Urgent : Tracing required Datasource from a report

Hi,
I have to implement SD in BI, there is a TCODE given to me by the client that outputs a report (as per there requierment), Using the TCODE i have to activate the datasources and to transfer the data.
The fields on the selection screen i am able to trace from which table they belongs to and are been taken from the standard tables like VBRK etc.
When i look up at the porgram related to the TCODE, then they are fetching the data from various tables like VBRK, VBRP, MARA, KNVV, KNA1 etc and some Ztables also, after taking data from these tables they are preforming a number of calculations and then some restrictions are also there in report.
My problem is that how should i trace which datasources should i activate for taking the sales data to BI. Or how should i recognize it ?
Any help will be appreciated !!

thanks hari,
I have already visited that link, but my question is about how should i recognize that i have to activate this DS.
Suppose that in the report given to me by the client contains data from tables VBRP, VBRK they are related to billing so do i need to activate the DS related to Billing one ?
Then they are using some tables like MARA, KNVV, KNA1, KNB1, MBEW, VBFA, KONV, etc. now which all datasources i use for the data related with these tables.
I hope my query is clear to u.

Similar Messages

Removing a business view datasource from a report

Hello,
Because of a performance issue I need to change the datasource of a report from a business view to a Sql Command.
There is a note from Sap (1197246) explaining this can't be done, bad luck and I'm stuck.
Using the Ras SDK, I can change all the report elements I need, so that they are based on fornulas in place of DBFields.
The only thing I can't do is dropping all the Tables (and hence the Business View) with the RAS SDK, while it is possible with the Designer.
Does anybody know how to drop the Business View from a report using the SDK ?
Thanks and regards
Alain

No possible even in the Designer. Only option is to re-build the report.

Calling a Report from another Report.....URGENT

Hi,
I am calling a report from another report using hyperlink. I want that this new report should come in a new page.
Can any body help me where i can set this property, so that the new report will open in a new page.
Thanks in advance
Regards
Kamal

Try to call report from report by a button in the calling report:
1     In the Layout Model view, click in the tool palette. Note
2     Click and drag a rectangle.
3     Double-click the button object to display the Property Palette.
4     Under the Button Label node, set the Label Type property to either Text or Icon:
n     If the button label is text, set the Text property to the text you want to appear on the button.
n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
5     Under the Button Behavior node, set the Type property to PL/SQL.
6     Double-click the PL/SQL Trigger property value field.
7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
8     Set other properties as desired.
9     To activate the button, run the report, then display it in the Runtime Previewer.

Notification Urgent Action required

Hello Skype!
Had a call this morning entitled Notification Urgent Action Required telling me that my computer was no protected and to go to this website "ssolm.com" to download this computer protection activation. Did not download it as I thought it was a bit strange. I presume it is the same as others have already reported. Is there any risk?
Thanks for your advice
B

Hello, Anna56, and welcome to the Community!
This is a scam. Block and report such items as abuse. Do not click on such links; they do not originate from Skype. Please see this information from Primemover:
http://community.skype.com/t5/Security-Privacy-Trust-and/How-to-Handle-Suspicious-Calls-Messages-and...
Regards from a fellow Skype Community Member and Skype user just like you,
elainem77
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How to submit a concurrent request from Discoverer report.

I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
All help us in this regards are much appreciated.
Kindly help us in the same!
Thanks
Arun

Thanks Rod for confirming the same.
I will be trying the same today and will let you know if I succeed in doing it.
If I can share the actual requirement with you, it goes like this.
"I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
Please advice.
Thanks
Arun

Deletion of filter components from Bex Report in BI 7.0 via back end.

Hi,
I want to delete 2 filter field components from the BI 7.0 report via back end. Im using the Tcode RSZDELETE and giving the variable element UID, Inforprovide name, query tech name. But when i excute it says empty selection.
Other than this is there any way to delete query components at back end???
Regards,
Nisha

Thanks for the reply!
This is to delete the variable created??
My requirement is query specific , the restriction on the IO , ie the variable to be removed via back end.. that means deletion from that report..
hope my statement is clear enough to give me some light .
Thanks
Nisha

Navigation from a report to dashboad page

Hi all,
In obiee 11g , if i navigate from a report which has a navigation link to a dashboard page , it populates the prompt but report does not come automatically we need to click it once more where as it works with obiee 10.1.3.4.0 version.
Is there any way to solve this issue ?
I have kept a BI publisher report in dashboard and passing parameters to bipublisher report.
thanks in advance..

