Use a Parameter or Formula in the Date() function
I am trying to filter a result set utilizing the Date() function. I am trying to get all of the data between June 1st of a given year, and a parameterized date. Here is the formula
{ReportStatic.rpsActualSaleDate} >= Date({@fPrevioustoLastYear}, 7, 1)
and {ReportStatic.rpsActualSaleDate} < DateAdd("yyyy", -2, {?pDateEnd})
and {ReportStatic.rpsSaleStatus} = 1
The value of fPrevioustoLastYear is '2008'
The report is returning 0 records. I think it is because the Date() function isn't recognizing the formula (fPrevioustoLastYear) as a valid input. However when I "Save and close" the formula editor doesn't find any problems with the formula.
What should I be doing differently?
If {@fPreviousToLastYear} is in fact 2008, I don't see an issue (with the possible exception that it should be a number, not a string; convert with CInt()). Please post your formula for that field.
Also, I have to ask what the value of {?pDateEnd} is. If it's like today, no records will fit the criteria because you'd be checking if the date was between 7/1/2008 and 3/29/2008 (you're subtracting 2 years from the parameter), which is a null set.
HTH,
Carl
Similar Messages
-
after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?
Welcome to the Apple Support Communities
By default, Migration Assistant creates a new user account where it puts all the transferred data. Just go to > Log Out, and log in the new user that Migration Assistant has created, so you will be able to access to the transferred data.
If you want to merge the data into the first user account, use the Shared folder (it's in /Users/Shared) to put the transferred files there, and then, on the first user, go to the Shared folder and put all the data in the folders you want -
If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?
Additional information from Linc's post. Basically, only one additional partition can be added to a Fusion Drive and it resides on the HDD.
Do computers that come with a Fusion Drive support Boot Camp?
Yes. Use the Boot Camp Assistant to create a Windows partition and install Boot Camp. The Windows partition will exist on the hard disk drive, not the Flash drive, and is not part of Fusion Drive Logical Volume Group. 3TB Fusion Drive configurations need to update to OS X Mountain Lion v10.8.3 or later to install Windows 8. See iMac (27-inch, Late 2012): Boot Camp alert with 3T hard drive for more information. -
when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?
Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
Writing the file using Write to SGL and reading the data using Read from SGL
Hello Sir, I have a problem using the Write to SGL VI. When I am trying to write the captured data using DAQ board to a SGL file, I am unable to store the data as desired. There might be some problem with the VI which I am using to write the data to SGL file. I am not able to figure out the minor problem I am facing. I am attaching a zip file which contains five files.
1) Acquire_Current_Binary_Exp.vi -> This is the VI which I used to store my data using Write to SGL file.
2) Retrive_BINARY_Data.vi -> This is the VI which I used to Read from SGL file and plot it
3) Binary_Capture -> This is the captured data using (1) which can be plotted using (2) and what I observed is the plot is different and also the time scare is not as expected.
4) Unexpected_Graph.png is the unexpected graph when I am using Write to SGL and Read from SGL to store and retrieve the data.
5) Expected_Graph.png -> This is the expected data format I supposed to get. I have obtained this plot when I have used write to LVM and read from LVM file to store and retrieve the data.
I tried a lot modifying the sub VI’s but it doesn’t work for me. What I think is I am doing some mistake while I am writing the data to SGL and Reading the data from SGL. Also, I don’t know the reason why my graph is not like (5) rather I am getting something like its in (4). Its totally different. You can also observe the difference between the time scale of (4) and (5).
Attachments:
Krishna_Files.zip 552 KBThe binary data file has no time axis information, it is pure y data. Only the LVM file contains information about t(0) and dt. Since you throw away this information before saving to the binary file, it cannot be retrieved.
Did you try wiring a 2 as suggested?
(see also http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=925 )
Message Edited by altenbach on 07-29-2005 11:35 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Retrive_BINARY_DataMOD2.vi 1982 KB -
Hello,
I am trying to build a system that will use a USB 6211 to record sounds from multiple electret microphones and then save the data as a .wav file or other sound file. I have already built my mics and hooked the mics up to the USB 6211; the DAQ device seems to do an adequate job recording the signal - I've recorded from 3 mics at a time at 11,025 Hz, although I don't know how good the signals are since I can't save them for playback after the fact, and they aren't going through my sound card. Ultimately, I would like to save the data as a multichannel audio file which I could then open in a program such as Audacity for further editing and analysis. Since Audacity can import a variety of sound files, my file format doesn't need to be .wav if another format would work better.
