Usage Considerations

Hi,
Can you please tell me the technical and/or business considerations which decide whether to use BPM/BRM/BRFPlus?
Technically,we use BPM and/or BRM in case of java envoronment,say,SAP PO,other than that what are the other java environments/technical/business considertations we use BPM for?DO we always need to use BRM with BPM ?If not then what are the requirement we use them independently and together?
Are the phases of the project which are blueprinting,implementating,testing which are applicable for BRFPlus are also applicable for BPM and/or BRM?Or there are different ones for these??
Thanks in advance

OK, I'll do my best:
one aspect are the costs: BRFplus comes for free, BRM and DSM often needs an additional license (if it is not bundled within another license).
In an ABAP + non-SAP world BRFplus/DSM is my recommendation. BRFplus rule systems can be exposed as services.
With Java + non-SAP + PO BRM would be my choice.
In the mixed world I would use both BRFplus/DSM and BRM.
I suggest to use BPM together with BRM when developing "lightweight" Java apps using workflows.
In fact we are using BPM without BRM since we are using a special tool in the insurance area. But using BRM as rule engine without workflows is also possible, just think of an central service for customer validation for example implemented in a central rules engine.
SAP PO integrates PI, BPM und BRM so using BRM is natural: http://wiki.scn.sap.com/wiki/display/NWTech/SAP+NetWeaver+Process+Orchestration

Similar Messages

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

Cannot printout the invoice bulk files.

Hello.
We have using PDF on R3 through Adobe Document Service on JAVA stack.
The PDF is invoice file.
We can printout the file. but cannot printout multiple invoice files at one time.
To do, We have input output device. Then developer changed the source program to specific output device.(ZPDF)
But We cannot still use it.
Wihtout user input , it is not possible?
output device : ZPDF.
device type : PDF1 : PDF ISO Latin-1 4.6D+
Host Spool Access Method : L: Print Locally Using LP/LPR
Host print : __DEFAULT.
When we try to printout the invoice files (many files). I got some error message on Spool.
Description          Value
Status:              Incorrect (Error Sending Data)
Job status:          Completed
Area:                Data transfer
Error:               Host spool error
Info:                /usr/bin/lp: destination "__DEFAULT" non-existent
Last event:
Message:             Processing completed by spool work process
Date:                2010-01-25
Time:                18:48:52
Error class:         Information
Area:                SAP Spool
Printout:            Not printed
In cas of normal files (Converted pdf file from SMARTFORMS), We can printout many files at one time without user input.
Could you please how can we do that?
Thanks.

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

Crash on iPad 3 & 4 + ios7 with AIR 4

I've tested my app (AIR w/GPU render mode) succesfully on iPad mini 2 and a Nexus 7 2012, but since I have released a 2nd version to the app store, I had reports of crash after assets are rendered to bitmaps (my app display a "rendering assets x/5" on startup). It may be since the first release a week sooner but I had no report from users. So I naturally assumed that this was a memory problem and I reduced memory usage considerably.
But apparently it was not the case, after all I was only using 60MB according to scout... My app still crash on some iPad 3/4, I say some because it maybe inconsistant since Apple reviewers approved the newer version, even after I request an expedited review mentioning the crash on iPad 3/4. I'm totally lost here ! I thought about using the last SDK (13), but it doesn't work with flash pro CC; test / debug crash if it even start (failed launch), exactly like when I try to test / debug in the mobile AIR debug launcher. Please someone help !
I use :
No ANE, greensock lib, Config constants and sharedobject, AIR 4.0.0.1619 sdk.

Any luck with this problem? Does anyone from Adobe even read these forums?
I am trying to find the cause of a problem that sounds very similar. It is an instant crash where the whole game suddenly exits, and it only happens with a release build. The problem can be reproduced 100% reliably on iPad 3, iPad 4 and iPad air, but it does not occur on iPhone 4, iPod 4, and iPad 1.
I set up a lot of logging code to try and pinpoint the location of the crash, by sending the log messages to a webserver. Unfortunately, due to the ridiculous design of forced asynchronous web requests, the log messages arrive in messed up order, making that approach a failure.
My next approach was to use a global error handler, and this works great when I force an intentional crash (eg. var abc:Array = null; abc[123];) but the error handler is never triggered by the real crash I am looking for. wtf?
What are other methods for diagnosing problems in release builds that I might be missing?

