URGENT : Releasing locks aquired after the session ubruptly terminated

Hi everybody,
When a record is edited the record gets locked.
If the session is ubruptly terminated (PC switched off, Network down or something like that) before the edited record is commited or rolled back and if the same record is accessed after loging on once agian "Cannot reserve record " message is displayed.
When will such locks get released?
Is there any way to make the record editable (releasing locks programatically)?
Thanks
Brijesh

The old session should clean up given time - How, depends of course if this is a Client Server Form or a Web Deployed Form.
If it is a web deployed form then the FORMS60_TIMEOUT (or FORMS90_TIMEOUT) will be used to determine how long to wait before cleaning up the process and releasing the locks.
If this is client server then it's a database configuration thing.
There is no way to manually release the locks of an orphaned session in code. The DBMS_LOCK package does have a way of releasing a lock, but I think this is only locks that have been taken out by dbms_lock itself, not a "normal" lock.

Similar Messages

  • I'm having problems upgrading from 10.6.8 to Yosemite.  My computer locks up after the download and installation process.  Does anyone know how I can overcome this problem?

    I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • How to redirect a JSP page after the session is killed

    Hello!
    I am quite new to JSP. I have a question about how to redirect a jsp page after the session is killed. Could anyone help?
    thanks a lot in advance!

    You can't, directly. There's no connection betweenthe server and browser.
    even after invalidating the session. we can do it
    directly using the statement
    response.sendRedirect("....");
    or we can use the meta refresh tag.if session is invalidated and if we try to do response.sendRedirect(".. ") it throws IllegalStateException

  • [svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

  • My iphone 5c locked up after the latest update how do I fix this

    My iphone 5c locked up after the latest update.  How can I fix that?

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.

  • How can I get my email and message notifications back on the lock screen after the 5.01 upgrade?

    After the 5.01 Lollipop upgrade I lost my email, text and voice mail notifications on the lock screen on my LG G3.  How do I get them back?

    Still didnt work...i dont know whats wrong.. i want them to look like this...

  • HT5192 has anyone else foud the security bug of the camera in the lock screen after the update to 5.1

    Hi
    has anyone found that you can get into an iPhone from the lock screen with the camera option. I have just upgraded and now have the camera option on the lock screen. you can go into the camera without the need of the pass code and then when in it press the home button to get into the phone. this is a big security problem, or am I alone of thinking this.
    thanks
    ally

    I have tried that a few times.  Also I can only get the phone to lock out someone after using the camera shortcut on the lock screen if the passcode is required immediately. If it is set to 1 minute you can still get into the phone and use it without the passcode.

  • How to download error records after the session method executed in BDC?

    Dear Experts,
    How to download errors in session method after executing session method. Please dn't say for BDCMSGCOLL  i have goggled all . every one answer for call transaction. In session method after executing we fill find all the success and errors in log file . But how to download this log file?
    please help me.
    Thanks
    Ravilla

    Hi Laxman,
    Please find the below process .I hope this will suits to your requirement .
    1)Write an error report.
    2)Send the record(s) in error to an error file.
    3)Create a BATCH input session with the record(s) in error.
      To store error MESSAGES ( CALL TRANSACTION )
        data:  begin of Tab_Mess occurs 0.
                  include structure bdcmsgcoll.
        data : end of Tab_Mess,
      CALL TRANSACTION ‘FK02’ USING BDC_TAB MODE ‘N’ UPDATE ‘S’
            MESSAGES INTO TAB_MESS.
           IF SY-SUBRC NE 0.
             WRITE: / Tab_MESS-TCODE, Tab_MESS-DYNUMB, Tab_MESS-MSGTYP , 
                            Tab_MESS-MSGID.
           ENDIF.
    Regards,
    Bharat Kumar

  • TS2570 Locked iPhoto after the installation of OS X Yosemite

    Hi
    After I installed OS X Yosemite my iPhoto got locked. I updated the iPhoto but still it has been locked. Every time I tried to open it I was asked to repair it but it failed every time and the error message was- "Caution... The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it.... OK" Does anybody have similar problem? Please help. Txs

    you try reinstalling the HP software?
    What HP software are you referring to?

  • I am trying to load "The Sims" for OS X 10.1 and higher;  first time the game would lock up after the preview, now I can't even get the installer to load after sending the original installation to the trash.  What could I be doing wrong??

    I have "The Sims" suite (The Sims, Livin Large, House Party, Hot Date, and Unleashed). During the original installation, I could not get teh third disk to install (House Party).  I definitely installed them in the correct order.  Then, I went on to load the last two CDs, but when I install the last CD, to begin play, the game locks my system downafter the preview. 
    I sent the entire Application to the trash (I'm assuming installing this in the Applications section of teh HD is correct), and tried to re-install.  Now, the initial Installer on The Sims primary CD will not respond.  I have to force quit to unlock the install.
    I have an iMac with the 3.06 GHz Intel Core 2 Duo, with 4 GB Memory (4 GB 1067 MHz DDR3).
    Can you tell me if I'm doing something wrong, or if my system does not have enough memory to handle this program?  I already have The Sims 2 and 3 with several expansion packs installed - never had a problem operating or installing them. I still have at least 50% of my internal memory available.
    Thanks,
    Joe

    For some reason SpeedGrade updated through the Application manager. I tried downloading the updates from adobe's website but it won't install. Prelude's update fails before it can even get started whereas the extension manager does install but it doesn't seem to be updating.
    I've done as much investigation as I can think of and I'd rather not create a new user just to check that out but if I have to I will. How exactly do I create a new user on a mac?

