Urgent to find report

find the report for Employees who make taxable expense claims and non-taxable expense claims monthly, kindly just let me know

thanks Priyank for your reply.
Well we have an ABAP program in BW that outputs a flat file of data. It is basically a report, it runs every morning and I need to find out the output of the report. In SM37 when I select the job and click the button SPOOL, I get the following message that I don't have authorization to view the list.
No authorization to select from spool request 24,323 in system CBP
and then it says list contains no data.
What should I do? Please let me know.
thanks
Sabrina.

Similar Messages

URGENT : FRM-41219 Can not find report : INVALID ID

hello all
The same problem i have also posted in forms forum..
i am getting the exception FRM-41219 when calling the report from my form with the method RUN_REPORT_OBJECT.
I m calling the report in my program unit method as follows :
DECLARE
Pl_Id ParameterList;
RepId REPORT_OBJECT;
Vrep Varchar2(1000);
BEGIN
add_parameter(pl_id,'report_parameter',text_parameter,record_block.input_box);
RepId := find_repor_object('report_name');
Vrep := RUN_REPORT_OBJECT(RepId,Pl_Id);
END;
But when i run the fmx .. i get the exception "FRM-41219 can not find report :Invalid ID"
I have checked all possiblities i.e. i have also called the method as RUN_REPORT_OBJECT(RepId) and also RUN_REPORT_OBJECT(ReportName)..but in all cases i am getting the same error..i have also checked the environment variable ..it contains the correct path of my application folder where the report is available.
Kindly help me with this
if any body knows the solution..or the cause for it..please let me know here or contact me on this address
[email protected]
thank you.

Try this:
DECLARE
Report_Id report_object;
v_rep varchar2(200);
rep_status varchar2(20);
BEGIN
report_id:=FIND_REPORT_OBJECT('EMP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,:REPORT_NAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,:REPORT_DESFORMAT);
if :REPORT_DESTYPE='CACHE' then
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
elsif :REPORT_DESTYPE='FILE' then
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
end if
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:REPORT_DESNAME);
v_rep := RUN_REPORT_OBJECT(report_id);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
else
message('Error when running report.');
end if;
END;
Thanks
Rohit

Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

Dear All,
I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
Crystal Reports 2008 Reference [original link is broken]
I have also searched it but unable to find it. If anyone has this, kindly share it.

Hi Iqbal,
There is a service pack in the following link
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
There is a fix pack 03 included in the folder, I don't know if this is relevant.
Cheers

Help me! URGENT cannot find my printer model on hp website - how do i know which cartridge to order.

Help me! URGENT cannot find my printer model on hp website - how do i know which cartridge to order.

Depend on which country you are in btw, for the US this should be 61 black and 61 tricolor. For most of europe this will be 301 black and 301 tri color. So to be sure tell me from which country you are.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

FRM - 41219 CANNOT FIND REPORT INVALID ID - CALLING REPORT FROM FORM

I am using Developer Suite 10g (forms 9i, reports 9i) . windows XP.
I am using the following code in WHEN-BUTTON-PRESSED-PRESSED trigger in form to call report.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object('C:\EMP.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
END;
as as result It is displaying FRM - 41219 CANNOT FIND REPORT INVALID ID.
I have used the EMP.JSP also in find_report_object built-in. But there is no difference.
what could be the reason - plz give the solution.
with thanks
by GMS

Unless you made a mistake and overlooked it, what I suggested should work. Having said that, you did not mention the exact Forms version you are using. There may have been a problem in the version you are using which was corrected in a later release. I tested the example I offered using Forms 10.1.2.3 and it works correctly. Carefully review what you did. Verify that the file actually exists in the file system. Also, I would recommend renaming the file with all lower case letters and referencing it in the form with all lower case letters. Here is the complete code of the form I tested. I will also include the property values from the Report object.
Report1 settings:
Name - REPORT1
Subclass Information -
Comments -
Filename - dummy.rdf
Execution Mode - Batch
Communication Mode - Synchronous
Data Source Data Block - <Null>
Query Name -
Report Destination Type - File
Report Destination Name -
Report Destination Format -
Report Server -
Other Reports Parameters - On the form create the following items in BLOCK1:
Text fields:
<li>SERVERNAME
<li>REPNAME
<li>OTHERPARAMS
Button:
<li>CALL_REP
In the WHEN-BUTTON-PRESSED trigger add this code:
Declare
repid REPORT_OBJECT;
v_rep varchar2(256);
rep_status varchar2(256);
Begin
 repid := find_report_object('REPORT1');
-- Set Report Object properties
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'HTML');
-- Comm mode 1 = SYNCHRONOUS
-- Comm mode 2 = ASYNCHRONOUS
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, 1);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, :block1.SERVERNAME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, :block1.REPNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,:block1.otherparams);
SYNCHRONIZE;
-- Run report and get status
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
SYNCHRONIZE;
-- Wait for Reports to generate results
 WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
 LOOP
 rep_status := report_object_status(v_rep);
 END LOOP;
 SYNCHRONIZE;
-- If DESTYPE is appropriate for displaying to user, execute WEB.SHOW ;
 IF rep_status = 'FINISHED' THEN
 WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||:block1.SERVERNAME,'_blank');
 ELSE
 message(rep_status);
 END IF;
END; When you run the form, enter the Report Server name and the Report filename (include the path if you have not configured REPORTS_PATH). Then click on the button. Note that the substr logic may need to be altered slightly if you are using an old version of Forms/Reports.
.

