User exit/BADI required to assign a pushbutton from transactionVA01 to IW51

Hello experts,
I have a requirement wherein the "Create Customer " pushbutton from VA01 Transaction has to be assigned to Tcode: IW51 .
Our aim is to assign this "Create customer" button in IW51 screen instead of VA01 .
Here are the details of the Module pool program.
Standard SAP program: SAPMV45A
Screen: 4701
Button name: BT_IAAN
Is there a standard User Exit/Function exit present for this?
Please provide a reply at the earliest convenience.
Thanks,
Himanshu Limaye

Himanshu Limaye,
As far as I know you cannot add a button the the GUI menu without modifying the system..
However there are user-exits available for menu Goto->Enhancements...
Have a look [here|http://pjatkin.users.btopenworld.com/documents/PMCSUserExits.pdf] for the user-exits under the Notification section.
Otherwise its back to the actionbox/QQMA0001 option described above
PeteA

Similar Messages

PA30 : IT2010 & IT 0015. User exit / BADI required to retrieve BETRG value

good day to everyone,
My objective its to retrieve Amount ( BETRG) value in PA30 --> IT2010 and PA30 --> IT0015 screen.
I have tried using the User exits and Badi below. However, there are no structure to retrieve BETRG value when i am i at the IT2010 and IT0015 screen.
-EXIT_SAPFP50M_001 in enhancement PBAS0001
-badi HRPAD00INFTY
Could anyone let me know is there any way to retrieve the BETRG value or any user exit/badi available?
hope to hear from you soon.
Thank you.
Regards,
SW

In PAI of user exit ( ZXPADU02 ) you can get it easily
data i0015 like p0015.
    if INNNN-INFTY = '0015'.
         call method CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
          exporting
            PRELP = INNNN
          importing
            PNNNN = I0015. "here you have record of IT0015 so BETRG is also available
      "cast back values to screen fields
        call method CL_HR_PNNNN_TYPE_CAST=>PNNNN_TO_PRELP
          exporting
            PNNNN = I0015
          importing
            PRELP = INNNN.
     endif.
Similar code can be done for IT2010
Regards
Marcin

User exit/BADI required for coding for the selection custom fields in RSA3

Hi,
I have a requirement in the Datasource extractor. I need to add custom Z fields in the Data souce of the 2LIS_02_SCL and need to include in the selection part. So I have added the custom filed in the append structure and include the check in the selection checkbox in the transaction LBWE under the datasource specified above. For the corresponding custom fields, to be populated in the ALV list, I have written the code in corresponding user exit ZXRSAU01.
Now I can view my custom Z fields in the list as well as on the selection fileds while executing the transaction RSA3. But I need to write code for the selection criteria part. On entering value in the selection criteria of my custom z field, no values are selected to the corresponding query. Please let me know where should i write the coding part for the selection criteria of the Z fields for the Datasource.
On debugging, to my understanding only the standard fields are alone getting filtered by providnig the values in the selection part of the RSA3 tcode. It is called in Macros : Sel < Datasorce> .... and the fetch cursor is included inside the macros.
Please let me know any user exits or Badi;s available for it.
Thanks in advance

Hi shivu,
you might try the BAdI RSU5_SAPI_BADI. A good introduction can be found in the following document:
[Enhancing DataSources with BAdI RSU5_SAPI_BADI|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7]
The BAdI is called at the time of extraction, so this would be the right place to populate your additional fields.
Best,
Chris

User exit / Badi for Account Assigned Sales Order billing

We are planning to collect the royalty in the condition type.We want to accumulate the condition in the Internal Order.After certain period we want to close the orders .Can any one suggest the Userexit / Badi for this type of Billing / Pricing
Thanks
Jeevan

Hello,
please have a look in the customizing transaction SPRO:
> SPRO
    > Sales and Distribution
       > System Modifications
          > User Exits
Here you can find the documentation of all Userexits for SD.
I hope that the information are helpful.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points

User Exit/Badi for G/L account assignment in ME21n/ME22n

Hi All,
I need user exit/badi for account assignment in item details for following requirement.
If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
Please suggest me suitable user exit for this.

hello,
follow the steps.......
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u,
santhosh

Need user exit/BADi

Hi All,
I have following requirement for USER EXIT/BADI:-
Requirement : If some material number is entered in Transaction ME11 /ME12 , I have to find a user exit/BADI where I will find material group from mara based on EINA-MATNR = MARA-MATNR if that group is within some specific group like CHEM ,POLY,OIL etc. , user will not be allowed to go to next screen and it will show message to user on the first screen itself..
If any one has come across such requirement please help me on this asap.
Thanks.
Lokesh