Nvidia NVENC and OBS

Hello all!
     I've seen things like this pop up only a few times on forums, but I am having a hard time getting video that was recorded using the Nvidia NVENC codec to play nice with Premiere CC. I've recorded the video portion of a podcast using OBS and would like to use the NVENC encoder because it cuts down on my CPU usage considerably, basically in half. On top of OBS I've got Pro Tools with plug-ins, Skype, and a few other programs open and when using the x264 encoder I hover around 85-90% CPU usage on a i5 4670k, OC to 4.2, 16gb RAM. I ran into the problem last week where I hit max CPU and Pro Tools stopped......not good for a podcast .
     Anyway, the main issue is very sluggish performance in premiere when I load the encoded .mp4 in. It takes a while to load, then when it plays, it thinks about it for a solid 20 seconds, and will play but will not play frames, it will be stuck on a frame and then as the timeline moves it will change to a new frame. The playback is smooth in that the audio plays just fine. Also attempting to render a 3 hour video in this format to anything else takes about 12 hours......:(. I think that's out of the question too. The file does play fine with Media Player or any straight media playback software I have.
     Any tips? Is NVENC just a no go and only suitable for streaming? Thanks!
     PS, I am not interested in rendering to NVENC, my file is already in that format, I have seen the third party renderer already.

Können wir nicht wissen. Du hast keinerlei Versionsinformationen gegeben und auch nicht die exakten Kodierungseinstellungen. Es wird sich jetzt wohl kaum jemand irgendwelche Tools installieren, nur um rum zu experimentieren und dein Problem zu analysieren. Bestenfalls kannst du einen Testclip bereit stellen und vielleicht schaut den sich mal jemand an, aber ansonsten ist das 'ne relativ sinnlose Aktion...
Mylenium

Timed loop and CPU usage

Platform is WIN_XP Pro and machine is a P4 at 2.5Ghz with 512 Mb ram.
LV7.1 + PCI 6229
I am using 50ms Timed loop for running a state machine inside it
and also a whole lot of other things like reading / writing
DAQMx functions; file I/O functions and such. As the
project involves a main and sub-panlel set up local variables
could not be elimnated fully and there should be something like 150 of
them. But not all are accessed always - maybe about 15 of them at any
given time depending on the SM staus.
Problem :
Once started the "Finished late" indication is off and
the actual timing alternates between 49 to 52 ms. The CPU
usage is around 25%.
But as time goes by, the system gets unstable : After 15 minutes
or so, the Finished Late indication is always ON and the CPU usage is
gradually tending towards or exceeds 100%.
Obviously the machine control timing now gets affected and things slow
down badly. Closing the application ands restarting repeats the above
cycle.
I am at a loss to understand what is happening ? WIll
breaking down the single Timed Loop to multiple ones help ? WIll
that be an efficient way of parallel threading ?
I can post the code but its quite large and will do it as a last resort.
thanks
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Hello,
It sounds like an interesting problem. It would be worth some experimentation to figure out what's going wrong - attempting to decouple major "pieces" of the code would be helpful. For example, you could try breaking your code into multiple loops if that makes sense in your architecture, but perhaps you could even eliminate all but one of the loops to begin with, and see if you can correlate the problem to the code in just one of your loops.
Another concern is that you mention using many local variables. Variable read operations cause new buffer allocations, so if you're passing arrays around that way, you could be hitting a problem of forcing your machine to perform many allocations and deallocations of memory. As arrays grow, this can be a bigger and bigger problem. You can use other techniques for passing data around your block diagram, such as dataflow if possible (just simple wires), or queues where dataflow can't dicatate program flow completely.
Hopefully looking into your code with the above considerations will lead you in the right direction. In your case, removing code so that you can identify which elements are causing the problem should help significantly.
Best Regards,
JLS
Best,
JLS
Sixclear

