Using a variable not in the Export,Import, table Parameters in USER EXIT

Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
Asha

Hi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti....

Similar Messages

Using shared variable not in the project.

hi all
I have a project with the 2 RT targets and the development PC which were i currently deploy all my shared variables, But I need to finally deploy these shared variable in a different stand alone windows based machine. To do this I created separate application which does nothing but deploys the shared variables in this PC. but when i tried to bind to this variables (frount panel binding) from my RT targets it woudnt work, the led does not glow, it is always transperent. but when I tried to connect to these variables from my development PC it works fine. I double checked the firewall problem, that is not the case here. Can anyone tell me what am i doing wrong?
Thanx
Arun

Hi Prashanth
Thanks for the reply. I did realize that the front panle connection would not be supported in RT, now i have the shared variables on my RT machine which has te source as the windows machine. If the windows machine is my development machine the shared variables connect fine, but if its a different PC the shared variables connect for few seconds and with the error info "shared variable value 0" then the connection gets disconnected.
Also i read a note in the shared variables help, it said to subscribe and publish on a network shared variable all the shared variable which connects to this variable should be active. does this mean that if there are 2 RT targets that subscribe data and one of them is not switched on the shared variable does not work.?
Thanks again for your support.
Regards
Arun

How to wrap the export/import utility using perl

Hello,
How to user perl to wrap the export/import utility? Thanks.

If you are using DBMS_SCHEDULER, I would expect that you would just invoke export directly. I'm not sure I see the benefit to putting a Perl wrapper on top in that case. Of course, DBMS_SCHEDULER could invoke a Perl script just as it can invoke a shell script if there was some particular need to have a Perl layer there.
Of course, I assume that you're not trying to invoke export on a regular basis as your primary backup method... Exports should be a complement, not a supplement, to a proper physical backup (i.e. via RMAN).
Justin

Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

What roles are required to run the export import?

Hi,
I want some info on roles are required to run the export import.
I have done the following in sys user:
GRANT EXP_FULL_DATABASE TO IMP_TEST
GRANT IMP_FULL_DATABASE TO IMP_TEST
But Doing the above command the IMP_TEST will get all priviles (also the system tables)
Is there any mechanism to restrict the user to export and import only the tables not anything?
Thanks and Regadrs

Hi!
If you create a user like this
CREATE USER imp_test identified by password;then the user will be able to import or export only its own schema. If you grant the exp_full_database and imp_full_database roles to this user like you did then the use will be able to export or import the hole database (with SYS schema). But as far as I know you can't set any more restrictions to the user.
yours sincerely
Florian W.

How to turn on and off the Export Import capability in Quality &Production

Hi All,
Can any one tell me how to turn on and turn off the export, import capabilities in the Quality n Production Systems . All I know about this is, it is an SAP XI Basis task, and I am not able to get any documents related to it .
Thanks in Advance,
Hemanthika.

Hi,
Do you mean you want to disable Tools --> Export / Import feature?
Normally if you are using File Transports then lock the OS level access for all user id's and this would make sure that no transport of objects take place.
Regards
Bhavesh

Could not complete the export command because of an application error

Every once in awhile I get the error, "Could not complete the export command because of an application error" when using the Save for Web option. It's really confusing because the error is not consistent. I don't get it all the time. In fact, 99% of the time I can save with no problems. When I quit Photoshop and reopen my files they seem to save just fine. Does anyone know why this happens, and how to prevent it from happening in the future?
Here are my specs:
Macintosh: iMac
OS: 10.6.8
Photoshop: CS3 (v10.0.1)
Any help is greatly appreciated!

No idea about the specific issue, but I like to pass on some general advice I have received myself here over time:
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.

HT203052 How do I delete an icloud account which uses an email account no longer in use - I do not have the the passwrd for this account

How do I delete an icloud account which uses an email account no longer in use - I do not have the the passwrd for this account

You will need the password. If you can't get it reset via http://iforgot.apple.com (if you remember the answers to the account's security questions then you should be able to reset it via them) then try contacting Support in your country, they should be able to reset it.
Contacting Apple about account security : http://support.apple.com/kb/HT569
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html

Could not complete the export command because the file could not be found

When I try to save for web, Photoshop pops up a dialog box that says "could not complete the export command because the file could not be found".
What is the solution for this?

