USB device not recognized when in Win XP

When I plug my Ipod touch into the computer via the cable, I get an error message
"USB device not recognized". I've tried to delete and reload Itunes, I've reset the Ipod and reset all the original settings. I've tried several of the USB ports and also tried 3 different cords for the Ipod. Can anyone help me??? I can get it to plug into my daughter's computer at her house, but not on my computer... this is getting frustrating!

Thanks for welcoming me... wish I didn't have to come on here though... I wish the IPod(1st gen) was working well. I just downloaded the new Itunes 8.2.1 on my computer when this started. My son-in-law's IPod (2nd gen)plugs in and is acknowledged just fine, for mine, even when I bit the bullet and decided to erase the whole thing and start anew, is still telling me "USB device not recognized". Very frustrating. So it's not only not connecting to my computer, it's now erased. Before I could at least play games, can't do anything now... (sigh)

Similar Messages

  • I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What should I do?

    I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What do I do?

    Is the iPod Touch specifically stated as being compatible?  Have you tried to perfrom a hard reset of the iPod with it still connected?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • "USB device not recognized" when ipod plugged in???

    (ipod mini 4gb)
    When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
    It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
    I've tried eveything on the help website but nothing works! Can anyone help?!
    patriot 3050   Windows XP  

    ok my question is do you have a mac or windows based laptop
    here is why and what happened to my ipod mini
    my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
    so what i did to fix it was this
    i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
    warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

  • "USB Device not Recognized" when shuffle is plugged into computer

    Everytime I plug my shuffle into my Dell laptop it comes up with the message "USB device not recognized". The shuffle doesn't show up in my computer or itunes. I've done some of things that it says to try, but I'd really like to get this fixed and get my shuffle working. Typically when I plug it in, it blinks once, yellow/orange, and then no more, and the notice comes up on the computer screen. If this makes a difference, the shuffle worked fine until last summer when my hard drive crashed. Upon installing a new hard drive, the shuffle began to not work/sync with my computer as it had been before. Any suggestions on how to get my shuffle working again? Much appreciated!

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Perhaps the iPod Shuffle utility might help?
    http://docs.info.apple.com/article.html?artnum=305204
    Patrick

  • Computer says usb/device not recognized when plugged in??

    When I plug in my sons ipod nano 7th generation, just recently says usb/device not recognized and doesn't light up when plugged into the wall either??? Any suggestions??

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • I get the message "USB Device Not Recognized" when I plug in my Shuffle

    Help!! My Shuffle worked for the first 3 months I had it. Now when I try to charge it, I get a message that "USB Device Not Recognized". I can't do anything and iTunes doesn't show any devices for me to sync. Please help if you have any suggestions!

    Hello ematy,
    And welcome to Apple discussions!
    I don't have very many suggestions for you except maybe take a look at and try the suggest troubleshooting steps provided in this Apple support document.
    [iPhone or iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date|http://support.apple.com/kb/TS1538]
    And perhaps this one as well.
    http://support.apple.com/kb/ts1369
    B-rock

  • USB Device Not Recognized when Iphone connected to PC

    Hello,
    Every time I connect my Iphone 4S to my PC I get the error "USB Device Not Recognized". I did not have this problem before. I tried uninstalling Itunes and all its components and reninstalling it, restaring my computer, restarting Iphone and I even reset all the setting on my Iphone. I connected my wife's Iphone 4 using the same cable and PC and connected and started syncing with Itunes right away. If anyone has any pointers on how to fix this problem, any help will be much appreciated.

    try reseting the phone
    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • TS1363 my computer says usb device not recognized when I plug my new i-pod in, why?

    My computer is not recognizing my new i-pod, any cures?

    In iTunes, select "enable disk use" to allow your computer to recognize/detect your ipod. Cheers!

  • USB device not recognized when I connect ipad to computer??

    I haven't had a need to connect it in quite some time, so I don't know what's going on, but my adapter is MIA at the moment, so I figured I'd just connect it to the computer to charge it, but when I plug it in, my computer won't recognize it    anyone have any suggestions as to how to fix this?

    Most USB ports n computers do not provide enough power to charge an iPad. You need to use the wall charger and plug that into a known good wall outlet.
    The iPad will not show up on your computer like a hard drive. Start iTunes on your computer and plug your iPad into the USB port on the computer. You should see the iPad recognized in iTunes.

  • USB Device Not Recognized when direct to computer, works through hub

    I have a rather bizarre problem (which I've already written about on Tom's Hardware) regarding my Samsung Galaxy S III phone and my ThinkPad T440p. At first I thought it was just a driver issue, but now it seems to be more hardware-related.
    As I explained in my other post, the phone works (in both Windows 7 and Linux) when plugged in through a USB hub, but not when connected directly to the computer. My computer is still under warranty (thank goodness), but I'd like to avoid sending it in if possible, as it's my only computer.
    Any suggestions? Thanks!

    I just tried plugging another Samsung phone in with my USB cable and it has the same problem. If I plug it in with another cable though, it works. I use the same cable with my phone and nothing happens. No charging, nothing. At least with my "bad" cable it charges and the computer complains about it.
    At this point I'll get another "Samsung USB cable" (supposed to work, eh?) and see what my luck is. This cable is less than a year old though. I already replaced the original. Maybe Samsung went too cheap again... It wouldn't be the first time. Their push buttons fail left and right.