  • My ipad is locked up after the update on the osi software

    I started the software update today on my ipad and it has frozen up on me. I have plugged it into my laptop and it tells me that i need to unlock my device. THe screen that is is on is the upload screen with the apple on it. does anyone know how to fix this?

    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
     Cheers, Tom

  • Why after the new 5.1 update when the iPhone locks and sleeps the wifi goes what appears to be off and it 3G comes on?

    After the new update 5.1 whenever the iPhone locks and sleeps it changes from wifi to 3G.  Before the update whenever even in the lock screen the wifi bars were strong and seemed as if it's working even when the phones asleep. Now with the new 5.1 update in lock screen after the phones been asleep for a minute or two it shows 3G then like after 5 seconds or so the wifi comes on. 

    For some reason, today whenever I wake my phone from sleep the wifi seems to be running.  A few days ago when I first posted the 3G would be on then a few seconds later it would change to wifi.  Does this mean it's transferring data in my pocket all morning so far?

  • Wait until the session has been processed

    Hi folks,
    I have a report in which I create and trigger an SM35 session. I use RSBDCSUB report to do the same.
    Now, is there anyway to wait until the session has been processed? I mean, I need to do a few things in the report only after the session has been processed.
    Thanks
    Sagar

    Hi,
    You could try checking the job status (table TBTCO) inside a DO or WHILE loop.  To pause up to 5 seconds between your lookup on TBTCO, you can call function module 'RZL_SLEEP'. 
    If checking TBTCO does not work out for you, you can try the same loop logic with a call to function module 'ENQUEUE_BDC_QID' instead of looking up the job status.  If the enqueue has been released then the job has finished.
    Regards,
    James G.

  • How to track the session Logs ( SM35) in program

    Hi,
    I want to track the SM35 logs in my program. Using log information i want to move the filure records, Success records and warning  records spearately in my internal tabel.
    Based on that iinforamtion i want to analysis the records again for upload......Please help me.
    Thanks & regards
    Santhosh

    The actual requirment is, i want to get back the error records in my program.....My program is running in back end once the session is over i need to get the error files back to my program. That file i want to store in comman folder....
    after the session complet i want to get the error records in my program.....any bapi or functional module or methods is available for get the log information.....
    Help me....Please....
    santhosh

  • Lock held by a session not found in v$session

    See below a query I ran on v$locked_object:
    SQL> select xidusn, xidslot, xidsqn, object_id, session_id, process, locked_mode
      2  from v$locked_object where object_id = 27351;
        XIDUSN    XIDSLOT     XIDSQN  OBJECT_ID SESSION_ID PROCESS      LOCKED_MODE
             0          0          0      27351         91 1234                   3
            32          4     174461      27351        131                        3
             0          0          0      27351         22 1234                   3The session (sid 131) is locking the table (object id 27351) and blocking sessions 22 and 91. However, I cannot find sid 131 in v$session. I also get no result if I query for sid 131 in v$lock. There's a corresponding record in v$transaction with status='PREPARED'. How do I get rid of the lock or kill the session?

    Hi Chew,
    I think you need to refine your query.
    I have some notes here:
    http://www.dba-oracle.com/plsql/t_plsql_stats.htm
    The locked_objects.sql script uses the v$locked_object and dba_objects views to display all locked objects associated with each session along with the mode in which they are currently locked.
    locked_objects.sql
    SET LINESIZE 500
    SET PAGESIZE 1000
    SET VERIFY OFF
    COLUMN owner FORMAT A20
    COLUMN username FORMAT A20
    COLUMN object_owner FORMAT A20
    COLUMN object_name FORMAT A30
    COLUMN locked_mode FORMAT A15
    SELECT b.session_id AS sid,
    NVL(b.oracle_username, '(oracle)') AS username,
    a.owner AS object_owner,
    a.object_name,
    Decode(b.locked_mode, 0, 'None',
    1, 'Null (NULL)',
    2, 'Row-S (SS)',
    3, 'Row-X (SX)',
    4, 'Share (S)',
    5, 'S/Row-X (SSX)',
    6, 'Exclusive (X)',
    b.locked_mode) locked_mode,
    b.os_user_name
    FROM dba_objects a,
    v$locked_object b
    WHERE a.object_id = b.object_id
    ORDER BY 1, 2, 3, 4;
    SET PAGESIZE 14
    SET VERIFY ON
    Hope this helps. . . .
    Donald K. Burleson
    Oracle Press author

Maybe you are looking for

  • Enhancement of MIGO

    Hi all, I have a requirement to post  an accounting entry into 2 gl accounts when a migo (Good Reciept [both posting and rversal] ) is done on a particular type of purchase order (this is apart from the normal ones which have been added by the MM per

  • Idoc to file Scenario not working

    Hi ALL, I have created one Idoc -XI-File scenario.I have done all the preconfiguartion in Backend and XI. Now when i am testing in we19, it is showing that Idoc is sent and saved in the database but when i am going to sm58, there it is showing  Statu

  • Bapi for me32l

    Hi, I need to change the validity date in ME32l.  Which bapi that I can use for this and how to use this? Thanks

  • TS3274 How can I get the volume to work?

    We have an iPad but can't get the volume to work?

  • Why can't I open .zip files?

    The archive utility runs and runs and then it just stops. Why is that?