Please provide more information (Photoshop version, OS, target volume, …).
Does the file’s or one of the folders’ name contain problematic letters (slash etc.)?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Help me! "Could not complete the export command because of an application error"

Please, help me!
I've got the mistake "
"Could not complete the export command because of an application error" when I save for web in PS3 in win
thks so much,

You need to provide much more info about your system or else this is pointless.
Mylenium

Urgent: Error-Record 39,779, segment 0001 is not in the cross-record table

Hi Gurus,
This is an urgent production issue: I got the following error-
I am updating data records from a DSO to Infocube in delta mode,
1.Record 39,779, segment 0001 is not in the cross-record table
2.Error in substep: End Routine
I dont know problem is in the End Routine or somewhere else,
The End routine is this:
PROGRAM trans_routine.
 CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
 DATA:
 p_check_master_data_exist
 TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
 Available information: Refer to methods of
 interface 'if_rsbk_request_admintab_view'
 p_r_request
 TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
 TYPE-POOLS: rsd, rstr.
Rule specific types
 TYPES:
 BEGIN OF tys_TG_1,
 InfoObject: ZVEHICLE Unique Vehicle ID.
 /BIC/ZVEHICLE TYPE /BIC/OIZVEHICLE,
 InfoObject: ZLOCID Mine Site.
 /BIC/ZLOCID TYPE /BIC/OIZLOCID,
 InfoObject: ZLOCSL Location Storage Location.
 /BIC/ZLOCSL TYPE /BIC/OIZLOCSL,
 InfoObject: 0VENDOR Vendor.
 VENDOR TYPE /BI0/OIVENDOR,
 InfoObject: ZNOMTK Nomination Number.
 /BIC/ZNOMTK TYPE /BIC/OIZNOMTK,
 InfoObject: ZNOMIT Nomination Item.
 /BIC/ZNOMIT TYPE /BIC/OIZNOMIT,
 InfoObject: ZNOMNR Nomination number.
 /BIC/ZNOMNR TYPE /BIC/OIZNOMNR,
 InfoObject: ZVSTTIME Vehicle Starting Time Stamp.
 /BIC/ZVSTTIME TYPE /BIC/OIZVSTTIME,
 InfoObject: ZVEDTIME Vehicle Ending Time Stamp.
 /BIC/ZVEDTIME TYPE /BIC/OIZVEDTIME,
 InfoObject: ZNETWT Net Weight.
 /BIC/ZNETWT TYPE /BIC/OIZNETWT,
 InfoObject: TU_GRS_WG Gross Wgt.
 /BIC/TU_GRS_WG TYPE /BIC/OITU_GRS_WG,
 InfoObject: ZTU_TRE_W Tare Wgt.
 /BIC/ZTU_TRE_W TYPE /BIC/OIZTU_TRE_W,
 InfoObject: ZCUSTWT Customer Weight.
 /BIC/ZCUSTWT TYPE /BIC/OIZCUSTWT,
 InfoObject: ZCAR_NO Car Number.
 /BIC/ZCAR_NO TYPE /BIC/OIZCAR_NO,
 InfoObject: ZINBND_ID Train Consist Inbound ID.
 /BIC/ZINBND_ID TYPE /BIC/OIZINBND_ID,
 InfoObject: ZOTBND_ID Train Consist Return Load.
 /BIC/ZOTBND_ID TYPE /BIC/OIZOTBND_ID,
