User exit EXIT_SAPLMV01_002
Hi All,
I have been given this user exit where i have insert a logic which will over write standard fields of MARA table with custom fields. My question is how to test my logic whether it is working fine or not?
I am using this user exit for outboud idoc for message type MATMAS.
Can anyone help me out?
Hi,
After changing the values in the customer exit EXIT_SAPLMV01_002, some where standard code will re-assign the standard values.
find out the another customer exit which is triggering before save, there you can do these changes.
Reward if useful,
Thanks,
Sreeram.
Similar Messages
-
Hi all.
I send a material using bd10 (matmas). I need for example add or change some information in receivng system (master data).
I found the user exits
EXIT_SAPLMV01_002
EXIT_SAPLMV02_002
I set a break point but how to set up a debbuging mode.
I only see the receiving idoc in WE02.
Any help ?
Thanks
BartoszHi Bartosz,
To be able to use debugging you first have to switch off the 'Immediate processing' in the partner profile for the Idoc in the receiving system (otherwise the Idoc will be processed immediately in the receiving system and you will not be able to debug).
Be sure to activate the exits by creating an enhancement project and then put a break-point in the exit. Finally send an Idoc to the receiving system and pick it up using transaction BD87. Now your processing will stop at the break-point.
Regards,
John. -
User exit for incoming PO - (PO is created by CIFing TLB order to R/3)
Hi All,
I need to find out the APO INBOUND user exit for reciving the PO information from the connected R/3 system. Initially a TLB order is created in APO and CIFed to APO and after the PO is created in connected R/3 system this PO number and related information is CIFed back to APO and this TLB order is replaced by the R/3 PO number.
Please help me outto gain full points.
Thanks in Advance,
Chandan DubeyHi,
I am not clear with ur query and therefore check out the list of Inbound and outbound Idoc user-exits:
IDoc Inbound User Exits
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
IDoc Outbound User Exits
72. ACCONF
Confirmation of IDoc processing from the application
ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
Link for the same:
http://erpgenie.com/abaptips/content/view/302/62/
Pls reward helpful points.
Regards,
Ameet -
User Exits for Inbound Process
hi all
can any one please give some example user exits in inbound process and explain the omportance of user exits
Thank you,
Swapnahi
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
Types of User exits
1. Menu Exits
2.Function exits
3.Table exits
4.Screen exits
5.Keyword exits
6.Field exits.
also refer to the links below.. can get more info on user exits
list of user exits
http://www.planetsap.com/userexit_main_page.htm
can also get the list of user exits thru..
Tcode: CMOD -> Utilities -> SAP Enhancements -> F8 Execute
User Exits Notes:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/8c5738ee806b0ee10000009b38f889/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
below are some of the useful invound and outbound userexits
<b>IDoc Inbound User Exits</b>
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
<b>IDoc Outbound User Exits</b>
72. ACCONF
Confirmation of IDoc processing from the application
ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
===
User exits for Pricing.
1.USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ
2.USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
3.USEREXIT_FIELD_MODIFICATION
4.USEREXIT_FIELD_MODIFIC_KZWI
5.USEREXIT_FIELD_MODIFIC_KOPF
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
====
Reward if USeful
Thanx & regards
Naren.. -
User exit for idoc extension for material master (matmas05)
Hello all,
I have 10 custom fields added to anl idoc of basic type matmas05.
i created a new segment under parent segment E1MARA1
Now i want to find out the user exit where in i can write a code to read the data of this segment and populate into the data base table.
Can anybody provide me with the name of the user exit?
Regards,
RoshaniCheck enhancement MGV00001 in SMOD.
Exit Fm is EXIT_SAPLMV01_002
Regards,
Naimesh Patel -
User exit ZXPADU02 - evaluating SY-UCOMM
Hello everyone,
I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data.
I am using user exit ZXPADU02 for this purpose. My problem is that SY-UCOMM does not seem to hold reliable data in this user exit, and SSCRFIELDS does not seem to be supported at all.
My code looks like this (only the relevant code snippet in ZXPADU02):
CASE INNNN-INFTY.
WHEN '0007'.
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
EXPORTING PRELP = INNNN
IMPORTING PNNNN = P0007.
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
EXPORTING PRELP = PSAVE
IMPORTING PNNNN = P0007_ALT.
IF P0007_ALT-SCHKZ <> P0007-SCHKZ
AND IPSYST-MASSN IS INITIAL " do not warn within an info group of a personnel action
AND SY-UCOMM = 'UPD'. " only warn when saving the data -> problem here <-
MESSAGE 'Do not change IT7 directly or else.' TYPE 'I' DISPLAY LIKE 'E'.
