Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

Similar Messages

Smart Previews issue. LR5 catalog saying "The file could not be found" for entire collection. How do I "sync" or "find" the smart previews?

I created an LR5 catalog with 1:1 previews and smart previews. I then placed the catalog along with the previews and smart previews files into dropbox.
Came home to work remotely, opened the catalog from dropbox and I can see the photos in library mode. But once I go to develop, LR is saying "The file could not be found"
Smart Preview cache file is there right below the lrcat file.
Anyone know how I can make the catalog find that smart previews cache?

Thanks for the quick response.
There are ? next to the folders but that's to be expected because that drive is not connected to my comp.
And there are exclamation points next to each image.. but again.. drive is not connected. But I've used smart previews before and that was the fix to working without the original raw images available.
However the smart previews don't seem to be working this time as I cannot edit the images.

The disk cannot be partitioned because some files could not be moved

Hi guys,
I removed my bootcamp partition to clear up some temp space and expanded the Mac OS partition up to the fullest size again using Boot Camp Assistant.
The first thing I noticed was that when I restart to computer gets stuck on an ugly BIOS looking screen with a message something along the lines of "no bootable partitions could be found", Easy way round is to hold down the ALT key which brings up a sole Mac OS button to boot from.
Now I try and make a little partition again using the assistant and it won't let me because it says "The disk cannot be partitioned because some files could not be moved". It then advises to back up the disk and use Disk Utility to format it as a single Mac OS Extended volume before restoring again.
Is there anyway to fix this lot without going through doing this.
Will Boot Camp Restore re-instate the OS as well as my user files?

I had a similar problem when I undid my boot camp partition to make it larger. I tried to make it 50 GB which gave me the same error about the files not being able to be moved. I didn't get the "no bootable partitions" error. I changed the size of the partition to 47 GB and ran the boot camp assistant. It stopped while partitioning and I have to force quit to stop it. I restarted the assistant and made the partition a little larger to 48 GB and it partitioned finally. My suggestion is to ry adjusting the size of the partition and see if that allows you to make the partition at least. For you other problem, I'm not sure... From what I gathered from other forums, the drive might be fragmented which causes the partition error. There is no free defragment tool for mac (dunno why) but they exist.

Could not complete the video frames to layers command because the file could not be opened

I recently learned to make gif images using KMPlayer and my Photoshop CS6, but today I hit a snag that I can't seem to get around. Normally I capture a scene from a show DVD I have in KMPlayer and then import the video frames into layers/frames in photoshop with no problem. Well today I went to do that, and captured the scene with what seemed like no problem (the small captured scene saved with no problem) but when I went to CS6 to import the video into layers, I got the error message "Could not complete the video frames to layers command because the file could not be opened". At first I thought it was the KMPlayer saving the files wrong, so I retried and got the same error message. Irestored the players settings back to a default and the file still wouldn't open in photoshop, and then I even tried uninstalling/reinstalling the player trying to get it to work, and then I thought it must be photoshop, because even scenes I had captured at an earlier day that worked perfectly fine when importing would not open.
What could possibly be causing this problem to occur. Should I uninstall/reinstall photoshop and see if that works, or am I doing something wrong?
The files I'm trying to import are AVIs as always, I even tried to capture scenes in other formats to no avail. What could be causing the problem?

I uninstalled an reinstalled photoshop totally and it didn't fix the problem either. I made a post on the KMPlayer's forum hoping for an answer but I haven't recieved one yet. I'm starting to think it's the kmplayer having a problem capturing, since I've started getting the error "could not import the file to layers because the file has no layers" sometimes in photoshop, but I'm still trying to work around in photoshop to see if the problem came from there.

Identify missing files ("The file could not be opened")

Hello,
I purposely deleted photos outside of LR. The photos are still in the catalog. When I attempt to develop a photo in the catalog which I forgot was deleted outside of LR the message "The file could not be opened" appears after a short delay.
This raises the question of how to identify ALL photos in a collection where the source files have been deleted (or otherwise cannot be found) and to mark those items for deletion from the catalog, and subsequently delete them.
Basically I want to assure ONLY those photos that exist (on my drive) are in the catalog.
(I realize there are many instances where on wants to maintain items in a catalog that are archived on other media and not readily available, but that's not what I want here.)
I have LR 1.1 on WinXP Pro with ample memory and disk space.
Thanks in advance for all tips and pointers.

Did you try synchronize folders? Right click on the folder name and select. I haven't done this, but the help says it's supposed to deal with missing files as well as added files.

Every time I try to create a new project it says "The File Could Not Be Opened," how do I fix this?

Every time I try to create a new project it says "The File Could Not Be Opened," how do I fix this?

see if the "oddbal problems" fix helps:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace? The linked images are in Dropbox if that helps.

