User exit problem

Hi,
My requirement is to stop deletion of infotype 2001 record for some specific users. I am not able to achieve this through authorization, as through authorization if a user is given create access automatically he gets modify and delete access.
So, I have tried EXIT_SAPFP50M_002 user exit from PBAS0001 enhancement.
The problem with this user exit is that it is triggered for all infotypes. Since I want this to execute for only infotype 2001 and not for all infotypes in PA30. Anyone have an idea how to achieve this.
Following is my code in exit:
Case sy-ucomm.
When 'UPDL'.
Message 'Record cannot be deleted.' Type 'E'.
EndCase.
Thanks,
Waqas Rashid
Moderator message: please use more descriptive subject lines for your posts.
Edited by: Thomas Zloch on Jan 26, 2011 3:48 PM

Hi,
Try this.
CASE INNNN-INFTY.
WHEN '2001'.
"Your code comes here.
ENDCASE.
Regards,
Jovito

Similar Messages

Sales Order Pricing User Exit Problem

Hi,
I am facing a problem related to coding in Sales Order pricing user exits. Scenario is as mentioned below:
Based on Material Entered and Sold To in Sales Order, auto determination of a manual pricing condition happens. For doing this, coding has been done in USEREXIT_PRICING_PREPARE_TKOMP by changing XKOMV table. Auto determination of the manual price is happening properly.
From Sales Overview Screen when user goes to the Conditions tab, Net Value is not getting calculated. When we navigate away to Schedule line tab and then come back to COnditions tab, Net Value is automatically getting calculated.
AM i missing something in the coding part? As the data is getting populated automatically I guess some piece of code needs to be triggered. Can anyone shed some light into this.
Thanks in advance,
thunderans.

Prabhu: After filling in XKOMV structure, I am calling FM PRICING. On doing this, the Sales Pricing is getting calculated but even then net value of order at header i.e VBAK-NETWR is not getting populated when we are in Sales Overview screen. When, I am getting into Conditions tab and coming back to Sales Overview screen, Net value is getting populated correctly. This portion of everything not getting populated at the same time is bothering me. The pricing conditon that I am filling is a manual pricing condition.
I put a breakpoint after FM PRICING which correctly populates XKOMV structure. How do I properly update Order Net Value in Sales Overview screen wihtout having to navigate to any other tab?
Nicklas: I am looping at Order line within the user exit USEREXIT_PRICING_PREPARE_TKOMP and determining price. Once all line items are processed, I am using the FM PRICING for calculating Sales Prices.
J@Y: Request to send me a bit more details into your approach.

User Exit Problem in Sales Order

Hello All,
This problem is related to Sales Order.I want the system to forcibly consider another line item and calculate its pricing while saving the sales order at the last moment.
For Example in the sales order I am giving 1st Line Item Material A of quantity 10 and Unit of Measurement BT (Bottle).Then when I am pressing the save button I want the User Exit of Material B as 2nd line item to be populated at that very moment which will be forcibly included and pricing will be calculated in that sales order.The user exit should work at this level.
Now considering the above scenario please suggest solutions in SD / ABAP regarding the successful running of User Exit in the Sales Order are required to attain my requirement.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka

