User defined F4 help on a table control field

hi
i m calling table maintenance view on click of a button on module pool screen . i have 1 column internal table which has the contents of help to be displayed on 1 of the fields in table control . how to code and where?
i m using CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
for user defined F4 help . but where exactly to code i dont knw.please help.
thank you.
Ajantha.

Hi,
Inthe Module Pool Program, By Default the PROCESS BEFORE OUTPUT and PROCESS AFTER INPUT, at the same way we need to write the POV ...
As same as we need to write the POV enent manuvally, what you writen the Event will be work in the Report but that does not work in the Module pool Program you need to write PROCESS ON VALUE REQUEST
write as PROCESS ON VALUE REQUEST then under this write the Function module to call the F4 for that field
The Code should be like
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>. --> " Double click it and write the Function module for this then the F4 help will come for this Field
Look at the below link
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
Regards
Sudheer

Similar Messages

Adding F4 help in a table control field

Hi,
I Have a table control with records, i want to add an F4 functionality in one field. When you press f4 i want to bring a pop up screen for that field...please help

Hi
Hope it will help you.
Reward if help.
Check the below link.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
 NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
 i1 TYPE i,
 lifnr LIKE rf02k-lifnr,
 bukrs LIKE rf02k-bukrs,
 ekorg LIKE rf02k-ekorg,
 ktokk LIKE rf02k-ktokk,
 anred LIKE lfa1-anred,
 name1 LIKE lfa1-name1,
 sortl LIKE lfa1-sortl,
 land1 LIKE lfa1-land1,
 akont LIKE lfb1-akont,
 fdgrv LIKE lfb1-fdgrv,
 waers LIKE lfm1-waers,
 END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
 j1 TYPE i,
 banks LIKE lfbk-banks,
 bankl LIKE lfbk-bankl,
 bankn LIKE lfbk-bankn,
 END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = 'C:\first1.txt'
 filetype = 'DAT'
 TABLES
 data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = 'C:\second.txt'
 filetype = 'DAT'
 TABLES
 data_tab = jtab.
LOOP AT itab.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-KTOKK'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RF02K-LIFNR'
 itab-lifnr.
 PERFORM bdc_field USING 'RF02K-BUKRS'
 itab-bukrs.
 PERFORM bdc_field USING 'RF02K-EKORG'
 itab-ekorg.
 PERFORM bdc_field USING 'RF02K-KTOKK'
 itab-ktokk.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-LAND1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFA1-ANRED'
 itab-anred.
 PERFORM bdc_field USING 'LFA1-NAME1'
 itab-name1.
 PERFORM bdc_field USING 'LFA1-SORTL'
 itab-sortl.
 PERFORM bdc_field USING 'LFA1-LAND1'
 itab-land1.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-KUNNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKN(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 cnt = 0.
 LOOP AT jtab WHERE j1 = itab-i1.
 cnt = cnt + 1.
 CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-banks.
 CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-bankl.
 CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
 PERFORM bdc_field USING fdt jtab-bankn.
 IF cnt = 5.
 cnt = 0.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=P+'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKN(02)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 ENDIF.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-FDGRV'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFB1-AKONT'
 itab-akont.
 PERFORM bdc_field USING 'LFB1-FDGRV'
 itab-fdgrv.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-ZTERM'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB5-MAHNA'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFM1-WAERS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFM1-WAERS'
 itab-waers.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-LIFNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
REPORT zmm_pr_upload_mat
 NO STANDARD PAGE HEADING
 LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
 sno(3), " SNo
 bsart(004), " PR Type
 epstp(001), " Item Category
 knttp(001), " Account Assignment