Hi Lokesh,
i am sending one program using which you can check for the user exits and Badi's used in the respective transaction.
It will surely resolve your issue.
Use the following prog. it will fetch the Exits as well as BADI's for that T Code.
*& Report Z_USEREXIT_DISPLAY
REPORT Z_USEREXIT_DISPLAY
NO STANDARD PAGE HEADING
LINE-SIZE 200 MESSAGE-ID ZZ.
T A B L E D E C L A R A T I O N S *
TABLES: TFTIT,
E071,
E070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF X_TSTC,
TCODE TYPE TCODE,
PGMNA TYPE PROGRAM_ID,
END OF X_TSTC.
TYPES: BEGIN OF X_TADIR,
OBJ_NAME TYPE SOBJ_NAME,
DEVCLASS TYPE DEVCLASS,
END OF X_TADIR.
TYPES: BEGIN OF X_SLOG,
OBJ_NAME TYPE SOBJ_NAME,
END OF X_SLOG.
TYPES: BEGIN OF X_FINAL,
NAME TYPE SMODNAME,
MEMBER TYPE MODMEMBER,
INCLUDE(15), "Include name
END OF X_FINAL.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: IT_TSTC TYPE STANDARD TABLE OF X_TSTC WITH HEADER LINE.
DATA: IT_TADIR TYPE STANDARD TABLE OF X_TADIR WITH HEADER LINE.
DATA: IT_JTAB TYPE STANDARD TABLE OF X_SLOG WITH HEADER LINE.
DATA: IT_FINAL TYPE STANDARD TABLE OF X_FINAL WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK BLK01 WITH FRAME TITLE TEXT-T01.
PARAMETERS: P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BLK01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM GET_TCODES. "Get Tcodes
PERFORM GET_OBJECTS. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM DISPLAY_RESULTS. "Display Results
*& Form get_tcodes
Get Tcodes
FORM GET_TCODES.
SELECT TCODE
PGMNA
INTO TABLE IT_TSTC
FROM TSTC
WHERE TCODE = P_TCODE.
IF SY-SUBRC = 0.
SORT IT_TSTC BY TCODE.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM GET_OBJECTS.
DATA: L_FNAME LIKE RS38L-NAME,
L_GROUP LIKE RS38L-AREA,
L_INCLUDE LIKE RS38L-INCLUDE,
L_NAMESPACE LIKE RS38L-NAMESPACE,
L_STR_AREA LIKE RS38L-STR_AREA.
DATA: V_INCLUDE LIKE RODIOBJ-IOBJNM.
DATA: E_T_INCLUDE TYPE STANDARD TABLE OF ABAPSOURCE WITH HEADER
LINE.
DATA: L_LINE TYPE STRING,
L_TABIX LIKE SY-TABIX.
IF NOT IT_TSTC[] IS INITIAL.
SELECT OBJ_NAME
DEVCLASS
INTO TABLE IT_TADIR
FROM TADIR FOR ALL ENTRIES IN IT_TSTC
WHERE PGMID = 'R3TR' AND
OBJECT = 'PROG' AND
OBJ_NAME = IT_TSTC-PGMNA.
IF SY-SUBRC = 0.
SORT IT_TADIR BY OBJ_NAME DEVCLASS.
SELECT OBJ_NAME
INTO TABLE IT_JTAB
FROM TADIR FOR ALL ENTRIES IN IT_TADIR
WHERE PGMID = 'R3TR' AND
OBJECT = 'SMOD' AND
DEVCLASS = IT_TADIR-DEVCLASS.
IF SY-SUBRC = 0.
SORT IT_JTAB BY OBJ_NAME.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT IT_JTAB.
SELECT NAME
MEMBER
INTO (IT_FINAL-NAME, IT_FINAL-MEMBER)
FROM MODSAP
WHERE NAME = IT_JTAB-OBJ_NAME AND
TYP = 'E'.
APPEND IT_FINAL.
CLEAR IT_FINAL.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT IT_FINAL.
L_TABIX = SY-TABIX.
CLEAR: L_FNAME,
L_GROUP,
L_INCLUDE,
L_NAMESPACE,
L_STR_AREA.
L_FNAME = IT_FINAL-MEMBER.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
FUNCNAME = L_FNAME
IMPORTING
GROUP = L_GROUP
INCLUDE = L_INCLUDE
NAMESPACE = L_NAMESPACE
STR_AREA = L_STR_AREA
EXCEPTIONS
FUNCTION_NOT_EXIST = 1
OTHERS = 2.
IF SY-SUBRC = 0.
IF NOT L_INCLUDE IS INITIAL.
*- Get Source code of include.
CLEAR: V_INCLUDE, E_T_INCLUDE, E_T_INCLUDE[].
V_INCLUDE = L_INCLUDE.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
I_INCLUDE = V_INCLUDE
TABLES
E_T_INCLUDE = E_T_INCLUDE.
IF SY-SUBRC = 0.
LOOP AT E_T_INCLUDE.
IF E_T_INCLUDE-LINE CS 'INCLUDE'.
CLEAR L_LINE.
L_LINE = E_T_INCLUDE-LINE.
CONDENSE L_LINE NO-GAPS.
TRANSLATE L_LINE USING '. '.
L_LINE = L_LINE+7(9).
IT_FINAL-INCLUDE = L_LINE.
MODIFY IT_FINAL INDEX L_TABIX TRANSPORTING INCLUDE.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM DISPLAY_RESULTS.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) SY-ULINE.
WRITE:/ SY-VLINE,
2(23) 'Extension Name',
24 SY-VLINE,
25(39) 'Exit Name',
64 SY-VLINE,
65(74) 'Description',
140 SY-VLINE,
141(9) 'Include',
150 SY-VLINE.
WRITE:/1(150) SY-ULINE.
FORMAT RESET.
SORT IT_FINAL BY NAME MEMBER.
LOOP AT IT_FINAL.
CLEAR TFTIT.
SELECT SINGLE STEXT
INTO TFTIT-STEXT
FROM TFTIT
WHERE SPRAS = 'EN' AND
FUNCNAME = IT_FINAL-MEMBER.
WRITE:/ SY-VLINE,
IT_FINAL-NAME COLOR COL_KEY, 24 SY-VLINE,
25 IT_FINAL-MEMBER, 64 SY-VLINE,
65 TFTIT-STEXT, 140 SY-VLINE,
141 IT_FINAL-INCLUDE, 150 SY-VLINE.
WRITE:/1(150) SY-ULINE.
ENDLOOP.
ENDFORM. " display_results
Hope this resolves your query.
Reward all the helpful answers.
Regards

