User Exit for VT02N/VT03N after printing shipment
Please, I need an EXIT after printing Shipment on VT02N/VT03N.
The propose is check if exists an entry in NAST table of an output type and call automatically the screen of Issue output.
Sample: After printing a shipment with output type "ZCS1" the program has to check if an entry output type "ZCS2" also exists in NAST table for the same shipment, and, in this case, shows to user, the screen of issue output filled with output type "ZCS2".
Thanks in advance!
Hi,
Below are some of the user exits for VT02N.
Have a look.
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI
V56LOCID Shipment Processing: Determine Location Identification
V56MVT04 Extensions for Collective Processing of Shipments
V56SLDET Shipment processing: Leg determination
V56TDLIF Filter Delivery Items for Shipment
V56UCHCH Shipment processing: Check whether changes were made
V56UCHCO Check shipments are complete
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UNUMB Shipment number allocation
V56USTAT User-individual definition of transportation planning status
V56USVDO Update new objects for transport
V56USVDP Preparation for updating new objects for transport?
Hope this will help u..
Regards,
Gautham Paspala
Similar Messages
-
Need BADI or USER EXIT for VT02n
HI Friends,
I'm writing a driver program for a ouptput type ZET1 (interface) the tcode is VT02N .
In menu bar: goto--> output here i've give the output type and save.
My Problem is, if there is any error on the driver program, it should be displayed the error msg while pressing the save button.
is there any BADI or User Exit.
Thanks & Regards,
Vallamuthu.MHi,
Check the below BADI's
BADI_LE_SHIPMENT BadI: Shipment Processing
BADI_V56N User Exit Transport - Message Determination
Regards,
Srini. -
Hi,
I'm changing the shipments during transportation planning using VT02N and on saving the changes , I need to update certain fields in the delivery tables LIKP and VTTK. Can anyone suggest which user-exit will be used to make these updates.
Thanks in advance,Hi,
Check the user exits
EXIT_SAPLV56U_004 - Shipment Processing: Prepare New Objects for Saving
EXIT_SAPLV56U_005 - Updating of Additional Objects Within Shipment Processing.
<b>Reward points</b>
Regards -
User exit for MIRO when after saving?
Hi,
As subject. Because we want to print credit memo when transaction is credit memo and want to pop up a window to confirm print or not?
Thanks a lot!!
Best Regards,
NicoleParkFromData
> BAPI_INCOMINGINVOICE_PARK: park invoice
SaveFromData
> BAPI_INCOMINGINVOICE_SAVE: enter invoice for verification in the background
PreliminaryPostSingle
> BAPI_INCOMINGINVOICE_POST: post provisional invoice
holpe this help.
Regards
Eduardo Chagas -
Badi or user-exit for QA32 after save
I need a badi or user exit to execute exactly after save in QA32 ..I tried belows but they are not that i want
QPL1_SUBSCREEN_ADDON
INSPECTIONLOT_UPDATE
Check these Exits:
QEVA0004 Exit for changing information line in usage decision he
QEVA0005 User subscreen for displaying add. data for usage decis
QEVA0006 Entry to usage decision transactions
QEVA0007 UD: Control of compulsory comment or long text presetti
QEVA0008 Usage decision: Customer function key (e.g. to cancel U
QEVA0009 UD: Predefinition of quantity to be posted to sample st
QEVA0010 UD: Usage decision check
QLCO0001 QM: Call alternative costs report from UD
QSS10001 Possibility of calling a different print reportHello Tuncer,
have you checked the BADI QE_SAVE? This is the last possible chance of changing data on saving a QM transaction and should be active in QA32.
The only other solution I can come up with is a follow-up action i.e. for the UD-code
Hope this information proves usefull.
Regards
Isabelle -
Hello Everybody,
Want some help from you as to what is the "Exit" which will help me doing some manipulation after we press Enter after the First Screen . I am not talking about Saving Data or Stuff . Specifically i want to fill the "Forwarding Agent" and "Route" field right after the User selects the "Shipment Type" on the first Screen , for the Transaction VT01N .
If User-Exits are not there , is there any BADI ??? Please help.
Please keep in mind , i want the Exit which will be hit right after the First Screen in VT01N.