 eeind(010), " Delivery Date
 lpein(001), " Category of Del Date
 werks(004), " Plant
 lgort(004), " Storage Location
 ekgrp(003), " Purchasing Group
 matkl(009), " Material Group
 bednr(010), " Tracking No
 afnam(012), " Requisitioner
Item Details
 matnr(018), " Material No
 menge(017), " Quantity
 badat(010),
 frgdt(010),
 preis(014), " Valuation Price
 waers(005), " Currency
 peinh(005),
 wepos(001),
 repos(001),
 sakto(010), " GL Account
 kostl(010), " Cost Center
 bnfpo(005),
 END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
 sno(3), " SNo
 bsart(004), " PR Type
 epstp(001), " Item Category
 knttp(001), " Account Assignment
 eeind(010), " Delivery Date
 werks(004), " Plant
 lgort(004), " Storage Location
 ekgrp(003), " Purchasing Group
 matkl(009), " Material Group
 bednr(010), " Tracking No
 afnam(012), " Requisitioner
 END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
 sno(3), " SNo
 matnr(018), " Material No
 menge(017), " Quantity
 preis(014), " Valuation Price
 sakto(010), " GL Account
 kostl(010), " Cost Center
 END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
 v_rowno(5), " Row No
 v_2(2), " Counter
 v_rows LIKE sy-srows, " Rows in TC
 v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
 dynpro_number = syst-dynnr
 IMPORTING
 file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
 EXPORTING
 filename = p_file
 filetype = 'DAT'
 TABLES
 data_tab = i_pr
 EXCEPTIONS
 conversion_error = 1
 invalid_table_width = 2
 invalid_type = 3
 no_batch = 4
 unknown_error = 5
 gui_refuse_filetransfer = 6
 OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
 MOVE-CORRESPONDING i_pr TO it_item.
 APPEND it_item.
 CLEAR it_item.
 AT END OF sno.
 READ TABLE i_pr INDEX sy-tabix.
 MOVE-CORRESPONDING i_pr TO it_header.
 APPEND it_header.
 CLEAR it_header.
 ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
 PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBAN-BEDNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'EBAN-BSART'
 it_header-bsart.
 PERFORM bdc_field USING 'RM06B-EPSTP'
 it_header-epstp.
 PERFORM bdc_field USING 'EBAN-KNTTP'
 it_header-knttp.
 PERFORM bdc_field USING 'RM06B-EEIND'
 it_header-eeind.
 PERFORM bdc_field USING 'RM06B-LPEIN'
 it_header-lpein.
 PERFORM bdc_field USING 'EBAN-WERKS'
 it_header-werks.
 PERFORM bdc_field USING 'EBAN-LGORT'
 it_header-lgort.
 PERFORM bdc_field USING 'EBAN-EKGRP'
 it_header-ekgrp.
 PERFORM bdc_field USING 'EBAN-MATKL'
 it_header-matkl.
 PERFORM bdc_field USING 'EBAN-BEDNR'
 it_header-bednr.
 PERFORM bdc_field USING 'EBAN-AFNAM'
 it_header-afnam.
Item Details
 v_l = 0.
To add no. of rows
 v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
 v_rowno = 130 .
 LOOP AT it_item WHERE sno = it_header-sno.
 v_l = v_l + 1.
 IF v_l = 14 .
 IF v_2 = 12 .
 v_2 = 12 .
 v_l = 2 .
From second time onwards it is displaying 12 rows only
 v_rowno = v_rowno + 120 .
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'RM06B-BNFPO'
 v_rowno.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 ELSE.
V_2 initialized to 12 for second screen purpose
 v_2 = 12 .
 v_l = 2 .
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'RM06B-BNFPO'
 v_rowno .
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 ENDIF.
 ENDIF.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 CLEAR v_field.
 CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
 PERFORM bdc_field USING v_field it_item-matnr.
 CLEAR v_field.
 CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
 PERFORM bdc_field USING v_field it_item-menge.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBAN-PREIS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'EBAN-PREIS'
 it_item-preis.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'EBKN-SAKTO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'EBKN-SAKTO'
 it_item-sakto.
Cost Center
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-KOSTL'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-KOSTL'
 it_item-kostl.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RM06B-BNFPO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
Call The Transaction
 PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.

How to add user defined F4 help for s LDB field?

