they appear next to eachother on the page. The one on the left contains varying amounts of text, the one on the right contains a flash player so never varies.
Where the text for the left div is long, I want it to start off next to the player, but then flow beneath it rather than continuing downwards at the same width as the div. If I remove the width of the left div, so that it reverts to the container width, the player div positions itself below it, so I can't work out how to get the effect.
Can anyone help?

Hi,
hope I understood in the right way: I used (translated from German DW) "modify table" and so I got one more row and two columns in your Main_Content. In one of the new columns I copied the image and beneath I took the text (you now can replace with image and text of your choice), like this:
If that's not a help for your question, please ask me again.
What concerns the width of the pictures, I would format them with PS or a similar program in the same wide.
Hans-G.

Urgent: Layout problem in "light inner page"

Similar Messages

Maybe you are looking for