Window Memory usage even after closing windows

I've included links to a test app that does nothing but
launch a window, play a sound, close window / repeat.
When application launches it uses about 20mb of memory. When
you click on the only button, it will launch a secondary window
that will simply play a wav file. (I set the volume low but you may
want to mute it :D)
After launching and closing the window several times the
memory usage goes up considerably and *never* falls back a
significant %. (I got it to about 100MB before I decided to quit
trying to increase the memory usage. Right now it's been running
w/o any user interaction since opening about 10 windows and it's
fairly stable at around 61MB (although that appears to be
increasing w/o user interaction).
Does anyone know of any methods I can use to ensure that the
memory consumed by secondary windows does not just persist forever
even after closing the window? Is there something I'm doing wrong
here?
Example Code:
http://www.vf-server.com/air/memorytest.air
(AIR)
http://www.vf-server.com/air/memorytest.zip
(source ZIP)
Note: When I *minimize* the window it looks like garbage
collection is forced and app drops back to 11MB (on restore back to
19mb).
Edit: note in your task manager, application appears as
JBTest.exe

You can call System.gc() to force the garbage collector to
run.
Try removing the event listeners when they aren't needed
anymore. I think it is more difficult for the gc to cleanup objects
when there are host objects (like Sound) refering to JavaScript
objects and JavaScript objects refering to host objects, so you
need to be especially careful about those. It SHOULD clean them up
eventually, but it may take longer for it to figure out that those
objects are no longer in use.
You might also clear the secondaryWindow reference in the
parent document when the window closes. That reference might retard
garbage collection, too.

