Usage of Percentages in exceptions

Hi Guys,
I have little task and want to know if i could use % values to restrict the exception... example
print red color if vaules between 10% and 20%???
green color if vaules between 20% and 30%???
intead of using absolute values..1000 to 15000 etc..
Thanks
peter dent

Hi Peter ,
You sure can use % values to restrict the exception..
You just need to have an extra column where you got the % calculation and then base your exception on that calculated Column..
Hope this helps
Ashish

Similar Messages

I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

High RAM memory usage compared to other systems

I'm suffering with memory usage problems, only in open 2 tabs of facebook(it's only for example, any 'heavy' page freeze also) in firefox*(for example also, but this occur in chromium also) freeze computer.
I've 1GB of memory, it isn't big but also isn't very little.
I'm using XFCE with compiz (yes, compiz, since use a very lightweight openbox-based session doesn't help, then compiz...) when system start (after login) system is consuming 130MB approximately of RAM.
after 1 hour if close all open apps and see memory usage again consume is something about 350MB, "only solution" is reboot.
all applications(htop,free -m,xfce's system monitor...) that I've tried to monitor memory usage show above scenario, except the 'ps_mem' script in AUR.
in the 'ps_mem' script the result is following (with opera browser open, less memory offensive browser but I really prefer firefox):
Private + Shared = RAM used Program
88.0 KiB + 10.0 KiB = 98.0 KiB agetty
380.0 KiB + 34.5 KiB = 414.5 KiB sshd
408.0 KiB + 93.0 KiB = 501.0 KiB gpg-agent (2)
372.0 KiB + 142.0 KiB = 514.0 KiB avahi-daemon (2)
456.0 KiB + 60.0 KiB = 516.0 KiB systemd-logind
280.0 KiB + 261.0 KiB = 541.0 KiB sh
476.0 KiB + 103.5 KiB = 579.5 KiB xfconfd
476.0 KiB + 153.5 KiB = 629.5 KiB gvfsd
604.0 KiB + 34.5 KiB = 638.5 KiB systemd-udevd
588.0 KiB + 102.5 KiB = 690.5 KiB dbus-launch (3)
576.0 KiB + 119.5 KiB = 695.5 KiB sudo
668.0 KiB + 77.5 KiB = 745.5 KiB cups-browsed
620.0 KiB + 179.5 KiB = 799.5 KiB at-spi2-registryd
804.0 KiB + 67.0 KiB = 871.0 KiB htop
756.0 KiB + 131.0 KiB = 887.0 KiB gconfd-2
800.0 KiB + 126.0 KiB = 926.0 KiB upowerd
752.0 KiB + 183.5 KiB = 935.5 KiB xscreensaver
920.0 KiB + 85.0 KiB = 1.0 MiB cupsd
876.0 KiB + 241.0 KiB = 1.1 MiB gvfsd-fuse
692.0 KiB + 429.0 KiB = 1.1 MiB systemd-journald
880.0 KiB + 273.5 KiB = 1.1 MiB at-spi-bus-launcher
1.2 MiB + 125.0 KiB = 1.3 MiB udisksd
1.4 MiB + 486.5 KiB = 1.9 MiB dbus-daemon (5)
1.4 MiB + 533.5 KiB = 1.9 MiB panel-6-systray
1.5 MiB + 430.0 KiB = 2.0 MiB lightdm (2)
1.6 MiB + 572.0 KiB = 2.1 MiB xfce4-session
1.5 MiB + 683.0 KiB = 2.2 MiB panel-5-datetim
1.5 MiB + 706.5 KiB = 2.2 MiB panel-2-actions
1.6 MiB + 723.0 KiB = 2.3 MiB panel-4-systeml
2.0 MiB + 543.5 KiB = 2.5 MiB xfsettingsd
2.0 MiB + 579.5 KiB = 2.6 MiB systemd (3)
2.3 MiB + 815.0 KiB = 3.1 MiB emerald
2.8 MiB + 578.5 KiB = 3.3 MiB gnome-keyring-daemon (3)
3.2 MiB + 946.5 KiB = 4.1 MiB zsh (2)
16.1 MiB + -12144.0 KiB = 4.2 MiB polkitd
4.1 MiB + 465.0 KiB = 4.6 MiB notify-osd
4.5 MiB + 1.6 MiB = 6.2 MiB xfce4-panel
5.1 MiB + 1.2 MiB = 6.3 MiB panel-7-mixer
7.7 MiB + 1.4 MiB = 9.0 MiB xterm (2)
12.0 MiB + 636.0 KiB = 12.6 MiB opera:libflashp
24.3 MiB + -10774.5 KiB = 13.8 MiB Xorg
18.6 MiB + 1.1 MiB = 19.7 MiB gnome-do (2)
23.2 MiB + 2.4 MiB = 25.6 MiB compiz
168.4 MiB + 3.2 MiB = 171.7 MiB opera
320.1 MiB
=================================
as you can see in 'ps_mem' memory usage isn't nothing absurdly it's ok.
another example, this problem stop me make certain things, for example is impossible browsing in web while programming in eclipse, this is very uncomfortable.
other thing, this not occur in Windows XP, I can open more than 10 tabs in firefox, and eclipse open, etc...
any needing information, tell-me!
firefox*: with memory cache turned off in about:config
Last edited by hotvic (2013-08-12 17:42:21)

