Use Logitech's (PS3 style) Controller for mouse functions

I would like to use Logitech's (PS3 style) Dual Action Gamepad Controller for general mouse functions. Any ideas how to go about doing this?

There is a program that I found that is availible for free called DarkwiinRemote. Wii Remotes use Bluetooth and IR to connect to a Wii and newer Macs have both of those ports. It is kind of a pointless function but it's fun to control your Remote from your Mac and vise versa.

Similar Messages

  • Is it possible to use an iPhone as a controller for iPad (for games).

    Is it possible to use an iPhone as a controller for iPad?
    And if so what apps are supported.
    And will gta 3, vice city, San Andreas and dead trigger 2 work with it.

    The only game I know of that does this is "The Incident" - it's not a built-in iOS feature. The developers of that game specifically have allowed it.
    http://bigbucketsoftware.com/theincident/

  • How to use Fuzzy Logic Controller for transfer function in labview control and simulation loop?

    I am facing problem with fuzzy PD logic controller for transfer function in control and simulation loop.
    Plz Help me in this regard...................
    i have attache snapshot of my program
    Attachments:
    fuzzy in simulation loop.JPG ‏52 KB

    Hi Sankhadip,
    Sorry for the late response. I was looking at your code and
    I noticed that the graph scale does not start from zero. That might be the
    reason why you don't see the transient in the simulation. To change the scales
    simply double click on the lower limit and set it to zero. If this is not the
    expected results, can you please post the expected results, so we can see what are the
    differences between the results . Also, you might be using different
    solvers, and that gives different results as well.    
    Thanks and have a great day.
    Esmail Hamdan | Applications Engineering | National
    Instruments

  • Using Logitech (PS3 style) Dual Action Gamepad Controller as Mouse in FCP

    I would like to use Logitech's (PS3 style) Dual Action Gamepad Controller for mouse functions in FCP. Any ideas how to go about doing this?

    Try pressing the PS button for 2-3 seconds with Bluetooth on and discoverable before you plug into your MB. When the lights flash, plug it in and press the PS button for 2-3 seconds again. You may need to open System Prefs and click the settings cog below your listed devices in the Bluetooth pane. Once the controller is recognized, click the settings cog and click "add as favorite" & "update services". It should auto pair now whenever you press the PS button when BT is on. I play Borderlands 2 on my 2011 MBP with a PS3 controller. It was a huge chore to find the solution but, heres what I did. Purchase Joystick Mapper, open it, have the controller on. In the menu bar under File, click load examples. Theres a bunch of pre-defined settings for both the PS and XB360 controllers. Some for using as a mouse, First Person Shooter, games that use keys & mouse and so on. I pulled the PS3 FPS example and cloned the example as to not delete the original. Labeled it Borderlands 2 and turned down the sensitivity on the Axis'. They were way to touchy for me. Its not perfect for me yet BUT, it works completely. The Use or E button is actually the Left D-Pad but, its not that odd. It also will give you a good idea on how to do it for other games. Just make a profile for each one. Clone that and then tweak it to your liking. Good luck!

  • How do you go to marker  when there is a wait for mouse click between the markers?

    I cant seem to get by the wait for mouse click, when using                          go to (marker)
    I have a game that I have 2 push buttons one is
    on mouseUp me
      go to frame 9
    end
    on mouseUp me
       go to frame  29
    end
    There is a wait to click in between these 2  frames and when I click on the  2nd button to go to frame 29  it stops at the wait to click?
    I have tried  all these below and cant get past the click to wait?????
    go
    go to frame
    go to marker
    _movie.go
    _movie.marker
    _nextMarker=

