Use of Services without SR and ESR

Hello, for this one I need to explain something:
I'm writing my diploma about ESOA. Because of this I allready have created a application which uses Enterprise Services. But because I used the ESWorkplace I've had some restrictions.
- If I used the SR of the ESWorkplace together with a in my CE generated Destination I could not use the Services because the SR gave me the SAP internal URL to the service(iwdf...) which I could not reach. I solved this problem the following way:
- Get the Service-WSDL-Url from the ESWorkplace
- Create a WSDL Destination in the CE with the WSDL-URL from above and the System-Data of HU2
- Use this Destination in WD Java for an adaptive Web Service Model and again the WSDL-URL
With these steps I was able to use the Services. But I had to create a destination for every single Webservice. It's ok, it worked and this was everything I wanted. But as a result of this I haven't used the ESR and the SR at all. Because all i needed was the WSDL-Url of the service and the system data of the corresponding System.
Now the question comes up: In case of a ERP System with installed Enhancement Packs without an SR or ESR: Would I be able to use the Services in the same way? I mean: in /wsadmin on HU2 I'm able to get the wsdl-Url. But could this information also be found there without a SR or ESR?
I have tried to use the services of a CRM 2007 System (which has preinstalled services as CustomerQuoteByID) we physically have here in our company. But I simply don't get the needed WSDL-URL. In fact the Service can't be found in /wsadmin. Is this because of the missing SR and ESR? Or am I doing something wrong?
I really don't get the neccessarity of the SR and ESR at all. Ok, I know what I can do with them. Modelling Services with the ESR or using them if I don't have a supplier. And Browsing available Services in the SR. But if a customer has no CE or PI and because of this no SR and ESR: Would there be a way for using his services. Don't get me wrong: I know how to use bapis and rfcs, and I also know the the ES only use the BAPIs with an additional Interface with some extra functionality like failure and exception handling. But how to use these ES without the ESR and SR?
I hope you understand my question. I would be very happy about an reply!
Geetings, Marco

Hello!
I'm trying to use a ResourceBundle to store properties
that arn't locale-specific - its a sort of
look-and-feel type arrangement. The way more specific
ResourceBundles inherit properties from more general
ones would be really useful, but since its not a
locale that's used to pick a particular bundle I'm
having trouble working out how I can use it for this
purpose.
Has anybody used ResourceBundles for non-locale
specific uses before, or does anyone know of anything
else that might be more appropriate?
Thanks loads for any help!!
NicolaYes, you make up your own Locales with anything you want in place of the language, country, and variant. As long as you're not setting the Locale, it works great!
ResourceBundle laf = new ResourceBundle.getBundle("skins.properties", new Locale("flavor", "chocolate",""));will get all resources in skins.properties and over-riding entries from skins_flavor_chocolate.properties".

Similar Messages

IDOC - PO Creation using a service without master record

I can not find the field to populate the cost center when i create a PO using a service without master data (buy using Material Group) via transaction WE19.
The accounting information is present on "E1BPMEPOACCOUNT" segment, but the cost center and G/L Account in this segment were not recognized by IDOC because this segment is used to populate Account Assignment tab on Item Detail Level and my problem appear one step before when after I populate the service tab at Item Detail Level and press .
In few words I didn´t find the correct field to populate the cost center on Basic type "PORDCR101".
I tried populate the field COSTCENTER on the segment "E1BPMEPOACCOUNT" but didn´t work.
Maybe is there another basic type to use in this specific case?
Thanks a lot.
Kind Regards,

Hi,
In the inbound side create a new entry in WE57 tcode.. with the functio mdoule as "IDOC_INPUT_ORDERS", basic type "ORDERS05", extn< specify the extn u created at outbound side>, message type "ORDERS". Now see if it is working.
Regards,
Nagaraj

Use SAP service without XI/PI? Need answer for mgmnt mtg in 30 min

Trying to read SDN info in last hour, but can't see definitely that a SAP web service can be available for external appl... without using SAP PI (which we've not used). All diagrams/text seem to indicate XI/PI as dependent component.

