Usage decision thru QA11 for forcibly give the UD code on a inspection lot

All,
I am trying to do an usage decision through QA11.Where in Batch for respective Inspection Lot we have to find the PD,SLED and NID there .
when i forcibly give the UD code on a inspection lot and save this it will calculate the NEXT inspection Date.But some times the NID value is greater than SLED value after the UD.
My requirment if NID is greater than SLED after UD then give a waring message.
Any suggestions would be appreciated.
Regards,
Sanjit

Hi Sanjit,
You can just try the BAPI: BAPI_INSPLOT_SETUSAGEDECISION
for more help, check the following helpful link:
Re: Stock posting through mb1b
Hope this will help you.

Similar Messages

Regarding problem with updating usage decision in QA11

Hi Experts,
I am trying to use the Bapi "BAPI_INSPLOT_SETUSAGEDECISION" to update the usage decision in QA11 in a proxy. I am not being able to understand what parameters to be used and how.
CALL FUNCTION 'BAPI_INSPLOT_SETUSAGEDECISION'
EXPORTING
    NUMBER               = INPUT-SAP_USAGEDECISION-DETAILS-UD_INSPLOT "inspection lot no from the proxy structure.
    UD_DATA              = lw_data
LANGUAGE             =
IMPORTING
UD_RETURN_DATA       =
STOCK_DATA           =
   RETURN               = li_return
TABLES
SYSTEM_STATUS        =
USER_STATUS          =
Please help.

Hi,
Just pass the inspection lot number to the field NUMBER and try, because there are no standard programs in which this FM is called apart from a Business Object BUS2045, it is called in the method InspectionLot.StatInterface.
You can check that for any clarification, but it is not clear there as well.
Thanks,
Mahesh.

Usage decision in QA11 through BAPI_INSPLOT_SETUSAGEDECISION

Hi Experts,
I am trying to do Usage decision thorugh BAPI_INSPLOT_SETUSAGEDECISION.
I gave the inputs inspection lot and UD code.
I am getting error like this :E QV 045 You cannot make the UD because of 0001 non-valuated Physical samples.
But Functional experts saying that, still we can make UD through QA11by skipping that error.
why can't we do the same in BAPI?
Is there any way to do UD for inspection lot (either by skiping that error or any other way)?
Please help me ?
best regards,
Peddi reddy.

Hi,
Solved with BDC recording for QA11 transaction

Validaing usage decision in qa11

Hi,
My requirement is validate the usage decision in qa11 transaction, if the user select ACCEPT iam checking some conditions and throwing error message so that it will not be save, this is worrking fine.
my problem is if the user want to be remain on same screen after the error message and want to REJECT the lot, after rejecting this SAP meessage is coming like INTERNAL STATISTICS ARE NOT UPDATED. and user is not able to save the REJECT lot.
for rejecting user has to come out of the screen and re enter in to the transaction select the REJET than it is allowing.
after error message is displayed it is not allowing to do any action.
Pleae let me know if any body has coe acrross this.
Regards,
Tirumal.

Hi Tirumal,
I am giving you a perfect solution.
In Include MQEVAF14.
FORM "FORM d0101_pruef_ve".
Create a implicit enhancement at the end of above mentioned form.
Write below mentioned code inside the implicit enhancement.
If rqeva-vcode EQ 'A'.
MESSAGE 'ERROR' TYPE 'E'.
Endif.
Try this.
BR,
Vijay

My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?

Rasco1 it sounds like your managed network needs to be configured to allow you to download successfully. You can find more details in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Fife days App Store not give it to me the verify code, I made I lot email adress, changed and create the new, still the same problem, and this is second one iPad that I bought this month, if not help me I don't know how to deal, thank you in advance

Fife days App Store not give it to me the verify code, I made I lot email adress, changed and created the new, still the same problem, and this is second iPad that I bought this month, if not help me I don't know how to deal, thank you in advance, maybe I will go to shop and want my money back

Do you have a technical question for us volunteer users?