Finder reports all internal hard drives as zero kb, disk utility correct

After upgrading to 10.5.3 finder is reporting internal HD's as zero KB in size and will not allow files to be coppied to them. Very Bad. Disk utility reports proper size and utilization. Does anyone have suggestions of where to start. File permissions have been repaired, before and after OS upgrade. Upgrade done from download not software update.
Also USB subsystem appears to lock up occasionally disabling mouse and keyboard, both via ADC monitor and tower connections. Motherboard battery is depleted, though I thought this would only affect system time, could it be creating other issues?

I also just had this problem. jdisk reports 83gigs used of 300GBs, finder reports 299GBs used.

"Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

Hello Everybody,
I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have the following settings in the PP Report:
Server Mode: SharePoint Integrated
SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
Document library : Documents (selected from drop down, my report is deployed to document library)
Report : report.rdl
When I select the report from drop down list its giving the error in a pop up message box as "Unable
to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
When I open the report directly from documents library its working fine and even it is working fine (
when I deployed the report) but the issue is parameters are not showing.
Any idea? Please help.
Thanks in Advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

How to find report created with Report Painter?

Hi!
how to find report created with Report Painter?
Here is the information that I have:
Object filename, let's say Y_P01_90000001
Report painter object INV-102
The thing is that Library is unknown, thats why I can not find it via GR22...
Any ideas?
Will reward,
Mindaugas

Check in GRR3 under INV node...

HOw to find Report program associated module pool program?

HOw to find Report program associated module pool program?
I.e
Me21n is the tcode.I want to find screens related to this tcode.
Associated report program is RM_MEPO_GUI.(It has no screens hence it is a report program).
(if module program is attached to tcode,i can easily find entries in d020s)
Here report program is calling a module pool program SAPLMEGUI(Has screens).
If i give the Tcode Me21n,i want to list out all the screens of it..
Can u give any suggestion....

Hi Sampath.
Manually i can see it (by seeing in system-status)..
programmatically i want to know..
for ex:if u take Tcode:Va01
we can get program (dialog) and tcode in Tstc table .
If we know the program name(dialog), we can find program and screens in d020s table.
Va01 is atatched to a module pool program..No problem to find screens..
In case of me21n,
It is atatched to report program(calling module pool program)..
Here i could not be able to get the screens ..
I think u undrstood my problem..

Cannot find report Invalid ID

I am running Oracle10gAS, and running report from form and getting this message "FRM-41219: Cannot find report Invalid ID" The coding is
declare
     repid report_object;
     v_rep varchar2(100);
begin
     repid:=find_report_object('erp_emp_asgn');
     v_rep:=run_report_object(repid);
end ;
I have already set REPORTS_PATH =c:\new_erp;
But still i am getting the same message
Please if somebody can help me.
Thank You

Did you define a Report Object in Forms Builder called 'erp_emp_asgn'?

FRM 41215: CAN NOT FIND REPORT - Please help

Hi,
I am new to oracle 9i. I am trying to convert the forms in 8i to 9i. While i am doing i have many forms calling reports thru run_product. Now i am changing those into run_report_object. Even though i am getting errors like FRM 41215: CAN NOT FIND REPORT , INVALID REPORT ID.
declare
repid report_object;
v_rep varchar2(100);
begin
repid := find_report_object('mrnr0028');
v_rep := RUN_REPORT_OBJECT(repid);
end;
This is the command i have used. Is there anything wrong, or is there any necessity to specify any particular path for report files.
Pls help me asap.
Thanks