High RAM memory usage compared to other systems

I'm suffering with memory usage problems, only in open 2 tabs of facebook(it's only for example, any 'heavy' page freeze also) in firefox*(for example also, but this occur in chromium also) freeze computer.
I've 1GB of memory, it isn't big but also isn't very little.
I'm using XFCE with compiz (yes, compiz, since use a very lightweight openbox-based session doesn't help, then compiz...) when system start (after login) system is consuming 130MB approximately of RAM.
after 1 hour if close all open apps and see memory usage again consume is something about 350MB, "only solution" is reboot.
all applications(htop,free -m,xfce's system monitor...) that I've tried to monitor memory usage show above scenario, except the 'ps_mem' script in AUR.
in the 'ps_mem' script the result is following (with opera browser open, less memory offensive browser but I really prefer firefox):
Private + Shared = RAM used Program
88.0 KiB + 10.0 KiB = 98.0 KiB agetty
380.0 KiB + 34.5 KiB = 414.5 KiB sshd
408.0 KiB + 93.0 KiB = 501.0 KiB gpg-agent (2)
372.0 KiB + 142.0 KiB = 514.0 KiB avahi-daemon (2)
456.0 KiB + 60.0 KiB = 516.0 KiB systemd-logind
280.0 KiB + 261.0 KiB = 541.0 KiB sh
476.0 KiB + 103.5 KiB = 579.5 KiB xfconfd
476.0 KiB + 153.5 KiB = 629.5 KiB gvfsd
604.0 KiB + 34.5 KiB = 638.5 KiB systemd-udevd
588.0 KiB + 102.5 KiB = 690.5 KiB dbus-launch (3)
576.0 KiB + 119.5 KiB = 695.5 KiB sudo
668.0 KiB + 77.5 KiB = 745.5 KiB cups-browsed
620.0 KiB + 179.5 KiB = 799.5 KiB at-spi2-registryd
804.0 KiB + 67.0 KiB = 871.0 KiB htop
756.0 KiB + 131.0 KiB = 887.0 KiB gconfd-2
800.0 KiB + 126.0 KiB = 926.0 KiB upowerd
752.0 KiB + 183.5 KiB = 935.5 KiB xscreensaver
920.0 KiB + 85.0 KiB = 1.0 MiB cupsd
876.0 KiB + 241.0 KiB = 1.1 MiB gvfsd-fuse
692.0 KiB + 429.0 KiB = 1.1 MiB systemd-journald
880.0 KiB + 273.5 KiB = 1.1 MiB at-spi-bus-launcher
1.2 MiB + 125.0 KiB = 1.3 MiB udisksd
1.4 MiB + 486.5 KiB = 1.9 MiB dbus-daemon (5)
1.4 MiB + 533.5 KiB = 1.9 MiB panel-6-systray
1.5 MiB + 430.0 KiB = 2.0 MiB lightdm (2)
1.6 MiB + 572.0 KiB = 2.1 MiB xfce4-session
1.5 MiB + 683.0 KiB = 2.2 MiB panel-5-datetim
1.5 MiB + 706.5 KiB = 2.2 MiB panel-2-actions
1.6 MiB + 723.0 KiB = 2.3 MiB panel-4-systeml
2.0 MiB + 543.5 KiB = 2.5 MiB xfsettingsd
2.0 MiB + 579.5 KiB = 2.6 MiB systemd (3)
2.3 MiB + 815.0 KiB = 3.1 MiB emerald
2.8 MiB + 578.5 KiB = 3.3 MiB gnome-keyring-daemon (3)
3.2 MiB + 946.5 KiB = 4.1 MiB zsh (2)
16.1 MiB + -12144.0 KiB = 4.2 MiB polkitd
4.1 MiB + 465.0 KiB = 4.6 MiB notify-osd
4.5 MiB + 1.6 MiB = 6.2 MiB xfce4-panel
5.1 MiB + 1.2 MiB = 6.3 MiB panel-7-mixer
7.7 MiB + 1.4 MiB = 9.0 MiB xterm (2)
12.0 MiB + 636.0 KiB = 12.6 MiB opera:libflashp
24.3 MiB + -10774.5 KiB = 13.8 MiB Xorg
18.6 MiB + 1.1 MiB = 19.7 MiB gnome-do (2)
23.2 MiB + 2.4 MiB = 25.6 MiB compiz
168.4 MiB + 3.2 MiB = 171.7 MiB opera
320.1 MiB
=================================
as you can see in 'ps_mem' memory usage isn't nothing absurdly it's ok.
another example, this problem stop me make certain things, for example is impossible browsing in web while programming in eclipse, this is very uncomfortable.
other thing, this not occur in Windows XP, I can open more than 10 tabs in firefox, and eclipse open, etc...
any needing information, tell-me!
firefox*: with memory cache turned off in about:config
Last edited by hotvic (2013-08-12 17:42:21)

hotvic, could you please change the title to something more descriptive? 'memory problems' sounds like you have problems e.g. remembering / recalling things, which is not an Arch issue ;P
kenny3794 wrote:
I've had some limiting performance with browsers lately (Firefox and Chromium). I found it had a considerable cache size utilizing lots of fragmented space on my home directory. I cleared the cache and have since set a limit to the cache size of 30 MB for Firefox. Between multiple users across multiple browser sessions, I had at least 2 GB of cache data on my 10 GB home partition! So far (1 day), this has been helpful. Perhaps this could help you also?
Ken
OP is talking about RAM, not HDD space.

High CPU usage (more than 100%) while running video applications

Hello everyone,
I desperately need help with this.
I have a late 2007 White Macbook running Mac OS X 10.6.8 :
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          3 GB
Bus Speed:          667 MHz
The issue that I am having is, whenever I play a video (Netflix/Silverlight player, YouTube, Skype, etc.) the CPU usage shoots up above 100% and the video or the video chat becomes VERY choppy. It becomes impossible to keep going once that starts. Originally I had 1Gb RAM (512 + 512) ... then I upgraded to (1GB + 512mb) ... it was fine for about a year and then started chocking on memory... so recently I made it (1GB +2GB) and that's when this high CPU usage thing started (according to my knowledge)
I have had this machine since last 4 years and its very dear to me. I dont wanna buy a new one. I will really appreciate if someone could help.