hotvic, could you please change the title to something more descriptive? 'memory problems' sounds like you have problems e.g. remembering / recalling things, which is not an Arch issue ;P
kenny3794 wrote:
I've had some limiting performance with browsers lately (Firefox and Chromium). I found it had a considerable cache size utilizing lots of fragmented space on my home directory. I cleared the cache and have since set a limit to the cache size of 30 MB for Firefox. Between multiple users across multiple browser sessions, I had at least 2 GB of cache data on my 10 GB home partition! So far (1 day), this has been helpful. Perhaps this could help you also?
Ken
OP is talking about RAM, not HDD space.

How do i change the battery icon to a percentage icon

how do i change the battery icon to a percentage icon

Settings -> General -> Usage -> Battery Percentage (ON)

How to set iPhone 5 to show % of battery usage?

How to set iPhone 5 to show % of battery usage?

Tap Settings App > General > Usage > Battery Percentage > ON.

How to turn off battery percentage on iphone 4 ?

Hi,
Got the new iphone 4 recently. Since the initial set up the battery percentage icon is on. I tried to turn it off through settings- general-usage-battery percentage. But it still shows up. I even rebooted the phone by holding home button and power button. Still the same. How to make my phone not to show the battery percentage? Please help. I am thinking of apple store visit for this but would like to try some fixes before going there.

I just figured it out! I just got my iPhone 4 and restored it from the backup of my once jailbroken iPhone 3G. Same problem as you guys. Was about to restore from scratch but...
Check it out:
Settings > General > Reset > Reset All Settings
You will have to change back a few of your settings but problem solved.

Why does my iphone 4s not display the correct battery percentage? it can get really annoying if it turns off unexpectedly and after that another problem occurs with the phone turning off and on repeadtly

My iphone 4s recently started shutting off and on unexpectedly when updating a whole load of snapchat story's on my feed. However i also have a problem with the battery percentage, i've tried everything with it experimenting all most everything. i even changed my battery twice and i still don't know what to do
someone please help me

Hi 3Kadzo,
Welcome to the Apple Support Communities!
I understand you are having some concerns about the battery usage and percentage displayed on your iPhone 4s. I would suggest the troubleshooting steps in the following article to help isolate and resolve these issues.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
I hope this helps,
-Joe

My iPhone 6 will not show battery percentage at all and keeps vibrate on even when manually turned off and yes I have reset the phone and reset network settings and restored, update etc etc

My iPhone 6 just went funny. It will not show the batter percentage anymore and the alerts are coming through vibrating even when I have switched them off. Please help! :-(

To turn battery percentage back on: Settings>General>Usage>Battery Percentage --switch on.

How can I turn on the percentage battery life on my iP5?

I've just received my iP5 yesterday and I cant find the way to turn on/ enable percentage battery life. can anybody help?

Settings, general, usage, battery percentage on.

3G, iOS4 & Battery Percentage slider

Can anyone tell me why on earth the "Battery Percentage" slider isn't available on the 3G's with iOS4? (Settings > General > Usage > Battery Percentage)

Well I have to say I thought I was loosing my mind. Now I can have peace again. iOS4 on my 3g is terrible . I have to admit I did not expect much, considering this new os was not really intended to be installed on the 3g models, or were they... If I were a gambling man I would wager that, the man brilliant minds involved with the development of iOS4 new the entire time what kind of performance this update would really do to the 3g models. Steve Jobs did make a very very very brief statement to that effect in the keynote address. Could it be that apple just truly wants us all to upgrade to the 4G... hmm
i think i smell a conspiracy.. as for my 3g. my batter was drained after about 5hrs after a full charge.
not a single battery life issue until the update last night. Also the animations of the screens are slow and choppy and freeze up. I am going to reset my phone back to os 3.02 I can wait for my 4g ..

Percentage of battery life remaining although i turned it off

Hi everyone,
I Have an iPhone 5, 16 GB, iOS 6.1.4.
I do not jailbreak !!!
When i go to :
settings - general - usage - battery percentage - off
It dos not turning off.
Any sugestions???
Doron-Andy Brill.
<Email Edited by Host>

Dear sir,
Thats exactliy the problem it dose not turn off the number!!!
The number stays on.
B.T.W Surprisingly i am not the only one.
Any sugestions???