    Think this issue is resolved but to ensure the full answer is available, here it is.
    First, it's a bad idea to use the Tempo channel at all. You can use a script to do anything that you can do there. I have Lingo alternates to the Tempo channel at:
    http://www.deansdirectortutorials.com/Lingo/tempoLingo.htm
    (think I need to update this page though)
    So - DO NOT USE the Tempo Channel setting - Wait for Mouse Click or Key Press.
    The above setting creates a type of pause that interferes with other interactivity.
    Instead - use a 'Hold on Frame' behavior (from the Library Palette - Navigation category) or it could be written as:
    on exitFrame
    go the frame
    end
    Once you have the above behaviour in you desired frame, you can attach a sprite behaviour to your buttons / links. A good one to use is the ‘Jump to Marker Button’ behaviour in the Controls category of the Library Palette. You can attach this behavior to different sprites and just change the marker setting of the behavior, removing the need to have individual hard-coded scripts for each button.
    Next – DO NOT link to frame numbers. Always link to a marker. You may insert or remove frames. This would cause your incorrect links since the frame number would no longer the right point.
    Next – the following all do the same thing:
    go to frame “markername”
    go to “markername”
    go “markername”
    So, you can leave out ‘frame’ or even ‘to’ as they are not needed. I still use ‘go to’ as it feels more natural to me (just history).
    or you could use:
    _movie.go("dean")
    Don’t use
    go to marker “markername”
    I think that did work at some point but not anymore.
    marker can be used as follows:
    go marker (-1)
    Where -1 is the amount of markers back (could be forward as well).
    Well, that gives the detailed answer to your question.
    Dean

  • Is there a reason no one is using the Prologix GPIB-ETHERNET controller?

    I am trying to control several Agilent HP-6033A power supplies and an HP-6681A power supply.  I have a Prologix GPIB-Ethernet controller on each.  I have done a search on "prologix ethernet" with zero results, however, there are a number of Prologix USB-Ethernet references.  Is there a reason no one is using the Prologix GPIB-ETHERNET controller?  This is a project I have inherited and I'm trying to troubleshoot some intermittent problems.
    Thanks!

    My group uses the Prologix GPIB-ETHERNET controller for controlling two Keithley devices in a Visual Studio 2008 .NET application. To achieve a sample rate under 200ms, we have to place one GPIB-ETHERNET on each Keithley device.  The device was very easy to program using TCP/IP calls and required no drivers from Prologix.
    On our latest application, we switched to the NI ENET-1000 because the Prologix device doesn't have a certificate like the NI ENET-1000 has. Unlike the Prologix, I must install the NI 422 driver and MAX. I can easily control two Keithley devices with one ENET-1000. Next week, I intend to see if I can control 4-5 Keithleys simultaneously in under 100ms.
    No matter what the IP address of the computer is versus the Prologix, the Prologix net configuration utility can find the device.  If the NI device is not in the same subnet, the computer cannot find it. 

  • Using logitech mouse on Macbook Pro

    Why can't I use logitech mouse on my macro pro? My macbook is running OS X Yosemite version 10.10.2 system. It is a 2012 one.

    Logitech have their own Control Center panes and/or a LCC Connection Utility app.  They are located either in System Preferences and/or inside the Utility folder. You will need to go into it to either re-do your settings and/or update its drivers if optional.
    You are lacking details about your mouse.  Suggest you contact Logitech tech support for further help if the suggestions already posted do not work for you.

  • Questions about using Styles Window for formatting a book in Apple Works.

    Help says "You can create your own styles in any document type." Not clear on how to do that.
    I wish to have one Style or group of Styles associated with one document of say 500 pages for a book. Each chapter Heading. as a single column layout, is separated by Section Breaks from previous and following text in 2 column layout.
    Question 1. How do I make Styles window settings (Edit/Done) specific for this entire document? Can I edit settings in Styles window and have them remain specific and locked to this particular document? Or are the Styles window settings constant across all documents?
    Question 2. (If Styles window settings are not specific and locked to this document) Do I need to make a NEW Style for each purpose within the document, as in Book Heading, Book Subheading, Book Body, Book special paragraph style, and etc.
    Question 3. When importing multiple sections of the work (by copy and paste) from other AW documents how can I have the imported text follow the book’s Style settings (and vice versa how to keep tab settings that are specific in some areas). Sometimes the imported work refuses to conform to the Book document’s style say line spacing for instance.
    Thank you
    Hilary Fish
    iBook G4 Mac OS X (10.4.8) AppleWorks 6.2.9

