USB Works in BootCamp+Win But Not in MacOS X !!!

My MP4 player, HSDPA modem built-in drive, and USB pen are not recognized by the Mac OS X 10.4.10 ver.1.1. The devices do appear in System Profile and USB Probe, but not mounted in Finder. The same devices show up in Windows as local drives when it runs with BootCamp!
Anyone can help please?

Which MBP model do you have? Did you upgrade to 10.4.10 or is this the version that was pre-installed? If you upgraded to 10.4.10, then I recommend downgrading to 10.4.9 by doing an Archive and Install:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Similar Messages

I-pod touch works on a Mac but not a PC

Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

Ipod works on one computer but not the other?

Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Try here > http://support.apple.com/kb/TS1538

HT5787 How can I change an old email to a new one? For some reason my old email comes up on my iPhone - and I don't get access to change to my new email which I have on my iCloud account on my pc. My AppleID works on my pc, but not on my iPhone!

How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
Br
Finn

You would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
It works fine through my macbook, can't find anything in settings on iphone to resolve problem

The headset has to have A2DP capability, which most (I believe) do not.
http://en.wikipedia.org/wiki/Bluetooth_profile

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

Did you select View->Bcc Address Field from the menu bar?

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

Magic Mouse One-Finger Swipe Works for one user but not the other

For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

USB Works in BootCamp+Win But Not in MacOS X !!!

Similar Messages

Maybe you are looking for