Hi,
This can be disabled.While creating the interaction, you can watch below the option-->Do not display this pop up....
You need to check or uncheck depending upon your requirements.
Regards,
MuRam

Passing Value from Crystal Report (special function) to Business View parameter

Friends,
Í have a scenario where i need to pass value from Crystal Report to a Business view's parameter.
Eg : CurrentCEUsername (func in crystal report)-- gives login user which i should pass to parameter in a Business view (used in the same report).
Will be able to explain more if required.
Thanks in Advance,
Bharath

I guess you got the picture wrong. User_id is not a report_level parameter .
In Data Foundation, below query is used..
select Acc_Number, Account_Group,User_id from Accounts where user_id={?User_id}
where in {?User_id} is the BV parameter...
The Filter was a solution. But it takes long time to Query all the data from DB and then filter at BV level.
How do i pass the CurrentCEUsername to {?User_id}
Value should ve CurrentCEusername always. so that query will be
select Acc_Number, Account_Group,User_id from Accounts where user_id=CurrentCEusername
It will restrict the data pulled from DB to BV .. right?

Getting a report in excel format from oracle report builder 10gDS release2

I want to get a report in excel format from oracle report builder 10gDS release2.
Is there ne method by which minimum effort is required for changing already made reports .
I have searched for it on internet :-
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwwhthow%7Cwhatare%7Coutput%7Coutput_a_simpleexcel~htm/
Example, given in the last of the page opened from the above url, is not working.
Can neone plz explain the example and how to use it
Thanks & Regards
JD

Ok, for the release 2 its quite straightfoward, in your calling form you would have something like this code:
declare
     pl_id ParamList;
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
v_rep_status VARCHAR2(20);
v_repsrv     VARCHAR2(100):= 'yourreportserver';
v_serv varchar2(50) := 'yourservername' ;
begin
pl_id := Get_Parameter_List('tmpdata');
if not id_null(pl_id) then
Destroy_Parameter_List( pl_id );
end if;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DESTYPE' ,TEXT_PARAMETER,'Screen' );
Add_Parameter(pl_id,'PARAMFORM' ,TEXT_PARAMETER,'NO' );
repid := FIND_REPORT_OBJECT('yourreport');     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER, v_repsrv);
set_report_object_property(repid,REPORT_DESTYPE,CACHE );
set_report_object_property(repid,REPORT_DESFORMAT,'SPREADSHEET' );
v_rep := RUN_REPORT_OBJECT(repid,pl_id);
v_rep := substr(v_rep,length(v_repsrv)+2,10 ) ;
end;
I have plenty of reports being formated to excel with this same method so it should work for you, the only diference with my previous code is this line.
set_report_object_property(repid,REPORT_DESFORMAT,'SPREADSHEET' );
The rest remains untouched.
Hope it helps.

Generate pdf file from 9i reports and save it in C:\oracle_reports\

i want to generate a file from oracle reports in PDF format and want to save it on already defined path.
c:\oracle_reports\
right now pdf generation of report is working fine but before generation of pdf report system prompt me or open a dialogue box to save my pdf file on drive. i dont want to see these dialogue box or prompt me to explicitly save it.
i want all the work done automatically.
regards
------------ source code--------------
PROCEDURE PRINT_PROC IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
pl_id ParamList;
report_path varchar2(100);
aud_sno varchar2(1000);
aud_type varchar2(500);
BEGIN
     pl_id := Get_Parameter_List('report_data');
     IF NOT Id_Null(pl_id) THEN
          Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('report_data');
     User parameters : Customize these to fit your report
     report_path := :GLOBAL.Web_BASE_PATH||:GLOBAL.PATH_SCM||'REPORT\scm_rfq.rep';
-- Initialize your report parameters here
     Add_Parameter(pl_id, 'p_cmp_code'                     , TEXT_PARAMETER, :global.company_code);
     Add_Parameter(pl_id, 'p_rfq_sno'                     , TEXT_PARAMETER, :document_sno);
     Add_Parameter(pl_id, 'P_PATH'                               , TEXT_PARAMETER, REPORT_PATH);
Standard parameters: Don't change
     Add_Parameter(pl_id, 'PARAMFORM' , TEXT_PARAMETER, 'NO');
     Add_Parameter(pl_id, 'PAGESTREAM' , TEXT_PARAMETER, 'NO');
     Add_Parameter(pl_id, 'MAXIMIZE' , TEXT_PARAMETER, 'YES');
     -- end standard parameters
     repid := find_report_object('REPORT_OBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_oas');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,report_path);
-- SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\ORCLSRV\UTL_MAIL\'||:doc_type||:receiver_sno||'.pdf');
     v_rep := RUN_REPORT_OBJECT(repid,pl_id);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
     rep_status := report_object_status(v_rep);
     END LOOP;
END;

