Use of I_CALLBACK_USER_COMMAND in ALV grid display
Hi experts,
When i am using the parameter I_CALLBACK_USER_COMMAND in grid display and when i click on BACK button, then the Function code for BACK button is not captured i.e. it does not go in the routine which i have written. But this is not the case with SAVE button. When i click on save button, then it goes in the routine ( i have put a breakpoint in the routine) and also the value of Function code for SAVE button is fetched. Then why is it not working for BACK or CANCEL button??
Thanks in advance
Actually my requirement is as follows.
I have develpoed a screen program in which i have a created a button & on the click of this button i call the reuse alv grid display FM which displays in the alv grid format. For this I have used an internal table whose first field is checkbox.( While creating the field catalog itab to be passed to reuse alv grid display i mark the checkbox field as 'X' for the first field.) Now when i display the alv, i need to select certain records. For this i tick mark the necessary records. But then when i click on the back button and come to the previous screen, i am not able to capture these selected records. How do i proceed
Similar Messages
-
Traffic Signals in ALV Without using oops only for normal Grid Display.
Hi Experts ,
I need to add traffic signals into my normal ALV Grid program without using oops concepts.
Please any one send me full code or provide me one program code without using oops concept for normal ALV Grid .
I searched in many forums but i found most of the programs wriiten using oops concept with ALV's but here my requirement without using oops concept and only normal reuse_alv_grid_display.
Thanks in Advance.
Venky.You can check the below sample code.Traffic light is implemented in it.
REPORT ztest NO STANDARD PAGE HEADING
LINE-SIZE 255 MESSAGE-ID zlqm.
TYPE-POOLS : slis,icon.
TABLES :qals,qave.
INCLUDE : zlqmr002_top, "Global Data Declaration
zlqmr002_selection_screen, "Selection Screen Inputs
zlqmr002_subroutine. "Subroutines
INITIALIZATION
INITIALIZATION.
PERFORM variant_init.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
Check for Variant existance
PERFORM pai_of_selection_screen.
*Validation for Material
AT SELECTION-SCREEN ON s_matnr.
IF NOT s_matnr IS INITIAL.
SELECT SINGLE matnr
INTO g_matnr
FROM mara
WHERE matnr IN s_matnr.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_MATNR'.
MESSAGE e000 WITH text-003.
ENDIF.
ENDIF.
*Validation for Plant
AT SELECTION-SCREEN ON s_werk.
IF NOT s_werk IS INITIAL.
SELECT SINGLE werks
INTO g_werk
FROM t001w
WHERE werks IN s_werk.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_WERK'.
MESSAGE e000 WITH text-004.
ENDIF.
ENDIF.
*Validation for Inspection Type
AT SELECTION-SCREEN ON s_art.
IF NOT s_art IS INITIAL.
SELECT SINGLE art
INTO g_art
FROM tq30
WHERE art IN s_art.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_ART'.
MESSAGE e000 WITH text-005.
ENDIF.
ENDIF.
*Validation for Code group
AT SELECTION-SCREEN ON s_vcdgrp.
IF NOT s_vcdgrp IS INITIAL.
SELECT SINGLE codegruppe
INTO g_vcdgrp
FROM qpgr
WHERE codegruppe IN s_vcdgrp.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_VCDGRP'.
MESSAGE e000 WITH text-006.
ENDIF.
ENDIF.
*Validation for Code
AT SELECTION-SCREEN ON s_vcode.
IF NOT s_vcode IS INITIAL.
SELECT SINGLE code
INTO g_vcode
FROM qpcd
WHERE code IN s_vcode.
IF sy-subrc <> 0.
SET CURSOR FIELD 'S_VCODE'.
MESSAGE e000 WITH text-007.
ENDIF.
ENDIF.
Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcdgrp-low.
PERFORM get_codegroup.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcdgrp-high.
PERFORM get_codegroup.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcode-low.
PERFORM get_code.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vcode-high.
PERFORM get_code.
START-OF-SELECTION.
START-OF-SELECTION.
**Selecting data form Database tables
PERFORM select_data TABLES i_out i_out1.
END-OF-SELECTION
END-OF-SELECTION.
**Generate ALV
PERFORM generate_alv.
DATA TYPES
TYPES : BEGIN OF t_qals,
matnr TYPE qals-matnr, "Material
werk TYPE qals-werk, "Plant
mengeneinh TYPE qals-mengeneinh, "UOM
lmenge01 TYPE qals-lmenge01, "Unrestricted qty
lmenge02 TYPE qals-lmenge02, "Scrap qty
lmenge03 TYPE qals-lmenge03, "Sample qty
lmenge04 TYPE qals-lmenge04, "Blocked qty
lmenge05 TYPE qals-lmenge05, "Retain qty
lmenge06 TYPE qals-lmenge06, "Othermat qty
lmenge07 TYPE qals-lmenge07, "RTV qty
lmenge08 TYPE qals-lmenge08, "Exp.scrap qty
prueflos TYPE qals-prueflos, "Inspection lot
art TYPE qals-art, "Inspection type
charg TYPE qals-charg, "Batch
vcode TYPE qave-vcode, "Usage decision
vdatum TYPE qave-vdatum, "Date
qmnum TYPE qmel-qmnum, "Notification
END OF t_qals.
TYPES : BEGIN OF t_out,
icon TYPE icon-id, "Status
matnr TYPE qals-matnr, "Material
werk TYPE qals-werk, "Plant
mengeneinh TYPE qals-mengeneinh, "UOM
vcode TYPE qave-vcode, "Usage decision
mncod(30) TYPE c, "Disposition
lmenge01 TYPE qals-lmenge01, "Unrestricted qty
lmenge02 TYPE qals-lmenge02, "Scrap qty
lmenge03 TYPE qals-lmenge03, "Sample qty
lmenge04 TYPE qals-lmenge04, "Blocked qty
lmenge05 TYPE qals-lmenge05, "Retain qty
lmenge06 TYPE qals-lmenge06, "Othermat qty
lmenge07 TYPE qals-lmenge07, "RTV qty
lmenge08 TYPE qals-lmenge08, "Exp.scrap qty
prueflos TYPE qals-prueflos, "Inspection lot
art TYPE qals-art, "Inspection type
qmnum TYPE qmel-qmnum, "Notification
vdatum TYPE qave-vdatum, "Date
charg TYPE qals-charg, "Batch
END OF t_out.