When I give the redeem code from the package I bought today from over an hour away, this is what i get and no forun seems to deal with it nor do I have days to chase adobe down. Oops! This code doesn't seem to be active. Please contact the retailer you p

When I give the redeem code from the package I bought today from over an hour away, this is what i get and no forun seems to deal with it nor do I have days to chase adobe down. Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code. For more information contact Customer Support and order by phone

See if this helps:
https://helpx.adobe.com/x-productkb/global/find-serial-number.html

How to locate the window for entry of the redemption code to get serial number for Adobe Pro XI DVD to activate?

How to locate the window on ADOBE's website for entry of the redemption code contained in the pack slip to obtain the product serial number for Adobe Pro XI DVD to be activated after purchasing from a local retail store?

Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

QA11 - Usage Decision - ask always for characterisitics open

hello.
I want that in usage decision qa11,qa12, always ask me when i have charact. open , altough charact don't be for short duration.
Is it posible??
Regards.
Antonio.

You are correct. If a characteristic is marked as a LT characteristic, it will not cause a warning message at the time of UD even if it is a required characteristic.
Many places make all characteristics as LT simply so they can make changes and corrections to the results after the UD. But this is not how and why LT characteristics were designed by SAP. This is not an SAP best pactice and characteristics should not be set up as LT characteristics unless they are truly LT tests that you don't expect to be available until after the UD. But many consultants don't do this.
But, once having done so, the only solution you have that I can see, is to utilize a user exit to make the checks you want.
FF

Save usage decision from QA11

Hi,
I need to fetch the usage decision and update QMEL table from Transaction QA11.
Can anyone suggest me suitable user exit or BADI?
Thanks in advance.
Partha

Hi Sanjit,
You can just try the BAPI: BAPI_INSPLOT_SETUSAGEDECISION
for more help, check the following helpful link:
Re: Stock posting through mb1b
Hope this will help you.

Usage decision - characteristics relavent for usage decision

Hi friends,
In usage decision screen, either all characteristics are shown or only characteristics relavent for usage decision is shown.
How do we make a charactertics as usage decision relavent, so that it is shown in usage decision screen by default.
Regards
CSN.

hi
either all characteristics are shown or only characteristics relavent for usage decision is shown
Char relevent to UD are except follwing.
1.Char is skip -->you apply DMR for Char or at lot level in task list header or at char level.
2.Required char is not ticked in the Control indicator of cha.that means you have selected Optional char.
3.You have not selected task list indicator in QM view.
These are only possibilities that all char will not appear in the UD screen.
Regards
Sujit

HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your time

This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

Please give the complete code for the below problems with action page and Form.

Create an array, which is holding ‘n’ strings (words), , and implement the functionality to search given string is present in the array. Give an option to the user to enter the word to be searched
Create a static array of ‘n’ numbers , and implement the functionality to search given number is present in the array. Give an option to the user to enter the number to be searched
Implement the functionality to search given word is present with in the predefined sentence. Give an option to the user to enter the word to be searched

As haxtbh has pointed out, these forums are for HELPING you fix code you've already tried and are having issues with. We aren't here to write your code, whether for a project or homework, from scratch. We can only help you if you help us by making an attempt.
V/r,
^_^

When starting iTunes I get error code -42408 but I can start iTunes thru Safari. What is the error code for?

iTunes will eventually tell me that the library was created with a newer version of iTunes but I am using the latest version

Did you uninstall iTunes 11 and replace it with iTunes 10.7? If so, you'll need to go through a few steps to put things right:
Rename "iTunes Library.itl" to some other name;
Copy newst ITL file from the "Previous iTunes Libraries" folder into your main iTunes folder and rename it to "iTunes Library.itl";
Download iTunes 10.7: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Download/install shareware app called Pacifist;
Open Pacifist and, separately, mount iTunes DMG file -- drag iTunes PKG file into Pacifist and install iTunes via the Pacifist application -- be sure to answer yes to replacing everything Pacifist asks about;
Enjoy iTunes 10.7.
Cheers,
trane

Each time I log into the apple store on iTunes (windows), my Ipad or either of my iPhones it asks for verification of the security code on my credit card. This is very annoying, any way to make the entry stick?

Whenever I log into the iTunes store on my Windows PC I am asked to enter my credit card security code, this is annoying but now all of my devices ask for the same information. The trigger seems to be access from another device. Should I deathorize all accounts and then reauthorize them?

Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away.

Usage decision thru QA11 for forcibly give the UD code on a inspection lot

Similar Messages

Maybe you are looking for