URI format for using XSL document function.

Hi Tim,
>>but I am not able to figure out where I should place the xml file. What are best practices for choosing a location for the xml file?
You can place the xslt code and xml file in a single folder, zip it an import it into PI as an external definition. I think this should work
Regards
Suraj

Thank you for your reply. But my requirements are such that they need to be independent, and not be in the same imported archive (ie ZIP file). In my case the XSLT code is a standard product that is the same across multiple installations, but each installation may required some installation specific cross reference values that would be maintained in the XML file. So I need them separated so if I make updates to my XSLT and distribute it, I do not wipe out the installation specific settings that have been made to the XML file.

Similar Messages

How to use xsl document() function with LiveCycle XSLT processor

Hello,
I would like to use LiveCycle XSLT processor to merge xml documents by using the xsl document() function.
However, I have not, yet, found clear reference information on the specifics of how to accomplish in LC. For instance if you have
a transformation that does merging using a standalone xml editor (such as Oxygen), than what is required to accomplish the same
using the LiveCycle XSLT service. How do you specify the URI of the XML document that is specified as an input in the xsl document() function. Your insight is appreciated. Regards

Hello Steve,
I checked the reference that you cited (XSLT Transformation). The reference omits discussing how to use xlst document() function within a stylesheet. I think that probably means that feature of xslt technology is not directly available through LiveCycle. When I find a workaround, I'll post an update...for the user community that might encounter the same issue. Thank you for your response and insight. Regards, jb1809

Using xsl document function in transform xsl

I'm trying to use an external xml document in an xsl transform that's used in a Transform activity in an 11g BPEL process:
<xsl:variable name="plants" select="document('plantTransposeLookup.xml')/plants"/>
I need to load up the document to use it in a lookup to get replacement values for a key.
This works fine in JDev, but not when I deploy it to the server.
The error I get when I run it is:
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: XML-22021: (Error) Error parsing external document: 'no protocol: plantTransposeLookup.xml'.. Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
I've also gotten:
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: XML-22021: (Error) Error parsing external document: 'Unsupported feature: 'document(''), when stylesheet built using InputStream, Reader'.
I've also tried using the ora:doc function:
<xsl:variable name="plants" select="ora:doc('plantTransposeLookup.xml', 'plants')"/>
......but this doesn't work in JDev and is also erroring off on the server with:
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: XML-22016: (Error) Extension function namespace should start with 'http://www.oracle.com/XSL/Transform/java/'.. Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
Does anyone know how to actually import an xml doc into a mapper??? I must be doing something stupid.
Thanks for any help.

In OSB, document() function needs absolute path of the XML file. So if you want to access the XML document for lookup, you need to put the XML file on the server itself and use the path of the XML file.
Although this is not a correct approach for managing lookups in OSB. The resource of XML Document type are not to be used for such use cases. What you can do is create a XQuery which can server as DVM.
Here is an example on how to use DVMs in OSB:
https://blogs.oracle.com/christomkins/entry/domain_value_maps_in_oracle_se
If you dont want to use XQuery and want to rely only on XSLT, then within the same XSLT document create a separate template which can store all the lookup data.

Code sample for using change document function modules

Can someone send me some sample code for using function modules CHANGEDOCUMENT_READ_HEADER and CHANGEDOCUMENT_READ_POSITIONS? I'm specifically looking for changes that occured to the standard price field in the material master (MBEW-STPRS) and I need to pull the most recent price change for a given material. I'm not sure how to write the code efficiently since I don't have a date to pass (again, since we're looking for the most recent change.)
Thanks!

