Use fileTable Sql in c#
hi.can i help me?
problem:
I stored user's photo in filetable but how read each user's photo and it shows to the user?
i dont want it show for all user,only one user's photo show to one user. ok.
You may find this helpful:
http://blogs.msdn.com/b/bethmassi/archive/2012/11/22/building-an-html-client-for-a-lightswitch-solution-in-5-minutes.aspx
It shows an application that allows you to upload photos and associate them with a Project.
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com
Similar Messages
-
Using a SQL data source and XML data source in the same template
I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
RhondaHi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim -
How can i use one SQL statement to solve problem?
How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET f = SUBSTR(f,
1,
length(f) - 2) || '01'
WHERE substr(f,
-2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET f = SUBSTR(f,
1,
length(f) - 2) ||
DECODE(SUBSTR(f,
-2),
'00',
'01',
SUBSTR(f,
-2)); -
Using a SQL Query in an Alert and Matching a String
I've created an alert in 12.0.4 using a SQL Query and the field that I'm trying to match is a string. Originally the query returned multiple rows but when the alert still didn't fire, I modified the query WHERE clause to return only one row:
NAME RESPONSE
Are area lights working? No
My expression in the metric is RESPONSE. In the Monitor I'm matching a string equal to No. (Do I need double quotes around the matchvalue? Single quotes? No quotes?) The metric is in the 15min scan group, the role is xMII Developers and I'm in that role. The monitor alert string is ' = '. Both metric and monitor are active and I've subscribed to the monitor. Other alerts in the 15min scan group (all based on tag queries) are firing off properly.
Why is nothing showing up in the Alert Log?
David MacindoeDavid,
Did you figure out the answer? If not, I will try to find someone to address your question.
Mike -
How can we update data in LDAP server using PL/SQL.
Hi,
How can we update data in LDAP server using PL/SQL program.
Is there any sample code for refrence.
Thanks,
TarunHi Justin,
Thanks for your help. You got my correct requirements.
Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
I have the following information:
the admin user and password,server info , port and ldap_base for admin.
I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
Please help me.
Thanks,
Edited by: james. on Jan 12, 2009 5:39 PM -
How can I create an csv/excel file using pl/sql and then sending that file
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244} -
Can we use Dynamic SQL in Oracle Reports ?
Hi ,
Can we use Dynamic SQL in Oracle Reports ?
If yes please give some examples .
Thanx
sriniI believe the built-in package SRW.Do_Sql is what you are looking for
Example from the document:
/* Suppose you want to create a "table of contents" by getting the
** first character of a columns value, and page number on which its
** field fires to print. Assume that you want to put the "table of
contents"
** into a table named SHIP. You could write the following construct:
DECLARE
PAGE_NO NUMBER;
PAGE_FOR INDEX NUMBER;
SORT_CHAR CHAR(1);
CMD_LINE CHAR(200);
BEGIN
SORT_CHAR := :SORT_NAME ;
IF :CALLED = Y THEN
SRW.GET_PAGE_NUM(PAGE_FOR_INDEX);
SRW.USER_EXIT(RWECOP PAGE_FOR_INDEX
P_START_PAGENO);
SRW.MESSAGE(2,TO_CHAR(:P_START_PAGENO));
END IF;
SRW.GET_PAGE_NUM(PAGE_NO);
CMD_LINE := INSERT INTO SHIP VALUES
(||SORT_CHAR||,||TO_CHAR(PAGE_NO)||);
SRW.MESSAGE(2,CMD_LINE);
SRW.DO_SQL(CMD_LINE);
COMMIT;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
NULL;
WHEN SRW.DO_SQL_FAILURE THEN
SRW.MESSAGE(1,FAILED TO INSERT ROW INTO SHIP TABLE);
WHEN OTHERS THEN
COMMIT;
END; -
Urgent HELP required on forming the Matrix of data using PL/SQL
Hi All,
I'm new to this thread and require your urgent help in this regard.
I've got a requirement for building a 5000 X 5000 matrix using PL/SQL. My original data tables have 5000 rows each and I need to do a correlation analysis using this data and need to store in a physical table and not in-memory. Is this feat achievable using mere PL/SQL? I understand that Oracle DB has a limitation of 1000 columns(but not sure) and hence I'd like to know whether there is any work-around for such scenarios. If not, what are the other alternative method(s) to achieve this feat? Do I need to use any 3rd party tools to get this done? An early reply from the experts is highly appreciated.
