URGENT: Problem with the viewlink

Well the problem that I am facing now is with the newly created ViewLink. Let me explain the current situation. I have two viewObjects (say view1 and view2). These viewobjects are independent. I have used these viewobjects in one jspx page. Now I newly created a viewLink (say viewLink1) , making the view2 dependent on view1. I have added viewLink1 to the application module. But there has been no change in the data being generated on the jspx for the view2. Do I need to undo the previously used view2 and use the viewObject that has been newly generated under the viewLink in the DataControl Palatte? Is there a way through which I could make the independent viewObjects communicate without undoing the previously done things?

Thanks for your reply John. But I couldn't get the required solution. Let me explain the problem more clearly. I have 2 viewobjects. Initially i used both the viewobjects without any viewlink . I din't want the two viewobjects communicate with eachother. But now due to requirement , I had to create a viewlink between the two viewobjects ( I have mapped a common attribute of both the view objects in the viewlink). So now when I select a particular row in the first viewobject, it has to reflect the data in the second viewobject (since I created a viewlink). But this is not happening (since I am not using the viewobject under the view2 via view1 viewlink). The data in the second table is getting reflected if the used the viewobject under the view2 via view1 viewlink. But this requires me to delete the existing table which uses the view2 object and replace it with the viewobject present under the view2 via view1 viewlink. Is there any possible way through which the I could make the viewlink work without deleting the previously created table ?
Thanks for your immediate response.

Similar Messages

URGENT: Problems with the CREATE JAVA command in SQL

I am trying to publish a Java class to the database and have to use CREATE JAVA rather than loadjava for reasons I won't go into.
However, I get the following error:
SQL> create java class using bfile ('C:\neil', 'SkyNetworkRequestUtil.class');
create java class using bfile ('C:\neil', 'SkyNetworkRequestUtil.class')
ERROR at line 1:
ORA-22929: invalid or missing directory name
I can assure you that the C:\neil directory exists and the class exists in that directory, so what am I doing wrong?
Hopeful thanks in advance.

Did you try using C:\\ instead of C:\?
If this does NOT work, then go into the directory where you have your .class file and
use '.' as the directory specification.
Hope this helps.

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

Very urgent!! Problems with the H.263 codec on JMStudio

I downloaded the JMF Version 2.1.1e ' version.
The H.263 codec doesn't work.
I noticed that the file sound.jar wasn't in the lib directory of JMF-2.1.1e.
Is for this reason I have problems with the H.263 codec??
Thanks for your help.

What do you try to broadcast? H263 is a video codec, not audio..

URGENT!!! Problems with the last version 14.2.1

Hello, I have a problem with the latest update of PS CC two iMac in the company where I work, is that updated to the latest version and have recurring problems, for example, when using the Transform an object tool, the object changes, shown with noise or change the opacity and you can not edit, or also adding some other effect is the result: a distorted image. I think that's the latest update of PS because I have no such problems, because even I do not upgrade to version 14.2.1. Please I need your help, as our work at the agency is compromised with the delays that this causes us. Greetings and thanks! I'll be waiting for an answer.

Lo siento mucho, aquí va el problema en español:
Buenos días, tengo un problema con la última actualización de PS CC en dos iMac en la empresa donde trabajo, resulta que actualizaron a la última versión y tienen problemas recurrentes, por ejemplo: al utilizar la herramienta Transformar en un objeto, éste objeto cambia, se muestra con ruido o cambia la opacidad y no es posible editarlo, o también agregando algún efecto el resultado es otro: una imagen distorsionada. Creo que es por la última actualización de PS ya que yo no tengo esos problemas, porque aún no actualizo a la versión 14.2.1. Por favor necesito su ayuda, ya que nuestro trabajo en la agencia se ve comprometido con los retrasos que esto nos ocasiona. Saludos y gracias! Estaré a la espera de una respuesta.
Muchas gracias!!!

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

Urgent problems with image viewing on my 20 inch Cinema display???

I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

[Castor] Problem with the namespace

Hello,
I'm using Castor for generate XML file with Java Object(generate with Castor with XSD).
I have a problem with the syntax and particulary with the reference of the namespace.
I obtain this :
<?xml version="1.0" encoding="UTF-8"?>
<TEST ID="">
<ns1:PERSON xmlns:ns1="http://www.w3.org/a/">
<ns1:CALCUL>
<ns1:SOURCE>RED</ns1:SOURCE>
<ns1:TIMESTAMP>2004-10-27-11.38.25.237113</ns1:TIMESTAMP>
</ns1:CALCUL>
<SIREN>666</SIREN>
<ns1:DOSSIER>
<ns1:TYPE>DN</ns1:TYPE>
<ns1:IDENTIFIANT>333</ns1:IDENTIFIANT>
</ns1:DOSSIER>
</ns1:PERSON>
<ENTITY>
<COMMON>
<ns2:ENTITY_ID xmlns:ns2="http://www.w3.org/a/">602449226</ns2:ENTITY_ID>
<ns3:RATING xmlns:ns3="http://www.w3.org/a/">NDE</ns3:RATING>
</COMMON>
<SPECIFICS_DATA>
<ns4:RATING_FC xmlns:ns4="http://www.w3.org/a/">2-</ns4:RATING_FC>
</SPECIFICS_DATA>
</ENTITY>
</TEST>
but I'd like to obtain :
<TEST ID="">
<PERSON >
<CALCUL>
<nSOURCE>RED</SOURCE>
<TIMESTAMP>2004-10-27-11.38.25.237113</TIMESTAMP>
</CALCUL>
<SIREN>666</SIREN>
<nDOSSIER>
<TYPE>DN</TYPE>
<IDENTIFIANT>333</IDENTIFIANT>
</DOSSIER>
</PERSON>
<ENTITY>
<COMMON>
<ENTITY_ID >602449226</ENTITY_ID>
<RATING>NDE</RATING>
</COMMON>
<SPECIFICS_DATA>
<RATING_FC >2-</RATING_FC>
</SPECIFICS_DATA>
</ENTITY>
</TEST>
"http://www.w3.org/a/" is the namespace reference in the xsd, here the begin of the xsd:
<xs:schema xmlns:FIN_Referential="http://www.w3.org/c/" xmlns:Rating_Referential="http://www.w3.org/f/" xmlns:Global_Referential="http://www.w3.org/a/" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
To marshall I use this code :
StringWriter fluxXmlSw = new StringWriter() ;
Marshaller mar = new Marshaller(fluxXmlSw);
mar.marshal(Test(),fluxXmlSw);
//Test() is the root element of the file xml
I hope somebody could help me, it's urgent I solve this problem.
Thanks for all responses

just a thought..... did u try removing xmlns:p1="http://ofcom.co.uk/unify/CustomerMaster" from your WSDL file ?
Try to remove that and proceed in your development.

Hola i have a problem with the dowland of adobe, say fault 1 help me please

hola i have a problem with the dowland of adobe , say fault 1, hepl me please, urgent, than you

Please post only one message... I deleted your duplicate
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

URGENT: Problem with the viewlink

Similar Messages

Maybe you are looking for