If you use rwclient you could that easily, from a Form, it requires additional steps.
Look at this thread Re: save report

How to know how many rows including headers and footers does subreport has from Main Report

Hi, we are sturuggling with subreports. Main report has 3 subreports, each subreport is inplmented in a group header(3 subreports and 3 group headers). We would like to print a group header under subreport as a column header every page, and need a page break when group number is changed. This report exports a MS Excel(97-2003) report file.
In main report, [New After Page] is checked under Group Header #1d from [Section Expert]
In each subreport, [Repeat Group Header On Each Page] is checked under the highest group from [Group Expert]
Here are two issues;
Since Crystal Reports has more rows than Excel in one page, colmun header in each subreport is being printed in the middle of the page. It should be printed at the top of the page
When Subreport has many rows and has to be printed in more than 1 page, a page break is automatically inserted before column header. It should be printed right below column header which is Group Header #1
We have been trying to pass row counts(count of group header because group header is used as the details) using a shared variable from Subreport 1 to Subreport 2 via main report since Subreport2 cannot predict how many rows Subreport 1 has.
Here is what we are trying but we are getting an error which is "A constant expression is required here" under main report
- In Sunreport 1
whileprintingrecords;
shared numbervar SubGroupCount := DistinctCount({Table.Field});
- In Mainreport
shared numbervar SubGroupCount;
if(pagenumber) = 1
then (SubGroupCount)
else 50
Is there any solutionss or better ways other than above?
Thank you,
Main Report: Group Header #1a --> as Page Header
Run Date: mm/dd/yyyy Report Name
Main Report Group Header #1b --> Subreport 1
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Goup Header #1c --> Subreport 2
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Froup Header #1d --> Subreport 3
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6

Thank you for your reply and sorry for my complicated explanations. The report has confidential information, so I replaced to some fake data but I believe you can still see what I am trying to do..
Main Report
Subreport 2
Output1
Output2: the following page
--> more rows are printed..
We have two problems;
1. The column header in Output2 is supposed to be pronted right below the last row in Output2, however, a page break is automatically inserted. But even in the same output document, it works for some group when it has a few rows..
2. Since Crystal Reports prints more rows in one page than MS Excel does, Column header is not be printed at the top of the page.
I tried the way you advised me but it did not work..

How to print directly to Printer from Crystal Report Viewer ?

Hi All,
We are integrating our Java Web Application with Crystal report XI, currently using JRC and export to PDF for user to preview and print to local printer.
Now there is new requirement :
Some clients is using thin client terminal (no harddisk, only has OS +Browser in ROM), so I cannot install Acrobat Reader for them to preview&print the report.
So I am looking at Crystal Report Viewer, the question is : Can I print from Crystal Report Viewer directly to local printer without first converting it to PDF (because I can't have acrobat reader installed) ??
Thank you very much,
Krist
Indonesia

Hi,
It can't be achieved through XI.
JRCXI R2 SDK offers the ability to print the report server side
using the PrintOutputController using printReport(PrintReportOptions printReportOptions) method.
Here is the code(for XIR2):
import="com.crystaldecisions.reports.sdk.*"
import="com.crystaldecisions.sdk.occa.report.lib.*"
import="com.crystaldecisions.sdk.occa.report.document.*"
try {
final String REPORT_NAME = "Inventory.rpt";
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(REPORT_NAME, 0);
//Create and set print options.
PrintReportOptions printOptions = new PrintReportOptions();
//Note: Printer with the 'printer name' below must already be configured.
printOptions.setPrinterName("
10.10.45.220
BOBJ 2C");
printOptions.setJobTitle("Sample Print Job from JRC.");
printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
printOptions.setPaperSource(PaperSource.auto);
printOptions.setPaperSize(PaperSize.paperLetter);
printOptions.setNumberOfCopies(1);
printOptions.setCollated(false);
PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
printOptions.addPrinterPageRange(printPageRange);
//NOTE: If parameters or database login credentials are required, they need to be set before.
//calling the printReport() method of the PrintOutputController.
reportClientDoc.getPrintOutputController().printReport(printOptions);
reportClientDoc.close();
out.println("Successfully sent report to the printer.");
catch(ReportSDKException ex) {
out.println(ex);
Please revert in case you have any query.
Thanks,
Neeraj

