URGENT : Really need Nokia's help on this one... A...

Good day!
I am using my Nokia N70-1 for both of my personal and business matters.
This morning, I saw a warning on my phone regarding an operation it couldn't process:
It goes like this:
"Telephone: Not enough memory to perform operation. Delete some data first"
I checked the memory of my phone through its settings and saw that I already consumed all of its available memory which is 21MB.
I have no music tracks, videos, etc. on my phone.
Only messages and the phonebook.
I already deleted so many files this morning.
But the memory of the phone still indicates that there are no longer available memory space.
Now it started again to say to delete some data but everytime I try to delete some files, the warning message keeps on appearing and interfering the process.
I cannot delete the files.
Worst, I cannot accept and send messages.
What should I do?
Thank You!

You need to find out what is taking your memory up.
I would recommend that you power the phone down and take the battery out of the phone for 1 minute.
Put it back in and power the phone back up. *DO NOT DO ANYTHING ELSE*
Once the phone has powered up, access the Menu and go to the following location :
Menu->Tools->File Manager
The first bit you see at the top will have an icon of a phone - this represents the data you have stored on your phone.
Select Options->Memory details
and this will give you a breakdown of exactly what is taking up all the space on your phone. From here you should be able to access the relevant section of the phone to free up some space on your phone.
If for whatever reason you're unable to use the phone after powering it off and back on, then the fail safe way to get this working is to wipe your phone to the factory defaults which means that it will behave as if you had just taken out of the box when you bought it.
The downside to this is that you lose *ALL* the information you have stored on it - messages, contacts - the lot.
Information on how to do this can be found here :
/discussions/board/message?board.id=smartphones&message.id=4007
However please be aware that doing so will wipe ALL the data from your phone such as information in your calendar, contacts and so on.
You could try and save the information you currently have on your phone first by downloading PC Suite and backing your phone up - you can find PC Suite here :
http://www.nokia.co.uk/A4144905
Hope this helps.
Regards,
Edward

Similar Messages

Need some expert help on this one

My PPC 10.4.11 mac is running very very slow with plenty of disk space and when I try to verify permission, repair permissions etc. disk utility freezes up to the point where I have to cold shut off the computer. Issues started yesterday when a page in iweb became corrupt causing me to have to completely redesign my index page and then it started freezing up. Do I just need it do an achieve and install or is there something else I can do?

As your very expert help already mentioned, You must repair the HD.
If Disk Utility cannot do it then your best bets are DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
But you need the CD, the download won't work unless you have another Bootable HD.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Do you really need the shoes to make this product work?

I just saw some information on the TV about this. My question; if anyone can help with it, is do you REALLY need the shoes to make this work. I mean all it is is a little disk and a wireless plug-in for the Nano. It would really help me out if someone can tell me.

You do not need the shoes to make it work. Check out this thread for ways people have gotten the sensor to work with non-nike+ shoes: http://discussions.apple.com/thread.jspa?threadID=559827&tstart=75

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

It just doesn't work and help is needed, hence why I'm on a Forum? Brownie points for whoever can help on this one...

So. As always, it's about iTunes - as Apple is the most inconvenient corporation ever founded. Anyway! I've had this problem for about 6 months and haven't bothered to ask anyone. I've restored the computer numerous times and tried to fix the issue with help from other nonsensical forums. The problem is that 'apple mobile device service' is eating up a large amount of CPU, and therefore tends to make the computer run like a log. I have uninstalled it before but then iTunes won't recognize my iPod - funnily enough. As well as this, iTunes won't connect to the store? However, it doesn't say it's not, it just doesn't load. It states that it is 'accessing iTunes store', but it's not. I'm running all of this on a windows 7 Acer extensa 5235 - just in case that helps. It probably won't, but you guys are clever, right? I mean, I could probably ask you to peel an orange for me, and you'd do it without even physically touching it. Just with the power of your omnipotent minds. Anyway yeah, if anyone can help on this one, would be much appreciated.