Hi,
I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
Mahesh

Hi Mahesh,
I don't think so that you can attach a User defined F4 help in a standard LDB.
What I would suggest is that you copy the standard LDB into Z LDB from SE80.
Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
And add the same field in the selection screen of the report and define the F4 help.
Do not forget to attach the Z LDB to your report by going to the Attributes.
Please refer to the code below for attaching a generic F4 help to a select options:
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Could you help me about table control .. ?

Dear All,
I've a problem in table Control.
I put table control inside tab control (there are many tab in one screen where one tab has one table control).
The schenario of the program, i wanna use table control to maintain the value from some table.
So certainly it has insert/add, delete function.
As we know to do one function in those e.g. add record button, we need specify some code on that button.
So ..
Once when that button is pressed, we can check what button is being pressed using that code.
And it can run well.
But this is the strange one, if i have schenario like this :
1. I click add record button
    I will get the add code through ok_code/SY-UCOMM variable.
2. I scroll down/up the table control.
    (THIS IS THE WEIRD), the ok_code/SY-UCOMM variable still keep having add code. So every we scroll down/up, application also will add one record.
Could you help me to make ok_code/SY-UCOMM blank in every time i scroll down/up the table control ??
Or could you help me how to i specify the code for scroll down/up the table control so I can identify when user is scrolling down/up the table control??
I really need your guidance/suggestion how to overcome it .. ?
Many tks for all your attention.
Best regards,
Daniel N.

Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
       DUMMY(100) TYPE C,
       END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
       LIFNR(10) TYPE C,
       BUKRS(4) TYPE C,
       EKORG(4) TYPE C,
       KTOKK(4) TYPE C,
       NAME1(30) TYPE C,
       SORTL(10) TYPE C,
       LAND1(3) TYPE C,
       SPRAS(2) TYPE C,
       AKONT(6) TYPE C,
       FDGRV(2) TYPE C,
       WAERS(3) TYPE C,
       END OF IT_XK01,
       BEGIN OF IT_BANK OCCURS 0,
       BANKS(3) TYPE C,
       BANKL(10) TYPE C,
       BANKN(10) TYPE C,
       KOINH(30) TYPE C,
       LIFNR(10) TYPE C,
       END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = 'C:\VENDOR.TXT'
   FILETYPE                      = 'ASC'
TABLES
   DATA_TAB                      = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
    APPEND IT_XK01.
ELSE.
    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
    APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              IT_XK01-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELX1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              IT_XK01-SORTL.
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_field       using 'LFA1-SPRAS'
                              IT_XK01-SPRAS.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'WYT3-PARVW(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
points plz (if this information is usefull).
Regard's
Raghunath.S

Add column to user defined type based on existing table

Hello guys,
I am trying to compile my function which returns a user defined type based on existing table. Throughout the initializing process though my query returns one additional column - SCORE(1). Here is my package:
create or replace
PACKAGE STAFF_AGENCY_PKG AS
TYPE TYPE_SEEKER_TABLE IS TABLE OF TOSS.SEEKER%ROWTYPE;
FUNCTION GET_SEEKERS(IN_KEYWORD IN VARCHAR2)
RETURN TYPE_SEEKER_TABLE PIPELINED;
END STAFF_AGENCY_PKG;
create or replace
PACKAGE BODY STAFF_AGENCY_PKG
AS
FUNCTION GET_SEEKERS(IN_KEYWORD IN VARCHAR2)
RETURN TYPE_SEEKER_TABLE PIPELINED
IS
R_TBL TYPE_SEEKER_TABLE; -- to be returned
BEGIN
FOR R IN(
SELECT Seeker.SEEKER_ID,
Seeker.FIRSTNAME,
Seeker.LASTNAME,
Seeker.NATIONALITY,
Seeker.ISELIGIBLE,
Seeker.BIRTHDATE,
Seeker.ISRECIEVEEMAILS,
Seeker.HIGHESTDEGREE,
Seeker.ETHNICITY,
Seeker.GENDER,
Seeker.ISDISABILITY,
Seeker.DISABILITY,
Seeker.CV,
Seeker.PASSWORD,
Seeker.PREFFERED_CITY,
SEEKER.EMAIL,
SEEKER.JOB_PREFERENCES_ID,
SCORE(1)
FROM SEEKER Seeker
WHERE CONTAINS(CV, '<query>
<textquery lang="ENGLISH" grammar="context">' ||
GET_RELATED_CATEGORIES(IN_KEYWORD) ||
'</textquery>
<score datatype="INTEGER"/>
</query>', 1) > 0
LOOP
PIPE ROW(R); --Error(38,10): PLS-00382: expression is of wrong type
END LOOP;
RETURN;
END GET_SEEKERS;
END STAFF_AGENCY_PKG;
How do I need to amend my user type in order to suffice?
Oracle Release 11.2.0.1.0
Many thanks in advance!