Any advice would be appreciated.
Thanks, EricIf you are sampling all three simultaneously, your highest frequency recordable will be (11,025/2)/3, so about 1800Hz and that will pretty coarse (traditionally digital sound recording is at 44Ks/s at the low end). As to converting to a .wav, there are functions on the "Graphics and Sound" palette for saving waveforms to a .wav file.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
Problem inserting date using the date function
Hi there,
I am getting this error The value
"#CREATEODBCDATE(StartDate)#" could not be converted to a date. I
used different methods including the Now() function but getting
always the converted to a date error. The database fields are set
to datetime format with length of 8 bits. The database is sql
server database and the date format I use is
=dateformat(now(),"mm-dd-yyyy")&timeformat(now(),"hh:mm:ss ".
The actual time format the datbase us is the same format except
there is AM or PM after the time, is this one of the reasons?
Thanks for your help.In my SQL Server inserts I insert a date like the the NOW()
function
as
insert into table (col1, date1) values ('texthere', GETDATE()
your issue may be that the insert, update, or delete needs to
be an SQL
command, not
a coldfusion one Coldfusion's now() --> SQL Server's
getdate()
For Updates or deletes, where I want to match a date, I let
CF do a bit of
the work inside the
sql statement....
update table set datefield = <cfqueryparam
cfsqltype="cf_sql_date"
value='#meetdate#'>
(where '#meetdate#' is the form date or date that I want to
update. CF then
verifies it is a proper date structure before attemptint to
save to the SQL
SErver datetime field :)
HTH,
DixieGAl
(although I
"hannash" <[email protected]> wrote in message
news:e98p4j$brc$[email protected]..
| Hi there,
|
| I am getting this error The value
"#CREATEODBCDATE(StartDate)#" could not
be
| converted to a date. I used different methods including the
Now()
function but
| getting always the converted to a date error. The database
fields are set
to
| datetime format with length of 8 bits. The database is sql
server database
and
| the date format I use is
|
=dateformat(now(),"mm-dd-yyyy")&timeformat(now(),"hh:mm:ss ".
The actual
time
| format the datbase us is the same format except there is AM
or PM after
the
| time, is this one of the reasons?
|
| Thanks for your help.
| -
With out using submit button how to retrive the data
at in the combo box if I selects one name automatically that person details to
be retrive from the database and placed at in the other text boxes.
Hi,
You can do it in two ways:
1. You can implement this in having java script function for that radiobutton
on select and then make a call to server, submitting the form data to fetch the
same from database. But in this case, the page will be refreshed.
2. you can have a javascript function and using the same you can open a new window
and then make a call to servlet to fetch the data and to submit to the text field
in the form.
Regards
Srinivas.K
"chiru" <[email protected]> wrote:
>
>at in the combo box if I selects one name automatically that person details
>to
>be retrive from the database and placed at in the other text boxes.
-
Can't use jHeadStart10.1.2 to refresh the data?
I set "JSP" in view type of jHeadStart10.1.2(Developer version 10.1.2).
It couldn't refresh data in the jsp page when I updated the data in the database.
And two different ViewObject(jsp page) using the same EntityObject had the same problem.
It was mean when I updated one of them, the other couldn't refresh at the same time.
But the same problem didn't occur in jHeadStart9.0.5.1.
Did anything need to set up?
Thanks for your help.
HorngDarHorngDar,
I think that what you are running into is the 'caching' of data in ADF BC. By default, ADF will query all iterators in the UIModel needed to show the page, but once an iterator is queried, it will not be queried again unless you write specific code in your DataAction to do so. So if the data in your database can change through other means than the ADF application itself, you should include code to always query the iterator yourself.
The best place to do that is in the prepareModel() method:
protected void prepareModel(DataActionContext daContext) throws Exception
super.prepareModel(daContext);
// Force executeQuery on an iterator
JUIteratorBinding ib = getBindingUtils().findIterBinding(daContext.getBindingContainer(), "<youriteratorname>");
if (ib != null)
ib.getRowSetIterator().getRowSet().executeQuery();
else
log.error("Iterator not found, check the name");
This is just an example, which assumes there is only one iterator for which changes on the database may occur. You could write more generic code to query all the IteratorBindings in the current UIModel, but of course there are performance impacts so I would suggest to do this as little as possible.