Wow what a rambling mess and complete waste of time.
Did you try a search of the forums for similar issues? Doing so would have revealed multiple similar issues with valid troubleshooting, saved you time, and saved those that have read that crap from being subject to your rambling psychosis.
FYI, in the future, get to the point and cut the crap when asking for help.
Oh, completely uninstall iTunes and reinstall the current version of iTunes.

I have problem with my iphone 4s my battery is not keeping charge. how can I get help with this one. it is less than a year that I purchased this cell.

I have problem with my iphone 4s my battery is not keeping charge. how can I get help with this one? it is less than a year that I purchased this cell.

I would like to know the answer to that one. I realized this was happening just after upgradeing my iOS to 6. Then when I looked up my purchase date, I was about 5 days past my one year warranty. So I'm dead in the water. Apple will replace the battery, but it will be about $80+. I took it to the Apple store, and they checked a bunch of stuff, but said that it seemed ok. I'm debating getting a battery for a more reasonable price off of ebay. But if it's the iOS thats draining the battery, then I'm not going to be able to help it. I wish I knew a better way to tell if its the battery, the phone, or the iOS.

Startup Screen Pixelated - I really need help on this one.

15" Macbook Pro - Spring 2011
My startup screen sometimes would be pixelated with the Apple logo and then would go to grey screen and do nothing... then I would be forced to shut down and power it up again. On two occasions, the bootup would have stripes on it. See photo.
And then the occasional lockup while working on something would happen and I was forced to power it down. This would happen periodically and not every day.
So... I had this problem a couple of months ago (for several months) and the Apple store kept my Macbook Pro for a few days and said there were reported no problems. They were clueless as to why I had the above screen show. They said... maybe it is a bad installation of the OS and that it got corrupted.
So a couple of months later and I am now I am having the same issues again. But this time, I had bought another HD and installed Mountain Lion on it... and I have it connected via USB. I had used it several times before last night when I held the option key down to choose my startup disk to be the new HD via USB. Then I get this pixelated screen again, but this time it was at the startup disk screen. See Photo.
It's like you have a car problem and you take it in to the shop only for it to not malfunction... I really need some guidance on this one. My AppleCare warranty just expired (was valid during my visit to the Apple Store)... And I am not a happy camper... I always use macs... and I teach everyone who has them how to use them.
So to be clear... This is the same internal HD that I had when I took it to the Apple Store. (Lion)
I installed Mountain Lion on a new HD connected via USB and have worked off of it for a few days with no problems, choosing it as a startup disk.
Last night booting with the option key held down I get this pixelated screen, whereas before it was never pixelated holding the option key down.
So I have a couple of questions:
Is the Boot Screen above run by the motherboard or the HD? If it is the MB, then I need to talk with Apple again.
Does anyone have any clue what is happening?I have reset my PRAM and switched out my RAM.
If this screen is run by the same HD in the laptop, then maybe I just need to take it out....?
I would appreciate any genius expertise. I am a little frustrated that I am having this problem and cannot narrow it down. I use my laptop extensively for presentation, graphics, and teaching and now I am afraid of it.

Your 10.7 EFI may be corrupted.
The way a Mac works is EFI is updated via Software Update, it's written to the OS X partiiton, then gets loaded into the hidden EFI partition and read/used upon the second boot.
So it takes two reboots to load EFI and goes into the EPROM boot memory.
My terminolgy might be inaccurate as I didn't take a Apple course for certification, but I understand a little about the boot stage from my Linux on Mac experience.
If your 10.7 EFI is corrupted on one drive, and you've got a 10.8 clean EFI on another, then it takes two reboots from the same drive to clear and use it's EFI into boot memory.
So if you've booted 10.7, then option booted to use 10.8, it could be the corrupted 10.7 EFI still in memory.
The way to fix the corrupted 10.7 EFI partition is a total wipe and format of the entire drive to catch the hidden EFI parition, then install 10.7 fresh and update.
Of course Apple made this difficult with Recovery Partition which won't allow a complete drive erase.
However you can do this
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
There is also a way to install EFI firmware from a cd, however I don't know where it goes, reboot the 10.7 drive twice anyway
https://support.apple.com/kb/HT1237
http://support.apple.com/kb/DL77
Since your out of warrantly, you might want ot just go ahead and repalce the internal drive and see if that fixes the problem.
http://eshop.macsales.com/installvideos/

I really need help on this one.