>
How do I need to amend my user type in order to suffice?
>
You will need to create two new TYPEs. One that has all of the columns of the TOSS.SEEKER table and the new SCORE column and then a TYPE that is a table of the first type.
See the Example 12-22 Using a Pipelined Table Function For a Transformation in the PL/SQl language reference
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/tuning.htm#i53120
Here is the first part
-- Define the ref cursor types and function
CREATE OR REPLACE PACKAGE refcur_pkg IS
TYPE refcur_t IS REF CURSOR RETURN employees%ROWTYPE;
TYPE outrec_typ IS RECORD (
 var_num NUMBER(6),
 var_char1 VARCHAR2(30),
 var_char2 VARCHAR2(30));
TYPE outrecset IS TABLE OF outrec_typ;
FUNCTION f_trans(p refcur_t)
 RETURN outrecset PIPELINED;
END refcur_pkg;
CREATE OR REPLACE PACKAGE BODY refcur_pkg IS
FUNCTION f_trans(p refcur_t)
 RETURN outrecset PIPELINED IS
 out_rec outrec_typ;
 in_rec p%ROWTYPE;
BEGINModify
TYPE outrec_typ IS RECORD (
 var_num NUMBER(6),
 var_char1 VARCHAR2(30),
 var_char2 VARCHAR2(30));
TYPE outrecset IS TABLE OF outrec_typ;to include all of the columns you need. Unfortunately you will have to manually list all of the columns of the TOSS.SEEKER table. If you expect to need this same structure in other places you should create them as SQL types instead of PL/SQL types.
This example should be enough to show you how to change your code to do something similar.

How to attach a search help in a table control coloumn based on the search

Hi,
Can anyone help me for attaching a search help in a table control coloumn based on the search help value of another coloumn
in the same table control.
Regards,
Ratheesh BS

check
Re: Switch Search Help during runtime

User-defined value help and dispatcher configuration

HI all.
This is adrian. I gots my hands in PCUI. Facing a prob. Hope someone can help.
The User-defined value help and dispatcher iViews in CRM-PCUI are no longer displayed after I installed CRM 4.0 Support Package 03. I also get a portal error when I execute the link.
Did some one work with such a prob.
Acosta.

Adrian,
I did work with a lil of PCUI some time back.
Well the upfront easy solution is upgrade your pack level to one less than the latest.
Julius

How to create a user defined type base on existing table

Hi Everyone,
Are there any way to create a user defined type base on existing table us as :
CREATE OR REPLACE Type MyTable Is Table Of PART%ROWTYPE;
where Part is a table.
Regards,
JDang

Hi JDAng,
Can't be done. %ROWTYPE is a PL/SQL construct, and as such cannot be used in SQL.
Regards
Peter

Search help on table control field which imports info from same record

Hi Team ABAP,
i got a slight problem here and kinda dont know how to proceed.
I got a DDIC structure containing fields KSCHL and NACHA.
Additionally i got a customizing table based on kschl, where allowed NACHA´s per KSCHL get customized.
Now i got a table control, containing records of type of above described structure.
I created a search help for Field NACHA which actually uses KSCHL as importing since we just want to see those NACHA´s allowed for the given KSCHL.
Search help itself works fine. I got problems in how to tell it which kschl to import.
I have coded an routine in event PROCESSES ON VALUE REQUEST.
There i could do DYNP_VALUES_READ or get my data right out of the itab on which the table control is based. i just got the problem that i dont have a clue how identify which search help of which table control line got clicked.
having a first look i dont see any of SY fields changing using different lines. So i´m stuck. any Ideas?
regards
Edited by: Florian Kemmer on Nov 30, 2010 9:01 AM
Edited by: Florian Kemmer on Nov 30, 2010 9:01 AM