 InfoObject: 0SOLD_TO Sold-to Party.
 SOLD_TO TYPE /BI0/OISOLD_TO,
 InfoObject: 0CUSTOMER Customer Number.
 CUSTOMER TYPE /BI0/OICUSTOMER,
 InfoObject: 0SHIP_TO Ship-To Party.
 SHIP_TO TYPE /BI0/OISHIP_TO,
 InfoObject: ZVEHI_NO Vehicle Number.
 /BIC/ZVEHI_NO TYPE /BIC/OIZVEHI_NO,
 InfoObject: ZCARSTDAT Car Start Date.
 /BIC/ZCARSTDAT TYPE /BIC/OIZCARSTDAT,
 InfoObject: ZCAREDDAT Car End Date.
 /BIC/ZCAREDDAT TYPE /BIC/OIZCAREDDAT,
 InfoObject: ZCARSTTIM Car Start Time.
 /BIC/ZCARSTTIM TYPE /BIC/OIZCARSTTIM,
 InfoObject: ZCAREDTIM Car End Time.
 /BIC/ZCAREDTIM TYPE /BIC/OIZCAREDTIM,
 InfoObject: 0COMPANY Company.
 COMPANY TYPE /BI0/OICOMPANY,
 InfoObject: ZCONTRACT Contract.
 /BIC/ZCONTRACT TYPE /BIC/OIZCONTRACT,
 InfoObject: 0PLANT Plant.
 PLANT TYPE /BI0/OIPLANT,
 InfoObject: ZLOADTIME Total Vehicle Loading time.
 /BIC/ZLOADTIME TYPE /BIC/OIZLOADTIME,
 InfoObject: ZSHIPDATE Shipping Date.
 /BIC/ZSHIPDATE TYPE /BIC/OIZSHIPDATE,
 InfoObject: ZSHIPTIME Shipping Time.
 /BIC/ZSHIPTIME TYPE /BIC/OIZSHIPTIME,
 InfoObject: ZMNEDDT Manifest End Date.
 /BIC/ZMNEDDT TYPE /BIC/OIZMNEDDT,
 InfoObject: ZMNEDTM Manifest End Time.
 /BIC/ZMNEDTM TYPE /BIC/OIZMNEDTM,
 InfoObject: ZLDEDDT Loaded End Date.
 /BIC/ZLDEDDT TYPE /BIC/OIZLDEDDT,
 InfoObject: ZLDEDTM Loaded End Time.
 /BIC/ZLDEDTM TYPE /BIC/OIZLDEDTM,
 InfoObject: ZMANVAR Manifest Variance.
 /BIC/ZMANVAR TYPE /BIC/OIZMANVAR,
 InfoObject: ZTU_TYPE Trpr Unit Type.
 /BIC/ZTU_TYPE TYPE /BIC/OIZTU_TYPE,
 InfoObject: ZACTULQTY Actual posted quantity.
 /BIC/ZACTULQTY TYPE /BIC/OIZACTULQTY,
 InfoObject: ZVEDDT Vehicle End Date.
 /BIC/ZVEDDT TYPE /BIC/OIZVEDDT,
 InfoObject: ZVEDTM Vehicle End Time.
 /BIC/ZVEDTM TYPE /BIC/OIZVEDTM,
 InfoObject: ZVSTDT Vehicle Start Date.
 /BIC/ZVSTDT TYPE /BIC/OIZVSTDT,
 InfoObject: ZVSTTM Vehicle Start Time.
 /BIC/ZVSTTM TYPE /BIC/OIZVSTTM,
 InfoObject: ZTRPT_TYP Vehicle type.
 /BIC/ZTRPT_TYP TYPE /BIC/OIZTRPT_TYP,
 InfoObject: 0CALMONTH Calendar Year/Month.
 CALMONTH TYPE /BI0/OICALMONTH,
 InfoObject: 0CALYEAR Calendar Year.
 CALYEAR TYPE /BI0/OICALYEAR,
 InfoObject: ZLOEDDT Quality Sent End Date.
 /BIC/ZLOEDDT TYPE /BIC/OIZLOEDDT,
 InfoObject: ZLOEDTM Quality sent End Time.
 /BIC/ZLOEDTM TYPE /BIC/OIZLOEDTM,
 InfoObject: ZATMDDT At Mine End Date.
 /BIC/ZATMDDT TYPE /BIC/OIZATMDDT,
 InfoObject: ZATMDTM At Mine End Time.
 /BIC/ZATMDTM TYPE /BIC/OIZATMDTM,
 InfoObject: ZDELAY Delay Duration.
 /BIC/ZDELAY TYPE /BIC/OIZDELAY,
 InfoObject: ZSITYP Schedule type.
 /BIC/ZSITYP TYPE /BIC/OIZSITYP,