Hi priyanka,
though ur requirement is a bit complex i suggest userexits in this kind of scenarios wont help..rather an additonal program needs to be inserted in the standard sales order program..but for ur reference i am sending the list of all the user exits used in price determination. and the requirements fullfilled by them.... .hope it may help u....and cater to ur requirements....
User Exits For Price Determination
u2022     USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ)
This user exit allows you to copy additional fields for pricing in the TKOMK communication structure (header fields), which have not been provided in the standard SAP system. These fields can also be used for pricing in the billing document.
This user exit is described in detail in the "New fields in pricing" section.
u2022     USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
This user exit allows you to copy additional fields for pricing in the TKOMP communication structure (item fields), which have not been provided in the standard SAP system. These fields can also be used for pricing.
This user exit is described in detail in the "New fields in pricing" section.
u2022     USEREXIT_FIELD_MODIFICATION (module pool SAPMV61A, program MV61AFZA)
You can use this user exit to adjust the display of individual lines in the condition screen by changing the display attributes of the screen fields. This does not include the display of subtotals.
This user exit is also used in order processing.
u2022     USEREXIT_FIELD_MODIFIC_KZWI (module pool SAPMV61A, program MV61AFZB)
You can change the display of subtotals in the condition screen by changing the display attributes of the screen fields.
This user exit is also used in order processing.
u2022     USEREXIT_FIELD_MODIFIC_KOPF (module pool SAPMV61A, program MV61AFZB)
You can adjust the display of subtotals in the condition screen to your requirements by changing the display attributes of the screen fields.
This user exit is also used in order processing.
u2022     USEREXIT_FIELD_MODIFIC_LEER (module pool SAPMV61A, program MV61AFZB)
You can adjust the display of blank lines in the condition screen to your requirements by changing the display attributes of the screen fields.
This user exit is also used in order processing.
u2022     USEREXIT_PRICING_CHECK (module pool SAPMV61, program MV61AFZA)
You can install additional checks to the standard checks of condition lines (e.g. maximum/minimum value).
u2022     USEREXIT_PRICING_RULE (module pool SAPLV61A, program RV61AFZA)
In the standard SAP system, it is predefined which condition categories and classes can be copied or recalculated per pricing type. You can change the predefined standard procedure for each pricing type.
u2022     USEREXIT_CHANGE_PRICING_RULE (module pool SAPMV61A, program MV61AFZA)
You can use this user exit to change the pricing type that has been predefined in the copying control table in billing.
u2022     USEREXIT_XKOMV_BEWERTEN_INIT (module pool SAPLV61A, program RV61AFZB)
This field is used in the formulas and therefore initialized before the loop for the pricing procedure starts.
u2022     USEREXIT_XKOMV_BEWERTEN_END (module pool SAPLV61A, program RV61AFZB)
Within a loop for the price components during pricing, specific values can be transferred into the communication structures in pricing to be further processed.
u2022     USEREXIT_XKOMV_ERGAENZEN (module pool SAPLV61A, program RV61AFZB)
In change mode, you can change the dynamic part of the condition record (KONVD) that is always redetermined (i.e. it is not stored in database table KONV).
u2022     USEREXIT_XKOMV_ERGAENZEN_MANU (module pool SAPLV61A, program RV61AFZB)
You can use this user exit to change the ready-for-input fields of the manually entered condition record in add mode in the condition screen.
u2022     USEREXIT_XKOMV_FUELLEN (module pool SAPLV61A, program RV61AFZB)
This user exit is always called up during a redetermination of all or individual price components. You can change the work fields of the condition line. However, this only applies to conditions that have been determined via a condition record.
u2022     USEREXIT_XKOMV_FUELLEN_O_KONP (module pool SAPLV61A, program RV61AFZB)
This user exit is always called up during a redetermination of all or individual price components. You can change the work fields of the condition line. However, this only applies to conditions that have been determined via a condition record. This may include subtotals, manually entered conditions or conditions that have been calculated with a formula.
u2022     USEREXIT_PRICING_COPY (module pool SAPLV61A, program RV61AFZA)
You can change the KONV fields for copied price components.

In VF02 User exit problem.

Hi All,
I Done enhancement for VF02 transation to update data into one custom tablem,every thing working fine,but problem is when user click flag button in VF02 this user exit will get trigger by that time posting status is 'A'(means not been posted)I required status 'C'(Posted) but I am getting all data to my Custom table except this,pls help me out..
Thanks n regds,
Sree.