TYPES : BEGIN OF t_qmsm,
qmnum TYPE qmsm-qmnum,
manum TYPE qmsm-manum,
mncod TYPE qmsm-mncod,
END OF t_qmsm.
TYPES: BEGIN OF t_disp,
qmnum TYPE qmsm-qmnum,
mncod(30) TYPE c,
END OF t_disp.
TYPES: BEGIN OF t_codegrp,
katalogart TYPE qpgt-katalogart,
codegruppe TYPE qpgt-codegruppe,
kurztext TYPE qpgt-kurztext,
END OF t_codegrp.
TYPES: BEGIN OF t_code,
katalogart TYPE qpct-katalogart,
codegruppe TYPE qpct-codegruppe,
code TYPE qpct-code,
version TYPE qpct-version,
kurztext TYPE qpct-kurztext,
END OF t_code.
INTERNAL TABLES
DATA: i_qals TYPE TABLE OF t_qals,
wa_qals LIKE LINE OF i_qals,
i_qmsm TYPE TABLE OF t_qmsm,
wa_qmsm TYPE t_qmsm,
i_disp TYPE TABLE OF t_disp,
wa_disp LIKE LINE OF i_disp,
i_out TYPE TABLE OF t_out,
wa_out TYPE t_out,
i_out1 TYPE TABLE OF t_out,
wa_out1 TYPE t_out,
i_codegrp TYPE TABLE OF t_codegrp,
i_code TYPE TABLE OF t_code,
i_qmsm_tmp TYPE TABLE OF t_qmsm.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_layout TYPE slis_layout_alv,
g_repid TYPE sy-repid,
wa_fieldcat TYPE slis_fieldcat_alv.
Global Variables
DATA : g_matnr TYPE matnr,
g_werk TYPE werks,
g_art TYPE qpart,
g_vcdgrp TYPE qvgruppe,
g_vcode TYPE qvcode,
g_red TYPE c,
g_yellow TYPE c,
g_table(6) TYPE c,
g_save(1) TYPE c,
g_exit(1) TYPE c,
g_report TYPE sy-repid,
g_var TYPE disvariant,
g_variant TYPE disvariant.
Constants
CONSTANTS: c_green TYPE icon-id VALUE '@08@',
c_yellow TYPE icon-id VALUE '@09@',
c_red TYPE icon-id VALUE '@0A@'.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR qals-matnr, "Material Number
s_werk FOR qals-werk, "Plant
s_art FOR qals-art, "Inspection Type
s_vcdgrp FOR qave-vcodegrp, "Usage Decision Code Group
s_vcode FOR qave-vcode, "Usage Decision Code
s_vdatum FOR qave-vdatum. "Usage Decision Code Date
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_all RADIOBUTTON GROUP g1 DEFAULT 'X',
p_excp RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-009.
"Variant Selection
PARAMETERS: p_vari TYPE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
*& Form select_data
Select Inspection Details
FORM select_data TABLES p_out STRUCTURE wa_out
p_out1 STRUCTURE wa_out.
DATA:l_mncod(30) TYPE c.
REFRESH : i_qals,i_qmsm,i_qmsm_tmp,i_disp,p_out.
SELECT qalsmatnr qalswerk qals~mengeneinh
qalslmenge01 qalslmenge02 qals~lmenge03
qalslmenge04 qalslmenge05 qals~lmenge06
qalslmenge07 qalslmenge08 qals~prueflos
qalsart qalscharg qave~vcode
qavevdatum qmelqmnum
INTO CORRESPONDING FIELDS OF TABLE i_qals
FROM qals
INNER JOIN qave
ON qalsprueflos = qaveprueflos
INNER JOIN qmel
ON qalsprueflos = qmelprueflos
WHERE qals~matnr IN s_matnr
AND qals~werk IN s_werk
AND qals~art IN s_art
AND qals~stat34 EQ 'X'
AND qave~vcodegrp IN s_vcdgrp
AND qave~vcode IN s_vcode
AND qave~vdatum IN s_vdatum.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-008.
ENDIF.
IF NOT i_qals IS INITIAL.
SELECT qmnum manum mncod INTO TABLE i_qmsm
FROM qmsm
FOR ALL ENTRIES IN i_qals
WHERE qmnum EQ i_qals-qmnum
AND mngrp LIKE 'Q_D%'
AND kzloesch NE 'X'.
ENDIF.
***Concatenation of Disposition Codes
IF NOT i_qmsm IS INITIAL.
i_qmsm_tmp = i_qmsm.
SORT i_qmsm_tmp BY qmnum mncod.
DELETE ADJACENT DUPLICATES FROM i_qmsm_tmp COMPARING qmnum mncod+0(2).
CLEAR wa_qmsm.
LOOP AT i_qmsm_tmp INTO wa_qmsm.
MOVE wa_qmsm-qmnum TO wa_disp-qmnum.
CONCATENATE l_mncod wa_qmsm-mncod+0(2) INTO l_mncod SEPARATED BY space.
AT END OF qmnum.
SHIFT l_mncod LEFT DELETING LEADING space.
MOVE l_mncod TO wa_disp-mncod.
APPEND wa_disp TO i_disp.
CLEAR:wa_disp,l_mncod.
ENDAT.
ENDLOOP.
ENDIF.
***Transfer of data to the output table
LOOP AT i_qals INTO wa_qals.
MOVE-CORRESPONDING wa_qals TO wa_out.
CLEAR wa_disp.
READ TABLE i_disp INTO wa_disp
WITH KEY qmnum = wa_qals-qmnum.
IF sy-subrc EQ 0.
MOVE wa_disp-mncod TO wa_out-mncod.
ENDIF.
PERFORM check_quantity USING wa_qals.