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

I have following requirement for USER EXIT/BADI

If some material number is entered in Transaction ME11 /ME12 , I have to find a user exit/BADI where I will find material group from mara based on EINA-MATNR = MARA-MATNR if that group is within some specific group like CHEM ,POLY,OIL etc. , user will not be allowed to go to next screen and it will show message to user on the first screen itself..
If any one has come across such requirement please help me on this asap.
Thanks in advance
Sachin

Hi,
You can use the BADI : ME_PROCESS_PO_CUST and the method
PROCESS_ITEM and write the code.
it will work.
DATA : re_data TYPE mepoitem
*get the item data
CALL METHOD im_item->get_data
RECEIVING
re_data = re_data.
reward if useful
regards,
ANJI

User exit/ badi needed for planned order create/change,collective ATP check

Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

Dear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar

User exit/Badi in MIGO after save

hi all
I am trying to find a user-exit/BAdi in tcode MIGO.
This one should be called after saving the MIGO document.
Using this i want to put control over auto TO creation for some specific plants and storage locations.
Important thing is I am using version 4.6C.

Hi,
Please try the last one. This may suit.
For "Automatic TO creation (background processing)", the following user exits are available:
MWMTOAU1 Selection of requirements for automatic creation of orders.
MWMTOAU2 Reference number assignment.
MWMTOAU3 Selection of posting change notices for automatic creation of transfer orders.
Thanks and Regards
Guru

User exit -BADI for overriding Partner number in Purchase order output type

Hello All,
We have a requirement wherein the EDI message type will distribute the Idoc to the partner number determined in the output type of the purchase order. We are maintaining the condition record for a generic partner number in MN04 and we want this partner number with partner role SH from the condition record to be modified to the sales order sold to party partner number. We are using third party processing and hence sales order number can be fetched from account assignment (EKKN) table of the purchase order. Kindly do let me know the user exit /BADI that can be used for achieving this functionality.
Thanks in advance for your immediate response.
With regards,
Joseph Anand B

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

User exit/BADI in MIRO that would trigger invoice quantity block.

Hi,
Is there a way to enchance MIRO so that an invoice quantity block will be set automatically through user exit/BADI?
My requirement is that if an invoice is to be posted onto a PO line using an IO, the invoice needs to be processed onto the PO line up to the total of the PO line. And if the invoice goes above the PO line and there is still some budget on the IO, the invoice should get a quantity block.
Also, the quantity block should be set before posting the invoice.
Thanks.

Hi,
Exit Name           Description
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
Badi Name            Description
INVOICE_UPDATE       Business Add-In: Logistics Invoice Verification
INVOICE_UPDATE       Transfer Invoice Receipt to Records Management
INVOICE_UPDATE       Event manager communication from invoice processing
INVOICE_UPDATE       Rückantwort ins CRM aus der Lieferantenrechnung
INVOICE_UPDATE       Implementierung, um S1NVEXC zu übermitteln
INVOICE_UPDATE       Save FI Document Type for Principle of Prudence
INVOICE_UPDATE       Vendor Evaluation Based on Documents from IV
Check this badi's and user exits.
Hope this helps.
Regards,
Qamar.

USER-EXIT/BADI for "MIRA"

Hello Gurus,
My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
I will be really helpful as it is very urgent!!!!!
Thanks in advance

Hi,
these user exits avialable for Tcode MIRA...
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
regds,
paras

User exit / BADI for CO01

Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
Jijo

Exit Name           Description
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User Exit / Badi For CJ37, CJ34, CJ38

I want user Exit / Badi For CJ37, CJ34, CJ38 which will execute whenever there is any change for WBS budget (supplement / transfer / return) regardless WBS have assigned values.
This is required to trigger my Workflow.
Available Exit which i know is EXIT_SAPLBPFC_002 is executing only when WBS have assigned values otherwise not.
PLease reply ASAP.

Even you can search all exit and BADI:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=howtofinduserexitandbadi&adv=false&sortby=cm_rnd_rankvalue

User exit/BADI required to assign a pushbutton from transactionVA01 to IW51

Similar Messages

Maybe you are looking for