I believe you could still configure direct/point-to-point communication without using XI/PI. Web Services/Enterprise Services can be provided/consumed from an SAP system using ABAP proxies, configuring logical ports, SOAMANAGER. But XI/PI is useful in mediated scenarios and has an option to guarantee Reliable Messaging. Below is one link I bookmarked during some research around eSOA from long time back, may be it might be helpful to you. Also, I am pretty sure you can do Synchronous web services/Enterprise Services without using XI/PI (i.e. point-to-point communication) but not sure if you can use Asynchronous services without XI/PI.
http://help.sap.com/esoa_docu_print/crm/51/Docu_ES_CRM_51SP03_EN.pdf

Use Enterprise Services without service registry?

Hello experts,
this question is following me since days: is it possible to use enterprise services from an erp-system without a service registry?
From my understanding the service registry at runtime determines the endpoint where the service is implemented. But when there is just a single erp-system is it then possible to use this services without any additional systems?
Thanks for any answer.
Regards,
Norbert

Yes you can.
The service registry is just a "phone book" of services. as much as phone numbers exist well without the phone book services exist without a registry.
actually, if you really ever have only one source system for enterprise (or other) services you don't need the service registry. even if you have 3 source systems and you know how to find an overview of the services in each of those 3 systems and if you don't use a 'global' data model you do not really need the service registry.
but this is just my 2 cents. 'publishing' seems to be a common source of joy these days
anton

HT4995 Internationally using Location Services without having data charges. What settings should use on my iPhone 5?

I'm traveling to Europe and I want to use Location Services without having data charges. What settings should use on my iPhone 5? I want to be able to use Trip Advisor City Guides Application to tour around cities for free. I have a Verizon International Plan for my trip, but it is still pricey. I would like to keep my iPhone cell services on for incoming calls, but I want to prevent international data charges. Thanks for your help!

You don't "choose" to use th 3g network.
If you have paid for it in your plan and 3g coverage is available, your phone will automatically use it when necessary.
3g provides faster internet speeds than 2g, so you can watch video or download stuff faster. Wifi is normally faster than 3g.
Your iphone gps is "assisted", meaning it uses network data to calculate your position.
Also, you would still need the network to download maps, directions etc as they are not on your device.

How do I create and use a ringtone without syncing and without jailbreaking?

How do I create and use a ringtone without syncing and without jailbreaking?

You create ringtones on your computer and sync them to your iphone.
You can buy ringtones from the ringtones section (at the bottom of the screen when you open itunes) of the itunes app on your iphone.
There may be apps that will do this - not sure.

How to use Enterprise Services without ESR.

Hello,
We use SAP ERP6.0.
We would like to use SAP Enterprise Services as a evaluation by .NET application.
We do not have SAP NetWeaver PI and CE now.
Without ESR (PI and CE) , how do I configure ERP 6.0 to use Enterprise Services?
Please let me know.
Best regards,
Koji Nagai

Hi,
ESR is not compulsory for just consuming service.
First you need to activate and configure webservice.
Step1: Goto transaction SICF and activate service you want to evaluate. You can find ES under path: /default_host/sap/bc/srt/xip/sap/
Step 2:Goto transaction: SOAMANAGER and under tab: Application and Scenario communication chose single service administration. Now search for "Service" pattern: service name you selected and activated in SICF field = Internal name. then go.
Step 3: you will be able to see your service here, now select service and click on apply selection.
Step 4: Under the "configuration" tab select "Create service" button. Give any name to "New Service Name" type some description and finally give any name to "New Service Name" and apply setting.
Step 5: Select authentication type http and save,
Now under tab "Overview" you can see some url for "Open WSDL document for selected binding" use this url in your .Net application.
Regards,
Gourav
Ps: I always have ESR and all necessary configuration so don't know if required settings available in your system to work this scenario.