hi check this..
CHANGEDOCUMENT_READ_HEADERS
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS
Example:
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
objectclass = 'EINKBELEG'
objectid = l_objectid
username = space
TABLES
i_cdhdr = lt_cdhdr.
LOOP AT lt_cdhdr WHERE udate IN s_aedat.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
changenumber = lt_cdhdr-changenr
TABLES
editpos = lt_editpos.
LOOP AT lt_editpos WHERE fname = 'LOEKZ'
AND f_new = 'L'.
p_desc = text-r01. " Cancel Contract
ENDLOOP.
ENDLOOP.
Check this link.
http://www.sap-img.com/mm001.htm
<REMOVED BY MODERATOR>
venkat.
Edited by: Alvaro Tejada Galindo on Mar 18, 2008 4:05 PM

Use of document function in XSL

We have an existing XSL document which uses a separate XML document for mapping of enumerated values. So in the XSL document, we have a line in our XSL as follows:
<xsl:variable name="enum-doc" select="document('enumerations.xml')"/>
Followed by a load of:
<xsl:key name="a-name" match="//enum[@name ='a-name']/enumeration" use="@value"/> etc.
We would like to use the existing XSL in BPEL. Is this possible? We have been able to deploy the mapping XML file with our BPEL process, but the XML mapping file is not beinig picked up by our XSL, so in our output we have a lot of missing enumerated values.
Any suggestions?
Thanks,
ma7asw

We managed to resolve the problem (We were using the wrong namespace in the XML mapping file).
So to confirm, it is possible to use the document function in an XSL transform within a BPEL process.
ma7asw

Generate HTML format report using DBMS_SQLTUNE.REPORT_TUNING_TASK function

How could i generate HTML format report using DBMS_SQLTUNE.REPORT_TUNING_TASK function in oracle 11g

See [url http://download.oracle.com/docs/cd/E11882_01/appdev.112/e16760/d_sqltun.htm#CHDGEIHJ]documentation for DBMS_SQLTUNE.
The TYPE parameter suggests that it would determine the format and whilst the nline documentation in the code (desc DBMS_SQLTUNE) suggests that valid values are TEXT, HTML and XML, it seems that this is not yet implemented. Whilst valid values of TEXT, HTML and XML are validated, only a TEXT report is produced.

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have a western digital external hard drive that needs to be re formatted for use on my but iMac but I do not want to lose existing data

I have a Western Digital external hard drive that needs to be re formatted for use on my iMac, but I do not want to lose existing data, is this possible ?

Formatting a disk always erases all the data on it. Your only option is to back it up elsewhere and restore it once formatted.

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC. I would appreciate any help with this.

Thanks for the quick help. I do have to leave for work. When I try to
download the images from the camera they seem to only be in jpeg (I don't
see any rw2 or raw files to download). If I select the jpeg file it seems
to only download a jpeg file. I do understand that I do have the option to
open the jpeg in RAW. In doing this, is all the extra information included
in the RAW file there or is it lost coming from the camera
Once again thank you for trying to make me understand how this works.
Have a great day.
On Sat, Sep 13, 2014 at 12:14 PM, ssprengel <[email protected]>

Looking for example - abap xslt - that uses xslt document() function

Hello,
I'm looking for an example that shows the use of abap xslt with the xslt document() function. Using the xslt document() function seems like a straightforward way to use xslt to create a result xml document by processing the content of two or more
source documents. For example, if source document A.xml and aux.xml are available in memory as xstringand using stylesheet ztransformwhat would be the argument for the document() function to associate aux.xml. Thanks for any insight.
Regards,
jb10809

Hi,
Sorry, perhaps I should have been clearer! The function that I picked just to test what you need to do just happened to return a string that contains SPAN tags with style attributes. The actual function code is:
create or replace FUNCTION out_string_fn
   RETURN VARCHAR2
IS
   CURSOR emp_cur
   IS
      SELECT ename
        FROM emp;
   v_string   VARCHAR2 (4000);
BEGIN
   v_string := ' ';
   FOR c IN emp_cur
   LOOP
      v_string :=
            v_string
         || '<SPAN style="font-weight:bold;color:green">'
         || c.ename
         || '</SPAN>'
         || ', </br></br>';
   END LOOP;
   RETURN v_string;
END;And this returned a naff list in green (see [http://apex.oracle.com/pls/otn/f?p=55041:57] and click the Test button) - but it does show that you can style the validation error messages
Andy

HT2518 which program can I use to open a Word file that is formatted for use ONLY on a PC?

