Use of "NEW FROM PACKAGE" in SAP 8.8 And Master Layout creation
Dear Expert,
A)
How to use "NEW FROM PACKAGE" option at time of choosing company.
and also how to create .pak file ???
Even I don't know by using this feature what are the scope.
B)
How to create master layout in 8.8 when I am using crystal Report.
Thanks
King Kevin
Hi Kevin.....
When you install SAP you have to install Solution Packager also. which will help you to create the .pkg file of your database which will then be used in New From Packager......
And for Master Layout you can import the PLDs as you created independent Via. Reports And Layout. It will ask you the path to store the PLDs. Give the relevant path and your Crystal Report will be executed......
Regards,
Rahul
Similar Messages
-
New From Package @ Choose company menu
Hi to All
what is the use of New From Package @ Choose company NEW menu ? How to work on it for creation of new company through it?
Thanks advance
KomanduriHi Komanduri......
Solution Package is used as Back up of a fresh setup for any project.
Suppose you have implemented into any particular vertical let say Chemical industry so you can create a
package in which all the Items and initial setups are same and you have to only enter BP and its COA as per company specific.
For this you should have solution packager installed while installing SAP.
Then whith the help of solution packager you can create your own vertical and can use for another comapny who is into the same profession......
Hope you got this........
Regards,
Rahul -
Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to.
If you don't have a backup you can resort to give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT -
My home was recently burgularized and my Intel MacBook Pro was stolen I had a backup but my other computer is a G5 PowerPC running 10.5.8 and I am getting the following error:
You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
Obviously I cannot install a newer version of iPhoto on my G5 so what recourse do I have to get my images back?
HelpYou have two options:
Run the Library on a machine that has the same version as the machine that was stolen.
or
Recover the files from this library and start over from scratch.
To recover the files:
Go to your Pictures Folder (or whereever you have the back up) and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Your originals are in the Masters folder.
Note this will only recover your photos as imported from you camera.
Regards
TD -
I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...
iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2 -
When opening the version of Iphoto i have an error message appears that says; You can't open your current iphoto library using this version of Iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto. What? If I can't open the current library using the latest version of iphoto, and I am asked to make changes the the newest version!!! I'm asked to run in circles chasing my tail...I had a new hard drive installed about 6 weeks ago. I am running MAC OS 10.5.8
What version of iPhoto do you have? If you're on 10.5 then you're not running the latest iPhoto
Any chance that the library was opened with another version?
Simplest solution will be to just restore from your back up. -
You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
This is the message I'm getting when I try to open iphoto. This happened after a member of the genius bar fixed the problem with the download of the update of the Mac OSX combined.Well, I'll guess it's iPhoto 11 then.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I keep getting this message. What do I do? You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
https://itunes.apple.com/ca/app/iphoto/id408981381?l=en&mt=12
-
i got my new iphone a week ago. i started using it straight away, before i knew about icloud and that i could sync all my contacts, etc to the new phone. i then turned on icloud for contacts - this worked fine. today i tried putting my music onto my phone. i clicked 'recognise a B's iphone' in itunes - this has synced music and apps. the only problem is that i have lost all my text messages from the last week. the phone is showing old messages from december 2012 only! can i delete these and get my recent messages back??
thanks.
balerina.You did more than sync the new iPhone with iTunes since syncing with iTunes does not include text messages.
The first time a new iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or set up the device as a new iPhone.
The former replaces all data on the iPhone that is included with the selected backup for the other iPhone or iOS device. The latter does not.
If a backup for your new iPhone was not created with iCloud or if created and has been updated since the backup was transferred from the other iPhone or iOS device, the previous data on the new iPhone is gone. -
Creating New Dashboard Packages for SAP Business One
Hi Experts,
I am learning how to create my dashboard for Business One on version 9.1PL04.
In this step.
http://businessone91:8080/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_X…
The URL can't returns an XML data sucessfully.So, i try to through IE browser to access this URL.
SAP B1iP detected an error:
Emitted HTTP-Code:
500 - Internal Server Error
Internal Reason:
Server side cannot respond your request (No scenario step (vBIU) assigned for step for sender system (SysId) [0009] [incoming identifier = 'io'])
Recommendation:
Check for the correctness of your activity or environment or ask your system-administrator for further help.
tid
TID: 15031009242239306682A9FEA29322F6
Full Internal Error Message:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception:
com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.util.NestedException: Server side cannot respond your request (No scenario step (vBIU) assigned for step for sender system (SysId) [0009] [incoming identifier = 'io'])
Log-ID:
LID15031009242239306858A9FEA2931BD0
How can i slove this problem?Thanks for your help.Hi David,
I also seek help for the dashboards, no doubt its matter of practise but like we are facing the problems where we have to map our query structure with Excel sheet.
like I'm facing a problem where my Query accepts two parameters in SAP B1.
In Xcelsius I mapped almost everything and these two parameters are accumulated by 2 combo's but when I make a XML data connection and use trigger cell option , it just takes one combo into consideration.
