User exit for triggering release strategy
Hello Experts,
My requirement is when changes are made in purchase order (ME22N) then once again release strategy will have to get trigger.
is the user exits exists for this purpose,if yes, What is it?. I searched alot but not able to find right exits.
Hello ,
I think you can achieve this via configuration .Basically you want the release strategy to get redetermined based on the changes in the item or if the price of these items increase a certain level .if you have the release startegy as changeble in the SPRO ticked it will automatically go for new release strategy if you have the value of release indicator set .This can be done SPRO->MM->Purchase order->Release procedure for purchase order->Define release procedure->Release indicator.
Set the appropriate value .
Remember you need to know what is that it retrigger that release strategy .
The link below deals with similar requirement ....
[http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/retrigger-release-strategy-for-purchase-requisition-with-any-change-1858101]
Thanks
Anjaneya .
Edited by: Anjaneya Bhardwaj on Aug 31, 2011 8:21 AM
Similar Messages
-
User Exit for Requisition Release Strategy
Hi All,
Is anyone able to provide any guidance on determining the release strategy of a purchase requisition via a user exit? It has become neccessary to do this due to certain shortcomings of the classes and characteristic functionality.
I believe it's possible, I just don't know how.
Thanks.
Richardgo SMOD and enter enhancement M06E0004 it is exit LXM06U13
-
User exit in PR Release Strategy/Workflow
Hi xperts,
Need to seek some clarification regarding above subject.
If i were to set in release code config the workflow setting is "9" that is role resolution via user exit, do i still need to config the workflow?
If i do NOT need to config the workflow (whether by user id or position id or etc), how do I assign authorization of release code to the approver?
Thanks in advance.Thanks Jurgen
I know that the codes will be assigned via authorization profiles and roles. Let me rephrase my questions:
1. If using user exit for triggering workflow, do i need to maintain the workflow config? or the system will route automatically to the user/approver inbox/email by whatever conditions that hv been setup (or on the other hand, NO need to maintain the workflow cofig)?
2. If system will automatically route to the approver inbox, how do i identify the approvers user id that i need to assign the role?
Thanks.
Anybody??
Edited by: MM1974 on May 19, 2010 4:31 AM -
User exit for the release of Purchase Order
Hi Friends,
I am searching for a user exit which should trigger at the time of Purchase Order release in ME29n transaction.
If anyone can help me for the same....!!!
I need the exact exit which triggers at the release of PO....
Points will be rewarded for the needful replies.
Regards,
Mandeep.HI,
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
USE THIS PROGRAM TO GET ANY USER EXIT BY GIVING THE TCODE.
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
REGARDS,
PRIYA.
Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:21 AM
Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:40 AM -
Please give me User Exit for Credit Release -Urgent-
Please send the User Exit for Credit release
Mr.Goutam
My request is that dont continue your questions in one thread.
Two options are available for you to post in this forum
a) First list out what are all your requirements and ask this forum in which specific area you have doubts. If all your questions are answered, award points who have given the solution for you.
b) Post question one by one and wherever your questions are answered, close the thread and reward points to the members.
If you take this thread, Initially you raised a question on Credit Limit and many of us have answered your question and the thread should have been closed. But questions are continuing with same subject but with different topics which I feel is WRONG.
Hope you understand now.
Thanks
G. Lakshmipathi -
Hi Guys,
ML81N work in a manner such that if the net amount for any PO/Service entry is less than $2500 then its 'Release Strategy' tab is not active.
I have a requirement where i have to make that tab active and select the Lowest Release Strategy when the amount is less than $2500.
Can anyone please tell me the name of the user exit that controls the 'Release strategy'.
Points will be awarded...
Thanks
RahulHi
Your settlement rule says "Settle to Cost Center" only.... I dont think any user exit can help in this case, if you want to settle occasioanlly to 2 cost objects
Try with these options
Option A
1. Remove the 100% validation tick in the settlement profile...
2. Maintain 2 settlement rules... i.e. One with Cost center and another with PSG... If any warning comes, ignore it
3. Execute settlement now
Option B
1. Maintain settlement rule with PSG as settlement receiver
2. In the same Settlement rule, Menu GO TO > DETAILS and maintain Cost Center also....
3. Now execute settlement...
Option C
1. Maintain settlement rule with PSG as settlement receiver
2. In the same Settlement rule, populate Cost Center also as a Valid Characteristic
3. Now execute settlement...
BR,Ajay M -
User exit for contract release order.......
Hi All,
I have a question...
when we create a sales order and type the sold-to party the system dispalys(pop-up screen) the open contracts against the customer. It is up to us wheather we can copy any one of the contacts into the sales order and create a release order or we can just cancel the pop-up screen and create a new sales order with out reference to a sales order.
<u>HERE my requirement is as follows</u>.
1) <b>When a customer has open contacts and validity period we should make user to copy any one of the the existing contracts in the pop-up screen.</b>
2) <b>At the same time if the customer has got no contracts against him he should be allowed to cerate a plain sales order.</b>
I have tried with user exit Change document & User exit Save document in include <b>MV45AFZZ</b> but our code (user exit) should fire before or at the time of pop-up screen(containing the open contracts against the customer) which is just not happening.
Has any one of you came across of any solution for this kind of scenario...
One last option i have got is to disable the close push button taking the access key and changing the standard code........but this will effect the other places where this close button is used.
Please let me know how to go about it.
Thanks in advance......for your valuable time & precious knowledge.
With regards,
<b>Pavan</b>Have you tried applying code to EXIT_SAPLV46H_001 - Customer Function When Creating Item?
Or EXIT_SAPLV46H_002 - Customer Function for Partner Changes? -
User exit for stock removal strategy.