I hve a word doc that is formatted only for use on a PC. I cannot change the file at the request of the sender. Is there a way to open and fill out the word document on a mac. I used to have Parrelles which allowed me to do so but no longer have this program. Specifically the word document has pre-programmed drop downs in the form. They do not function, nor allow me to type a word into the field.

There is no such thing as a Word file formatted only for a PC.
You need a copy of Word to open it (Word for Mac), it may also work with Open Office and Libre Office, these are free to download.

URI format for shared local files

Firefox uses this format to access shared files on a local network... file://///host/path eg file://///computername/sharename/MyDocs/filename.txt.
This format is different from the standard form file://host/path that is used on other browsers eg Windows, Chrome.
This means that Firefox does not give me access to shared files when I have coded the standard format URI into my local HTML documents. Why is Firefox different or non-standard.

hello seebee, apparently file://///host/path is the standard form for a unc path:
"That's five slashes - two for the protocol, one to indicate the root of the file system, then two more to indicate the start of the server name."
<sub>https://stackoverflow.com/questions/5317834/workaround-for-href-file-in-firefox</sub>
it is also explained in this bug from 2001: https://bugzilla.mozilla.org/show_bug.cgi?id=66194#c8

Formatting output using XSL

Hi All,
Here is my XML output from an XSQL file.
<ROWSET>
- <ROW num="1">
<EMP_NAME>Employee A</EMP_NAME>
<WEEK_NUM>3</WEEK_NUM>
<NOOFDAYS>5</NOOFDAYS>
</ROW>
- <ROW num="2">
<EMP_NAME>Employee A</EMP_NAME>
<WEEK_NUM>4</WEEK_NUM>
<NOOFDAYS>5</NOOFDAYS>
</ROW>
- <ROW num="3">
<EMP_NAME>Employee A</EMP_NAME>
<WEEK_NUM>5</WEEK_NUM>
<NOOFDAYS>5</NOOFDAYS>
</ROW>
- <ROW num="4">
<EMP_NAME>Employee B</EMP_NAME>
<WEEK_NUM>4</WEEK_NUM>
<NOOFDAYS>5</NOOFDAYS>
</ROW>
- <ROW num="5">
<EMP_NAME>Employee B</EMP_NAME>
<WEEK_NUM>7</WEEK_NUM>
<NOOFDAYS>5</NOOFDAYS>
</ROW>
- <ROW num="6">
<EMP_NAME>Employee B</EMP_NAME>
<WEEK_NUM>9</WEEK_NUM>
<NOOFDAYS>4</NOOFDAYS>
</ROW>
- <ROW num="7">
<EMP_NAME>Employee C</EMP_NAME>
<WEEK_NUM>3</WEEK_NUM>
<NOOFDAYS>2</NOOFDAYS>
</ROW>
- <ROW num="8">
<EMP_NAME>Employee C</EMP_NAME>
<WEEK_NUM>4</WEEK_NUM>
<NOOFDAYS>5</NOOFDAYS>
</ROW>
- <ROW num="9">
<EMP_NAME>Employee C</EMP_NAME>
<WEEK_NUM>7</WEEK_NUM>
<NOOFDAYS>4</NOOFDAYS>
</ROW>
So I am getting XML in form of:
Employee A: Week 3: Noofdays : 5
Employee A: Week 4: Noofdays : 5
Employee A: Week 5: Noofdays : 5
Employee B: Week 4: Noofdays : 5
Employee B: Week 7: Noofdays : 5
Employee B: Week 9: Noofdays : 4
Employee C: Week 3: Noofdays : 2
Employee C: Week 4: Noofdays : 5
Employee C: Week 7: Noofdays : 4
And now I need to generate and output in Cross tab format where Employee is in X-axis and Week is in Y axis. Now my XML does'nt contain information for all the weeks and I want to display 0 in the cell wherever the week is not applicable and the appropriate noofdays in the cell where information is there.
So my output looks like this:
Empl Name 1 2 3 4 5 6 7 8 9 10
Emp A 0 0 5 5 5 0 0 0 0 0
Emp B 0 0 0 0 5 0 5 0 4 0
Emp C 0 0 2 5 0 0 4 0 0 0
How can I generate such output using XSL. I even tried <xsl:key> but its not working fine. Can anyone have any ideas for generating such output using xsl.
Any help in this will be highly appreciated. Its bit urgent...
Thanks