Hello:
When I first purchased my iPod nano a little over two years ago, I was able to download my itunes which amounted to about 400 songs. The capacity of this ipod is 4Gb. I restored it and downloaded 46 songs. It shows that I have only 1.5 Gb left. This doesn't make sense to me because it is much less than what I had before. Even with 400 songs, I had about 1.5 Gb left when it was new. It seems to me something is wrong with the ipod as it doesn't seem to be compressing. Anyone have any ideas about this? Is there a program that I am able to download to solve this issue? Thank you for any help you can give.
Best regards,
Mel or zzmel

Thanks for your response. I don't know what the bit rate is. When I first got the nano, I was able to download in compressed format. For some reason I am unable to do that now and the few songs I have eats up a lot of memory. I have the latest iTunes and I tried to look into the options to see if there was anything that indicated compression. I could not find it. I have tried resetting the nano and cleared everything out. I again tried to transfer my library and the indicator showed that I have used about 1.5Gb and leaves me about 1.7Gb. I only have 42 songs on my nano. I wont even have 100 songs which will use all the memory or 3.7Gb. I must be doing something wrong and that is why I am seeking help. This never used to be this way. Thanks for your response.
Mel or zzmel

REALLY need help on this one... befw11s4 w/ Xbox 360

My system 2 PCs hard wired. 2 Printers wireless. Running XP. Also have Directv DVR and Xox 360. Everything used to function correctly. Now DVR and XBox wont connect to BEFWS11 V2. I have reset everything and started from scratch. I have also disconnected everything from the LAN expect PC1 and Xbox. The router appears to give it and IP address (shows up in DHCP table and on Xbox) BUT 1- when I ping the address from my PC no response. 2 - when I run the test from XBox is says it gets IP address but can't see my computer. I see very similar behavior from the DVR. I did not change anything drastic that I am aware of. I am at a loss - any experts out there. I have turned off firewalls - no help. This used to work and now does not. On the Xbox I can't get either media sharing or Live to work. I can get ping responses from 2 PCs and 2 printers on the netwrok, but not Xbox...
I am stmped - any help out there?
krammer

Try assigning Ip addresses manually to the devices and check if you are able to communicate or not.

Really need a small help

Hi Java Guru,
i hv problem getting all the list box value.I hv read many forum posted by others but solutions seem not working.
below got 2 files code. test.htm will show all list box value and when onsubmit will call list() to change list box all value to "selected" so test.jsp can receive all list box value.
unfortunately, i can receive the highlighted list box value only on test.htm.
i really need some help!!!!
thanx first.
test.htm
========
<FORM NAME="formName3" onsubmit="list()" ACTION="test.jsp">
<SELECT NAME="selectName" multiple onChange="onChange(this.form)" size="3">
     <OPTION VALUE="1" SELECTED>PartNameA
     <OPTION VALUE="2">B
     <OPTION VALUE="3">C
     <OPTION VALUE="4">E
     <OPTION VALUE="5">F
     <OPTION VALUE="6">G
</SELECT>
<SCRIPT LANGUAGE="JavaScript">
function list()
for(i=0; i < document.formName3.selectName.length; i++)
{document.formName3.selectName.options.selected = true;   }
</SCRIPT>
<input type="submit" value="Submit" name="B1">
</form>
test.jsp
========
<%
String[] values2 = request.getParameterValues("selectName");
System.out.println("values length:" + values2.length);
if( values2 != null && values2.length > 0 )
for( int i = 0; i < values2.length; i++ )
out.print( "value " + i + ": " + values2[i] + "<br>" );
%>

1. jsUnit -- JavaScript unit testing tool akin to JUnit.
http://www.edwardh.com/jsunit/
2. Venkman -- A surprisingly sophisticated JavaScript debugger.
http://devedge.netscape.com/viewsource/2002/venkman/01/
As for an editor that checks JavaScript syntax the only one I know of is SlickEdit but it is very expensive.
Intellij IDEA is supposed to have this feature in a future release.