Thanking you all Gurus in advance.
Rgds
SaiWelcome to OTN!
I'll get to your quesiton in a moment, but first some welcome information. Many OTN posters consider it impolite to mark threads as "urgent". We are volunteers and have jobs of our own to do without people we don't know making demands. You are brand new and deserve some patience but please understand this. It is very likely before I finish this post someone will complain about the word "urgent" in your subject.
On to more interesting things :)
You can do the matrix, but are out of luck with a 5000 x 5000 table because Oracle only allows 1000 columns per table. There are ways to work around this.
How do do the matrix depends on what you want to do. You can do this different ways. You can create a table beforehand and use PL/SQL or simple SQL to populate it, or use the CREATE TABLE AS syntax to create and populate it in one step if you can get the underlying SQL to work the way you want, something like
create table my_table as
select a.*, b.*
from table1 a, table2 bcan populate a matrix from 2 tables with an intentional cartesian join (the WHERE clause was left out intentionally, provided your data is already in the data base.
If not you can use a PL/SQL routine to populate the data.
There are a couple of ways to solve the 1000 column limit. The easiest way might be to have 5 collections of 1000 columns each. A more complicated but more elegant soltion would be to have nested collections, allowing 2 colliections that you can loop through - a collection of collections. Nested collections can be hard to work with. A third way would be to use nested tables in the database but I personally do not like them and the insert, update, and delete statements for nested tables are hard to use.
I'm not going to give a code example because I am not sure which solution is best for you. If you have further questions post them. -
Can anybody please send me a small program on How to Use Dynamic SQL.
How to execute and run give details.
Thanks
nullYou can certainly use the INTO (and USING) clauses of EXECUTE IMMEDIATE to pass in and return data, i.e.
EXECUTE IMMEDIATE sqlStmt
USING variable1, variable2
INTO output1, output2The more complex the statement, however, the more appropriate DBMS_SQL is. DBMS_SQL also has the potential to allow you to use bind variables rather than reparsing the statement many times.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64
Hi Everyone,
I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
An error was encountered performing the required operation Got a minus one from read call .Vendor code 0
However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
My TNSNAMES .ora file is as follows:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORACLE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
My Listener.ora file is as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(SID_NAME = Oracle)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
ADR_BASE_LISTENER = D:\app
My Sqlnet.ora file is as follows:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
ORA 12537 : TNS Connection closed
Thanks for your patience and help in advance.
---PrashantHello Irian and Sue,
I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
Used parameter files:
D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
*)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
TNS-12537: TNS:connection closed
Thanks for your response to my initial post.Do u have any other methods to resolve this? -
Sending email using PL/SQL based on a query result
Hello all,
I want to create a procedure using PL/SQL, based on a query result.Here is the scenario:
I have multiple tables in Target and Source databases that I want to compare(not the whole table but queries on these tables) and if they differ, I want to shoot an email. I have some ideas how to implement this but not sure whether it is the best approach.
select Acct_id, total from SourceTableA
minus
select Acct_id, total from TargetTableA
select Acct_id, sum from SourceTableB
minus
select Acct_id, sum from TargetTableB
If the result of any of above queries > 0 then I want to shoot an email and want to repeat this procedure in the morning every day.
I know how to implement send_mail procedure using UTL_SMTP package and how to schedule tha job by dbms_job package. But I am not sure how to implement the result of minus query. In case if minus > 0 then I also want to send the name of tables in the email message where source and target tables are not same. Should i use cursor, variable or insert the result in a new table? any help would be highly appreciated. Thanks in advance.
KhanActually these queries are the part of our daily testing that we run everyday manually(after the scheduled ETL load) to see if there are any discrepencies between our datawarehouse tables and source tables. So instead of running these queries manually everyday we want to schedula a procedure that will shoot an email in case of any discrepency and indicate which tables have problems.
-
Is one able to use PL\SQL code in a report. I would like to have a procedre which runs off a bind variable if possible?
ThanksUnfortunately, if you are on 1.5.0 or 1.5.1 this report style won't work (there is a bug that removes all of the ;s from the PL/SQL code). According to Re: Report style plsql-dbms_output - bug this is fixed in 1.5.3, when that is released.
theFurryOne -
Hi,
I have bit experiment create custom reports using PL/SQL region
http://dbswh.webhop.net/apex/f?p=BLOG:READ:0::::ARTICLE:97800346956448
I would like have from you tips and ideas how enhance this.