I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

"The file could not be read due to an error" Opens on one computer, displays this on another.

Hello,
I'm trying to troubleshoot several Illustrator files that won't open on desktops at my company's 2nd office. The files open fine on any desktop at my primary office. When opening the files from the 2nd office, it begins "Reading Illustrator file..." then the message "The file could not be read due to an error" is displayed and the file closes out.
Both offices have the same model desktop and are running:
Adobe Illustrator CS6 (up to date)
Windows 7 x64
Both desktops have the same system fonts and I've tried saving the files locally.
Thanks, Shaun

Hey Jacob and Monika,
Sorry if I wasn't clear, but I did already try saving the files to the hard disk.
"Both desktops have the same system fonts and I've tried saving the files locally."
My fix was copying the content of the files into new, blank .ai files. Those new files open from both offices now.
Still, I wish I could have identified the issue in case it happens again. The error message is vague and there isn't much info on the web about it.
Best, Shaun

Photoshop not importing MOV doc- "The file could not be opened." error

Hello!
I have photoshop CC and I am trying to complete a video project. So far I have searched high and wide to figure out why my .mov doc is not opening on my timeline and gives me an error: "The file could not be opened". I took the video on my iPhone 5 and exported it to a mov file.
On the timeline I click on the movie icon next to the layer name, I click add media, click on my file, then I get the error.
I didn't see that anyone else on the forums have had this same error code so I was wondering if anyone knows what is going on with my system.
I have a brand new iMac... I don't see why I would have these issues.

Nope I havent touched the Documents folder.
Forgot to mention that I'm on Windows 7

Message in Develop "The File Could Not be Opened"

My photos are in an external 500 gig hard drive. I am using a new iMac. In Lightroom when I go to the develop module and select an image I get a message saying The File Could Not Be Opened. I can not do any editing. I can open photos from the hard drive in other programs and edit them but not in the Develop module of Lightroom. I have 1.2 version. I have had this happen before when for some reason the computer could not find the external hard drive. But it is finding it fine.
Gerald

Read Computer Darkroom - Locating Missing Files by Ian Lyons under feature articles and essays.
http://www.computer-darkroom.com/home.htm

"The file could not be opened"

Allright, here comes The Learning Curve.... just downloaded the trial version (CD on order)after using beta 4.1 for awhile. Though I removed the beta version via "add/remove programs", LR 1.0 automatically repopulated the previous images, and now, as I try to use the Develop module, a number of those images come tagged with an edit across the top "The file could not be opened", which inactivates the Develop tools.
This also happened with some of the images that were newly imported into LR 1.0. Any ideas on what I might be doing wrong?

You have to repoint LR to where you moved them. Next time move them in LR, not in Explorer. They probably show a ? on the Grid thumnbail cell. Click it for one and navigate to show Lr where it is and LR should find the others.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

"The file could not be opened" message

I'm a windows pc user with Lightroom 1.1. Today for the first time some of my library folders are in red font, and when I try to work on other images in develop mode I get a "The file could not be opened" message over the image.
I recently exported many of these images and then renamed some of the jpegs. But some that are inaccesable in lightroom I haven't exported or renamed.
Why did this occur and how can I get the files to open again so I can continue working on them?
Thank you!

If the folders show in red, it means that they have been moved or renamed outside of Lightroom. If this is the case right-click on the red folder name and choose "Locate missing Folder". You can then browse to the folder.
If a file has been moved/renamed outside of Lightroom, the frame around the thumbnail will show a "?" at top right. Click on the "?" and click locate on the screen that pops-up.
Adobe's help for this:
http://learn.adobe.com/wiki/display/LR/Locate+missing+photos+-+Basics

"The file could not be opened, there is no handler defined for it"

Hi,
Sorry if my question is not appropriate for this group.
I added a media file(.wmv)in one of the folder of my Web Application,if I try to open from Weblogic Workshop the message "The file could not be opened, there is no handler defined for it", if I added like a reference in a jsp file
<a href = "/Begin/videos/movie_0001.wmv">movie </a>
the browser (The test one or Internet Explorer)open is like "strange" text.
Any help is appreciated.
Thank you,
Mariana

Hello Mariana,
It looks like workshop simply does not support this file extension, I would raise a support case with bea to see if workshop does suppport it or not, or if there are any plans for supporting it in the future.
Cheers
Hussein Badakhchani
www.orbism.com

I get message "the iTunes could not be opened. An unknown error occurred (-50).

I get message "The iTunes application could not be opened. An unknown error occurred (-50).

iTunes Store: "Error (-50)" when downloading purchased content
Try disabling a/v software and turning off the Firewall.
Disable antivirus software
Turn-Windows-Firewall-on-or-off

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Similar Messages

Maybe you are looking for