 InfoObject: ZDOCIND Reference document indicator.
 /BIC/ZDOCIND TYPE /BIC/OIZDOCIND,
 InfoObject: 0BASE_UOM Base Unit of Measure.
 BASE_UOM TYPE /BI0/OIBASE_UOM,
 InfoObject: 0UNIT Unit of Measure.
 UNIT TYPE /BI0/OIUNIT,
 InfoObject: ZACT_UOM Actual UOM.
 /BIC/ZACT_UOM TYPE /BIC/OIZACT_UOM,
 Field: RECORD.
 RECORD TYPE RSARECORD,
 END OF tys_TG_1.
 TYPES:
 tyt_TG_1 TYPE STANDARD TABLE OF tys_TG_1
 WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
 METHODS
 end_routine
 IMPORTING
 request type rsrequest
 datapackid type rsdatapid
 EXPORTING
 monitor type rstr_ty_t_monitors
 CHANGING
 RESULT_PACKAGE type tyt_TG_1
 RAISING
 cx_rsrout_abort.
 METHODS
 inverse_end_routine
 IMPORTING
 i_th_fields_outbound TYPE rstran_t_field_inv
 i_r_selset_outbound TYPE REF TO cl_rsmds_set
 i_is_main_selection TYPE rs_bool
 i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
 i_r_universe_inbound TYPE REF TO cl_rsmds_universe
 CHANGING
 c_th_fields_inbound TYPE rstran_t_field_inv
 c_r_selset_inbound TYPE REF TO cl_rsmds_set
 c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
... "insert your code here
$$ end of 2nd part global - insert your code only before this line *
 CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
 Method end_routine
 Calculation of result package via end routine
 Note: Update of target fields depends on rule assignment in
 transformation editor. Only fields that have a rule assigned,
 are updated to the data target.
<-> result package
METHOD end_routine.
*=== Segments ===
 FIELD-SYMBOLS:
 <RESULT_FIELDS> TYPE tys_TG_1.
 DATA:
 MONITOR_REC TYPE rstmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Fill the following fields by reading Nomination and Vehicls DSO
SOLD_TO, Customer
data: L_TIMESTAMP1 TYPE timestamp,
 L_TIMESTAMP2 TYPE timestamp,
 L_TIMESTAMP3 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP4 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP5 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP6 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP7 TYPE timestamp,
 L_TIMESTAMP8 TYPE timestamp,
 L_TIMESTAMP9 type timestamp,
 L_TIMESTAMP10 type TIMESTAMP,
 L_CHAR1(14),
 L_CHAR2(14),
 l_duration type I,
 L_TS TYPE TZONREF-TZONE,
 l_flag,
 l_nomit TYPE /BIC/OIZNOMIT,
 l_error_flag.
l_TS = 'CST'.
Data: EXTRA_PACKAGE type tyt_TG_1.
data: extra_fields type tys_TG_1.
LOOP at RESULT_PACKAGE ASSIGNING <RESULT_FIELDS>.
clear l_error_flag.
Get sold_to and customer from nomination table.
 Select single SOLD_TO /BIC/ZLOCSL /BIC/ZCONTRACT COMPANY
