USB Hard Disk does not show up

If I open Airport Utility and go to Base Station-->Manual Setup-->Disks, I can see my Maxtor Hard Drive. However, I do not see it on my desktop or in the Airport Disk Utility. Is there something I need to do to access the hard disk? I gave it a password during the initial setup, but I cannot even see the drive anywhere except in Airport Utility.

Yes I did, but the problem was actually just solved by simply shutting my MBP down and restarting. For some reason it wasn't showing up, but now it does. Thanks for the help though. I do appreciate it.

Similar Messages

External hard disk does not show in finder

WD usb external hard disk does not appear in finder. Disk utility sees it and will mount/unmount and eject. I ran repair disk util. and all is well but still does not appear in finder

Hey Hatter, Thanx for the input.
Among other things I tried was a terminal routine someone suggested with no luck and new drivers/firmware for the drive, again, no luck.
I still don't know for sure what caused my problem, but I re-partitioned the drive and re-formatted it and that seemed to solve the provlem. Sadly, I lost all my info that was backed up on that particular drive but hopefully it won't come back to bite me later.
Cheers!!

10.2.8 installation and external hard disk does not show on desktop

I just reinstalled OS X 10.2 (by erasing the hard disk during installation) and upgraded with the Combo pack to 10.2.8 . This is an iMac G4 1GHz with a 17-inch display. I tried connecting a Western Digital MyBook with 500Gb through both the USB port and through FireWire. In both cases the hard drive does not appear on the desktop BUT does appear in the Disk Utility program and in the System Information window. Finder, therefore, doesn't display the drive. The MyBook drive is formatted to Windows FAT 32. Before I reinstalled OS X 10.2.8, this machine was running 10.3.9 and the drive did appear (I'm still searching for the 10.3 disk).
Is this an issue with OS X 10.2.8? Given the drive is detected by the System Information section and by the Disk Utility, is there a way of forcing Finder to display it (and allow access)?

Sometimes I have found that I have to turn of the ext. hd and then reconnect the firewire cables. there is a cylinder that is an inch away from one of the firewire plugs, which should be connected toward the tower and the other firewire plug toward the ext. hd. have patience, sometimes it will show up. also a restart maybe...

Hard disk does not show in finder

WE had a system failure with our server instance a month back and since then, one of my internal HD's will not show in finder. It's also causing carbon copy pro to fail when trying to find it. I have verified it can be seen in the disk utility and from a terminal prompt. I rant this to confirm:
{ diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
No matter what I do, i cannot see it. Verify and repair in disk util come up saying it's okay. I have selected show HDD's in finder preferences. A possibly related side effect is that my users, who can browse this over the network, cannot search in the directory.
Any help you can lend would be helpful.
OSX version 10.8.4
TC

Not partitioned - part of a raid. Was initially formatted, yes. THis has been in production for a couple of years and just dropped out. "THIS DISK" is the disk that vanish. I renamed it for forum purposes.
Results:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS basecampHD              999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:                  Apple_HFS HD2                     999.9 GB   disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk2
   1:                        EFI                         209.7 MB   disk2s1
   2:                  Apple_HFS THIS DISK               1.5 TB     disk2s2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS TTHIS DISK.Backup        1.5 TB     disk3s2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:        CD_partition_scheme                        *217.8 MB   disk4
   1:              CD_ROM_Mode_1 TSIXL-320W              189.7 MB   disk4s0
/dev/disk5
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *3.0 TB     disk5
   1:                  Apple_HFS ServerTime              3.0 TB     disk5s1
No CoreStorage logical volume groups found

Memup hard disc does not show in Finder

I have attached a Memup 250GB hard disk by USB to my MBP. The disk does not show up in Finder, nor in Disk Utility.
The disk works fine if I plug it into a PC. I have formatted it on the PC to FAT.
Any suggestions on how I can get it to work on my MBP?