I really need some serious help with Encore import

Ok I will start off by saying Iam a complete and total newbie to this field. I have produced a few small projects in premier and encore but nothing advanced until now.
Here is what I have done
I am using CS04 Suite
I have built a Premier Project using AVCHD footage that is 2.5 hours long (roughly)
I exported the final project using AME to H.264 so that I could import it into Encore
The files is 16 GB in size
I am trying to import the file as an asset into encore to build the menus, I need to create 2 images in encore, one DVD image and 1 Blueray Image. I am trying to do the DVD image at this time. Encore allows the import, shows the video in the asset list but my hard drive has been running like a fool for 3 hours now, I cant seem to drag it to the timeline, if I right click I cant even access the Transcode setting of the file, my system is very sluggish. It almost seems like it is pre-transcoding but I see no progress bars anywhere.
Is Encore simply still importing the file?
Am I doing this correctly?
Should I break up the video into smaller files? Will I need to create multiple Premier Projectes to do so?
If I wait long enough will it be ok?
I have 6 days to finish this project... I really need your help !!!

An external ESATA would do just fine.
Keep all of your media on the external drive. Only use the internal drive for Windows and your applications.
Your quad-core and 4 GB of RAM is OK. Not great (I'd get 2 GB of RAM per core), but OK.
-Jeff

Please i really need a big help hare. hp lj1300 driver for win 7 32 bit and 64 bit printer driver.

hi every one please i really need halp hare i have a hp LJ 1300 printer and i have been trying to install it on window 7 (32 bit and 64 bit). i have been looking for the LasarJet 1300 printer driver but i have not seen any. i even down loaded form hp web site. but it still did not work. after installing when u go to the divice mannger its showing the printer driver not found and then its not even printing. am using a usb and a laptop. i really need this driver for window 7. so i could get my work done. please some one help me hare.

Hi:
This 32 bit Intel graphics driver should work...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23884&lang=eng&ProdId=3719

Error 1603: Need some help with this one

When installing iTunes I first get an error box saying
"Error 1406: Could not write value to key \Software\classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel."
The second one (after I click on Ignore on the last box) I get it this one:
"Error: -1603 Fatal error during installation.
Consult Windows Installer Help (Msi.chm) or MSDN for more information"
Strange thing is that I do have full access to my computer (or atleast in all other cases I have had since I am the only one with an account on it).
I have done my best in trying to solve it myself but I'm running out of ideas. I have downloaded latest versions from the website and tried installing Quicktime separately. I have also tried removing Quicktime using add/or remove programs though I just I didn't dare to take full removal because it said something about system files.
Anyway I really need some help with this, anyone got any ideas?
Greets,
Sixten
Windows XP Pro

Do you know how to count backwards? Do you know how to construct a loop? Do you know what an autodecrementor is? Do you know how to use String length? Do you know Java arrays start with index 0 and run to length-1? Do you know you use length on arrays too? Do you know what System.out.println does?
Show us what you have, there isn't anything here that isn't easily done the same as it would be on paper.

I'm not able to log into my gmail! If I sign in, it just flickers. I can use Facebook though. I really need gmail, please help! Thank you!

hello, I'm not able to open my gmail. I can sign but it does not open the Mail box, it only flickers! Please help, I really need gmail. Thank you!
Message was edited by: Amaingo

It's been reported that Apple's servers are having problems tonight. Just try again later.

URGENT : Really need Nokia's help on this one... A...

Similar Messages

Maybe you are looking for