Use FM [DYNP_GET_STEPL|http://www.sdn.sap.com/irj/scn/advancedsearch?query=dynp_get_stepl] "Current sy-stepl at Event POV", then use the returned povstepl value in DYNP_VALUES_READ (and DYNP_VALUES_UPDATE if required)
Regards,
Raymond

How do i display input values (POV) for a table control field

Hi guyz !
How do i display input values (POV) for a field in table control,
i mean when user presses F4 on a table control field.
Please help.
Thanks
jahan

PROCESS ON VALUE-REQUEST( F4 ) statement
Code to demonstrate how to perform a manual value help(F4) on a particular field using the PROCESS ON VALUE-REQUEST statement and how to return values back to a table control on the screen. For standard screen fields simply move the value to the appropriate screen field name.
* Screen flow logic........
PROCESS BEFORE OUTPUT.
*MODULE PBO_MODULE.
PROCESS AFTER INPUT.
*MODULE PAI_MODULE.
PROCESS ON VALUE-REQUEST. "F4
FIELD EKPO-EBELP MODULE help_ekpo.
MODULE help_ekpo INPUT.
**Transport values to table dynpro/screen table control
DATA: l_stepl LIKE sy-stepl,
        l_indx LIKE sy-stepl.
DATA: dynpfields        LIKE dynpread OCCURS 5 WITH HEADER LINE.
* Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
    IMPORTING
      povstepl        = l_stepl
    EXCEPTIONS
      stepl_not_found = 0
      OTHERS          = 0.
l_indx = tc_ekpotable-top_line + l_stepl - 1.
          "tc_ekpotable should already have been declared
REFRESH dynpfields.
CLEAR   dynpfields.
dynpfields-fieldname = 'EKPO-EBELN'.
dynpfields-fieldvalue = '00010'   "wa_ekpo-ebeln.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'EKPO-EBELP'.
dynpfields-fieldvalue = '00020'   "wa_ekpo-ebelp.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = 'SAPLZZ_EKKO'    "Program name
      dynumb     = '0100'           "Screen number
    TABLES
      dynpfields = dynpfields
    EXCEPTIONS
      OTHERS     = 0.
ENDMODULE.                 " help_ekpo INPUT
reward points if it is usefull ..
Girish

Set cursor in table control field

I have developed module using table control have done validation for one field on Enter key press.In change mode if user changes value in table control field and presses Enter key then system is showing Error message on status bar and table control gets gray out.
if user again hits Enter key then this error message clears and Table control is in Edit mode.
Here I wan that Cursor should go to same filed from which error message occurred.
I have written Get Cursor In PAI event and Set Cursor in PBO after Loop at table control. I tried Set cursor within Lop at Table control in PBO.
But cursor is not coming on that field of table control.
I have written set cursor as below:
Set Cursor Field itab-fieldname Line lineno Offset offsetval.
Here itab is internal table assigned to table control.
Please let me know why cursor is not setting on particular field on table control.

Hi Ganesh,
   A simpler way would be to include the fields of the table in a chain-endchain block.
in PAI section.
PROCESS AFTER INPUT.
loop at IT_FINAL.
    chain.
      field WA_FINAL-JOBCARD.
      field WA_FINAL-MATIDTAG.
      field WA_FINAL-VORNR.
      field WA_FINAL-ARBPL.
      field WA_FINAL-ZZPULLCONTNRQTY.
      field WA_FINAL-NOOFTAGS.
      field WA_FINAL-ROUTE_TO.
   module validate.
    endchain.
endloop.
you can issue your error messages in the module validate.
REgards,
Ravi