I am spending sleepless nights, researching for a fix. From what I found so far, a considerable amount of people were able to fix this issue by simple cleaning the insides of their machines using air dusters, especially the fans. I don't know how cleaning would help with CPU utilization, but by interpolation, I feel it's worth a try. At least it will be clean, if not perfectly functional. lol
Now the next big challenge ahead of me is getting the screws on my Macbook open. I was following the Fan Repair Guide on ifixit.com. I went and got the #00 Phillips screwdriver as suggested in the guide... came home and found out the screwdriver is too big.... went back got a #0000 Phillips (I also found out that screwdrivers with same number might be of different sizes in different stores)... got a couple of screws out and then--- another road-block!! there are a few extremely tiny Phillips screws on my macbook. Now I am hunting for the smallest Phillips screwdriver in the world. Hopefully, I will find it in some watch repair or eye-glasses repair kit in a store such as CVS or Walgreens... aaaah... this is sooo frustrating!!! I just want to get his done so that I can check it off the list of probable solutions that I want to try. Will update here if this works.
From what you say, I think that the Silverlight upgrade might be the culprit in my case too. But the effect is there also for Youtube, Skype , or any other Video/Graphics intensive application that I use. Although, Silverlight/Netflix performs the worst among all the apps.
I love my Macbook... don't want to part with it.

IPhone 4/iOS 5: Constant usage time increase while phone is in standby.

When connected to any of the 3 WiFi access points at my job site, the phone's usage time meter increments constantly even with the phone is in standby. I have tested repeatedly for periods of one hour, and at the end of an hour, there will be only roughly 4-6 minutes of difference between the Usage and Standby meters). The problem does not occur while the phone is connected to my WiFi network at home, and only happens if the phone is set to back up via WiFi on the home network. If I revert to backing up only via USB, the problem goes away. This was happening with iOS 5.0 and continues with 5.0.1 . Any help would be appreciated, since there is considerable battery drain that comes with whatever the phone is doing during this "usage" time, and I've had to resort to turning WiFi on and off constantly while at work.

i would say 15 minutes is enough. if more than that, put to dfu mode back and try restore. extra info if ios 5.1 fail to be downloaded, try read this http://osxdaily.com/2012/03/09/cant-download-ios-5-1-try-these-fixes/

Why is my CPU usage in quicktime on 10.5 so high compared to XP?

I have a 2.0 Ghz mac mini with the GMA950 and a windows XP machine at work with a 2.1 Ghz core 2 duo and the GMA950 also. When I play one quicktime HD movie I have on the mac it uses about 150-175% out of 200% of the cpu but when I play the same file on the XP machine it uses about 30% out of 200% Why is that since they both have the same GPU and almost the same CPU?
Message was edited by: nnickn
Message was edited by: nnickn

The answer is simple I'll tell you.
Because QuickTime for Windows doesn't need to consider much as it in Mac one, if you spent time on Windows you probably found it will crash other programs and even freeze the whole PC, because software in Windows doesn't care each other, they don't know each other, fine! But they don't CARE each other EITHER! That is what Windows all about! So the program can use less CPU power.
But QuickTime for Mac is quite different, QuickTime in Mac considers integrated operation. It will coordinate with other programs in Mac OS perfectly, so you can watch QuickTime movie in four space while click F8 simultaneous, something like that, you got what I mean? But you can NOT do that in any Windows system, not Windows 95/98/XP, even Windows Vista can NOT do that. Guess what? Only a Mac CAN do that.
So, who cares about the usage % of CPU? That's what a CPU born to be so.
Why bothered? You should be happy you have a Mac, not Windows, Windows will never learn its lesson. All you just forgot, Windows is just a complex fat boy copying Mac OS all the time!