Hope this helps,
Peter Ebell
JHeadstart Team -
hello,how can i find the weeks pass the date what i input,if have any functions?
for example,i creat one PO on 2006.8.7,next time,i will judge the PO was pass 4 weeks.Hi,
DATA: weeknum1 LIKE SCAL-WEEK,
weeknum2 LIKE SCAL-WEEK,
week_diff type i.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
date = '20060907'
IMPORTING
WEEK = weeknum1
EXCEPTIONS
DATE_INVALID = 1
OTHERS = 2.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
date = '20060807'
IMPORTING
WEEK = weeknum2
EXCEPTIONS
DATE_INVALID = 1
OTHERS = 2.
week_diff = weeknum1 - weeknum2.
write : 'No of weeks pass ' , week_diff.
Rgds,
Shakuntala -
How to use a variable multiple times in the data flow
DECLARE
@StartTime datetime,
@EndTime datetime
SET @StartTime = (SELECT MAX(AvailDateTime) FROM dbo.Fact)
SET @EndTime = (SELECT MAX(AvailDateTime) FROM dbo.Product);
--DATEADD(day, 1, @StartTime);
--PRINT @StartTime
--PRINT @EndTime;
WITH
dates AS (
SELECT DATEADD(Minute,5,@StartTime) AS [date]
WHERE DATEADD(Minute,5,@StartTime) <= @EndTime
UNION ALL
SELECT DATEADD(minute, 5 ,t.date) AS [date]
FROM dates t
WHERE DATEADD(minute, 5, t.date) <= @EndTime
I have the above sql, in this I'm using the 2 variables and calling @Starttime Variable couple of time. How should I build the SSIS package based on this query? how can I call the same variable in different place? how will SSIS take it?
ThanksSince you have the variables set in code you just can place this code into the SQL code section of say an OLEDB source
like there
or -
How to use case and decode to extract the data
Hello PL/SQL Gurus,
I am using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production version
I have a table in following format -
drop table TT2;
create table TT2(College, Class,gender,status,fees) as select
'IITB','MBA','M','P',255600 from dual union all select
'IITK','MTech','M','P',300000 from dual union all select
'IITD','MBA','F','P',450000 from dual union all select
'IITKH','MBA','F','P',350000 from dual union all select
'IITC','MTech','F','P',420000 from dual union all select
'IITB','MTech','M','P',185000 from dual union all select
'IITC','MTech','M','P',235000 from dual union all select
'IITD','MBA','F','F',175000 from dual union all select
'IITM','MBA','M','F',257000 from dual union all select
'IITKH','MTech','F','P',335000 from dual union all select
'IITD','MBA','F','P',540335 from dual union all select
'IITC','MBA','F','F',125089 from dual union all select
'IITD','MTech','M','P',290756 from dual union all select
'IITM','MBA','M','P',200000 from dual union all select
'IITKH','MBA','F','F',534990 from dual union all select
'IITD','MBA','F','P',221000 from dual ;some of the extraction conditions are as following -
CASE CONDITION
College in 'IITB' and status='P'- 'WestRegion Passed'
College in 'IITC' and status='P'- 'SouthRegion Passed'
College in 'IITD' and 'IITK' and status='P' and Gender='F' - 'NothRegion Female Passed'
College not in 'IITK' and status='F' - 'Ex Kanpur Failed'
Expected output -
Region Statnding Fees
WestRegion Passed 440460
SouthRegion Passed 655000
NothRegion Female Passed 1386335
Ex Kanpur Failed 1092079SQL Used
I am using the following query which only make sure of case but this is not how i want the output , if i try to use the case within decode then how to work on this -
SELECT (CASE WHEN College in ('IITB') and status='P' then sum(fees) else 0 end) WP,
(case when College in ('IITC') and status='P' then sum(fees) else 0 end) SP,
(case when College in ('IITD','IITK') and gender='F' and status='P' then sum(fees) else 0 end) NFP,
(case when College in ('IITK') and status='F' then sum(fees) else 0 end) ExKF
FROM
TT2
GROUP BY College, Class,gender,statususer555994 wrote:
Thank you so much jeneesh i am really thankful to you ...vov.
one more query in case if any of the selection don't have the output data , then values will be displayed like -One way..
