URL Configuration setting in SRM

Hi,
We are implementing SRM 5.0.
Where we suppose to define the URL( SRM portal page) in configuration?
Is there is any documentation available for setting up the URL connections?
Helpfull answers will be rewarded.
Thanks & Best Regards

Field     Entry
Logical system (LOGSYS)     Name of the logical system Enterprise Buyer
Web server (WEB_SERVER)     Domain of the ITS server with port information, for example, pgaec.wdf.sap-ag.de:1080
SAPGUI for HTML protocol (WEB_PROTCL)     For example, HTTP or HTTPS
Server for GUI start (WIN_SERVER)     Domain of the ITS server with port information, for example, pgaec.wdf.sap-ag.de:1080GUI-start protocol (WIN_PROTCL)     For example, HTTP or HTTPS
Knowledge Warehouse Web server (KW_SERVER)     Domain of the ITS server with port information, for example, pgaec.wdf.sap-ag.de:1080
Knowledge Warehouse protocol (KW_PROTCL)     For example, HTTP or HTTPS
Drag & Relate server (DR_SERVER)     No entry
Drag & Relate protocol (DR_PROTCL)     No entry
Sent your mail too.
Muthu
Edited by: Muthuraman Govindasamy on Sep 8, 2008 1:03 PM
Edited by: Muthuraman Govindasamy on Sep 8, 2008 1:19 PM

Similar Messages

  • SOAP Receiver : Dynamic URL configuration vs. TAuthKey capability

    Hello all,
    I plan to use dynamic URL configuration of web service URL in SOAP Receiver CC. I got an idea, which is more or less described on SDN already. But one thing bothers me a lot.
    In my scenario we talk about 10 and more WebServices' URLs to be called dynamically. The WS call will include also authorization username:passwd and it is expectable, that each WS will have different uname:passwd definition to be authorized with.
    I made a capability analysis of SOAP Receiver CC - tab Advanced - Authetication keys and there are prepared only 10 possibilities to define password for authentication key (which I'll handle to CC via TAuthKey parameter).
    In the help page http://help.sap.com/saphelp_nw04s/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm there is a note regarding authentication key:
    If authentication is required for the receiver system, you can enter a password with confirmation for each key value. This means that you do not need to write passwords in the enhanced message header.
    So in other words there should be a way, how to send to CC even the password with other adapter-specific message attributes. (or maybe I miss the meaning of this comment, like the other way is to develope own module for CC and process additional attribs from enhanced message header)
    Does anyone have some experience with handling the authentication data in "enhanced message header" ?
    Thanx for you info in advance.
    Regards
    Tom

    Hi all,
    I got an idea that the solution could be to use "Enhanced receiver determination" and use a set of Services-CommChannels with special naming convention. With this (little bit complicated) scenarion I'll get a possibility to define more then one SOAP Receiver CC => I'll get more than 10 options to store the logon password.
    What do you think ?
    Points for ideas guaranteed.
    Tom

  • I am getting "The contents cannot be displayed in a frame" error when tried to acces an external URL configured through launchpad(ESS). How to rectify it?

    Hi Guys,
    We have configured ESS role through launchpad. For viewing payslips we are using an external URL configured through launchpad.
    But when we try to access the configured link in ESS role, it displays "The contents cannot be displayed in a frame" .
    Should I need to change some parameters/settings in Launchpad so that I could overcome this issue.
    Guidance required,
    Regards,
    Ajeeth Kumar S

    Hi Shankar Reddy Chamala,
    Thanks for the alternate solution.
    But the solution you have provided also ended up with the same error
    "The content cannot be displayed in a frame" error.
    Some additional information so that you could help me out,
    The following is the test report .
    HTTP/1.1 200 OK
    Server: TIN-AppServer
    Strict-Transport-Security: max-age=15552000
    Cache-Control: no-cache, no-store, must-revalidate
    Pragma: no-cache
    Expires: Thu, 01 Jan 1970 00:00:00 GMT
    x-frame-options: DENY
    Content-Type: text/html; charset=UTF-8
    Content-Encoding: gzip
    Content-Length: 2421
    Date: Thu, 15 May 2014 14:23:14 GMT
    Connection: keep-alive
    Vary: Accept-Encoding
    The tester has mentioned the yellow highlighted property may be a cause for this issue.
    I googled that the highlighted property is set by the website owners for security reasons.
    Shankar I have another doubt..
    Is it feasible to create an HTML document to open the external link and link the HTML document to the iview and then configure the custom iview with launchpad.?
    -->If yes can you please elaborate the steps for it.
    Thanks and Regards,
    Ajeeth Kumar S