How to get battery percentage? cant find it in settings

Just trying to find in my setting on how to get the percentage of battery power I have and I cant seem to find it. Im probably over looking it.
Can anybody tell me exactly where to go?

Settings - General - Usage - Battery Percentage = On

Battery percentage indicator vs icon

How do I get the percentage (xx%) of battery life to show on my screen? Is it an App I have to download?

Settings -> General -> Usage -> Battery Percentage (ON)

Battery Percentage Indicator

My daughter bought her iphone 4 in December 2010, and has an indicator next to the battery icon telling her the percentage of battery she has left. I bought my phone in February, and I don't have this indicator. Is there something I need to turn on in settings, or is this no longer on the iphones?

Naninok wrote:
My daughter bought her iphone 4 in December 2010, and has an indicator next to the battery icon telling her the percentage of battery she has left. I bought my phone in February, and I don't have this indicator. Is there something I need to turn on in settings, or is this no longer on the iphones?
Settings> general> usage> battery percentage> on
Message was edited by: thekball

Photoshop CS5 very slow performance, MacBook Pro i7

Hi, I've noticed some posts on slow screen redraw, but my issue seems to be with specific performance with web based files having many layers and layer groups.
A sample file is a 27mb psd. It has lot of layers (525), mostly type layers (limited to 3-4 typefaces in the file) and layer groups. If I select a particularly large layer group and try to move it on the canvas, I get the Adobe throbber cursor icon for at least 20 seconds. Even small layer groups bring up the throbber cursor for a few seconds. Overall, things seem much slower than CS4. Not good! And I'm just speaking of basic operations, not hitting intensive tools or major filters yet.
I've looked at the site below, but not much information except the option to purchase some scripts to 'warm-up' Photoshop. After what I spent on Design Premium, I don't think I should have to purchase third party scripts to warm it up. (I did experiment with the tiles option under performance pref's, but upping that made opening files take 2 minutes, where before opening was achieved in 10-15 seconds.
http://macperformanceguide.com/index_topics.html#OptimizingPhotoshopCS5
I have a brand new MacBook Pro i7, 8GB, 7200 internal drive. I installed everything from a fresh install of Snow Leopard. CS4 has never been installed on this Mac.
Any thoughts?

if you have 4GB RAM, the system would need about 1-2GB,
so if you quit all other apps and only run PS, it has 2-3GB RAM left.
you can set RAM-usage in percentage, in the settings menu of photoshop,
i set it to 70%, the rest is for osx.
so lets say PS uses 2GB RAM in your case, the more hires images you open at once and the more layers they have,
and the bigger they are, the 2GB RAM are gone and PS will use the scratch disc for the mentioned images you opened at once, which is also configured in the settings menu. usage of a scratch disc (PS writes data to the scratch disc permanently) will slow down overall performance, it may lagg and everything is slower than before (in my experience). best for scratch disc usage is a separate, fast, internal disc, as huge as possible (50-250GB discsize and empty, no files on it, so that PS can write continously, in order to avoid disc-fragmentation, which would slow down the writing process additionally)
thats the reason i would add 8GB RAM.
RAM is very important for photoshop CS5.
(also processor clock speed and number of cores - in the moment 2 cores are enough
as CS5 isnt optimized yet for more than 4 or 6 cores. more to come soon, i hope...
in my case, i added 24GB RAM, cause i want to avoid usage of a scratch disc at all. this is a huge gain of performance for myself.
i never liked my old scratch disc, as working was terrible slow with it. i also had only 4GB RAM in my last mac, and working was no fun
i work on large format files, 50-100cm at 300dpi and lots of layers, each layer has to be seen like an image itself, so each layer rises RAM consumption.
its a pitty that i never saw adobe delivering some kind of performance guide for photoshop, how to improve performance for professional users, like posting that guide on their main photoshop site, i had to digg for these informations for a long period of time and found it in the end at diglloyd´s comprehensive site. i wonder why adobe makes a secret about photoshop performance, a lot of my friends at work mentioned formerly, that they have had huge lag issues and dont know where to begin solving these problems, which are solvable for sure.... (new hardware, proper settings and so on)
you can read detailed instructions, on how to speed up things in PS here: (where i took it for myself)
http://macperformanceguide.com/index_topics.html
subtopic:
http://macperformanceguide.com/OptimizingPhotoshopCS5-Intro.html
enjoy your new macbookpro!
peter

Usage of Percentages in exceptions

Similar Messages

Maybe you are looking for