SHOW_DATA_AGAIN = 'X'.
ENDIF.
At first glance, the above works nicely. But this is what happens when I test more thoroughly:
I create a new period in IT 7, enter a P0007-SCHKZ other than the one that was previously valid, press F11. Some warnings appear (for different reasons), which I dismiss using the Enter key. Afterwards, the above code fires, the error message is being displayed, and I am thrown back into the data screen. So far, so good.
Now I simply alter the value in the field "Weekly hours" (P0007-WOSTD) and press Enter (!). Again a series of warnings appear, including one that a dataset is going to be deleted (seeing that an IT 7-period with just the same date range already exists). I confirm that with Enter, and the data is being saved. The above code does not fire because I have only pressed Enter - but the data is being saved anyway!
Looks like a pretty erroneous behavior on the side of the SAP system. The question is whether I have a chance to do something about it in the code.Mihir Nagar wrote:
Dear Petersen,
Your IF condition seems ok. I doubt on the message statement. Can you replace your message statement with type E.
MESSAGE 'Do not change IT7 directly or else.' TYPE 'E'.
ENDIF.
Hope this works.
Regards,
Mihir.
I did not expect this to work, because normally you use type 'E'-messages only in certain PAI-environments, but it does the job, thank you!
make use of field IOPER of the structure PSYST to check on the infotype actions INS, MOD, COP, DEL...
In this particular case I did not care, so I did not check that. IT 7 should only be maintained through personnel actions in our case.
Next you can check with sy-ucomm field the different between "enter" and "save". With "save" sy-ucomm will be 'UPD'.
That is what I did, but as I described, there was a situation when SY-UCOMM is SPACE, but the system saved anyway due to a prior save attempt. -
Using a variable not in the Export,Import, table Parameters in USER EXIT
Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
AshaHi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti.... -
How to find out the user exit is implemented
Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance. -
How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards -
How to find out appropriate user exit
Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
BasuLook for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM -
How to find out FICO user exits that are used by User
How to find out the FICO user exits that are used by user.
Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks. -
Free Goods Problem and User Exit if needed in Sales Order
Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka MitraHello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks. -
User Exit/ Badi for Changing Quant parameters during TO Creation
Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta MHi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis -
BADI/user exit for transcation code "BP" in CRM
Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc. -
What are the user-exits which will trigger on saving Sales Order
Hello Experts!!!
I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002 Predefine sold-to party in sales document ). So it is working fine.
Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
Thanks a lot on advance.Hi
U can't find it there,because it's a include, not enanchement.
So u need to use the trx SE38, not CMOD.
For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
U need to get the access key by OSS in order to change them.
These are the rest of the includes where u can find other exits:
INCLUDE MV45ATZZ. " Data definitions in MV45ATOP
INCLUDE MV45AOZZ. " User-modules PBO
INCLUDE MV45AIZZ. " User-modules PAI
INCLUDE MV45AFZA. " User-forms < 3.0
INCLUDE MV45AFZB. " User-forms
INCLUDE MV45AFZC. " User-forms < 3.0D
INCLUDE MV45AFZD. " User-forms 3.0E
INCLUDE MV45AFZF. " User-forms 3.0F
include mv45afzg. " User-forms 3.1G
INCLUDE MV45AFZH. " User-forms 4.6B
INCLUDE MV45AFZZ. " User-forms
INCLUDE MV45AFZ4. " User-forms 4.0
Anyway u can find some information about these exit in customizing (trx SPRO):
Sales and Distributions->System modifications->User exits
Max
Maybe you are looking for
-
Can you sign in with more than one apple id on an iPad?
Can you sign in with more than one apple id on an iPad?
-
What is the consensus on soundcards? Should I upgrade for studio work using L7E or just keep the built in sound card in my powerbook G4.
-
VB6 Crystal Reports 8.5 - RDC Component to Export Reports To Printer
Hi, We have an application written in VB6 that uses the RDC in Crystal Reports 8.5 to export reports the printer. We are currently making some security changes to lock down several of our servers. Currently our custom print queue for Crystal runs i
-
How do I concatenate text from a date?
In excel I have the following formula: =CONCATENATE("Ref: RVG ",TEXT(J4,"ddmmyy")) I found in the Numbers Help that T() should retrieve text from a cell, but whether I try T(J4) or T(J4,"ddmmyy") etc it either gives an error or is blank (J4 contains
-
I put music on my ipad by mistake by downloading all purchased songs via wifi and now I cannot get them off. is there a way to get rid of them?