Thanks,
SuddhaHi Take a look at the following list ( for VT01N) :
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
V56LOCID Shipment Processing: Determine Location Identification
V56MVT04 Extensions for Collective Processing of Shipments
V56SLDET Shipment processing: Leg determination
V56TDLIF Filter Delivery Items for Shipment
V56UCHCH Shipment processing: Check whether changes were made
V56UCHCO Check shipments are complete
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UNUMB Shipment number allocation
V56USTAT User-individual definition of transportation planning status
V56USVDO Update new objects for transport
V56USVDP Preparation for updating new objects for transport?
Best Regards,
Erwan -
User Exit for Planned Shipment in APO
Hi,
Pls let me know, if you know the user exit which triggers when a planned shipment is deleted in APO.
Thanks,
KumarHi,
You can try the following BAdIs:
You can use the Business Add-In (BAdI) MD_PLDORD_CHANGE to change, before posting, data from planned orders, which have been created, changed, or deleted as a result of planning a material or manual processing.
The Business Add-In allows you to fill and change fields from planned orders in the PLAF table. It also supports filling of customer-specific fields in the customer include CI_PLAFDB.
You can execute the Business Add-In in the planning run in the following areas:
Material requirements planning
Master production planning
Long-term planning
You can also carry out the Business Add-In in all applications, which execute manual planned order changes. Examples of this kind of application are:
The dialog transactions for creating and changing planned orders (MD11, MD12, MS11, MS12)
The Business Application Programming Interfaces (BAPI) for creating and changing planned orders
Regards,
R.Brahmankar -
User Exit For Printing in FB50
Hi
Please can someone give me a user exit for transaction FB50, the user exit needs to be late in the process/transaction and I want to be able to see the data and print it. Going to do printing through abap.
Basically I want to trigger automatic printing for the transaction.
Thanks in advanceu can implement this user exit RFKORIEX , which allows automatic printing.
steps to implement:
go to CMOD: create a project with name: Z_Print.
and clikc on enahncement assignment and assign 'RFKORIEX' .
and click on components.
again double clikc on fun. exit: EXIT_RFKORIEX_001
then u can able to see INCLUDE ZXFKOU01.
click double click on ZXFKOU01.
write the foll. code:
e_FINAA-NACHA = assign value of tranmission type/medium
activate it...
come back to projectand activate the entire project...
please ensure that the component 'RFKORIEX' should not be used by any other program. if its used by any other program, deactive that project. -
User exit for VT01n (Creation of shipment)
Hii All
We have a requirement where we have to automatically enter the planned shipment scheduled time & end time and date for each stage while saving the shipment.
Can anyone let me know user exit which can be used to do the same.
Thanks & Regards
GauravHi,
You can use V56FSTAT this user exit for your purpose..
If you want more selection of user exits you goto transaction SMOD and input V56* and then press F4,so that you can see all the user exits can be used for shipment or transportation purpose...
Regards,
Chandra -
User exit for VF01(after g/l account is determined).
I have requirement in which i have to throw an error message in VF01
In this i need a user exit in which i can access the G/L account number and on basis of that i need to display error message.But i am not able to find out a user exit where i can access g/l account determined by sap std code.
The requirement is to put a validation on WBS element based on G/l account and stop billing document creation in addition to accounting doc creation.hi ,
Exit Name Description
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
check these exits..
regards,
venkat. -
BADI / User exit for Purchase order(ME21N) after saving the document
Hi expert,
I need the BADI / User exit for Purchase order(ME21N) after saving the document
This is for email sending after create the purchase order so PO document number will be the import parameter
pls help me
point will be reward
Regards,
GaneshHi Ganesh,
Could you please share your solution?
Thanks.
Hoops
Edited by: Hoops on Jun 13, 2011 10:51 PM -
User exit for FB60 after POSTING the Document.
Hi,
I have requirement with FB60 transaction where i have to display the error message to the user if the amount of the invoice is greater than some threshold value( this will be maintained in the custom table) to park the document .
I have created project with enhancement SAPLF051 using the exit EXIT_SAPLF051_002 it is triggering only when parks the document .
But my requirement is i need an enhancement which trigger after user posts the document.
Please help me...
regards
paveee.....Hi
Following are the available user exits for fb60 transaction...
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not sen
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
If you still not find appropriate exit, go for badi's...
1)To search for a badi, go to se 24 display class cl_exithandler.
2) double click on method get_instance,
3) get a break point on case statement. execute and start the required transaction in new session.
4)look for variable exit_name. It would show the available badi's.