REP-0002: Unable to retrieve a string from the Report Builder message file;

Hi,
I've a custom report in which i need to display a large string, of more than 4000 characters. To cater to this requirement i've written a formula column which displays string upto 4k characters and for a string of size beyond 4k i am calling a procedure which uses a temp table having a clob field.
For a small string the report runs fine but whenever a large string requirement comes into the picture, said procedure gets triggered and i get REP-0002: Unable to retrieve a string from the Report Builder message file.
OPP log for the same gives an output as under:
Output type: PDF
[9/21/10 2:17:12 PM] [UNEXPECTED] [388056:RT14415347] java.io.FileNotFoundException: /app/soft/test1udp/appsoft/inst/apps/e180r_erptest01/logs/appl/conc/out/o14415347.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
Report Builder 10g
BI Publisher's version : 4.5.0
RDBMS Version : 10.2.0.4.0
Oracle Applications Version : 12.0.6
Searched for the same on metalink and found Article ID 862644.1, other than applying patch and upgrading version of BI Publisher is there any other workaround to display a comma seperated string as long as 60k characters, If any please suggest.
Thanks,
Bhoomika

Metalink <Note:1076529.6> extracts
Problem Description
When running a *.REP generated report file you get errors:
REP-00002 Unable to retrieve string from message file
REP-01439 Cannot compile program since this is a runtime report
Running the same report using the *.RDF file is successful.
You are running the report with a stored procedure,
OR you are running against an Oracle instance other than the one developed on,
Or, you recently upgraded your Oracle Server.
Solution Description
1) Check that the user running the report has execute permissions on any stored
SQL procedures called. <Note:1049458.6>
2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
version of the report. <Note:1012546.7>
3) Compile the report against the same instance it is being run against.
<Note:1071209.6> and <Note:1049620.6>