Because I'm not so good with SQL,
I really appreciate if you have tips enhance performance for query used for cursor.
/* Report query */
l_sql := '
SELECT * FROM(
SELECT a.*, row_number() OVER (ORDER BY '
|| l_sort_col
|| ' '
|| l_sort_ord
|| ') rn, COUNT(1) over() mrn
FROM(' || l_sql || ') a
) WHERE rn BETWEEN ' || l_start_row || ' AND ' || l_last_row
; Regards,
JariHi Jari
I'm guessing you're trying to do paginated grid data or somewthing similar? You could try something like this...
l_sql := 'SELECT * '||
'FROM ('||
'SELECT /*+ FIRST_ROWS(n) */ '||
'a.*, ROWNUM rnum '||
'FROM ('||l_sql||' '||
'ORDER BY '||l_sort||' '||l_dir||') a '||
'WHERE ROWNUM <= '||l_max_row||') '||
'WHERE rnum >= '||l_start;The variables would be initialized in the procedure as follows...
l_max_row := p_start + p_limit;
l_start := p_start + 1;
l_sort := NVL(p_sort,'1');
l_dir := NVL(p_dir, 'ASC');My application process would be called something like follows, to spit out a JSON object...
BEGIN
htp.p(wwv_flow.g_widget_num_return||'(');
munky_extjs.grid_json(p_app_id => wwv_flow.g_x01,
p_app_page_id => wwv_flow.g_x02,
p_region_id => TO_NUMBER(wwv_flow.g_x03),
p_start => NVL(wwv_flow.g_x04,0),
p_limit => NVL(wwv_flow.g_x05,10),
p_sort => wwv_flow.g_x06,
p_dir => wwv_flow.g_x07);
htp.p(')');
END;I think your use of analytics in the inner query may be slowing you down if you have a lot of data?
Cheers
Ben -
Getting core dump when using EXEC SQL CLOSE
In my pro*c program , i have used a cursor to fetch the set of accounts.Once cursor is opened , code will perform set
of operation using fetched data and then cursor is closed. Between open and closing of cursor , i have used 23 EXEC
SQL CLOSE. For example i am copying the value of a to b using strlcpy between fetch and close cursor statement.If
returned value from strlcpy is greater than size of destination variable, then flow should not proceed , in that case I will
close the cursor using EXEC SQL CLOSE and return the flow to calling program. Similarly i have closed the cursor at
another 22 locations.
When i compile the code and run binary the core dump occurs. On analyzing the core it shows
t@null (l@8) terminated by signal SEGV (no mapping at the fault address)
0xffffffffffffffff: <bad address 0xffffffffffffffff>
dbx: core file read error: address 0xfc4ffe48 not in data space
Current function is dbMtBaseClass::Pswd_Change
7860 sqlcxt(&_dbMtCtx, &sqlctx, &sqlstm, &sqlfpn);
if I remove any of the three EXEC SQL CLOSE commands , core dump does not occurs.
It looks strange.Please help me to resolve the issue.In my pro*c program , i have used a cursor to fetch the set of accounts.Once cursor is opened , code will perform set
of operation using fetched data and then cursor is closed. Between open and closing of cursor , i have used 23 EXEC
SQL CLOSE. For example i am copying the value of a to b using strlcpy between fetch and close cursor statement.If
returned value from strlcpy is greater than size of destination variable, then flow should not proceed , in that case I will
close the cursor using EXEC SQL CLOSE and return the flow to calling program. Similarly i have closed the cursor at
another 22 locations.
When i compile the code and run binary the core dump occurs. On analyzing the core it shows
t@null (l@8) terminated by signal SEGV (no mapping at the fault address)
0xffffffffffffffff: <bad address 0xffffffffffffffff>
dbx: core file read error: address 0xfc4ffe48 not in data space
Current function is dbMtBaseClass::Pswd_Change
7860 sqlcxt(&_dbMtCtx, &sqlctx, &sqlstm, &sqlfpn);
if I remove any of the three EXEC SQL CLOSE commands , core dump does not occurs.