    Hi Hilary,
    I haven't used styles enough to give definitive answers to your questions, but I'm sure others will join in and correct any errors in what follows.
    A "Style" is essentially a set of paragraph level format settings that can be collectively applied to a paragraph or contiguous set of paragraphs as a set, rather than having to apply each attribute individually. Once a style is applied to various parts of a document, changes made to the style specification will apply to every part of the document to which that style has been applied.
    AppleWorks also includes two other types of Styles—Outline styles (Diamond, Harvard and Legal), used to identify hierarchical levels of paragraphs, and Table styles, used to format tables.
    Question 1: From the Help article "Using Styles":
    You can copy the collection of all the styles available in a document and make them available in another document. This is called exporting and importing a stylesheet.
    I read this as saying that styles you create are specific to the document in which they are created, but may be exported to other documents. "Other documents" would includes documents saved as templates, which could be used to create the various sections of a book.
    Question 2:
    As the set of styles is specific to the document it is created in (or into which it is imported), you can probably leave "Book " off the names of the styles (but may decide that leaving it on makes it easier to know what the styles are for). You will need to use an existing style or create a new one for each purpose within the document.
    Question 3:
    Copy copies the text AND formatting of the selected material.
    Paste pastes the text AND formatting of the selected material.
    Paste also inserts the pasted material into the target document at the insertion point. All of the pasted material goes into the same Section. If the pasted material includes a section break, then a new section will be created in the target document.
    If you export the set of styles from the master document and apply them to the parts of the source document before transferring the material to the master document, I suspect the formatting will be carried over.
    Another possibility is to leave the source document with no formatting at all beyond paragraph breaks, and to apply the formatting (styles) after transferring the text.
    Regards,
    Barry

  • How can I use my UC-33e as a drawbar controller for EVB3 in Mainstage?

    Hi,
    I am a complete noob when it comes to Mainstage. I've been using Logic for close to a year now with relatively few problems, but I am stumped when it comes to MS, for a couple of issues anyway. Here's one:
    I use various software B3 emulations - EVB3, B4 and VB3. I use my Evolution UC-33e controller as the drawbars controller. I use this in Logic with no problem, took me a minute or two to figure how to set up the EVB3 but it all works great - in Logic.
    I was thinking that MS was basically Logic minus the recording and sequencing, but as for now that doesn't appear to be the case. I have my keyboard and the UC-33e both transmitting on Ch 1. When I call up the Jazz Organ patch (for example), I can still go into EVB3 and set it to recognize the NI controller set (which is what the UC-33e transmits), but when I move the drawbar controllers I will get patch changes, parameter changes, but nothing relating to the EVB3. I can go into layout mode and get the Drive control to work, as 'Distort Drive' is one of the parameters that are available on the layout for this patch, so I know it can work.
    Do I have to create a new layout that contains the controllers on UC-33e? I want to at least be able to use the drawbars, Leslie fast/slow, volume & drive.
    I'm also curious to know why this setup works with no problems in Logic but not in MS. I have 3 weeks to get MS set up correctly, but if I'm still having trouble in a week I'll just use Logic - I know that will work!
    -Doug

    I think I'll make it easy on myself. No MS, just NI. I'm using two keyboards. I'll use the Pro-53 for synth sounds, and have it set to see my little Arturia controller. I'll have Akoustik Piano and the B4 running on my 76-key controller, and since the B4 is set to run on Ch 1, I'll set AP to run on Ch 16 and just toggle back and forth using the MIDI buttons on my controller. If I need a Wurly or Clav I can boot up Elektrik Piano and set it to a different channel. Of course I can still use my UC-33e for the B4 as the drawbar controller as well.
    It's not elegant and I won't get to use channel strips or effects but it is way easy to set up, it gives me the sounds I need for classic rock, and most importantly, it works

  • Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it. 
    Alex D
    Applications Engineer
    National Instruments

  • I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
    http://www.logitech.com/en-us/support/gamepad-f310?crid=411
    I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

  • I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature.  It now only allows me three options and the style I have been using for the last year is not

    I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature.  It now only allows me three options and the style I have been using for the last year is not there.  How do I add additional options and get my preferred signature style back?