 /BIC/ZMNEDDT /BIC/ZMNEDTM /BIC/ZLDEDDT
 /BIC/ZLDEDTM SHIP_TO /BIC/ZACTULQTY
 /BIC/ZLOEDDT /BIC/ZLOEDTM /BIC/ZDELAY
 /BIC/ZATMDDT /BIC/ZATMDTM
 /BIC/ZSITYP /BIC/ZDOCIND
 into (<RESULT_FIELDS>-SOLD_TO,
 <RESULT_FIELDS>-/BIC/ZLOCSL,
 <RESULT_FIELDS>-/BIC/ZCONTRACT,
 <RESULT_FIELDS>-company,
 <RESULT_FIELDS>-/BIC/ZMNEDDT,
 <RESULT_FIELDS>-/BIC/ZMNEDTM,
 <RESULT_FIELDS>-/BIC/ZLDEDDT,
 <RESULT_FIELDS>-/BIC/ZLDEDTM,
 <RESULT_FIELDS>-SHIP_TO,
 <RESULT_FIELDS>-/BIC/ZACTULQTY,
 <RESULT_FIELDS>-/BIC/ZLOEDDT,
 <RESULT_FIELDS>-/BIC/ZLOEDTM,
 <RESULT_FIELDS>-/BIC/ZDELAY,
 <RESULT_FIELDS>-/BIC/ZATMDDT,
 <RESULT_FIELDS>-/BIC/ZATMDTM,
 <RESULT_FIELDS>-/BIC/ZSITYP,
 <RESULT_FIELDS>-/BIC/ZDOCIND)
 from /BIC/AZTSW_0000
 where /BIC/ZNOMTK = <RESULT_FIELDS>-/BIC/ZNOMTK
 AND /BIC/ZNOMIT = <RESULT_FIELDS>-/BIC/ZNOMIT.
Select Invalid Nominations
if sy-subrc <> 0.
 l_error_flag = 'X'.
endif.
 <RESULT_FIELDS>-customer = <RESULT_FIELDS>-SOLD_TO.
Prepare time stamp for Time Differences
Vehicle Starting Time Stamp
clear : L_TIMESTAMP9,L_TIMESTAMP10.
CONVERT DATE <RESULT_FIELDS>-/BIC/ZCARSTDAT TIME
 <RESULT_FIELDS>-/BIC/ZCARSTTIM
 INTO TIME STAMP L_TIMESTAMP9 TIME ZONE l_TS.
Vehicle Ending Time Stamp
CONVERT DATE <RESULT_FIELDS>-/BIC/ZCAREDDAT TIME
 <RESULT_FIELDS>-/BIC/ZCAREDTIM
 INTO TIME STAMP L_TIMESTAMP10 TIME ZONE l_TS.
Clear : L_TIMESTAMP3, L_TIMESTAMP4,
 <RESULT_FIELDS>-/BIC/ZVEDTIME,
 <RESULT_FIELDS>-/BIC/ZVSTTIME.
<RESULT_FIELDS>-/BIC/ZVEDTIME = L_TIMESTAMP10.
<RESULT_FIELDS>-/BIC/ZVSTTIME = L_TIMESTAMP9.
L_TIMESTAMP3 = L_TIMESTAMP10.
L_TIMESTAMP4 = L_TIMESTAMP9.
Caliculate the load time
IF L_TIMESTAMP3 is initial.
 clear <RESULT_FIELDS>-/BIC/ZLOADTIME.
elseif L_TIMESTAMP4 is initial.
 clear <RESULT_FIELDS>-/BIC/ZLOADTIME.
else.
 CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
 EXPORTING
 timestamp1 = L_TIMESTAMP3
 timestamp2 = L_TIMESTAMP4
 IMPORTING
 DIFFERENCE = <RESULT_FIELDS>-/BIC/ZLOADTIME
ENDIF.
Caliculate the Manifest Variance
 clear : L_TIMESTAMP5,L_TIMESTAMP6,L_TIMESTAMP7,L_TIMESTAMP8.
 CONVERT DATE <RESULT_FIELDS>-/BIC/ZMNEDDT TIME
 <RESULT_FIELDS>-/BIC/ZMNEDTM
 INTO TIME STAMP L_TIMESTAMP7 TIME ZONE l_TS.
 CONVERT DATE <RESULT_FIELDS>-/BIC/ZLDEDDT TIME
 <RESULT_FIELDS>-/BIC/ZLDEDTM
 INTO TIME STAMP L_TIMESTAMP8 TIME ZONE l_TS.
L_TIMESTAMP5 = L_TIMESTAMP7.
L_TIMESTAMP6 = L_TIMESTAMP8.
Caliculate the Maniefest Variance
IF L_TIMESTAMP5 is initial.
 clear <RESULT_FIELDS>-/BIC/ZMANVAR.
elseif L_TIMESTAMP6 is initial.
 clear <RESULT_FIELDS>-/BIC/ZMANVAR.
else.
 CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