with t as
--"Add all your descriptions
(select 'WestRegion Passed' region_standing from dual union all
select 'SouthRegion Passed' region_standing from dual union all
select 'NothRegion Female Passed' region_standing from dual union all
select 'Ex Kanpur Failed' region_standing from dual)
select region_standing,sum(fees) fees
from (
(SELECT CASE WHEN College in ('IITB') and status='P'
then 'WestRegion Passed'
when College in ('IITC') and status='P'
then 'SouthRegion Passed'
when College in ('IITD','IITK') and gender='F' and status='P'
then 'NothRegion Female Passed'
when College in ('IITK') and status='F'
then 'Ex Kanpur Failed'
else 'Others' end region_standing,
sum(fees) fees
FROM TT2
GROUP BY CASE WHEN College in ('IITB') and status='P'
then 'WestRegion Passed'
when College in ('IITC') and status='P'
then 'SouthRegion Passed'
when College in ('IITD','IITK') and gender='F' and status='P'
then 'NothRegion Female Passed'
when College in ('IITK') and status='F'
then 'Ex Kanpur Failed'
else 'Others' end
union all
select region_standing,0
from t
group by region_standing;
REGION_STANDING FEES
Others 2567835
NothRegion Female Passed 1211335
WestRegion Passed 440600
Ex Kanpur Failed 0
SouthRegion Passed 655000
{code}
Edited by: jeneesh on Nov 5, 2012 5:07 PM -
BAPI commit without using Wait? need to get the data for created order
I am using BAPI to create or change sales order and by using 'BAPI_TRANSACTION_COMMIT' updating the database.
Immediately after that there is some requirement to fetch VBAP with the created order number, but there is no data found.
If i use call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
then i am able to fetch data from VBAP, but its impacting the performance. Is there any alternative way to get data without fetching or without using wait.
Can i use ABAP memory or SAP memory to get the details?
Please help...........Hi Tapas379,
Yes technically you can:
set data before commit
DATA memory_id(20) TYPE c.
CONCATENATE 'VBAP_01_' sy-uname INTO memory_id.
DELETE FROM DATABASE indx(as) ID memory_id.
EXPORT vbap_tab = vbap_tab "<-input
TO DATABASE indx(as)
CLIENT sy-mandt
ID memory_id.
Get data from anywhere after setting it.
data memory_id(20) type c.
concatenate 'VBAP_01_' sy-uname into memory_id.
import vbap_tab = vbap_tab " ->output
from database indx(as)
client sy-mandt
id memory_id.
delete from database indx(as) id memory_id.
Thanks,
Duy -
How to use a km service to show the data of collaboration rooms.
I follow the method in documents:
import com.sapportals.portal.prt.runtime.PortalRuntime;
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
and cast Exception come out, means can not transfer to IRooms
And I alse wonder why PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID)'s return type is IService, but IRooms is not extends from IService ,how can casting succesussful......I follow the method in documents:
import com.sapportals.portal.prt.runtime.PortalRuntime;
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
and cast Exception come out, means can not transfer to IRooms
And I alse wonder why PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID)'s return type is IService, but IRooms is not extends from IService ,how can casting succesussful...... -
When browsing on the Apple TV menu the remote affects my MacBook Pro and changes it to video mode even if not connected with the Apple TV
Welcome to the Apple Support Communities
In that case, just disable the IR port of the MacBook Pro > http://support.apple.com/kb/PH7234
If you are using OS X Mountain Lion, you have to go to System Preferences > Security & Privacy > Advanced
Maybe you are looking for
-
External/Exec event example needed
I'm using Acrobat 7. I have a form with interactive fields and scripts that loads from a web server. Using the FDF URL extension it also loads some data into the form. For example: http://192.168.30.106:8080/qforms/pdfs/30799_Appraisal_Form_Template.
-
Change battery_bar color automatically in conky
Hi, it's possible to change the color of battery_bar (in conky) when the battery level drops below a certain threshold? Thanks.
-
Details: i have 15 dollar but i cant by gem on clash of clansgame when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem
-
Hallo Can anyone help me how to display popup error message in webinterface before saving data, My requirement is to save data only if certain condition is met otherwise i need to display error message to user . Rds Hans
-
HP ENVY 17t-j000 Quad Edition Notebook PC- CPU upgrade or SSD boot drive ?
ENVY 17t-j000 Quad Edition Notebook PC Components: • Windows 8.1 64 • 4th generation Intel® Core™ i7-4700MQ Processor • Included 2 Year Warranty • Intel® HD Graphics • 17.3-inch diagonal Full HD Anti-glare LED-backlit Display (1920 x 1080) Non touch