CLEAR wa_qmsm.
LOOP AT i_qmsm INTO wa_qmsm
WHERE qmnum EQ wa_qals-qmnum.
PERFORM check_group USING wa_qals
wa_qmsm.
CLEAR wa_qmsm.
ENDLOOP.
IF g_red NE 'X'.
CLEAR wa_qmsm.
LOOP AT i_qmsm INTO wa_qmsm WHERE qmnum = wa_qals-qmnum
AND mncod0(2) NE wa_qals-vcode0(2).
g_yellow = 'X'.
ENDLOOP.
ENDIF.
IF g_yellow EQ 'X'.
MOVE c_yellow TO wa_out-icon.
ELSEIF g_red EQ 'X'.
MOVE c_red TO wa_out-icon.
ELSE.
MOVE c_green TO wa_out-icon.
ENDIF.
APPEND wa_out TO p_out.
CLEAR:wa_qals,wa_out,g_red,g_yellow.
ENDLOOP.
***IF only exceptions are need to be displayed
IF p_excp EQ 'X'.
CLEAR wa_out.
LOOP AT p_out INTO wa_out WHERE icon EQ c_red.
APPEND wa_out TO p_out1.
ENDLOOP.
ENDIF.
ENDFORM. " select_data
*& Form populate_fieldcat
Populate the Fieldcat Table
FORM populate_fieldcat USING p_table TYPE c.
**status
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'ICON'.
wa_fieldcat-seltext_l = text-010.
wa_fieldcat-outputlen = 15.
wa_fieldcat-icon = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
**Material
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-seltext_l = text-011.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO i_fieldcat.
**Plant
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'WERK'.
wa_fieldcat-seltext_l = text-012.
wa_fieldcat-outputlen = 7.
APPEND wa_fieldcat TO i_fieldcat.
**Usage Decision
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'VCODE'.
wa_fieldcat-seltext_l = text-013.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO i_fieldcat.
**Dispositions
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'MNCOD'.
wa_fieldcat-seltext_l = text-014.
wa_fieldcat-outputlen = 18.
APPEND wa_fieldcat TO i_fieldcat.
**UOM
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'MENGENEINH'.
wa_fieldcat-seltext_l = text-015.
wa_fieldcat-outputlen = 18.
APPEND wa_fieldcat TO i_fieldcat.
**Unrestricted Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE01'.
wa_fieldcat-seltext_l = text-016.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Scrap Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE02'.
wa_fieldcat-seltext_l = text-017.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Sample Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE03'.
wa_fieldcat-seltext_l = text-018.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Blocked Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE04'.
wa_fieldcat-seltext_l = text-019.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Retain Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE05'.
wa_fieldcat-seltext_l = text-020.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Other Mat Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE06'.
wa_fieldcat-seltext_l = text-021.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**RTV Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE07'.
wa_fieldcat-seltext_l = text-022.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Exp. Scrap Quantity
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'LMENGE08'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-qfieldname = 'MENGENEINH'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Inspection Lot
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'PRUEFLOS'.
wa_fieldcat-seltext_l = text-024.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Inspection Type
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'ART'.
wa_fieldcat-seltext_l = text-025.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Notification
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'QMNUM'.
wa_fieldcat-seltext_l = text-026.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Date
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'VDATUM'.
wa_fieldcat-seltext_l = text-027.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
**Batch
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'CHARG'.
wa_fieldcat-seltext_l = text-028.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " populate_fieldcat
*& Form check_quantity
To Check the Quantity
FORM check_quantity USING p_qals TYPE t_qals.
IF wa_qals-lmenge01 GT 0.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'UI'
OR mncod CP 'SR'
OR mncod CP 'ND' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge02 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'SC'
OR mncod CP 'SR' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge04 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'RW'
OR mncod CP 'RD' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge05 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND mncod CP 'R1'.
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge06 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND mncod CP 'RD'.
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge07 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND mncod CP 'RV'.
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
IF wa_qals-lmenge08 GT 0 AND g_red NE 'X'.
LOOP AT i_disp TRANSPORTING NO FIELDS
WHERE qmnum EQ wa_qals-qmnum
AND ( mncod CP 'SC'
OR mncod CP 'SE' ).
ENDLOOP.
IF sy-subrc NE 0.
g_red = 'X'.
ENDIF.
ENDIF.
ENDFORM. " check_quantity
*& Form check_group
To check the Disposition Code
FORM check_group USING p_qals TYPE t_qals
p_qmsm TYPE t_qmsm.
IF p_qmsm-mncod+0(2) EQ 'UI' AND
NOT p_qals-lmenge01 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'RW' AND
NOT p_qals-lmenge04 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'SC' AND
NOT p_qals-lmenge02 GT 0 AND
NOT p_qals-lmenge08 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'SE' AND
NOT p_qals-lmenge08 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'RV' AND
NOT p_qals-lmenge07 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'SR' AND
NOT p_qals-lmenge01 GT 0 AND
NOT p_qals-lmenge02 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'ND' AND
NOT p_qals-lmenge01 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'R1' AND
NOT p_qals-lmenge05 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
IF p_qmsm-mncod+0(2) EQ 'RD' AND
NOT p_qals-lmenge04 GT 0 AND
NOT p_qals-lmenge06 GT 0.
g_red = 'X'.
EXIT.
ENDIF.
ENDFORM. " check_group
*& Form call_alv
Call ALV Grid Display
FORM call_alv TABLES p_out STRUCTURE wa_out.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
TABLES
t_outtab = p_out
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_alv
*& Form generate_alv
Build ALV
FORM generate_alv .
IF NOT i_out IS INITIAL OR
NOT i_out1 IS INITIAL.
g_repid = sy-repid.
IF p_excp EQ 'X'.
MOVE 'I_OUT1' TO g_table.
ELSEIF p_all EQ 'X'.
MOVE 'I_OUT' TO g_table.
ENDIF.
PERFORM populate_fieldcat USING g_table.
i_layout-zebra = 'X'.
i_layout-colwidth_optimize = 'X'.
IF p_excp = 'X'.