Expected result is : If I change the value in any of the combo then it shud reflect results accrodingly
Actual result : if I change the value of 2nd combo it doesn't reflect the changes until I select the value from first combo again.
Any inputs will be really very much appreciated.
Regards -
I'm trying to download an app off of the App Store and the little cloud pops up next to the app I wanna download because I used to have it when I had my old Apple ID. How do I get this off so I can get the app again using my current Apple ID?
Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID. -
I need to remove "air." from package name. I'm get a Layout xml error when repackaging android app..
So, i'm doing this on my own app. I made an update for an older app that was build using Native Android. But this time, i used Adobe AIR... The catch is Adobe likes to append a "air." to the front of your package name without asking you. So basically I can't upload my update because it has a new package name is now "air.com.mycompany.myapp" rather than the original "com.mycompany.myapp"
Basically I'm going through this guide..
http://helpx.adobe.com/air/kb/opt-out-air-application-analytics.html
I followed all the steps, made all the adjustments to the androidmanifest.xml like it asks.
But after going along with the above guide, with no issues when i get to the step that says
"Run the following command to create the resource file for the updated AndroidManifest.xml:"
I run this..
"/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platform-tools/aapt" package -f -M AndroidManifest.xml -F resources.arsc -I "/Users/brybam/Documents/eclipse/android-sdk-mac_x86/platforms/android-8/android.jar" -S ./res
But I keep getting the same error regarding the xml files in res/layout
./res/layout/expandable_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/expandable_multiple_chooser_row.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/main.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/multiple_file_selection_panel.xml:1: error: Error parsing XML: not well-formed (invalid token)
./res/layout/ssl_certificate_warning.xml:1: error: Error parsing XML: not well-formed (invalid token)
The guide doesn't say anything about these xml files, and im not sure what to do with these or how to handle them.
If i go into the res/layout folder, and just delete these (i know they're necessary. But i just deleted them as a test, to get through the rest of the guide...)
I was able to get through the rest of the steps in the guide fine, make an apk, and put it on my phone...only to find out the app will crash the moment you try to run it. Probably because i deleted the layout xml files...But i cant get the command i need to run above to accept them!
So, earlier in the guide they have me use thing thing called the "AXMLPrinter2.jar" to make the AndroidManifest.xml readable so i can edit it.
I run something like this:
java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" AndroidManifest.xml > AndroidManifest.xml.bk
This makes a new file "AndroidManifest.xml.bk" and i can edit that.
So, I was thinking with all of these layout xml files, maybe I could run this "AXMLPrinter2.jar" on them and then edit them. Because right now if you open them they're not human readable, and its hard for me to work on them if they're not...
I tried this thinking i could do the same thing...
java -jar "/Users/brybam/Desktop/repackage/AXMLPrinter2.jar" main.xml > main.xml.bk
Just get a blank file and a console erorr when trying to use the AXMLPrinter2.jar on the layout xml files...
java.lang.ArrayIndexOutOfBoundsException: 67
at android.content.res.StringBlock.getShort(StringBlock.java:231)
at android.content.res.StringBlock.getString(StringBlock.java:91)
at android.content.res.AXmlResourceParser.getName(AXmlResourceParser.java:140)
at test.AXMLPrinter.main(AXMLPrinter.java:56)
So, I think my whole issue is based around these XML files not being converted to human readable before i try and re-package....
EDIT:::
Ok, so I found a site that talks about the error I'm getting but it's in chinese, and even after translating the page...I'm still not well versed with terminal and this stuff to get it.
It reads:
"Error.
Final conclusion:
In minSdkVersion <= 7, AXMLPrinter2.jar can normally decompile xml file
Greater than 7 can not be normal decompile xml file (AndroidManifest.xml except)
Give way to share a batch decompile xml file:
First, create a *. Txt file
Stresses inside the content authoring
for / r layout%% a in (*. xml) do @ java-jar AXMLPrinter2.jar "%% a" >> "%% a". txt
Then this txt file extension into bat form, and this BAT the file and AXMLPrinter2.jar on the same directory will be decompiled xml into the layout directory
Decompilation results can be generated by executing the bat file multiple xml files."
- http://hi.baidu.com/ghcghc/item/ecbaa1ce997cb225a0b50ac2
Maybe someone with more know-how could explain what they're explaining? I get that he's saying the issue im seeing appears when you're using minSdK <=7 but I need to use minSdk 8. Does anyone understand this work around? And how I might go about it on a Mac with terminal?
I wish adobe would make it easy to remove the "air." from the package name. If they want to convert old Native devs to AIR devs...the transition needs to be seamless. But now I'm about to have to go back to Native because I can't update an app I already have out on the market with an air app.Hello~
I also tried to remove "air." package name in air application. And i encounter the same problem.
I do not find any solution to decode the xml inside res folder by AXMLPrinter2.jar. And those xml inside is compressed which is unreadable.