Hi All,
My user exit triggering when SY-UCOM = ' FKFR'.(When I cllick flag)
and it is comming out side of the transaction and throwing message Invoice saved actually my user exit should trigger here,if I go once again inside and click save button User exit triggering and chaging the posting status,how can i solve this problem Is I need to put any condition for this,rigth now I am using like below
IF SY-TCODE   = 'VA02'
     and sy-ucomm = 'SICH'.
CALL FUNCTION 'ZSALES_DATA_UPDATE'
EXPORTING
    IT_VBELN          = vbrk-vbeln          .
endif.
Thanks n regds,
Sree.

MEREQ001 User Exit Problem for ALV Columns.

Hello,
I am using this user exit to make changes to the Purchase requisition enjoy transaction. There is an ALV used for item details and if you use the customer CI_EBANDB include in EBAN table you can see those fields available in the alv and you can add them up using change layout.
To make these fields editable as they remain in display always inspite of the fact that you use ME51n or ME52n.
MM --> Purchasing --> Purchase Req -->Define Scree Layout at document level.
is the configuration required as per a previous mail thread in the forum. However when i go to spro i am not able to see those new fields which i have added for KEY FIELD selection. Am i missing something or has anybody before done this... Could anybody guide me with the step by step process.
Regards,
Shekhar Kulkarni

Hello,
In 46C, I checked and found no user exits / BADIs for your requirement. If you are very keen of this feature, may be that you have to modify the SAP standard. Not a good option.
Regards, Murugesh AS

Free Goods Problem and User Exit if needed in Sales Order

Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka Mitra

Hello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks.

Me23n user exit dynpro problem

Hello Everybody,
I'm developing a user exit for me23n transaction. I have added a tab in which i have some fields i want to fill, but i'm having the next problem.
when i enter in the me23n transaction, i push the edit button and those fields appear on editable state, but when i modify the values and push save the fields the fields continue in editable state.
I have tried to solve this problem in the catching the MESAVE action in the pai of the me22 and calling leaving to the transaction me23 with the vnew values but it's not working. Any ideas?
Here is the source code ( dynpro 111)
process after input.
field ekpo_ci-zzref_alb.
field ekpo_ci-ZZFECH_DES.
field ekpo_ci-zzeqveh.
field ekpo_ci-zzmatricula.
field ekpo_ci-zzeqtar.
field ekpo_ci-zztarjeta.
field ekpo_ci-ZZCENTRO_SER.
field ekpo_ci-ZZREF_FACT.
field ekpo_ci-ZZCLIENTE.
field ekpo_ci-ZZPAIS.
field ekpo_ci-zzdoc.
module user_command_0111.
module USER_COMMAND_0111 input.
if sy-tcode = 'ME23N' and sy-ucomm = 'METOGG'.
leave to transaction 'ME22N'.
endif.
if sy-tcode = 'ME22N' and sy-ucomm = 'METOGG'.
leave to transaction 'ME23N'.
endif.
if sy-tcode = 'ME22N' and sy-ucomm = 'MESAVE'.
sy-ucomm = 'METOGG'.
leave to transaction 'ME23N'.
endif.
Thanx

Hi,
Check the code below:
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = '0001'
language = sy-langu
name = sname "sales doc is given here
object = 'VBBK'
TABLES
lines = tlines.
if not tlines is initial.
LOOP AT tlines.
CASE sy-tabix.
WHEN 1.
ztable-field1 = tlines-tdline.
WHEN 2.
ztable-field2 = tlines-tdline.
WHEN 3.
ztable-field3 = tlines-tdline.
ENDLOOP.
UPDATE ztable SET field1= ztable-field1
field2= ztable-field2
field3 = ztable-field3
WHERE vbeln = vbak-vbeln.
ENDIF.
endif.
Regards
Kannaiah

User exit needed (Problem related to duplicate batch entry in Migo(GR))

Dear all,
              I need a help from you.we facing problem in Goods receipt in MIGO.
where we want to apply a check on batch which has already been assigned to a raw material in MIGO .we are using manual
batch entry .we don't want to make duplicate entry of same batch
against any material.
I tried to find out the user exit for that but i have not succeed .
what is solution to
avoid duplicate batch entry.