  • Don't Found Configure Setting Option in Cellular on IOS 8

    hello apple support,
    i have updated IOS 8 on my Iphone 5 and iphone 4s ..but in my both iphones i did not  Found Configure Setting Option in Cellular on IOS 8.so that i cant configure Manually my internet service provider configure.please help me

    SWB_Apple wrote:
    Thanks bobseufert!  Method 1 is acceptable and indeed is 7 taps/clicks.  That's better than 10.  It's still not as good as the "shortcut" I mentioned above available in IOS 7 (which was 4 taps), but again, I'll take any improvement.  Method #2 would result in having too many bookmarks, but I'll for sure start using your method #1 until (hopefully) someday, Apple incorporates the duplicate/copy function natively in Safari.  Much appreciation!
    One other thing you could try is to type the name or partial URL of the tab you want to duplicate in a new tab.  Safari will use your history to give you suggestions, which may or may not be less than 7 taps:
    Open a new tab using "+" button.
    Tap in address view to bring up keyboard.
    Start typing part of the title or URL of the tab to duplicate.
    Tap the search result that matches.
    Obviously Step 3 may require multiple keyboard taps, so it may be more than 7, and this won't guarantee to duplicate the URL exactly if you have a lot of pages open with similar titles or URLs (or from the same web site), but I thought I'd offer it as an alternative.

  • Configuration setting that needs to be changed to allow flexibility copy and to paste formatted text

    what is the configuration setting in Contribute that needs to be changed to allow me flexibility copy and to paste formatted text?
    Example I am unable to copy and paste formatted text within contribute and the line that is represented under the heading below
    Research Analysis
    This is the  research and analysis page. The most recent analysis for all companies listed on the

    I'm not familiar with 'styled text'- which does not mean much other than it's on a very long list of things I don't know. But I do know you can cut several steps out here:
    If your script works so far then you can clean it up:
    tell application "FileMaker Developer"
    open "MacintoshHD:Users:stuart:Desktop:Practice.fp7"
    set mytext to record 2 of table 1 of database 1 as styled text
    end tell
    tell application "Microsoft Word"
    activate
    set myRange to create range active document start 0 end 0
    insert text (mytext) at myRange
    end tell
    Also try:
    set mytext to contents of record 2 of table 1 of database 1 as styled text
    Reese

  • How to maintain One product cost collector for multiple materials and configuration setting

    Hi experts,
    my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
    I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
    please guide me in the same.
    Thanks in advance.

    Hi Shripad,
    you cannot assign same  Product cost collector to different material.
    Because you creating cost collector for material combination of material /production version,material /Bom Routing.
    so please create individual cost collector for every material.
    if you have any query kindly revert back.
    Please mark the answer as helpful if it is helpful to you.
    Because march 5 onwards scn has stopped awarding points to liked content.
    Starting now: No more points for likes on comments/replies
    Thanks & Regards
    Sandeep Kumar Praharaj

  • Configuration setting not saved

    hi,
    When i receive configuration setting for web beowsing on my mobile from my service provider.I get a message " trusted server setting received but not saved.message could not be authenticated and deleted."So i am unable to browse the web.Please help me .

    You seem to have deleted the settings message from your service provider. Contact them and ask them to send it again. This time after you receive it you need to save it and it should auto install. Also sometimes there is a password to save it. If there is, the service provider usually sends you a separate message with with it.

  • I need a configuration setting

    i ve tried seting up the configuration setting of my phone but is not working ,i ve gone to nokia website,i ve dnoe it automatically and maually but nor is working and my phone secrity code is been locked by the nokia produe,the defult code is not opening it so that i can restore my factory setting only,i need this configuartion,i ve tried on several ways to active it ,my phone model id nokia 2630,waht do u think is the problem with my phone ,i request fron the nokia setting fron net but i wont receive any reply from them,am sure with the number i use to give them, waht do l do,i need the setting pls assit me,winny
    Message Edited by geronimo on 01-May-2008 07:41 AM

    Before you do that, just realize there is a very good chance it will mess everything up. When you are using these 3rd party languages and frameworks, and especially 3rd party tutorials, you have to play by their rules. I just wanted to know what OS you were running. Many of those various 3rd parties will assume something newer than 10.6.8, but also something older than 10.10.2. I have no idea what the exact magic sauce would be to get to exactly the right version.
    You might want to consider Linux in a virtual machine. It won't be any easier to setup and may be much more difficult. But you can deal with the ruby and python inside the Linux without possibly screwing up all of your other software in the Mac world.