PERFORM call_alv TABLES i_out1.
ELSEIF p_all = 'X'.
PERFORM call_alv TABLES i_out.
ENDIF.
ENDIF.
ENDFORM. " generate_alv
*& Form PF_STATUS_SET
Setting PF Status
FORM pf_status_set USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'STATUS1' .
ENDFORM. "PF_STATUS_SET
*& Form USER_COMMAND
User Command Processing
FORM user_command USING r_ucomm TYPE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN 'UDG'.
IF p_all EQ 'X'.
CLEAR wa_out.
READ TABLE i_out INTO wa_out INDEX rs_selfield-tabindex.
SET PARAMETER ID 'QLS' FIELD wa_out-prueflos.
ELSEIF p_excp EQ 'X'.
CLEAR wa_out1.
READ TABLE i_out1 INTO wa_out1 INDEX rs_selfield-tabindex.
SET PARAMETER ID 'QLS' FIELD wa_out1-prueflos.
ENDIF.
CALL TRANSACTION 'QA13' AND SKIP FIRST SCREEN.
WHEN 'QNF'.
IF p_all EQ 'X'.
CLEAR wa_out.
READ TABLE i_out INTO wa_out INDEX rs_selfield-tabindex.
SET PARAMETER ID 'IQM' FIELD wa_out-qmnum.
ELSEIF p_excp EQ 'X'.
CLEAR wa_out1.
READ TABLE i_out1 INTO wa_out1 INDEX rs_selfield-tabindex.
SET PARAMETER ID 'IQM' FIELD wa_out1-qmnum.
ENDIF.
CALL TRANSACTION 'QM03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM. "USER_COMMAND
*& Form variant_init
Initialize variant
FORM variant_init .
Set Options: save variants userspecific or general
g_save = 'A'.
g_report = sy-repid.
g_var-report = g_report.
Get default variant
g_variant = g_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = g_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = g_variant-variant.
ENDIF.
ENDFORM. " variant_init
*& Form f4_for_variant
F4 help for variant
FORM f4_for_variant .
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_var
i_save = g_save
IMPORTING
e_exit = g_exit
es_variant = g_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = g_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_for_variant
*& Form pai_of_selection_screen
Check existence of Variant
FORM pai_of_selection_screen .
IF NOT p_vari IS INITIAL.
MOVE g_var TO g_variant.
MOVE p_vari TO g_variant-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = g_save
CHANGING
cs_variant = g_variant.
g_var = g_variant.
ELSE.
PERFORM variant_init.
ENDIF.
ENDFORM. " pai_of_selection_screen
*& Form get_codegroup
Get F4 help for Code Group
FORM get_codegroup .
DATA: i_return TYPE TABLE OF ddshretval.
SELECT katalogart codegruppe kurztext FROM qpgt
INTO TABLE i_codegrp
WHERE katalogart EQ '3'
AND sprache EQ sy-langu.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'CODEGRUPPE'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_VCDGRP'
value_org = 'S'
TABLES
value_tab = i_codegrp[]
return_tab = i_return[]
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " get_codegroup
*& Form get_code
Get F4 help for Code
FORM get_code .
DATA: l_field TYPE rsscr-name VALUE 'S_VCDGRP',
l_field_kind TYPE rsscr-kind VALUE 'S',
li_par_values TYPE TABLE OF rsparams,
la_par_values TYPE rsparams,
r_cdgrp TYPE RANGE OF qpct-codegruppe,
la_cdgrp LIKE LINE OF r_cdgrp.
**Get the values entered in the selection screen
PERFORM f4_get_related_values IN PROGRAM rsdbspf4
TABLES li_par_values
USING l_field l_field_kind.
IF NOT li_par_values IS INITIAL.
CLEAR:la_cdgrp,la_par_values.
LOOP AT li_par_values INTO la_par_values.
MOVE-CORRESPONDING la_par_values TO la_cdgrp.
IF la_cdgrp-option IS INITIAL.
MOVE 'EQ' TO la_cdgrp-option.
ENDIF.
APPEND la_cdgrp TO r_cdgrp.
CLEAR la_cdgrp.
ENDLOOP.
ENDIF.
SELECT katalogart codegruppe
code version
kurztext FROM qpct
INTO TABLE i_code
WHERE katalogart EQ '3'
AND codegruppe IN r_cdgrp
AND sprache EQ sy-langu.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'CODE'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_VCODE'
value_org = 'S'
TABLES
value_tab = i_code[]
return_tab =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " get_code -
Error in field catalog in ALV grid display using classes at do_sum = "X'.
Hi,
I'm using classes in ALV Grid display.
the code for the field catalog is going to dump because of the statement in the field catalog for field 'netwr',do_sum = 'X'.
that do_sum = 'X' is not working and going to dump when executed.with out that do_sum it is working fine. the error in dump analysys is showing sap standard incude LSLVCF01.
assign component
<ls_fieldcat>-fieldname of structure rt_data to <g_field>.
if sy-subrc ne 0.
message x000(0k).
endif.
sy-subrc is 4 when the program is being executed.
CODE:
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'VBELN1'.
ls_fcat-ref_field = 'VBELN'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Invoice No'.
ls_fcat-seltext = 'Invoice No'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'BUDAT'.
ls_fcat-ref_table = 'BKPF'.
ls_fcat-coltext = 'Invoice Date'.
ls_fcat-seltext = 'Invoice Date'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM.
can u please look in the code and rectify the error,
would appeciate ur response.
regards,
veera.Hi,
try this..
ls_fcat-fieldname = 'NETWR'.
ls_fcat-ref_field = 'NETWR'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-datatype = 'CURR'.
ls_fcat-do_sum = 'X'.
<b>ls_fcat-cfieldname = 'WAERS'.</b>
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
Regards
vijay -
Regarding output using alv grid display
Hi experts,
i have a program
FS_TAB1-A = P_T1.
IF P_T1 = 0.
TEMP1 = 1.
DO TEMP1 TIMES.
FS_TAB1-A = P_T1 * DUMMY1.
APPEND FS_TAB1 TO T_TAB1.