Transaction Code - MIGO                     Goods Movement
Exit Name           Description
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
No of Exits:          8
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

User Exit related problem

I have created one user exit for transaction CO02 .We acn navigate on different screens . My user exit works when you click on save button .
But now problem is when you click on save button of on different screen first time it wont work . But if you go to main screen of CO02 and return back to other screen it works what may be the reason .
thank you in advance .

hi ragha,
it is because the exit u used is allocated for a particular transaction..
check it in SMOD .. give the exit name to see the documentation..
thats the reason it doesn't work in the other screens..
reward if useful..
Message was edited by: Ashok Kumar Prithiviraj

Problem in triggering the code for CO02 User Exit

Hi,
I am using the code for the Tcode CO02 (User Exit) and i am facing a problem that when i am using the code as a normal program it is executing fine and displaying the pop up window and showing the data in it.
But when i am using that code in the USER EXIT code it is not trigerring that pop up window.
I am using the enhancement:-
*PPCO0007 * - Exit when saving production order
And the include in which i am writing the code is :-
INCLUDE ZXCO1U06
plzz provide me guidelines for solving this problem.

hi ,
i am using the following: -
Enhancement No. -> PPCO0007 (Exit when saving production order)
When i click on the enhancement the following is displayed:-
Function exit -> *EXIT_SAPLCOZV_001 *
When i double click the function exit the code i had written in the following include:-
INCLUDE ZXCO1U06
plzz tell me whether i am doing it right or worng?

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Numeric value variable problem with user exit

Dear experts,
I've created a variable (numeric value, user exit) and I want to get the value of variable from an user exit.
Actually, I want to convert "0calyear" to a number to be albe to calculate (multiplying, dividing etc).
If there is a possible solution only in FOX, the solution will be the best. However I couldn't find anything.
So, the next solution I am trying is user-exit. But I am in stuck here.
The problem is that I have no idea whether the numeric value variable has any sturcture like other variables(char. value) or not. If yes, what structure it has?
I know, the characterisc value variables have the structure as blow,
 ls_varsel-chanm =
 ls_varsel-seqno =
 ls_varsel-sign =
 ls_varsel-opt =
 ls_varsel-low =
I've tried several times with the same way like above, but it doesn't work when I call the variable in "BPS0" or "UPSPL".
How can I solve it? Please let me know.
I am using SEM_BW 4.00.
Many Thanks.
Bruce

Hi Ravi,
Sorry, there's a correction. var2 is used for getting the first month of the year selected by the user in var1. If the user doesn't enter a value for var1, then var2 should take first month of current year from var1 which has by default last month of current year (populated in i_step1 from sy-datum). The user can select the value of var1 according to his requirement. Then var 2 should get first month of the year selected. That's why I'm using two exit variables.
It works fine during the initial run of the query. But when the user clicks on the variable button in the toolbar and executes the query, var1 is not being displayed and an error message No value could be determined for var2 is shown. All other variables used in the query are displayed except var1.
Krzys, Is the option Can be changed in Query Navigation available for Exit variables. I'll check that and get back to you.
Boujema, Thanks for the OSS note.
Thanks
Hari