It looks strange.Please help me to resolve the issue. -
Using a SQL for Oracle in Microsoft Excel Query
I am having the most difficult time (in fact, I can't get it to work) trying to use an SQL I created in Toad for Oracle. It works fine in Toad for Oracle...gives me all the data I need. I am trying to use it in Excel for users that don't know SQL or Oracle so they can use the query to extract data they need for Charts, Graphs, etc.
Here is the SQL code from Toad for Oracle:
/* Formatted on 2006/09/22 11:42 (Formatter Plus v4.8.6) */
SELECT a_compl_summary.incident_number, a_compl_summary.case_number,
a_compl_summary.part_sequence, a_compl_summary.part_number,
a_compl_summary.lot_number, a_compl_summary.alert_date,
a_compl_summary.entry_date, a_compl_summary.NAME,
a_compl_summary.MONTH, a_compl_summary.product_family,
a_compl_summary.complaint, a_compl_summary.reportable,
a_compl_summary.product_returned, a_compl_summary.case_desc,
a_compl_summary.failure_invest_desc, a_compl_summary.lhr_search,
a_compl_summary.root_cause, a_compl_summary.corrective_action,
a_compl_summary.region,
rp_qa_reported_device_codes.reported_device_code,
rp_qa_reported_device_codes.reported_dev_clarification,
rp_qa_reported_device_codes.reported_dev_code_desc,
rp_qa_patient_codes.patient_code,
rp_qa_patient_codes.patient_code_clarif,
rp_qa_patient_codes.patient_code_severity,
rp_qa_patient_codes.description
FROM chsuser.a_compl_summary,
chsuser.rp_qa_patient_codes,
chsuser.rp_qa_reported_device_codes
WHERE ( (a_compl_summary.product_division = 'CP')
AND ( a_compl_summary.entry_date >= :date1
AND a_compl_summary.entry_date <= :date2
AND ( a_compl_summary.product_family LIKE :pf1
OR a_compl_summary.product_family LIKE :pf2
OR a_compl_summary.product_family LIKE :pf3
OR a_compl_summary.product_family LIKE :pf4
OR a_compl_summary.product_family LIKE :pf5
AND (a_compl_summary.region = :r1)
AND ( a_compl_summary.NAME = :c1
OR a_compl_summary.NAME = :c2
OR a_compl_summary.NAME = :c3
OR a_compl_summary.NAME = :c4
OR a_compl_summary.NAME = :c5
AND (a_compl_summary.complaint = :yorn)
AND ( rp_qa_reported_device_codes.reported_dev_clarification LIKE
:cl1
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
:cl2
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
:cl3
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
:cl4
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
:cl5
AND (rp_qa_reported_device_codes.reported_dev_clarification NOT LIKE
:dc1
AND (a_compl_summary.incident_number =
rp_qa_patient_codes.incident_number
AND (a_compl_summary.case_number = rp_qa_patient_codes.case_number)
AND (a_compl_summary.part_sequence = rp_qa_patient_codes.part_sequence
AND (a_compl_summary.incident_number =
rp_qa_reported_device_codes.incident_number
AND (a_compl_summary.case_number =
rp_qa_reported_device_codes.case_number
AND (a_compl_summary.part_sequence =
rp_qa_reported_device_codes.part_sequence
AND (rp_qa_reported_device_codes.incident_number =
rp_qa_patient_codes.incident_number
AND (rp_qa_reported_device_codes.case_number =
rp_qa_patient_codes.case_number
AND (rp_qa_reported_device_codes.part_sequence =
rp_qa_patient_codes.part_sequence
)Can someone help me...maybe point out what I'm doing wrong.
Note: I also tried creating this query in Microsoft Query (the simple way) and when I first create it...it works...But then if I go back in to edit the query, and refresh the query or try to Return data to Excel, it gives me a ORA-00936 error message.
Why it works when I first create the query in Excel, I don't know. But I have to validate the queries I'm creating (SQL or not) and I can't validate it if every time I go into edit the query (which may have to happen; that's why I have to fix this before I can submit my validation).
Anyway, any help would be greatly appreciated.Okay, I know I'm replying to my own threads here...but I want to add a little bit more information again.
I was successful in figuring out that changing the :criteria to a ? worked.
I tested this on 1 criteria at a time. Adding one more scenario ? at at time.
It only worked up until about 3 scenarios of each criteria.
Then when I refreshed the query in Microsoft Excel Query, I got an "out of memory" error, and then it ended up just erasing the SQL I had been using.