Hi All,
Well I got the solution for this. The exact XSL for generating Crosstab report is as follows:
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:key name="x" match="ROW" use="ROWS"/>
<xsl:template match="/page">
<html>
<center>
<body bgcolor="#FFFFFF" text="#000000">
<table width="75%" border="1" style="background-color:#F5DEB3">
<th style="background-color:#BBBBBB">Employee Name</th>
<xsl:for-each select="ROWSET/ROW/COLH">
<th style="background-color:#BBBBBB">
<xsl:value-of select="."/>
</th>
</xsl:for-each>
<xsl:for-each select="//page/ROWSET/ROW[generate-id()=generate-id(key('x',ROWS))]">
<xsl:variable name="currow" select="ROWS"/>
<tr>
<td><xsl:value-of select="$currow"/></td>
<xsl:for-each select="//page/ROWSET/ROW/COLH">
<xsl:variable name="curcol" select="."/>
<td align="center">
<xsl:for-each select="/page/ROWSET/ROW[ROWS=$currow]">
<xsl:if test="$curcol=COLS">
<xsl:value-of select="CELLS"/>
</xsl:if>
</xsl:for-each>
</td>
</xsl:for-each>
</tr>
</xsl:for-each>
</table>
Back
</body>
</center>
</html>
</xsl:template>
</xsl:stylesheet>
I hope this will help others.
Thanks
null

Best external hard drive format for use with mac and windows?

This is more of an apple operating system combined with windows operating system question, but being that my OS will upgrade an fluctuate there is not option to choose in the operating system section.
Anyways to the question(s)
This whole prbolem came about when my computer started having issues, I want to back it up and whether I can continue to use my laptop or not I will still be owning an apple in the future. I went to buy a hard for back up and got told that it is not as easy as one would think to transfer files from mac OS to windows OS and vice versa. I have a mac, my boyfriend has a windows computer; we share files. Mostly I just copy his files, but once in a while I give him files too. I have read up and talked to people and only found one solution so far to format the external drive to fat 32 or exfat. I think only mac has the exfat option, but works well between both OSs, correct me if I am wrong.
What is the difference between fat 32 and exfat?
A user posted some good info about formatting. More specifically .Drives, partitions, formatting w/Mac's + PC's
https://discussions.apple.com/docs/DOC-3044
If I do not want to use fat32 or exfat is there a format type that works great for mac saving that I can still at least save files to that were originally on a windows computer? Such as I copy his files from his external drive to my computer and then save them to my external drive.
Is there a better format for file sharing between mac and windows that does not set a 4GB limit?
And a silly question, Can you dual format a hard drive?
Note: This format is for an external hard drive.

I still do not know which format would be the best. That is so that I can use it easily between mac OSX and windows. Is FAT32 the only true option? How limited is it? I heard it is limited to 4GB file size for windows and 32 GB for Mac. Are there other sources I have not found with more concrete information on the limitations of this format?
I really do still need this information and I need to back up my drive before I can take the computer in for service.

1 hd with 2 file formats for use between mac and windows?

Think this is the right forum...
I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
Thanks.

An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

URI format for using XSL document function.

Similar Messages

Maybe you are looking for