 EXPORTING
 timestamp1 = L_TIMESTAMP5
 timestamp2 = L_TIMESTAMP6
 IMPORTING
 DIFFERENCE = <RESULT_FIELDS>-/BIC/ZMANVAR
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
Delete datapackets with blank nominations
Delete datapackets with blank shipdate and Invalid Time Stamps
*IF <RESULT_FIELDS>-/BIC/ZNOMTK IS INITIAL OR
<RESULT_FIELDS>-/BIC/ZSHIPDATE IS INITIAL.
l_error_flag = 'X'.
*ENDIF.
<RESULT_FIELDS>-/BIC/ZVEHI_NO = 1.
<RESULT_FIELDS>-CALMONTH = <RESULT_FIELDS>-/BIC/ZSHIPDATE(6).
<RESULT_FIELDS>-CALYEAR = <RESULT_FIELDS>-/BIC/ZSHIPDATE(4).
if l_error_flag = 'X'.
Looks like Monitor Entries are not working in SP11.
Hence the following is commented temporarily.
CLEAR MONITOR_REC.
MONITOR_REC-MSGID = '0M'.
MONITOR_REC-MSGTY = 'S'.
MONITOR_REC-MSGNO = '501'.
MONITOR_REC-MSGV1 = <RESULT_FIELDS>-/BIC/ZNOMTK.
MONITOR_REC-recno = sy-tabix.
APPEND MONITOR_REC to MONITOR.
RAISE exception type CX_RSROUT_ABORT.
DELETE RESULT_PACKAGE index sy-tabix.
CLEAR L_ERROR_FLAG.
else.
 MODIFY RESULT_PACKAGE FROM <RESULT_FIELDS>.
endif.
clear l_nomit.
l_nomit = <RESULT_FIELDS>-/BIC/ZNOMIT.
extra_fields = <RESULT_FIELDS>.
Actual Qty and Contract details
 Select /BIC/ZLOCSL /BIC/ZNOMIT /BIC/ZCONTRACT /BIC/ZACTULQTY
 /BIC/ZSITYP /BIC/ZDOCIND
 SOLD_TO SHIP_TO COMPANY
 into (extra_fields-/BIC/ZLOCSL,
 extra_fields-/BIC/ZNOMIT,
 extra_fields-/BIC/ZCONTRACT,
 extra_fields-/BIC/ZACTULQTY,
 extra_fields-/BIC/ZSITYP,
 extra_fields-/BIC/ZDOCIND,
 extra_fields-SOLD_TO,
 extra_fields-SHIP_TO,
 extra_fields-company)
 from /BIC/AZTSW_0000
 where /BIC/ZNOMTK = <RESULT_FIELDS>-/BIC/ZNOMTK AND
 /BIC/ZNOMIT <> l_NOMIT.
 INSERT extra_fields into table EXTRA_PACKAGE.
 endselect.
ENDLOOP.
Append lines of extra_package to RESULT_PACKAGE.
*-- fill table "MONITOR" with values of structure "MONITOR_REC"
*- to make monitor entries
... "to cancel the update process
 raise exception type CX_RSROUT_ABORT.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "end_routine
 Method inverse_end_routine
 This subroutine needs to be implemented only for direct access
 (for better performance) and for the Report/Report Interface
 (drill through).
 The inverse routine should transform a projection and
 a selection for the target to a projection and a selection
 for the source, respectively.
 If the implementation remains empty all fields are filled and
 all values are selected.
METHOD inverse_end_routine.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "inverse_end_routine
ENDCLASS. "routine IMPLEMENTATION