Creating a PDF-File from a report within a service

Hello,
I have to create PDF-Files from a report within a windows service.
My source is as follows (quick and dirty) using Microsoft Report Viewer 2012
Imports Microsoft.Reporting.WinForms
Dim reportViewer1 As New Microsoft.Reporting.WinForms.ReportViewer()
Dim objRDLC As New Microsoft.Reporting.WinForms.LocalReport()
reportViewer1.LocalReport.ReportEmbeddedResource = "MyApplication.MyReport.rdlc"
Dim deviceInfo As String = "<DeviceInfo>" & _
"<OutputFormat>PDF</OutputFormat>" & _
"<PageWidth>21cm</PageWidth>" & _
"<PageHeight>29.7cm</PageHeight>" & _
"<MarginTop>0.7cm</MarginTop>" & _
"<MarginLeft>0.7cm</MarginLeft>" & _
"<MarginRight>0cm</MarginRight>" & _
"<MarginBottom>0cm</MarginBottom>" & _
"</DeviceInfo>"
objRDLC.DataSources.Clear()
'Fill Report with data
reportViewer1.LocalReport.DataSources.Clear()
reportViewer1.LocalReport.DataSources.Add(New Microsoft.Reporting.WinForms.ReportDataSource("dsInfo", dt))
reportViewer1.RefreshReport()
'Output Report as File
Dim byteViewer As Byte() = reportViewer1.LocalReport.Render("PDF", deviceInfo)
Dim newFile As New FileStream("MyFileName", FileMode.Create)
newFile.Write(byteViewer, 0, byteViewer.Length)
newFile.Close()
'Clean up
newFile.Dispose()
objRDLC.DataSources.Clear()
objRDLC.Dispose()
reportViewer1.Dispose()
In most cases everything works fine.
But the service crashes after some/many reports (e.g. after 270 reports or after 1.400 reports). There is no fix number of reports that causes the service to crash.
The service crashes with the following error:
System.ComponentModel.Win32Exception (0x80004005): Fehler beim Erstellen des Fensterhandles.
   bei System.Windows.Forms.NativeWindow.CreateHandle(CreateParams cp)
   bei System.Windows.Forms.Control.CreateHandle()
   bei System.Windows.Forms.Control.get_Handle()
   bei System.Windows.Forms.Control.PointToScreen(Point p)
   bei System.Windows.Forms.ToolStripItem.TranslatePoint(Point fromPoint, ToolStripPointType fromPointType, ToolStripPointType toPointType)
   bei System.Windows.Forms.ToolStripDropDownItem.DropDownDirectionToDropDownBounds(ToolStripDropDownDirection dropDownDirection, Rectangle dropDownBounds)
   bei System.Windows.Forms.ToolStripDropDownItem.GetDropDownBounds(ToolStripDropDownDirection dropDownDirection)
   bei System.Windows.Forms.ToolStripDropDownItem.get_DropDownLocation()
   bei System.Windows.Forms.ToolStripDropDown.GetDropDownBounds(Rectangle suggestedBounds)
   bei System.Windows.Forms.ToolStripDropDown.SetBoundsCore(Int32 x, Int32 y, Int32 width, Int32 height, BoundsSpecified specified)
   bei System.Windows.Forms.Control.SetBounds(Int32 x, Int32 y, Int32 width, Int32 height, BoundsSpecified specified)
   bei System.Windows.Forms.Control.set_Size(Size value)
   bei System.Windows.Forms.ToolStripDropDown.AdjustSize()
   bei System.Windows.Forms.ToolStripOverflow.OnLayout(LayoutEventArgs e)
   bei System.Windows.Forms.Control.PerformLayout(LayoutEventArgs args)
   bei System.Windows.Forms.Control.PerformLayout()
   bei System.Windows.Forms.Control.ResumeLayout(Boolean performLayout)
   bei System.Windows.Forms.Control.ResumeLayout()
   bei System.Windows.Forms.ToolStrip.OnLayout(LayoutEventArgs e)
   bei System.Windows.Forms.Control.PerformLayout(LayoutEventArgs args)
   bei System.Windows.Forms.Control.PerformLayout()
   bei System.Windows.Forms.Control.ResumeLayout(Boolean performLayout)
   bei System.Windows.Forms.Control.SetBoundsCore(Int32 x, Int32 y, Int32 width, Int32 height, BoundsSpecified specified)
   bei System.Windows.Forms.TextBoxBase.SetBoundsCore(Int32 x, Int32 y, Int32 width, Int32 height, BoundsSpecified specified)
   bei System.Windows.Forms.Control.System.Windows.Forms.Layout.IArrangedElement.SetBounds(Rectangle bounds, BoundsSpecified specified)
   bei System.Windows.Forms.ToolStripControlHost.OnBoundsChanged()
   bei System.Windows.Forms.ToolStripItem.SetBounds(Rectangle bounds)
   bei System.Windows.Forms.ToolStripItem.set_Width(Int32 value)
   bei Microsoft.Reporting.WinForms.ReportToolBar..ctor()
   bei Microsoft.Reporting.WinForms.ReportViewer.InitializeComponent()
   bei Microsoft.Reporting.WinForms.ReportViewer..ctor()
   bei DC5Warteschlange.clsReportTools.Druck(DataTable dt, String Reportname, String ReportDataset, String Drucker, String Format, String Datei)
   bei DC5Warteschlange.clsInfoQueue.Snotiz(String[] CallIDs, String Speicherort)
   bei DC5Warteschlange.Imail.InformationMailSenden(Int32 AID, DataTable& tmpDT)
Thank you very much....
Gernot

Unfortunately, it is not a piece of code that I can send. The SQL would be embedded inside Oracle Reports tool, and you would have the option to save the output of the report in PDF format.
Once you have the Oracle Report developed, you can execute it from command line prompt and save the output to a pdf file. In your case, the cursor would be embedded inside Oracle Report
Shakti
http://www.impact-sol.com
Developers of Guggi Oracle - Tool for DBAs and Developers

Calling a report from a report (10g)

Hi
I am using DeveloperSuite 10g and Application Server 9.0.4 - I am trying to call a report from another report.
I believe I am correct in thinking that as buttons don't exist in reports any more I have to use a hyperlink containing the URL to the reports service with appropriate parameters to invoke the required report.
My problem is that when I click on the hyperlink I do not see the called report, but get an html screen saying "Oracle Report Status - Successfully run".
My hyperlink is formed like this:
/reports/rwservlet?module=reportb.rdf
Is there an additional parameter I must pass to get the report to display on the client browser window?
Thanks

Hi,
Can someone let me know as to what the maximum length of the URL string that could be formed? I believe in IE browser a maximum of 64,000 characters can only be formed. If I need to pass many parameters and the length of the values passed exceeds the default length in IE, the rest of the values will not be captured in the report server.
Please let me know on how to proceed with this problem.

Urgent : Tracing required Datasource from a report

Similar Messages

Maybe you are looking for