  • An order is getting lock instead of all the configuration set right

    Hi gurus tell me i raise a ticket pls let me kno_w**
    " An order is getting lock instead of all the configuration set right. "

    Welcome to the forum.
    The message whatever you had provided is not enough.  Anyway, check in XD05 whether the customer is blocked.  Else give the error message number.
    thanks
    G. Lakshmipathi

  • Configuration setting for Message type to take OA print out put

    Hi All,
    Please let us know how to configure setting for Message type  for OA in SD to take print or to get print preview.
    Pls let me know .
    Regards,
    Nagaraj S

    hhv

  • What is the configuration setting pointing to clr.microsoft? is it safe?

    I've got a configuration setting, don't know what put it in my phone (I know one can simply sent by the carrier through a sort of multimedia message) and I'd like to know whether it's safe before to accept it.
    I didn't accept it.
    It has 17 screens of data I screen captured pointing to e.g.
    mscrl.microsoft.com/pk… ( I can't read more)
    URI http://mscrl.microsoft.com/pk…
    URI http://crl.microsoft.com/pki/…
    URI http://corppki/crl/Microsoft%
    Is it safe to accept it?
    Is it a spy?

    Hello Peg14,
    I think you are referring to the marker that tells you the app is an alias.  You must at some time have dragged an Alias copy into the dock.   You cannot delete the arrow.
    Try going to Applications and dragging the Safari icon you find there, into the dock. Once it settles and shows without the arrow, drag the icon that offends, out of the dock and let go in the desk top area ... Poof, and gone.   Doesn't matter that you will, for a few moments, have two safari icons in the dock.

  • Output Determination Configuration Setting for GoodsIssue(Transfer Posting)

    Hello Gurus,
    Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
    Thanks N Regards,
    Venu MG

    hi,
    PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
    8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
    Regards
    Priyanka.P

  • Configuration setting for syncronizing

    Hi all,
    I try to syncronizing address book with outlook, but if I klik configuration setting, I can't choise check box for address book, calender etc ( always ask connect internet ). I won't connect internet...
    Please help...!!!
    Curve 3G 9300
    OS 6.0.0.448
    DM 6
    Solved!
    Go to Solution.

    triyonoa wrote:
    I connect my BB to PC used cable data.
    Open Destop Manager 6 and success syncronizing media file, but if I try to click configuration setting for syncronizing address book, calender and memo, it must be open popup choice to check box for address book and calender (refer: user manual DM6 ), but I click configuration setting and direction to connect internet and not choice to check box.
     Ok, so connecting is not a problem.
    It may well be worthwhile downgrading the BB OS. Go throught the process of wiping the device and reinstalling a previous OS to see if this will permit Syncing.
    http://supportforums.blackberry.com/t5/BlackBerry-Curve-Series/Update-Curve-8310/td-p/967193
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Configuration setting of QM

    Hi all ,
    can pls provide me the configuration setting to implement QM .
    Regards
    Prerna

    Hi
    This is very generic question which can have many answers as per one's knowledge
    still
    To start with
    Refer
    QM
    Re: QM configuration
    Re: qm configuration doc(urgent)
    Quality Management (QM)
    The specified item was not found.
    http://help.sap.com/bp_bl603/BBLibrary/Content_Library_BL_EN_IN.htm
    Regards
    Sujit..

  • Configuration setting to always put Manual Sales Orders on hold

    Can any one tell me the Configuration setting to put Manual Sales Orders always on Hold.

    hello, friend.
    when you say 'on hold', are you referring to a delivery block and/or a billing block?
    if so, you can do this by doing VOV8, select your sales document type and make an entry in the fields 'delivery block' and/or 'billing block'.
    now, when you create a sales order using this document type, the order will be automatically blocked and will require release by an authorized party (VKM1, VKM3 and VKM4 for a delivery block, V23 for the billing block).
    regards.

Maybe you are looking for