High "kernel_task" Memory Usage

Hello All,
I am in need of help. I have a MBP w/Retina from August 2012. It has worked beautifully until a couple of weeks ago (I think maybe when I installed Mavericks), and it then started to slow down considerably.
I have noticed high memory usage by "kernel_task" but have no idea what that is.
See the attached picture to give you the idea. Please help me to get my MBP w/Retina back to being awesome again.
Much appreciated.

hit the command spacebar and see if the spotlight is reindexing.
https://discussions.apple.com/message/23830668
Did you try rebooting your computer?

AVAudioRecorder data usage and sound quality

Witch is the best setting to the right mix of file size(data usage) and sound quality(ability to hear the conversation) when we work with AVAudioRecorder.
Thanks
Willy

AntonBecker wrote:
Alternatively, I can avoid the overage fees by agreeing to change my plan -- increase my monthly allowance -- but I have to pay the difference for all of the months that have already gone by all the way back to the beginning of my contract. In other words, I have to pay for additional GBs for months that are in the past and for which I have no possible way to actually use that data allowance. This is NOT TRUE. You can have the change backdated to the BEGINNING of your CURRENT billing cycle but it WILL NOT go further back than that.
I must say, that as a business model for raking in un-earned revenue, it's pretty impressive. As a customer, though, I'm not terribly impressed.
Does anyone else feel that these practices are just a wee bit unfair, to put it mildly?
I would think that the following would be fair business practices:
(1) If I don't use some GB data allowance, for which I've already paid, then that allowance should roll into the next month OR; Verizon doesn't have roll over minutes and they most likely will not have roll over data.
(2) I should get a refund for data allowance that I don't use. Should you ALSO get a refund for unused minutes while you are at it? I don't watch all of the channels for which my cable company charges me. I would prefer a refund for THOSE before I get a refund for minutes/data from Verizon. I would make a considerably larger refund with that.
(3) Alternatively, since Verizon believes it is OK to charge extremely inflated overage fees, then I feel it's only fair that they refund to me, at that inflated rate, for GBs that I don't use in any given month.
How do the rest of you feel? I feel you should most likely look for a provider which better fits your view on how they should price their service. Good luck.
Sincerely frustrated,
Anton

/N/SAPCEM/EINSAT Usage Statement report - ETM Module

Dear All,
I have searched for any documentaion or details about this report T-Code /n/SAPCEM/EINSAT but could not find any.
Could you please check and explain about thisReport.
How it is calculating percentage? Why it is not coming for all equipments?
Is it linked with PBE?
Thank you in advance,
Regards,
Mohamed

Hi,
The Equipment Usage report will give usage based when the Equipment is in Receipient's Site.
If it is with Admin, it will consider it as idle & also the Status in the Shipping document is also taken into consideration.
It will populate only for which Shipping Documents are there & not for all Equipment.
The report is only ETM relevent. Hope this clarifies your doubts.
MLN Prasad

What is Dynamic Usage Variance in ML?

Hi Experts,
What is Dynamic Usage Variance in ML? How does it effect the Periodic Unit Price calculated at the end of the period?
Regards
Srikanth Munnaluri

Hi,
Distribution of usage variances specially comes in scenarios like Physical Inventory checkup and its adjustments to derive the actual costing.
Physical Inventory documents generally posted to adjust the physical inventory and the inventory as per sap. These total adjustments have to be made based on the quantity consumed on each order. Ofcourse this scenario is project specific.
This ensures auto consideration at the time of determination of periodic unit rate in actual cost run. These adjustments will revaluate the consumption.
This dynamic usage variance is applicable both for the inventory and for activity rates.
U have to maintain the following configuration-
Controlling>Product Cost Controlling>Actual Costing-->Activate Distribution of Consumption Differences
Once these settings are in place, u have to run either some or all of the following--
CKMDUVACT - Distribution of Activity Differences
CKMDUVMAT - Distribution of Inventory Differences
CKMDUVREC - Enter Actual Activity Quantities
if u want view the differences before executing above transactions, u can view by using
CKMDUVSHOW - Display Inventory and Activity Differences
Regards
Sudhakar Reddy
Edited by: Sudhakar Reddy K.V. on Sep 14, 2009 2:11 PM

Usage Considerations

Similar Messages

Maybe you are looking for