DUMMY1 = DUMMY1 + 1.
ENDDO.
now i have to diplay the p_t1*dummy1 using alv grid display like it goes into thew loop for ten times then i have to show it 10 times like
10 1 102 103 104 111 112 like that can u help mehi,
you have to get the result of the multiplication at each row and then concatenate the result and the factor to show the final result in multiples value and multiplication factor... -
Want to display more than 300 charcters in a column using ALV grid display
Hi Guru's,
I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
Thanks,
Radha.Hi Paurl,
Define a work area say
wa_layout type slis_layout_alv.
then fill this work area as
wa_layout-zebra = X
wa_layout-colwidth_optimize = X.
wa_layout-max_linesize = 300.
Then in FM 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
etc.
you provided this for the field which is displayed in alv grid will have more than 128 characters.
from this code i want,how it refers to particular field.
when i mentioned field catalog-OUTPUTLEN = '300'.
it is not displayed the field morethan 128 characters.
it only displays 128 characters.
please provide me clear and breif information with suitable code.
i am trying what your sending but it is not displayed more than 128 characters.
if you don't mind please spend for me some time for this and
give me clear and breif information with suitable code.
Thanks & Regards,
Radhakrishna. -
How to display field of 250 character length using ALV Grid display
Hello Experts,
Currently I'm using 4.6 version.
I got to insert a new field of length 250 characters into an existing ALV grid display.
I passed a value of length 250 chars into the field and assigned it to the itab passing to the fn module
'REUSE_ALV_GRID_DISPLAY'.
But in the ALV display I am able to view only 132 chars only. I increased the line-size of the report also accordingly. But I'm unable to view all the 250 chars.
Kindly help me out in fixing this issue.you just can't do that
I suggest that you put the first characters in cell and allow user to double-click on cell in order to view the full value in a popup window -
ALV GRID DISPLAY USING FACTORY METHODS
Hi all
I am using factory methods for my alv grid display.
I have a list of functionalities, for which i am not able to find a correct method..
1) Header of alv(with all the values of the selection-screen)
2)How to give text to a subtotal(ed) column, i.e. if i subtotal a qty field against a sorted field, i want to display ==> Nett Wt. = 123.00 (for first header entry) and so on for each header entry.
3)how to remove the zeroes from a quantity field?
4) Displaying the cells as blanks where data is 0( for quantity fields if i have a cell with zero value, it should be blank.)
5) double click on a cell to open a transaction with the cell's value.
Any help on this would be appreciated.
Points will be rewarded for sure...
Thanks & Regards
Ravish GargHello Ravish
Regarding the display of zero values as empty cells have a look at my <i>modified </i>sample report <b>ZUS_SDN_CL_SALV_TABLE_INTERACT</b>.
*& Report ZUS_SDN_CL_SALV_TABLE_INTERACT
REPORT zus_sdn_cl_salv_table_interact.
TYPE-POOLS: abap.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1.
DATA:
go_table TYPE REF TO cl_salv_table,
go_events TYPE REF TO cl_salv_events_table.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT
if_salv_events_actions_table~double_click
OF cl_salv_events_table
IMPORTING
row
column.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
lo_table TYPE REF TO cl_salv_table,
lt_orders TYPE STANDARD TABLE OF bapiorders,
ls_knb1 TYPE knb1.
READ TABLE gt_knb1 INTO ls_knb1 INDEX row.
IF ( syst-subrc = 0 ).
CALL FUNCTION 'BAPI_SALESORDER_GETLIST'
EXPORTING
customer_number = ls_knb1-kunnr
sales_organization = '1000'
* MATERIAL =
* DOCUMENT_DATE =
* DOCUMENT_DATE_TO =
* PURCHASE_ORDER =
* TRANSACTION_GROUP = 0
* PURCHASE_ORDER_NUMBER =
* IMPORTING
* RETURN =
TABLES
sales_orders = lt_orders.
* Create ALV grid instance
TRY.
CALL METHOD cl_salv_table=>factory
* EXPORTING
* LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
* R_CONTAINER =
* CONTAINER_NAME =
IMPORTING
r_salv_table = lo_table
CHANGING
t_table = lt_orders.
CATCH cx_salv_msg .
ENDTRY.
lo_table->display( ).
** SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
** SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
** CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = '1000'.
* Create ALV grid instance
TRY.
CALL METHOD cl_salv_table=>factory
* EXPORTING
* LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
* R_CONTAINER =
* CONTAINER_NAME =
IMPORTING
r_salv_table = go_table
CHANGING
t_table = gt_knb1.
CATCH cx_salv_msg .
ENDTRY.
* Create event instance
go_events = go_table->get_event( ).
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_double_click FOR go_events.
PERFORM modify_columns.
go_table->display( ).
END-OF-SELECTION.
*& Form MODIFY_COLUMNS
* text
* --> p1 text
* <-- p2 text
FORM modify_columns .
* define local data
DATA:
lt_dfies TYPE ddfields,
ls_dfies TYPE dfies,
lo_typedescr TYPE REF TO cl_abap_typedescr,
lo_strucdescr TYPE REF TO cl_abap_structdescr,
lo_tabledescr TYPE REF TO cl_abap_tabledescr,
lo_columns TYPE REF TO cl_salv_columns_table,
lo_column TYPE REF TO cl_salv_column.
lo_columns = go_table->get_columns( ).
lo_typedescr = cl_abap_typedescr=>describe_by_data( gt_knb1 ).
lo_tabledescr ?= lo_typedescr.
lo_strucdescr ?= lo_tabledescr->get_table_line_type( ).
lt_dfies = lo_strucdescr->get_ddic_field_list( ).
LOOP AT lt_dfies INTO ls_dfies.
lo_column = lo_columns->get_column( ls_dfies-fieldname ).
IF ( ls_dfies-keyflag = abap_true ).
CONTINUE.