<b>Please do reward if useful</b>
Regards
Dinesh -
User exit for ML81N after SAVE
I need a User exit for Service Entry Sheet change after the user has Saved the release. I need to update a customized "Z" table when a Service Entry is released from ML81N. I need to ensure the Service Entry is saved with release status. The user-exits such as SRVESSR are triggered during creation of the Service Entry but not after Save. For e.g. if I used that exit to update my Z table, the Service Entry release may not have actually saved (say due to some error), but my Z table would have been updated. Is there a solution for such a requirement?? I saw some previous threads similar in request, asking for a User exit after SAVE, but it seemed to relate to WorkFlow.
hi ...
try to use MB_CF001 exit ....
The enhancement MB_CF001 includes a function module that is called up
immediately before the COMMIT WORK when a goods movement is posted.
All the material document data is passed on to this function module from
the following tables:
o MKPF (Material document header)
o MSEG (Material document items)
o VM07M (Update data)
This data can be passed on to other programs.
Note
The enhancement does not write any data to the material document, that
is, it is not possible to change material document data before the
update posting takes place. -
User-exit for deletion of line item in PO
hi group
i want to delete a line item of purchase order.
and after that i have to make some changes
so i want to know which user-exit will be used here.
please help its urgent.Hi,
Please fine the list of user exits for the transaction ME22.
If it serves your purpsoe , please close the thread and reward suitable points.
Regards,
Irfan Hussain
Transaction Code - ME22 Change Purchase Order
Exit Name
Description
AMPL0001
User subscreen for additional data on AMPL
LMEDR001
Enhancements to print program
LMELA002
Adopt batch no. from shipping notification when posting a GR
LMELA010
Inbound shipping notification: Transfer item data from IDOC
LMEQR001
User exit for source determination
M06B0001
Role determination for purchase requisition release
M06B0002
Changes to comm. structure for purchase requisition release
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to comm. structure for overall release of requisn.
M06E0004
Changes to communication structure for release purch. doc.
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requsitions for PO split in ME59
MEETA001
Define schedule line type (backlog, immed. req., preview)
MEFLD004
Determine earliest delivery date f. check w. GR (only PO)
MELAB001
Gen. forecast delivery schedules: Transfer schedule implem.
MEVME001
WE default quantity calc. and over/ underdelivery tolerance
MM06E001
User exits for EDI inbound and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control import data screens in purchase order
MM06E005
Customer fields in purchasing document
MM06E007
Change document for requisitions upon conversion into PO
MM06E008
Monitoring of contr. target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MMAL0001
ALE source list distribution: Outbound processing
MMAL0002
ALE source list distribution: Inbound processing
MMAL0003
ALE purcasing info record distribution: Outbound processing
MMAL0004
ALE purchasing info record distribution: Inbound processing
MMDA0001
Default delivery addresses
MMFAB001
User exit for generation of release order
LWSUS001
Customer-Specific Supply Source Determination in Retail
MRFLB001
Control Items in Release Creation
No of Exits: 33 -
BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N
Hi,
I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
Please could anyone help me with this .
Regards,
Sushanth H.S.Hi!
User Exits in Transportation
In Transportation, there are enhancements that you can use with transaction CMOD.
For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
Business Add-Ins in the transports
Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
Customer-specific functions can be executed before the save time and after the database update.
The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
IN_UPDATE: BADI is called up after the database update.
Standard Settings
Creating a BADI method:
Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
Afterwards, go to the heading and activate the interface.
Regards
Tamá
Maybe you are looking for
-
lost iphone and itunes, cant get data back on new phone.
-
Video podcast is showing in the store but not downloading or streaming
I've been able to upload the video podcast (~345MB, 50 minutes, 480x272, .m4v) and it will appear in iTunes, but when clicked to download there is no file downloading. It says the length is 0:00. We've tried everything to get this to work and it seem
-
Error while signing jacob.jar in FMW 11g
Hi, after setting the PATH like: set PATH=C:\Programme\ORACLE11g\Oracle\Middleware\PFRD11g\jdk\bin;%PATH% while signing the jacob.jar file for the first time after installing 11g Forms in Windows the following error occurs: C:\Dokumente und Einstellu
-
[size="2" face="Verdana">I've had my zen micro for about a year, because I got it last Christmas. I've listened to it frequently since I first got it. Just recently, I have come very close to filling up my memory. But I guess I am using too much memo
-
Image size and Color Adjustments
I know for sharpening purposes, it's best to sharpen an image the size it is going to print. But is the same true for white balance/color corrections, contrast and tonal adjustments?