Hi Experts,
I have a scenario that I want to use FIFO stock removal strategy which is based on the old MRP price in the storage type. How
Can I impliment his User exist or any predefined user exit are there for this scenario.
Thanks
Raghu.Please use enhancement MWMT0004 and MWMt0013
-
Purchase requisition , ME51N, user exit for change Release date
Hello.
Purchase Requisition ( transaction ME51N).
I want to change the value of u201ERelease dateu201C using user-exit EXIT_SAPLMEREQ_005.
CALL METHOD im_req_item->get_data
RECEIVING
re_data = get.
set = get.
set-frgdt = u2026..
CALL METHOD im_req_item->set_data
EXPORTING
im_data = set.
Next, in dynpro is visible the right value from EXIT_SAPLMEREQ_005, but when saving the system uses another value, not the value from user exit.
Do you anybody have some experiences with this problem?
LumirHi
The USer Exit you can use for the ME51n Tcode is by using Badi's.The Badi you can use is ME_PROCESS_REQ_CUST BADI.
Method to be used: PROCESS_ITEM
This link gives you a brief idea.Hope it helps you.
BADI for ME51N
Thanking you. -
Hi Gurus!
I am searching for an Exit for the PO in ME21N.
I want to restrict the PO value to a certain limit with respect to PR.
Exit should trigger while creation of PO in ME21N.
Points will be rewarded!!!
Regards,
EsakiHi,
You can use the BADI ME_PROCESS_PO_CUST to meet your requirement.
Select the method depending on the requirement.
Use SE18 to view the BADI definition and use SE19 to implement BADi.
Reward points if it is helpful.
regards,
Prasanna
Edited by: prasanna j on Mar 27, 2008 5:28 AM -
User Exit for getting Purchase Requisition Release Strategy
Hi Experts,
When a user creates a PR I need to know the user exit I need to implement so that the First Approver (Processor) text in the Release Strategy is populated from a custom table. I have seen that the field is MEREL_S_GRID1-STEXT. I also need to know if I can implement a user exit so that it pulls the release strategy for a PR for assets (Acct Category A) since it is pulling for Acct Category K (Cost Centre) and the Release Strategy tab is appearing in this case.
Kind Regards,
DarlingtonHi Meenakshi,
Thanks for the very useful answer. It has given clues on how to resolve this issue. I have resolved this issue for the Asset item category using the following thread: user exit for requisition release strategy, and also SAP Note 365604.
However, I have another issue, the release strategy for Stock Items, (item category blank) is not pulling through. I need to use the same method above but would like to know how it determines the funds centre for a specific stock item. I couldn't find where that is implemented in the material master and I need info on how to determine the account assignment for stock items based on the funds centre.
Regards and Thanks. -
Hi Gurus,
I am looking for BADI's or User exits for transaction ME23n.
Exactly I am looking for BADI or user exit for the release strategy for the PO and then mailing it to th e apporover.
regards
kanishkadear ,
check out these two badi it may be useful for your requiremrnt
ME_RELEASE_CREATE
SMOD_MRFLB001
Cheers
fareed -
PC-WQS: User exit for material valuation
Hello,
Currently we use data from the purchase info records to carry out material valuation of raw materials in the cost estimate. The client would like to get this data from the contracts instead of the info records since all purchase orders get information from the contracts. The second reason is that maintenance of the info record is very cumbersome and prone to errors when creating or updating the cost/ quantity.
My question is, has anyone used the user exit COPCP005 - User exit for material valuation (strategy U) in the valuation variant and has anyone gone after the contracts to get the purchase price?
If yes, I would like to know how you did it.
Thanks,
dineshCan you explain a little more where you encountered the problem?
1. Is there a Val Strategy before the Val Strat U that is probably able to find a price for costing?
2. Is the User Exit being triggered?
3. Can you run CK11N in the debug mode (/h) and check if the User Exit is triggered?
4. If all of these occur, the problem probably lies in the ABAP code... check for changes in the material number range or plant codes, or the plant-specific material status - the system does not valuate if the status does not permit it to.
If nothing works, come back with confirmation of the above and we'll go forward from there.
Cheers. -
User exit for sending mail to customers
Hi all
I have a requirement where i need to trigger a mail to customer when the shipments are planned for the sales order.
I got a suggestion asking me to use user exits for this. I would like to know is there any user-exit for this. I came to know a user-exit exists to trigger mail when a purchase oreder is released. Is there any user-exit for triggering mail to customers once the shipmetns are planned for a sales oreder.check all exists with VA01
Transaction Code - VA01 Create Sales Order
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
No of Exits: 15
Reward points if useful......... -
User Exit for Purchase Order Release Strategy
Hi,
I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
Thanks in advance.
MickHi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Rgds,
Naren
Maybe you are looking for
-
Lack of space - How to transfer music to external drive ?
Hi, I just purchased an external drive so I could free some space on my PC. could someone tell me step by step how to transfer my music in iTunes to my new external drive and still be able to play all my songs by opening itunes. the external drive wi
-
When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using M
-
10g install failure on WIN XP and 2000
As soon as I start the installer from the 10g GA install CD, I get a message box that says it can't write to a temp location. The MS-DOS install window has an error that says "JRE not found in scratch path". I'm logged on as Administrator and have fu
-
Ok i would normally trying searching for help because im sure its here somewhere but i cant find the search feature anymore?? Its either gone or im blind. Anyway my phone seems to freeze like 5 times a day..it just froze while i was talking to someon
-
Do I need Artic Silver ??? Need Help Please !!!
I have an Xp 2400+ with retail hs&f i think my temps are a little high i did not have compound when i put sys together but have some artic silver 2 now should i apply or just leave alone ? Also am i doing any damage by not having any compound on it a