ELSEIF ( ls_dfies-fieldname = 'WEBTR' ). " Bill of ex. limit
lo_column->set_zero( if_salv_c_bool_sap=>true ). " display zero
lo_column->set_zero( if_salv_c_bool_sap=>false ). " hide zero
ELSE.
lo_column->set_technical( if_salv_c_bool_sap=>true ). " hide col
ENDIF.
ENDLOOP.
ENDFORM. " MODIFY_COLUMNS
Regards
Uwe -
Drill down capabilities for an alv grid display field using oops concept
Hi All,
could anyone help me in how to achieve the drill down capabilities for an alv grid display field using oops concept.
Thanks & Regards,
padmasri.padmasri,
Hope your requirement is something like, when you click on a sales order number it should display that order (VA03), in a grid output displayed using set_table_for_first_display.
you can acheive it using event double click.
*& L O C A L C L A S S E S - D E F I N I T O N *
class lcl_event_receiver: local class to handle event DOUBLE_CLICK
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
METHODS:
HANDLE_DOUBLE_CLICK
FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW E_COLUMN.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
*& L O C A L C L A S S E S - I M P L E M E N T A T I O N *
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_DOUBLE_CLICK.
PERFORM HANDLE_DOUBLE_CLICK USING E_ROW
E_COLUMN.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
FORM HANDLE_DOUBLE_CLICK USING E_ROW TYPE LVC_S_ROW
E_COLUMN TYPE LVC_S_COL.
DATA: LS_DETAIL LIKE LINE OF T_OUTPUT.
WHEN 'T_OUTPUT'.
READ TABLE T_OUTPUT INDEX E_ROW-INDEX INTO LS_DETAIL.
If clicked on PO Number or PO Item, call ME23
IF E_COLUMN-FIELDNAME = 'EBELN' OR
E_COLUMN-FIELDNAME = 'EBELP' .
SET PARAMETER ID 'BES' FIELD LS_DETAIL-EBELN.
SET PARAMETER ID 'BSP' FIELD LS_DETAIL-EBELP.
CALL TRANSACTION 'ME23' AND SKIP FIRST SCREEN.
If clicked on sales order number or item, call VA03
ELSEIF E_COLUMN-FIELDNAME = 'VBELN' OR
E_COLUMN-FIELDNAME = 'POSNR'.
SET PARAMETER ID 'AUN' FIELD LS_DETAIL-VBELN.
SET PARAMETER ID 'APO' FIELD LS_DETAIL-POSNR.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
Hope this helps -
Field Catolgue in alv grid display
Hi Abapers,
I need to display the percentage rows with decimals and other rows without decimal . Is their any option in field catalog to do like this. Or tell me any other alternative to achieve this.
sno total col1 col2 col3
1 220 100 20 100
2 320 120 50 150
tot 540 220 70 250
per 40.74 1.87 and so on
or ,
I have two different internal tables how can i put it in one field catalog to pass it to alv grid display.
Regards,
PriyaDon't do total by your self in the Pogram.
in the Fieldcatalog there is an Attribute which will do total & Average .
Enable it so that from one internal table data it self it will do good.
example program
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
Data declaration
Data retrieval
Build fieldcatalog
Build layout setup
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
gowri
Message was edited by:
Gowri Krishna -
Update values in AlV grid display after entering value
Hi,
I have an issue in ALV grid display.
Let me explain.
i have 8 fields to display in which one is editiable.
Fields are: date
material,
material Description,
Opening Stock,
Closing stock- ( this field is editiable)
Closing stock,
Received Stock,
Actual production.
Actual production = Closing stock + removal stock
- receipt stock - opening stock.
when i change the value of closing stock and press enter, actual production should get update, the new values should display.
Thany you in advance.Hi,
Please refer the code below:
REPORT z_demo_alv_jg.*******************************************************************
* TYPE-POOLS *
TYPE-POOLS: slis. *******************************************************************
* INTERNAL TABLES/WORK AREAS/VARIABLES *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.*******************************************************************
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.*******************************************************************
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c,
lines(5) TYPE n.*******************************************************************
* START-OF-SELECTION *
START-OF-SELECTION.* Storing table name
p_table = tabname.* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'. LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>. SORT i_fieldcat BY col_pos.* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS. REFRESH <dyn_tab_temp>.* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc <> 0. ENDIF.*&-----------------------------------------------------------------*
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab. SET PF-STATUS 'Z_STANDARD'.ENDFORM. "SET_PF_STATUS*&----------------------------------------------------------------*
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.* When a record is selected
WHEN '&IC1'.* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex. IF sy-subrc = 0.* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'Z_DEMO_PDF_JG'
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.* Make all the fields input enabled except key fields
w_field-input = 'X'. MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL. ENDIF.* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc = 0.* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF. ENDIF.* When save button is pressed
WHEN 'SAVE'.* Sort the index table
SORT i_index.* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index. LOOP AT i_index.* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF. ENDLOOP.* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3. IF sy-subrc = 0.* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>. REFRESH <dyn_tab_temp>.* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table. ENDIF.
ENDCASE. rs_selfield-refresh = 'X'.ENDFORM. "user_command
Thanks,
Sriram Ponna. -
How to capture the checkbox status in ALV Grid display
I need some immediate help regarding Grid ALV.
My Requirement: I need to display an ALV grid report along with checkboxes. Further, I need to provide an option wherein the user can checkboxes and select the records that I need to process further (by clicking the process button on the ALV Report).
My Query: The problem here is that I am not able to capture the status of the checkboxes. This means that I am not able to capture which of the records have been selected by checking their resp checkboxes.
Solutions that I have tried: I have tried capturing the same at user command by checking the value in slis_selfield. But all the records show the value as 1 for the checkbox field.
Kinldy suggest how to go about it.
I am not using Object Oriented ALV. Please suggest something to be used in ALV Grid display in 4.6C version.
Regards,
NamrataHere is a Sample code , it might help you
TABLES : sflight.
TYPE-POOLS: slis.
DATA : w_repid LIKE sy-repid.
w_repid = sy-repid.
DATA: BEGIN OF it_sflight OCCURS 0,
checkbox(1),
carrid LIKE sflight-carrid,
END OF it_sflight.