I HAVE CREATE THIS PROGRAM UNIT(WITH LOT OF HARD WORK) FOR CHARACTRE AS WELL AS DEFAULT REPORT
RUNING ON WEB
-----------------FOR CHARACTER REPORT
procedure web_report_c ( type varchar2,parameter varchar2) is
report_id Report_Object;
report_job_id VARCHAR2(100);
report_status varchar2(100);
FILE_NAME VARCHAR2(100);
web_name varchar2(300);
user_name varchar2(30);
BEGIN
user_name:=get_application_property(username);
if type='PRINTER' THEN
report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.RRPT'; --use in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report TEMPRARY
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing parameter to report
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop --checking report status
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report is finished then make call to report
          --          web_name:='HTTP://logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
ELSIF type='SCREEN' THEN
     report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.txt'; --use txt in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report TEMPRARY
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing report parameter
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id); --checking of report status
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report status is finished then make call to report
                    --web_name:='HTTP://ORACORP/logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
end if;
end;
------------FOR DEFAULT REPORT
procedure web_report_c ( type varchar2,parameter varchar2) is
report_id Report_Object;
report_job_id VARCHAR2(100);
report_status varchar2(100);
FILE_NAME VARCHAR2(100);
web_name varchar2(300);
user_name varchar2(30);
BEGIN
user_name:=get_application_property(username);
if type='PRINTER' THEN
report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.RRPT'; --use in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing parameter to report
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop --checking report status
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report is finished then make call to report
          --          web_name:='HTTP://logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
ELSIF type='SCREEN' THEN
     report_id:= find_report_object('REPORTNODE');
     file_name:=user_name||to_char(sysdate,'-ddmmyy_hh24miss')||'.txt'; --use txt in case of character mode report
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'c:\logiWWW\temp\'||file_name); --where u want to save report
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPSERVER'); --report server name
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,parameter); --passing report parameter
report_job_id:=run_report_object(report_id);
     report_status:=REPORT_OBJECT_STATUS(report_JOB_id); --checking of report status
               while report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') loop
                    report_status:=REPORT_OBJECT_STATUS(report_JOB_id);
               end loop;
               IF report_status='FINISHED' THEN --if report status is finished then make call to report
                    --web_name:='HTTP://ORACORP/logi/'||file_name;
               WEB.SHOW_DOCUMENT('/logi/'||file_name,'_BLANK');
               else
                    MESSAGE('Report has failed. '||'status is -'||report_status);
               end if;
end if;
end;

Frm-41219 Error finding report

Hi everyone
I am trying to run report from a push button from form.Every time i am getting error FRM-41219 Cannot find report. Invalid ID.
Of course report exists and is compiled.I specified REPORTS_PATH variable in registry to point to my folder,
PROCEDURE print_report IS
repid REPORT_OBJECT;
report_job_id VARCHAR2(100);
BEGIN
repid := FIND_REPORT_OBJECT('DEPARTMENT');
report_job_id := RUN_REPORT_OBJECT(repid);
END;
Is tis a report Services Settings issue? What settings need to be done in Report Services? Or there is some other reason.
Please help me, I am stucked
Thank u

Hello,
'DEPARTMENT' in
repid := FIND_REPORT_OBJECT('DEPARTMENT');
is not the name of a REP or RDF file, it is the name of
a report object which should have been created in Forms.
You can check if the object exists in the Forms Builder :
Open the FMB
Go in the "Object Navigator"
Check if an Object called DEPARTMENT exist under the
Reports node. (If it does not exist, create it)
Regards

Finder reports different free space on disk compared to DiskUtil

After upgrading to Lion I am facing a very strange problem:
Finder reports much more free space on my Macintosh HD compared to Disk Utility. I also take a look on what Daisy Disk reports and
daisy Disk reports exactly the same numbers like Disk Utility. Booted into Lion recovery partitions and preformed disk verify and repair.
Everything seems to be fine except that finder reports significantly more free space (350 GB) compared to Disk Utility (364 GB).
Any advise ?

Trash is empty. Checked this also via Terminal. And one more comment: I do not have a Bootcamp partition. I never had one and never created one.

Why I can not find reports object in Jdeveloper

How are you!
I want to use Jdeveloper to generate a report jsp file,but I can not find reports object . How can I do! I have installes Oracle9iDSrelease2.0 in my computer.
Best regards!
Jonan Zhou

If you installed Oracle9iDS then you should have the report object inside the JDeveloper that came with this install (9.0.2). It won't work in a JDeveloper that you installed separatly.

Urgent to find report

Similar Messages

Maybe you are looking for