  • Getting 'USB device not recognized' message when I never did before.

    Hi there
    I am constantly getting a USB device not recognized when I plug in my nano. I never got this before and as a result all it does is charge. It is not showing up in iTunes anymore so I cannot remove or dowload new songs on to my nano anymore. I have tried to go into control panel and the USB Hub device manager to deselect the power outage option but that did nothing. Please help! I seem to encounter trouble with any accessories Apple sell, whether they be earphones or USB cables.
    Thanks

    i'm getting the same problem too.
    my ipod is nearly about 1 year old.
    i use my ipod nano 2GB for music and as a flashdrive to store my uni work.
    this morning accessing my files in the ipod on the computer was fine.
    then later in the afternoon when i connected it into a computer i keep getting the msg 'usb device not recognised'. also itunes dont recognise my ipod either anymore.
    i use Windows XP at home and uni.
    i've tried my ipod on at least three different computers at uni and just tried at home.
    same msg came up 'unknown device' from windows.
    i've read the other posts in the forum and it mentioned about 5 R's and resetting it.
    BUT the main problem is i DONT have any back up of my uni work and files and they are really really important so i CANT reset the ipod otherwise i will lose all the important things...my assignments, projects, photos...I was meant to make a back up b4 i start uni next monday but i guess now is TOO LATE.
    I've noticed that the socket of the ipod dock conector to usb cable, that connects to the ipod is slightly split open.
    Would this be causing the problem?
    I am in Utter Despair and Desperation at the moment.
    Can anyone help me PLEASE?
    i would be sooooo grateful for your kind help and time.
    kind regards,
    a student who is on the verge of a breakdown due to this problem.
      Windows XP   Packard Bell

  • USB device not recognized - ipod video-help!!

    when I connect my ipod video, I get a message "USB device not recognized", when I click, I get: "no drivers installed for this device". I have re-installed the ipod software, reset the ipod and re-installed itunes, just in case. I have been on this problem since Christmas. Any ideas at all, anybody?
    dell   Windows XP  

    I have this EXACT same problem. And my ports are definitely 2.0 USB. I've uninstalled and installed all the iPod, iTunes and Quicktime components at least 4 times. I've reset the iPod. I've read everything I can get my hands on... nuthin'... nada...
    Can anyone help?

  • 3G iPod Touch "USB device not recognized" on any PC

    My 3G been working fine for 1+ yr. Running iTunes 10 on a WinXP system; latest OS (4.2.1?) everything was up to date and working fine. One day I get "USB device not recognized" when I hook it to the PC. Also, when connected to a charger, I don't get the battery screen. It charges either way, but slowly.
    I visited the local Apple store & the guru checked it on her system, with same results. I just reset it, hoping for a miracle, but it still isn't recognized.
    Help?

    Hi Che-Che. I'm having what looks like the same problem. Cannot get this iPod Touch 4th Gen to be recognized on any computer. When I use the white Apple cord that came with it, absolutely nothing happens. Not a sign of being recognized or not being recognized. I brought a third party cable made by Scohche and it is made for iPod, but at least the computer acts like it is starting to load the USB driver, then it fails. The other cable you are talking about, was it an Apple cable? I'm leaning towards it being a faulty Apple cable.

  • Zen Sleek Photo gets USB DEVICE NOT RECOGNI

    I have ZEN Sleek Photo which i use for about a week now.
    Today I connected the player to the computer and got
    "USB DEVICE NOT RECOGNIZED" window in Win XP
    and the Zen Photo froze.
    Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
    It works good as a player but i can't connect it to the computer.
    Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
    ps.
    Hope for an answer
    Thanks in advance,
    Danny
    UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

    fred38 wrote:
    Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
    2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
    THANSKS FRED!
    Danny

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

Maybe you are looking for

  • External Hard drive- NTFS error

    I get this error when trying to install an external hard drive that is formatted in windows NTFS-3G could not mount /dev/disk3s1 at /Volumes/My Passport because the following problem occurred: dyld: Library not loaded: /usr/local/lib/libfuse.2.dylib

  • There was an error opening the document

    I can't read some of scanned PDF documents in my iPad. I am using Adobe Reader version 10.4.3 ( 69879 ). Are there any rules for adobe ipad? Like minimum how many characters for naming the file? or the max size? Why sometimes I can't open my PDF in m

  • Unique Highlighting Elements in Form Fields

    Hi all My boss is asking me to build an interactive PDf file for in-office use that has some unique highlighting features. She wants the viewer to select an option on the PDF file, and when they make that selection, a box or rectangle outlines the ch

  • Replacement for deprecated StringBufferInputStream

    I'm working on something where I need to compare sets of String name/value pairs. Some of the name/value pairs are in a String in java.util.Properties format. My approach has been to use aPropertiesObject.load(new StringBufferInputStream(the_string_w

  • No able to open hierarchy variable in production system

    Hi,     I've have a strange issue in my BEX analyzer 3.5, i have kept product center hierarchy as one of the selection variable for my query, when i click the "Input help" button on my product hierarchy variable, its not opening the window were we ca