*layout
DATA: wa_layout TYPE slis_layout_alv.
*field catalog
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
wa_fieldcatalog TYPE slis_fieldcat_alv.
START-OF-SELECTION.
SELECT carrid FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_sflight.
END-OF-SELECTION.
CLEAR it_fieldcatalog.
REFRESH it_fieldcatalog.
wa_fieldcatalog-fieldname = 'CHECKBOX'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m = 'Chk'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'CARRID'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m = 'Carrid'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
is_layout = wa_layout
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = it_fieldcatalog
TABLES
t_outtab = it_sflight
EXCEPTIONS
program_error = 1
OTHERS = 2.
*& Form USER_COMMAND
FORM user_command USING p_ucomm TYPE sy-ucomm
p_selfld TYPE slis_selfield.
CASE p_ucomm.
WHEN '&DATA_SAVE'.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref1.
CALL METHOD ref1->check_changed_data.
LOOP AT it_sflight WHERE checkbox = 'X'.
DELETE it_sflight INDEX sy-tabix.
ENDLOOP.
p_selfld-refresh = 'X'.
ENDCASE.
ENDFORM. "user_command -
Problem with ALV Grid Display screen Back Button
Dear Friends ,
I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
Please Suggest if i have to take care of something else.
I want my Selection Screen when i press Back on my Display Screen.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
Thanks and Regards,
AshwiniHi Vijay ,
No i dont have any write statement in my proggram.
Here it is
REPORT ZRMMPD01A NO STANDARD PAGE HEADING.
TABLES : EQUI,SER03,MKPF,OBJK.
TYPE-POOLS : SLIS.
DATA IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
DATA IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
DATA IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF IT_DISPLAY OCCURS 0,
MATNR LIKE EQUI-MATNR,
SERNR LIKE EQUI-SERNR,
BWART LIKE SER03-BWART,
WERK LIKE SER03-WERK,
CHARGE LIKE SER03-CHARGE,
LAGERORT LIKE SER03-LAGERORT,
MBLNR LIKE SER03-MBLNR,
MJAHR LIKE SER03-MJAHR,
ZEILE LIKE SER03-ZEILE,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
USNAM LIKE MKPF-USNAM,
XBLNR LIKE MKPF-XBLNR,
END OF IT_DISPLAY.
DATA : WA_DISPLAY LIKE IT_DISPLAY.
DATA IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
START-OF-SELECTION.
*Fetch Data.
PERFORM GET_DATA.
*Fill Display Fields.
PERFORM FILL_TABLE.
*Segregate data according to radio button selection.
PERFORM SELECT_CONDITION.
*Fill The Feild catalog.
PERFORM FIELD_CATALOG.
*Display Output.
PERFORM OUTPUT_DISPLAY..
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT * FROM EQUI INTO TABLE IT_EQUI
WHERE MATNR IN S_MATNR
AND SERNR IN S_SERNR.
SELECT * FROM OBJK INTO TABLE IT_OBJK
FOR ALL ENTRIES IN IT_EQUI
WHERE EQUNR = IT_EQUI-EQUNR.
SELECT * FROM SER03 INTO TABLE IT_SER03
FOR ALL ENTRIES IN IT_OBJK
WHERE OBKNR = IT_OBJK-OBKNR
AND MBLNR IN S_MBLNR
AND BWART IN S_BWART
AND WERK IN S_WERK
AND LAGERORT IN S_LAGET.
SELECT * FROM MKPF INTO TABLE IT_MKPF
FOR ALL ENTRIES IN IT_SER03
WHERE MBLNR = IT_SER03-MBLNR
AND BUDAT IN S_BUDAT
AND XBLNR IN S_XBLNR.
ENDFORM. " GET_DATA
*& Form FILL_TABLE
text
--> p1 text
<-- p2 text
FORM FILL_TABLE.
LOOP AT IT_EQUI.
LOOP AT IT_OBJK.
IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
SKIP.
ELSE.
READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
IF SY-SUBRC = 0.
WA_DISPLAY-MATNR = IT_EQUI-MATNR.
WA_DISPLAY-SERNR = IT_EQUI-SERNR.
WA_DISPLAY-BWART = IT_SER03-BWART.
WA_DISPLAY-WERK = IT_SER03-WERK.
WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
IF SY-SUBRC = 0.
WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
WA_DISPLAY-USNAM = IT_MKPF-USNAM.
WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
ENDIF.
ENDIF.
ENDIF.
IF NOT WA_DISPLAY IS INITIAL.
APPEND WA_DISPLAY TO IT_DISPLAY.
CLEAR WA_DISPLAY.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDFORM. " FILL_TABLE
*& Form FIELD_CATALOG
text
--> p1 text
<-- p2 text
FORM FIELD_CATALOG.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MATNR'.
FIELDCAT-SELTEXT_M = 'Material Number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'SERNR'.
FIELDCAT-SELTEXT_M = 'Serial number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MBLNR'.
FIELDCAT-SELTEXT_L = 'Number of material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BWART'.
FIELDCAT-SELTEXT_M = 'Movement type'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'WERK'.
FIELDCAT-SELTEXT_M = 'Plant'.
FIELDCAT-OUTPUTLEN = 5.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'CHARGE'.
FIELDCAT-SELTEXT_M = 'Batch number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'LAGERORT'.
FIELDCAT-SELTEXT_M = 'Storage Location'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MJAHR'.
FIELDCAT-SELTEXT_M = 'Material doc. year'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'ZEILE'.
FIELDCAT-SELTEXT_L = 'Item in material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BUDAT'.
FIELDCAT-SELTEXT_L = 'Posting date in the document'.
FIELDCAT-OUTPUTLEN = 10.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BKTXT'.
FIELDCAT-SELTEXT_L = 'Document header text'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'USNAM'.
FIELDCAT-SELTEXT_M = 'User name'.
FIELDCAT-OUTPUTLEN = 15.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'XBLNR'.
FIELDCAT-SELTEXT_L = 'Reference document number'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
ENDFORM. " FIELD_CATALOG
*& Form DISPLAY_OUTPUT
text
--> p1 text
<-- p2 text
FORM OUTPUT_DISPLAY.