Sounds like you have a connection issue. Try all the USB ports and a different cable.
Ciao.

External hard drive does not show up

External hard drive does not show up in imovie.

Hi,
Welcome to the Discussions.
The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
John

My external hard drive does not show up on my desktop

My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive and that showed up on my desktop.Any help????

if it is NTFS then you need Paragon Software NTFS for Mac.
NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
If it is not NTFS then you need more details. Need more anyway.
PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

Ibook g3 hard drive does not show up after new installation

I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
Scott

Hey Scott,
The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
Richard

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

Folders that I copy from my Macbook to my External Hard Disk does NOT appear on any other drive that I connect the Hard disk to (TV, PC, ... etc.)

I'm facing a bit of a problem.
Any folder I copy from my Macbook Pro to my External Hard Disk does NOT appear on any other device that I connect the Hard Disk to (TV, PC, etc).
The Hard disk format is "MS-DOS (FAT)".
The folders that are copied from Macbook appear when I connect the Hard Disk to my Macbook only, yet, the folders that I copy from a PC to the Hard Disk appear on Macbook, PC, and TV and are also available from editing from both Mac and PC.
I was advised to install "Paragon" software and I did but I'm not sure how to use it to convert the folders on the hard drive to any format that can be read on other drives or devices (NTFS or otherwise).
I'd appreciate some help. Thank you.

Hi Simon. How is it formatted, FAT or NTFS?
I only ask as OSX will only read NTFS partitions unless you install an App such as Paragon NTFS or Tuxera NTFS.

Software Update reports...Your hard disk does not have enough space

<< Your hard disk does not have enough space-3 B is required to download and install the checked updates. Extra space is required for the optimization process. To free up space, remove files from your startup disk, then try again.>>
I've got 127GB free??!!

I ran the Disk Utility and it said that "The volume Macintosh HD appears to be OK." I tried to proceed with my software update and it still says I dont have enough space. I have 159.7GB availible and the error message says I only need 3.75GB of space. What do I do now?! Thanks in advance for your help!

How do I fix Your hard disk does not have enough free space?

How do I fix Your hard disk does not have enough free space?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the sidebar of a Finder window, and open the Info window. How much space is Available? Specify gigabytes (GB) or megabytes (MB).

External Hard drive does not show up on Disk Utility

I have a External Hard Drive that I used to use on a PC.
Recently, I just bought a new Macbook Pro 13'' and want to transfer my documents from the old PC to the Macbook.
My External HD requires a password that you need to type in in order to access the files.
This password thing runs smoothly on my PC, which I can type in my password and get the files. But when I plugged it into the Mac, it didn't recognize it. It only shows the files .exe... and other that can be run by Windows.
So I formatted the HD (I already back up the data), and put it back to the Macbook, I still cannot open it. The system does recognize the connection but when I opened the Disk Utility while still connecting to the HD, the HD does not show on the left column of the Disk Utility.
Then I'm stuck.
Is there anyone here can tell me what I can/should do?
A girl who spends hours on the internet and still cannot figure out why this sh*t is happening to her.

A lot of external drives use firmware passwords as a protection scheme. To use them on a mac, you need to unlock the drive on a PC (I've done it in a virutal machine before). Once unlocked, you can format the drive for use on a mac. The firmware won't run properly on a mac so your ability to lock the drive from the mac will be gone. You can still lock it from a PC (I think, never tried to firmware lock a drive with a mac partition on it).

External Hard Drive does not show up in Finder

My external hard drive is not showing up in Finder.
It shows up in Disc Utility, but I do not have access to it. I have tried the following:
command-shift c, nothing happens
confirmed in Preferences/General that external hard drive was checked
tried another cable
tried another port on the back of the external drive
tried to connect through the USB port
re-started, etc.

zone-5 wrote:
I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
Just above the list of topics, on the left, is a +Post New Topic+ option.

USB Hard Disk does not show up

Similar Messages

Maybe you are looking for