Here's the SQL I had where it gave me this error. Am I possibly just making Excel work too hard? It just doesn't make sense because Toad for Oracle handled it in like 4 seconds. Which brings me back to an intial question I had. Can Excel use Toad for Oracle somehow?
Here's the code:
SELECT a_compl_summary.incident_number, a_compl_summary.case_number,
a_compl_summary.part_sequence, a_compl_summary.part_number,
a_compl_summary.lot_number, a_compl_summary.alert_date,
a_compl_summary.entry_date, a_compl_summary.NAME,
a_compl_summary.MONTH, a_compl_summary.product_family,
a_compl_summary.complaint, a_compl_summary.reportable,
a_compl_summary.product_returned, a_compl_summary.case_desc,
a_compl_summary.failure_invest_desc, a_compl_summary.lhr_search,
a_compl_summary.root_cause, a_compl_summary.corrective_action,
a_compl_summary.region,
rp_qa_reported_device_codes.reported_device_code,
rp_qa_reported_device_codes.reported_dev_clarification,
rp_qa_reported_device_codes.reported_dev_code_desc,
rp_qa_patient_codes.patient_code,
rp_qa_patient_codes.patient_code_clarif,
rp_qa_patient_codes.patient_code_severity,
rp_qa_patient_codes.description
FROM chsuser.a_compl_summary,
chsuser.rp_qa_patient_codes,
chsuser.rp_qa_reported_device_codes
WHERE ( (a_compl_summary.incident_number =
rp_qa_patient_codes.incident_number
AND (a_compl_summary.case_number = rp_qa_patient_codes.case_number)
AND (a_compl_summary.part_sequence = rp_qa_patient_codes.part_sequence
AND (a_compl_summary.incident_number =
rp_qa_reported_device_codes.incident_number
AND (a_compl_summary.case_number =
rp_qa_reported_device_codes.case_number
AND (a_compl_summary.part_sequence =
rp_qa_reported_device_codes.part_sequence
AND (rp_qa_reported_device_codes.incident_number =
rp_qa_patient_codes.incident_number
AND (rp_qa_reported_device_codes.case_number =
rp_qa_patient_codes.case_number
AND (rp_qa_reported_device_codes.part_sequence =
rp_qa_patient_codes.part_sequence
AND (a_compl_summary.product_division = 'CP')
AND ( a_compl_summary.entry_date >= ?
AND a_compl_summary.entry_date <= ?
AND ( a_compl_summary.product_family LIKE ?
OR a_compl_summary.product_family LIKE ?
OR a_compl_summary.product_family LIKE ?
OR a_compl_summary.product_family LIKE ?
OR a_compl_summary.product_family LIKE ?
AND (a_compl_summary.region = ?)
AND ( a_compl_summary.NAME = ?
OR a_compl_summary.NAME = ?
OR a_compl_summary.NAME = ?
OR a_compl_summary.NAME = ?
OR a_compl_summary.NAME = ?
AND (a_compl_summary.complaint = ?)
AND ( rp_qa_reported_device_codes.reported_dev_clarification LIKE
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
AND (rp_qa_reported_device_codes.reported_dev_clarification NOT LIKE
))
Maybe you are looking for
-
My daughter has managed to disable her Ipad mini by entering the wrong pass code several times as she couldn't remember what she changed it too. How can I fix this?
-
StreamCorruptedException when deserializing from a DatagramPacket
Using jrockit 1.4.2_05 or jrockit 1.5.0_03 on Windows XP,I get some troubles when deserializing an object from a DatagramPacket received from a multicast socket. It seems that jrockit incorrectly read the object. Some fields are altered, and if the o
-
Hi, I have this abap/exec sql code to extract data from as400/db2. I am getting data by a "select" statement and i am trying to append the records with append statements. but, not works. EXEC SQL. CONNECT TO 'SATDBR' ENDEXEC. EXEC SQL. --->(H
-
Path file control indicating the installation file directory
Hello, I'm making a package on labview 6.1. Once this package is installed on a pc the software will use some txt files. On my code I specified the directory of these txt file but if the user want to change the install directory given by default, the
-
Does Developer2000 work with AS400/DB2
Hi Folks, Has anyone worked on Oracle Developer 2000 using an AS/400 DB2 as database server? Is it feasible using Oracle Open Client Adapter? Appreciate if you could detail the issues you faced during implementation. Thanks Ramesh