IF R1 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_DISPLAY
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ELSEIF R2 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form SELECT_CONDITION
text
--> p1 text
<-- p2 text
FORM SELECT_CONDITION.
IF R2 = 'X'.
CLEAR WA_DISPLAY.
SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
IF SY-SUBRC = 0.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY.
IF WA_DISPLAY IS INITIAL.
WA_DISPLAY = IT_DISPLAY.
ENDIF.
LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
AND SERNR = WA_DISPLAY-SERNR.
IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
WA_DISPLAY = IT_DISPLAY.
ELSE.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
APPEND WA_DISPLAY TO IT_TEMP.
CLEAR WA_DISPLAY.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP.
IF NOT IT_TEMP[] IS INITIAL.
IT_FINAL[] = IT_TEMP[].
ENDIF.
ENDIF.
ENDFORM. " SELECT_CONDITION
Regards,
Ashwini -
How to devide the top of page in alv grid display
hi all
in the alv grid display am getting the page number and total number of pages in the left hand side
but what i need is i need in the right hand side
how to get thatHi,
PLease refer to the code below:
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
* Form TOP-OF-PAGE *
* ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
* Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
* Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
* Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
* i_logo = 'Z_LOGO'.
endform.
* FORM USER_COMMAND *
* --> R_UCOMM *
* --> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
WHEN '&IC1'.
* Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
* Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
* Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
* Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
* Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
* Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
Thanks,
Sriram Ponna. -
Update all alv (grid) displayed records to internal table
Hi all,
i want to update the records into the internal table which are changed by the user in the edit field.
after he select save button.
i have to save the ALV grid displayed records in the internal table.
hw can i do this ?ALV with EDIT and SAVE functionality
Code:REPORT z_demo_alv_jg.*******************************************************************
TYPE-POOLS *
TYPE-POOLS: slis. *******************************************************************
INTERNAL TABLES/WORK AREAS/VARIABLES *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.*******************************************************************
FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.*******************************************************************
SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c,
lines(5) TYPE n.*******************************************************************
START-OF-SELECTION *
START-OF-SELECTION.* Storing table name
p_table = tabname.* Create internal table dynamically with the stucture of table name
entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'. LEAVE TO LIST-PROCESSING.
ENDIF.
Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>. SORT i_fieldcat BY col_pos.* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS. REFRESH <dyn_tab_temp>.* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc <> 0. ENDIF.&----
*& Form SET_PF_STATUS
Setting custom PF-Status
-->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab. SET PF-STATUS 'Z_STANDARD'.ENDFORM. "SET_PF_STATUS&----
*& Form user_command
Handling custom function codes
-->R_UCOMM Function code value
-->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.* When a record is selected
WHEN '&IC1'.* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex. IF sy-subrc = 0.* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'Z_DEMO_PDF_JG'
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.* Make all the fields input enabled except key fields
w_field-input = 'X'. MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL. ENDIF.* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc = 0.* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.* If the record is changed then track its index no.
and populate it in an internal table for future
action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF. ENDIF.* When save button is pressed
WHEN 'SAVE'.* Sort the index table
SORT i_index.* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index. LOOP AT i_index.* Find out the changes in the internal table
and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF. ENDLOOP.* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3. IF sy-subrc = 0.* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>. REFRESH <dyn_tab_temp>.* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table. ENDIF.
ENDCASE. rs_selfield-refresh = 'X'.ENDFORM. "user_command -
TOP OF PAGE in ALV Grid Display in ECC 6.0
Hi,
I have an issue with top of page in Alv grid display
in ECC 6.0. I searched the forum for this, but
couldnt fine any solution.
I am using Reuse_alv_commentary_write to display the header.
It's working fine in 4.7E but the same code is not working in
ECC 6.0. The header is shown as empty.
I tried to execute some other programs with same FM and
even standard SAP Prgrms too, even they raise the same issue
the top of page is empty.
Please suggest any other FM or approach to use in ECC 6.0 to get the top of page.
Thanks in advance
Kaavya.hiii
use following code
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'F0020_TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
i_structure_name = 'I_OUTPUT'
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT = wa_layout
it_fieldcat = i_fieldcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
i_default = 'X'
i_save = 'X'
is_variant = wa_variant
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
FORM f0020_top_of_page.
DATA: i_listheader TYPE slis_t_listheader WITH HEADER LINE,
w_date like sy-datum.
move:
'H' TO i_listheader-typ,
' Corporation' TO i_listheader-info.
* text-021 TO i_listheader-info.
*write: 'Camtura Corporations'.
APPEND i_listheader.
WRITE sy-datum TO w_date.
move:
'S' TO i_listheader-typ,
'Execution date' TO i_listheader-key,
w_date TO i_listheader-info.
APPEND i_listheader.
regards
twinkal
Maybe you are looking for
-
Is photostream compatible with windows 8?
Is photostream compatible with windows 8? I installed windows 8 on my computer now my photo's won't save to photostream on the computer they do on the phone just not the computer?
-
When i plug in my ipod it does not pick it up. I've: -Re-installed itunes -Restarted Computer -Tried Different USB Ports -More PLEASE HELP!
-
Error when DBMS_LOB.FILEOPEN , why ?
Hi.. I create a directory , example : ULLOA "create or replace directory ULLOA as 'c:\';" This path (c:\) are inside of the server.. But , when execute the block pl/sql l_bfile := bfilename( 'ULLOA', 'setup.txt' ); dbms_lob.fileopen( l_bfile ); Obtai
-
WPF+MAF - addin referenced libraries are not loaded?
Hi! I'm new to Add-in framework. Now I'm trying to create WPF addin that returns UserControl (according to https://msdn.microsoft.com/en-us/library/bb909849(v=vs.110).aspx). The problem is that when I try to get user control from addin, Exceptions ar
-
Anyone have any input on this. I received paid licenses for WL 5.1, installed them in the appropriate WebLogicLicense.xml file (which is in the classpath), and am now getting the following error: $$$$$$$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$