Hi,
Most probably you are appending some records in the data package or deleting from the data package through end routine or expert routine or start routine.
I just solved it.....you will have to import the note 1180163.
Then modify the code which you are using....and include the function module as mentioned in the note 1223532.
You need to add the function module just before you append the records.This will work perfectly.
Thanks
Ajeet

Table Values in Export/Import/Tables RFC calls

Hi
I know that using Adaptive RFC, the best practice is to use the Tables section of the function rather than the import/export.
However, in ECC6.0, when creating entries in the Tables section of the FM it tells me that this section is obsolete.
Should I start to use the export/import parameters instead?
Cheers
Ian

Hi Ashu
Thanks for the reply but there is no code snippet. It is a 'best practice' question.
The document <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de">Effective Web Dynpro - Adaptive RFC</a> details that table values should not be passed in the exporting/importing parameters of the R/3 RFC enabled function module. THey should always be added to the Tables section.
However, in ECC6.0, when adding entries into the Tables section of an R/3 function module, it says that this practice is obsolete.
Therefore, what is the current best practice for Adaptive RFC??
Cheers
Ian

How to export / import tables from UAT Environment to Devlopment in oracle

i wanted to share some points about export/import tables in oracle.
we have two environments one is development and integrated user acceptance test (UAT).
we have finalized table structures with data in UAT. i wanted to move from UAT to Development.
i found some commends in google. I tried but I am not able to export and then its throwing some errors.
i am explaining below what i want to do and what i want did.
Please provide solution what i need to do.
admin credentials in UAT
username :venkat_admin
password :venkat_admin
UAT user/schema
username : ods_inb_stg
password : ods_inb_stg
development environment credentials
admin user name : dev_admin
password : dev_admin
Development user/schema
username :ods_inb_dev
password :ods_inb_dev
Above mentioned schema names i want move data from UAT (ods_inb_stg) to development (ods_inb_dev)
I logged in uat ods_inb_stg user and then
I used this command
Exp ods_inb_stg/ods_inb_stg file=party_pt_address.expdat tables=(party,party_address)
log=party_pt_address.log;
getting error
Unknown command beginning "exp ods_inb_stg/..." - rest of line ignored.
What should I do any one help.
One more thing i have more than 100 tables how to export all tables and which is the easiest way and how to do it.
Thanks in Advance
Venkat

Hi,
based import and export we need to do.
suppose we think we have created tables in production and data also populated. we need to export the tables with data. i am able to export the tables with data some tables or full database.
suppose we have development environment. in development environment there is no tables. we can treat nothing in development. we have only username,password and hostname.
when you import the tables production to development automatically create the table structures with data.
where ever we wanted to import the tables no need to create table structures. thats why no need to think about table structures.

Could not find the main class: SearchExcel. Program will exit. ????

sekic0429{uabudd_milou}[w10/rbssw/2.0] pwd
/tmp/MyJava/jexcelapi
sekic0429{uabudd_milou}[w10/rbssw/2.0] printenv CLASSPATH
/tmp/MyJava/excelapi:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib
sekic0429{uabudd_milou}[w10/rbssw/2.0] ls
build ExcelSearch.java index.html resources SearchExcel.java~ tutorial.html
docs ExelSearch.java~ jxl.jar SearchExcel.class src workbook.dtd
ExcelSearch.class formatworkbook.dtd jxlrwtest.xls SearchExcel.java TestSpecification.xls
sekic0429{uabudd_milou}[w10/rbssw/2.0] javac -extdirs . ExcelSearch.java
sekic0429{uabudd_milou}[w10/rbssw/2.0]
sekic0429{uabudd_milou}[w10/rbssw/2.0] java ExcelSearch
Exception in thread "main" java.lang.NoClassDefFoundError: ExcelSearch
Caused by: java.lang.ClassNotFoundException: ExcelSearch
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
Could not find the main class: ExcelSearch. Program will exit.
sekic0429{uabudd_milou}[w10/rbssw/2.0] cat ExcelSearch.java
import java.io.File;
import java.io.IOException;
import java.util.Date;
import jxl.*;
import jxl.read.biff.BiffException;
public class ExcelSearch
public static void main(String[] args)
try
Workbook workbook = Workbook.getWorkbook(new File("TestSpecification.xls"));
catch (IOException e)
e.printStackTrace();
catch (BiffException e)
e.printStackTrace();
Regards Peter, hope for answer