EDI - IDoc - User Exit - Code - Problem - Help - Wanted

Hi EDI Experts,
I have extended ORDERS05 IDOC twice.
ZVKSEG1 is the the segment under extended idoc ZVKORDRS05. This is for one partner.
Z1DATESH01 is the segment under extended idoc Z1ORDER05. This is for another partner.
I have completed the configuration thing in WE82 for both the extensions.
Now the requirement is, whenever a PO is created for the first partner - 100290, the IDoc generated should contain the extra segment ZVKSEG1 and whenever PO is created for the second partner - 10099,the Idoc generated should contain the extrasegment Z1DATESH01.
Using WE20, i have added the extended IDoc type in both the partner profiles under ORDERS message type.
Now i've written the user exit for this using EXIT_SAPLEINM_002.
tables: edidc.
data: z_edidd like edidd occurs 0 with header line.
data: y1dath01 like z1datesh01.
data: yvkseg1 like zvkseg1.
if edidc-rcvprn = '10099'.
z_edidd[] = int_edidd[].
loop at z_edidd.
if z_edidd-segnam = 'E1EDK01'.
read table z_edidd with key segnam = 'Z1DATESH01'.
if sy-subrc <> 0.
y1dath01-DELDATE = sy-datum.
clear z_edidd.
z_Edidd-sdata = y1dath01.
z_Edidd-segnam = 'Z1DATESH01'.
append z_edidd.
endif.
endif.
endloop.
int_edidd[] = z_edidd[].
elseif edidc-rcvprn = '100290'.
z_edidd[] = int_edidd[].
loop at z_edidd.
if z_edidd-segnam = 'E1EDK01'.
read table z_edidd with key segnam = 'ZVKSEG1'.
if sy-subrc <> 0.
yvkseg1-name1 = 'ZVK Chemicals'.
clear z_edidd.
z_Edidd-sdata = yvkseg1.
z_Edidd-segnam = 'ZVKSEG1'.
append z_edidd.
endif.
endif.
endloop.
int_edidd[] = z_edidd[].
endif.
Could you please go through the code and tell me where did i go wrong. The extra segments are not being created for both the partners.
I created PO using ME21n once for each vendor.
Please help me out guys.
Thanks,
Matt

I myself fixed this problem. I made use of XLFA1-LIFNR to manipulate the partner numbers.
Thanks

Problem with User Exit parameter in MD01

I have done the coding for user exit in MD01. But the exit is not being triggered even when the exit key is specified in the selection screen of the transaction.
I need to control the material being planned and restrict it to type ROH only.
Please help me... I need to do this fast

Hi Sultana,
The user exit key is stored in table T450U. But the user exit parameter is not stored. Instead, it is entered in the selection screen of MD01.
Also, You can check the following Transaction codes if they help you to solve yor problem:
MD20 - Create planning file entry
MD21 - Display planning file entry
MDAB - Set up planning file entry in background
MDRE - Check planning file entry
Hope it helps.

Coding problem in a user exit for unit conversion please see it once

Hi experts,
 i am having a problem in coding i wont to convert the MSEG-ERFME field that is quantity field into tonne when ever it is kg. In tcode j1i5 i got one user exit J_1i7_userexit_validate now inside this user exit i have to write this code that when ever the UOM(unit of measure)ERFME comes in KG it should be converted into TONNE, This code is to be written in the user exit and has to be followed forward in other values.
Thanks
sumeet Malhotra

Hi Experts,
 Have any one used this Function module unit_conversion_simple please help Not getting any reply since tmmrow,I am not able to get the desired output wont to convert all KG inputs into Tonne.
this is the code part
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
 EXPORTING
 INPUT = ERFMG " QUANTITY
 NO_TYPE_CHECK = 'X'
 ROUND_SIGN = ' '
 UNIT_IN = ERFME " ORIGINAL UOM WHICH EXIST
 UNIT_OUT = 'TO' " UOM REQUIRED
IMPORTING
 ADD_CONST =
 DECIMALS =
 DENOMINATOR = 1000
 NUMERATOR =
 OUTPUT = RESULT "OUTPUT
EXCEPTIONS
 CONVERSION_NOT_FOUND = 1
 DIVISION_BY_ZERO = 2
 INPUT_INVALID = 3
 OUTPUT_INVALID = 4
 OVERFLOW = 5
 TYPE_INVALID = 6
 UNITS_MISSING = 7
 UNIT_IN_NOT_FOUND = 8
 UNIT_OUT_NOT_FOUND = 9
 OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please help
Thanks
Edited by: sumeet malhotra on Feb 7, 2009 5:46 AM

User exit problem

Similar Messages

Maybe you are looking for