How to use KDE services without KDE?

I am actually playing around with a very interesting FVWM configuration, I found in the FVWM forum, but not using KDE, there is always something missing, like kmilo & klaptopdaemon or the KThinkBat panel applet (which is the only one using smapi for reading battery status).
I was wondering, if there is a way to start all of the usual KDE services without actually starting KDE as a DE, so I mean about everything that usually runs in the background, without kwin & the konqueror instance controlling the desktop icons and middle/right-click menus.
When I am in FVWM, I can use all installed KDE programs without problem (they even make use of stalontray as a replacement for the KDE systray), KDE on-demand-services (like KWallet) are started automatically when a program needs them, but I have no idea how to automatically start the KDE services, which normally get started when KDE starts (like kmilo). In case of kmilo, I can start it manually using the KDE control center, but of course I don't want to do that every time after I start FVWM.
Just replacing kwin with FVWM using "export KDEWM" did not work, it got pretty much messed up with a mix of FVWM & KDE (which maybe could have been fixed by killing some KDE processes, but I didn't try, because it didn't seem the be the best approach).
Anybody any idea? Anybody knows the command, how to start all the KDE services, which usually get started when KDE starts?

That's the strange thing, kdeinit doesn't do it, I already tried before (by just starting it after FVWM has come up), and I tested it again by adding it to .xinitrc:
$ cat .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
kdeinit &
exec fvwm
But all it does, is the following:
4478 ? Ss 0:00 kdeinit Running...
4484 ? S 0:00 \_ klauncher [kdeinit]
4482 ? S 0:00 dcopserver [kdeinit] --nosid
4493 ? S 0:00 kded [kdeinit]
Looking into the KDE Control Center shows, that only 1 out of 11 services, which should have been started on KDE start, is actually running.
kdeinit may be the way to go, but there is still something missing. But what?

My ipod touch is using location services of china and does not show the place where i am living in india.

when i use location services through wi-fi my ipod doesnt show my exact location and uses china as default location , so i am encountering problems while yousing apps like watsapp or wechat etc. plz give me a solution

For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. or finds one that has it location as China. Apple continuously updated their database based on info they obtain from iPhones. However, I do not know if that applies to India. No one has been able to find a way to inform Apple of a router or correct is location.

I cant Use my iphone without charging and it shows 100%

I cant use it without charging wire and it shows 100%

Hello, Malik Rasib.
Thank you for visiting Apple Support Communities.
Here are some helpful troubleshooting steps to go through when experiencing this issue.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

HT204085 How can i use iCloud service without providing credit card information on my iphone

Sir I have no crdit card I want to use iCloud and iTunes service please help me

http://support.apple.com/kb/ht2534

Is it possible for another Mac to view my own, i.e watch what I do while using the computer, without interfering and using it themselves?

Nothing serious, I just wondered whether other people in my household could view my computer as I use it without me knowing?

Hey mate.
Yeah, there are plenty of programs out there that can do this, in corporate environments, you can understand how this kind of thing might be handy (watching employees etc).
Applications like JollysFastVNC or Chicken of the VNC, or even the in-built Screen Sharing option in the Finder (so long as the computer that is being watched has 'Screen Sharing' enabled in the System Preferences > Sharing menu.
However, in most cases, if you go to Remote Management > Computer Settings > and tick "Show Remote Management icon in the task bar" - This will basically show a pair of Binoculars when no one is watching your screen, and it will show binoculars inside a screen when someone is watching you, handy for those aforementioned employees (hehe ;D)
Hope this helps mate!
Regards,
Zet.
<Edited by Host>