However, what you can do is copying the structure of res folder. And go to your air sdk file path - adobeair-sdk-folder/lib/android/lib/resources/
Replace those file exists in your res folder. And copy "values" folder to your res folder.
Hope this solve your problem~ -
New Server for Preview SAP WAS ABAP and Java
Hi
I wish to purchase a new PC or server to specifically house my ABAP and Java preview installations rather than have them running on an old PC and laptop.
Anyone out there got some recommended configurations? Max spend will be £1500.
Cheers
IanIan,
Personally I wouldn't be happy running a server 24/7 at home but would want to just switch it on and the server start so would be looking to have some sort of script to run the relevant WAS instances automatically on startup.
160Gb hard drives would be ample. Could consider increasing the storage and then the system could double up as a backup device as well as a SAP server.
I've built systems in the past and that's the approach I'd take for this too. I don't mind buying pre-built systems but I
detest all the rubbish software they bundle with them. If you build it yourself you can install just Windows and it'll run like a dream.
This bundle looks interesting:
http://www.overclockers.co.uk/showproduct.php?prodid=BU-039-OK
The motherboard takes four memory modules so the 2Gb would consume two of these allowing for upgrades in the future if deemed necessary. Add in a couple of HD's, a DVD-RW, a cheap gfx card and a case and you'd easily get change from £800. Could spend a bit more to get more silent components too.
Now I've had a look around and priced them up I'm even more tempted!!!
Cheers,
JB -
My son just bought me a new Air Book in the States. As I am out of the country, I can't try things like headphones out myself. Need the headphones to give classes on Skype, probably from a fairly noisey location. Wonder if someone who is familiar with the range of headphones can suggest what would be best for use with my Air. (I dislike my current, large ear-pad clumsey ones and would prefer something much smaller and more compact.)
Thanks for your help.lunastrixae wrote:
1) Since I've bought it, people on the other end have a hard time hearing me. They say it sounds like I'm in a tunnel. I do not have a shell case on the phone, or my hand over the microphone. It's not dirty.
If your phone is still under warranty, I'd make an appointment at the Genius Bar.
2) The ringer, even cranked up with an obnoxious ringtone, is way too quiet. If the phone is in my jacket pocket, or more then 15 feet away I will never hear it. In contrast, my husband's el-cheapo free cell phone rings and I can hear it through my whole home.
I find the audible rings to be very loud on the iPhone. If you're having problems hearing them, you may have a defective phone. -
Is the new glibc package suppose to remove /lib and /lib64 links?
I haven't updated in a month since 12/24. I recently updated on 1/23. I didn't use any --force commands, only --ignore filesystem on the first pass. Right after pacman upgraded glibc, no executable can be ran. I found out it is because it removed the symbolic links /lib and /lib64. Is this suppose to happen? Why something so dramatic happened without force command?
Thanks for all your help, Scimmia. I managed to fix my system.
In case anyone else have the exact same problem as me, after I used --force to upgrade both filesystem and glibc, I met an error message saying that my root partition can not be found. Just follow the instructions through this link:
https://wiki.archlinux.org/index.php/Pa … onger_boot
There is one thing that I am still worried about. Everything runs fine now, and I haven't seen any problems stemming from this yet. Before I messed up my system and right after upgrading glibc, no executable can be ran, so every package that I upgraded afterwards resulted in some failure. Is this failure important?
( 3/182) upgrading desktop-file-utils [######################] 100%
( 4/182) upgrading linux-api-headers [######################] 100%
( 5/182) upgrading glibc [######################] 100%
warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
call to execv failed (No such file or directory)
error: command failed to execute correctly
( 6/182) upgrading gcc-libs [######################] 100%
call to execv failed (No such file or directory)
error: command failed to execute correctly
( 7/182) upgrading soundtouch [######################] 100%
( 8/182) upgrading audacity [######################] 100%
call to execv failed (No such file or directory)
Last edited by bwang8 (2013-01-29 01:45:16)
Maybe you are looking for
-
i completely lost access to mail after installing iOS 6.0.1. The app 'mail' won't even open now. How do I fix this?
-
How do I increase print size which changes suddenly from readable to too samll to read
While writing an E-mail, the screen changes suddenly from full screen to a small representation which I can hardly read. Why does this happen and how can I reverse the screen to where it started
-
Hello, I made an update to version 7.1.1 and after that i can connect to wifi only at a few cm from router if i get more distance betwen iPad and router i get message " Unable to connect to.. ". Can be that bug from iOS or ca be from wifi antena (i h
-
Lens Correction and Cropped Pixels
I'm starting out as an architectural photographer, and as I don't yet have a perspective correcting lens to adjust images in-camera, I need to use the Lens Correction tools in Photoshop and ACR. I prefer to use them over the Free Transform tool for
-
Error Duplicate articles at PO created by the Process Planning (WRP1)
Hi people, I need help with the next issue described below: I am confronting an error after running the TX WRP1 for replenishment of stores, it happens that some of PO generated by the replenishment process contains some articles duplicated, the firs