Disable / enable table control field at runtime

hi ,
i am working on a custom transaction in which i have a table control...depending on a table value i have to disable an input field inside the table control...
i know in a normal field we use
loop at screen.
if screen- name = 'XXX' or screen-group = 'XXX'
screen-output = 0.
endif.
but inside a table control field how to modify it.
Regards
Harish Ramakrishnan

All you need to do is put some code in a module of your PBO. This will change the cell attribute of a single row.
PROCESS BEFORE OUTPUT.
* PBO FLOW LOGIC FOR TABLECONTROL 'I_INTRCON'
* MODULE I_INTRCON_CHANGE_TC_ATTR.
* MODULE I_INTRCON_CHANGE_COL_ATTR.
LOOP AT I_INTR
 WITH CONTROL I_INTRCON
 CURSOR I_INTRCON-CURRENT_LINE.
 MODULE I_INTRCON_CHANGE_FIELD_ATTR.
ENDLOOP.
MODULE SET_CURSOR_FIELD.
MODULE STATUS_0200.
module i_intrcon_change_field_attr output.
modify i_intr index i_intrcon-current_line.
if i_intr-check = 'X'.
 loop at screen.
 if screen-name = 'I_INTR-RCVQTY'.
 screen-input = '1'.
 endif.
 modify screen.
 endloop.
endif.
endmodule.
Regards,
RIch Heilman

Coding for giving 'find' functionality to a table control field

hi.
i want to give find functionality to a table control field.when ever i will select one field & i will enter 'find' icon one modal screen comes.when i will enter one value of that field it will highlight that field in the table control.

Hi,
FIND IN [SECTION OFFSET <off> LENGTH <len> OF] <text>
 [IGNORING CASE|RESPECTING CASE]
 [IN BYTE MODE|IN CHARACTER MODE]
 [MATCH OFFSET <o>] [MATCH LENGTH <l>].
The system searches the field <text> for the pattern . The SECTION OFFSET <off> LENGTH <len> OF addition tells the system to search only from the <off> position in the length <len>. IGNORING CASE or RESPECTING CASE (default) specifies whether the search is to be case-sensitive. In Unicode programs, you must specify whether the statement is a character or byte operation, using the IN BYTE MODE or IN CHARACTER MODE (default) additions. The MATCH OFFSET and MATCH LENGTH additions set the offset of the first occurrence and length of the search string in the fields and <l>.
Regards,
Priya.

External tables with user defined fuction help

Can any one help me
I have problem with using user defined function while creating the External table.
The user defined function Just takes an input empno and returns one number.
CREATE TABLE EMPXT_1(empno NUMBER(4)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY TEST_DIR
ACCESS PARAMETERS(
RECORDS FIXED 4
STRING SIZES ARE IN BYTES
NOBADFILE
NODISCARDFILE
LOGFILE '211205.KNU.LOG'
FIELDS
NOTRIM
(empno POSITION(1) integer external(4) p_1(:empno)
LOCATION
('empxt_1.dat')
REJECT LIMIT UNLIMITED
NOPARALLEL
content of expxt_1.dat
7849
SELECT * from EMPXT_1;
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "double-quoted-string": expecting one of:
"comma, defaultif, nullif, optionally, ), terminated"
KUP-01007: at line 8 column 49
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1

hi,
may be u have do these
for ORA-29913 error
1. you have to grant read and write to a directory.
for other errors do check this document
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96525/kupus.htm
hope this may help u
Trinath Somanchi

Using user-defined transport recording routine with table maintenance view?

Hi,
I have a table that is maintained through a maintenance view. I need to record the changes to a dedicated transport object (not TABU) with my own recording routine instead of teh standard recording routine.Could someone tell me which/how the events can be used to achieve this?
Regards
Rachana

Hi Rajeev,
I have changed TMG to choose the option - User defined routine. And I have created a new transport object in SOBJ for the table. Is this enough to record the object to the transport as the object i defined instead of TABU? Do I need to write some subroutine for any view event to achieve this? Do you mean to use the menu option to include the object to a request?
I have a bigger problem where this view is actually part of a view cluster. Even in that case is teh above steps enough?
Regards
Rachana

User defined F4 help on a table control field

Similar Messages

Maybe you are looking for