    Hi Amanda ,
    Which version of Acrobat are you using?
    Which signature style are you talking about?
    You can go ahead and try uninstalling and reinstalling it and see if that works for you .
    Use the cleaner tool to uninstall it .Here is the link.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
    You can refer to the following link to re install it .
    https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards
    Sukrit Dhingra

  • Best Practices for Using Service Controller for Entity Framework Database

    I'm running into an issue in my first time creating a Web Service with a .NET backend with Azure. I designed a database in Entity Framework and had it create the models, but I couldn't create a controller for the table unless I made the model inherit from
    EntityData. Here's the catch, the Database Model has int Id, but EntityData has string Id, so, of course, I'm getting errors. What is best practice for what I'm trying to do?
    Michael DiLeo

    hi Michael,
    Thanks for you posting!
    Sorry for I am not totally understanding your issue. Maybe two points need your confirm:
    1. I confuse with the "Service controller"? IS your meaning MVC controller? Or ServiceController(http://www.codeproject.com/Articles/31688/Using-the-ServiceController-in-C-to-stop-and-start
    2.whether  The type of ID in the model is match to the database ? In other words, Is the type of IDin .edmx matched to the database?
    By the way, it seems that this issue is more related to EF. You could post this issue on EF discussion for better support.
    Thanks & Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to specify different horizontal restore & collapse icon for af|panelSplitter using Skinning based on Style class or position?

    Hello,
    I am trying to provide different horizontal restore & collapse icon for af|panelSplitter using Skinning based on Style class or position. I have 2 af:panelSplitter with orientation="horizontal" - One with positionedFromEnd="true" one with positionedFromEnd="false". I want to specify the horizontal collapse and restore icon using Skinning. I want specify different icons based on positionedFromEnd. When I specify icons they are appearing for both splitters. I gave 2 different styleClass to these splitter but it is not taking them in account,
    JSPX Page -
    <af:panelSplitter orientation="horizontal" splitterPosition="196" positionedFromEnd="false" id="pnlSplitterLeft" collapsed="false" styleClass="panelSplitterLeftClass">
      <f:facet name="first">
      <!-- Content of First Facets -->
      </f:facet>
      <f:facet name="second">
      <af:panelSplitter orientation="horizontal" splitterPosition="196" positionedFromEnd="true" id="pnlSplitterRight" collapsed="false" styleClass="panelSplitterRighClass">
      <f:facet name="first">
      <!-- Content of First Facets -->
      </f:facet>
      <f:facet name="second">
      <!-- Content of First Facets -->
      </f:facet>
      </af:panelSplitter>
      </f:facet>
    </af:panelSplitter>
    CSS Skinn
    af|panelSplitter::horizontal-restore-icon {
        width: 10px;
        height: 55px ;
        content : url("/skins/AppSkin/Left_Open.gif");
    af|panelSplitter::horizontal-collapse-icon {
        width: 10px;
        height: 55px ;
        content : url("/skins/AppSkin/Left_Close.gif");
    af|panelSplitter.panelSplitterLeftClass::horizontal-restore-icon {
        width: 10px;
        height: 55px ;
        content : url("/skins/AppSkin/Left_Open.gif");
    af|panelSplitter.panelSplitterLeftClass::horizontal-collapse-icon {
        width: 10px;
        height: 55px ;
        content : url("/skins/AppSkin/Left_Close.gif");
    af|panelSplitter.panelSplitterRighClass::horizontal-restore-icon {
        width: 10px;
        height: 55px ;
        content : url("/skins/AppSkin/Right_Open.gif");
    af|panelSplitter.panelSplitterRighClass::horizontal-collapse-icon {
        width: 10px;
        height: 55px ;
        content : url("/skins/AppSkin/Right_Close.gif");
    It is always showing Left_Open.gif and Left_Close.gif for both splitters. But I want different image.
    How to specify different horizontal restore & collapse icon for af|panelSplitter using Skinning based on Style class or position?
    - Sujay

    CSS attribute selectors are what you are talking about, but binding the selector with EL is a more-common approach. Using selectors like this require you to ensure browser support.
    af|panelSplitter.panelSplitterRighClass::horizontal-collapse-icon [positionedFromEnd=true]

  • Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can  use and it refuses to respond for a period of time

    Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can  use and it refuses to respond for a period of time

    Hi 
    Yes you can delete the expired certificate which are showing  as it is not functional anymore and they remain as stale entries 
    You can use  below command
    Remove-ExchangeCertificate -Thumbprint "specify the value "
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Maybe you are looking for