r035198x wrote:
Where is SearchExcel.class?Excellent question, though I think I spotted a problem with the cp supplied.
Note the documentation for -cp state (in part)
For example, if directory foo contains a.jar and b.JAR, then the class path element foo/* is expanded to a A.jar:b.JAR, except that the order of jar files is unspecified.So instead of this..
java -cp /tmp/MyJava/excelapi:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib SearchExcel..try this..
java -cp /tmp/MyJava/excelapi/*:/app/jdk/1.6.0_16/jre/lib:/app/jdk/1.6.0_16/lib SearchExcelNotes:
1) Adding the JRE classes to the classpath should not be necessary, but I left the rest of the cp unaltered to highlight the one specific difference I am suggesting.
2) When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the indentation and formatting of the sample. To use them, select the sample text and click the CODE button.
If that still fails, tell us more specifically where the SearchExcel class is by copy/pasting the output (within code tags) of the command..
prompt>jar -tvf mysearchexcel.jarWhere, of course, you replace 'mysearchexcel.jar' with the actual Jar name it is supposed to be located in.
Edit 1:
Changed JavaDocs -> documentation.
Edited by: AndrewThompson64 on Jan 11, 2010 7:12 PM

What are the most important tables in SD, MM, PP, FI , CO and QM?

Hi all,
What are the most important tables in SD, MM, PP, FI , CO and QM? i.e. most used.
Thanks,
Charles.
+++++++++++++++++

In FI:
 BKPF Accounting documents (Header)
 BSEG Item level
 BSID Accounting: Secondary index for customers
 BSIK Accounting: Secondary index for vendors
 BSIM Secondary Index, Documents for Material
 BSIP Index for vendor validation of double documents
 BSIS Accounting: Secondary index for G/L accounts
 BSAD Accounting: Index for customers (cleared items)
 BSAK Accounting: Index for vendors (cleared items)
 BSAS Accounting: Index for G/L accounts (cleared items)
In SD:
 VBAK Header data
 VBAP Item data
 VBPA Partners in sales order
 VBKD Sales district data
 VBEP Data related to line items, delivery lines
 VBRK header data
 VBRP Item data
 LIKP Delivery header
 LIPS Delivery item
 VTTK Shipment header
 VTTP Shipment item
 VTTS Stage in transport
 VTSP Stage in transport per shipment item
 VTPA Shipment partners
 VEKP Handling Unit - Header Table
 VEPO Packing: Handling Unit Item (Contents)
In MM:
 EKKO Purchase document
 EKPO Purchase document (item level)
 EKPV Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
 EKET Delivery schedule
 VETVG Delivery Due Index for Stock Transfer
 EKES Order Acceptance/Fulfillment Confirmations
 EKKN Account assignment in purchasing
 EKAN Vendor address purchasing
 EKPA Partner functions
 EIPO Item export / import data
 EINA Purchase info record (main data)
 EINE Purchase info record (organisational data)
 EORD Source list
 EBAN Purchase requisition
 EBKN Purchase Requisition Account Assignment
 MKPF material document
 MSEG material document (item level)
 MARA Material master
 MAKT Material text
 MARC Material per plant / stock
 MVKE Material master, sales data
 MARD Storage location / stock
 MSKA Sales order stock
 MSPR Project stock
 MARM Units of measure
 MEAN International article number
 PGMI Planning material
 PROP Forecast parameters
 MAPR Link MARC <=> PROP
 MBEW Material valuation
 MVER Material consumption
 MLGN Material / Warehouse number
 MLGT Material / Storage type
 MPRP Forecast profiles
 MDTB MRP table
 MDKP Header data for MRP document
 MLAN Tax data material master
MTQSS Material master view: QM
In QM:
 QALS Inspection lot record
 QAMB Link inspection lot - material document
 QAVE Inspection usage decision
 QDPS Inspection stages
 QMAT Inspection type - material parameters
 QINF Inspection info record (vendor - material)
 QDQL Quality level
 QDPS Inspection stages
In PP:
 AUFK Production order headers
 AFIH Maintenance order header
 AUFM Goods movement for prod. order
 AFKO Order header data PP orders
 AFPO Order item
 RESB Order componenten
 AFVC Order operations
 AFVV Quantities/dates/values in the operation
 AFVU User fields of the operation
 AFFL Work order sequence
 AFFH PRT assignment data for the work order(routing)
 JSTO Status profile
JEST Object status
 AFRU Order completion confirmations

Using a variable not in the Export,Import, table Parameters in USER EXIT

Similar Messages

Maybe you are looking for