Connecting Using SSL Authentication Without Username and Password

Hi,
We're on RedHat Linux 4.0 using 10.2.0.3 (server/client). We're trying to figure out a way to connect to the database using instantclient and JDBC-OCI and SSL authentication without using a username or password. According to the documentation this should be possible but no sample code is given.
LD_LIBRARY_PATH is set /opt/app/oracle/product/10.2.0/db_1/lib:/usr/lib:/home/oracle/instantclient where the instantclient was installed from the 10.2.0.1 client software
and we are using JDK version 1.6.0_03.
We're also referencing the following paper:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/pdf/wp-oracle-jdbc_thin_ssl_2007.pdf
We've got our client and server wallets configured and the sample code we tried looks like this:
import java.sql.*;
import java.sql.*;
import java.io.*;
import java.util.*;
import oracle.net.ns.*;
import oracle.net.ano.*;
import oracle.jdbc.*;
import oracle.jdbc.pool.*;
import java.security.*;
import oracle.jdbc.pool.OracleDataSource;
public static void main(String[] argv) throws Exception {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Security.addProvider(new oracle.security.pki.OraclePKIProvider());
System.setProperty("oracle.net.tns_admin", "/opt/app/oracle/product/10.2.0/db_1/network/admin");
String url = "jdbc:oracle:thin:@orcl";
java.util.Properties props = new java.util.Properties();
props.setProperty("oracle.net.authentication_services","(TCPS)");
props.setProperty("javax.net.ssl.trustStore",
"/opt/app/oracle/product/10.2.0/db_1/admin/wallet/server/cwallet.sso");
props.setProperty("javax.net.ssl.trustStoreType","SSO");
props.setProperty("javax.net.ssl.keyStore", "/opt/app/oracle/product/10.2.0/db_1/admin/wallet/client/cwallet.sso");
props.setProperty("javax.net.ssl.keyStoreType","SSO");
props.put ("oracle.net.ssl_version","3.0");
props.put ("oracle.net.wallet_location", "(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=/opt/app/oracle/product/10.2.0/db_1/admin/wallet/client)))");
System.out.println("At Here...");
OracleDataSource ods = new OracleDataSource();
//ods.setUser("scott");
//ods.setPassword("tiger");
ods.setURL(url);
ods.setConnectionProperties(props);
System.out.println("At Here1...");
Connection conn = ods.getConnection();
System.out.println("At Here2...");
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("select 'Hello Thin driver SSL "
+ "tester ' from dual");
while (rset.next())
System.out.println(rset.getString(1));
rset.close();
stmt.close();
conn.close();
When this code is compiled and run, the following error is thrown:
Exception in thread "main" java.sql.SQLException: invalid arguments in call
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
If a username and password is supplied, the code works. So does anyone have a working of using SSL to authenticate without supplying username/password?
Thanks
mohammed

Hi,
I just solved this. I noticed from another thread that I was not using the OCI driver (see below):
String url = "jdbc:oracle:thin:@pki14";
Once I changed it to:
String url = "jdbc:oracle:oci:@pki14";
The code worked perfectly. One more setting that you'll have to do is to create the user you want to connect as externally:
create user scott identified externally as
'CN=acme, OU=development, O=acme, C=US';
grant connect,create session to scott;
Note that the DN should be the same as the SSL certificate that you created in your wallet.
hth
mohammed

Devloping graphs using pure java without applets and swings

Hi Guys
i want to devlop bar graphs,pie charts,line graphs using pure java.i don't want to use applets and swings..does any body help on this asap..
IT'S VERY URGENT
cheers
ANAND

Go to
http://java.sun.com/docs/books/tutorial/information/download.html#OLDui
and get: Creating a User Interface (AWT Only) Archive (tut-OLDui.zip)

HT204053 I am reluctant to give my visa details as there was large scale misuse recently. how can i use free services without giving my visa details

I am reluctant to disclose my visa details due to recent largescae misuse of data. How can I use App store to down load viber and whatts app which are free?

Buy and redeem a small cash amount iTunes Gift Card.

Use of Services without SR and ESR

Similar Messages

Maybe you are looking for