User Exit to do the ICBilling (ZIV) before PGI & CustomerBilling (ZF1)

Hi All,
There is business Requirement to do the IC Billing (ZIV) before PGI and Customer Billing (ZF1).To achieve the same , we have tried implementing OSS Note 38501 in User Exit "EXIT_SAPLV05I_003" but this user exit is getting hit only after PGI and its not feeding the purpose as we want it before PGI. Can anybody please tell me the User Exit which triggers before PGI Or any other solution to feed the purpose.
Edited by: Ruchi P. on Nov 4, 2009 1:02 PM

If my understanding correct Before you send inbound delivery information to third party system you will send one Flag to Third party system to do goods receipt.I have one question if system failed to create /user cancelled Outbound delivery then how will you stop auto goods receipt in Third party system ?.Also After goods receipt GR messages failed in sap as there is no ASN created in system.
If you want to send the flag before ASN creation then at Speed message level you split the Idoc message into two parts one for flag the message two third party system and another one to create Inbound delivery.

Similar Messages

How can i do a variable User exit that present the values before execute

Hi Gurus,
How can i do a variable User exit that present the values before execute, i need this:
a variable that calculate SYS-DATUM until 30 days before (I got the code) but this variable run automatic because is user exit, i want this variable but first present the values, not execute automatic, this is because the users want the report that automatic present the values , help

Hi,
Refer the below links,
http://documentation.softwareag.com/natural/nat424mf/pdf/ops_mf/conf_usrex.pdf
http://www.erpgenie.com/component/content/article/1097
http://www.apentia-online.at/UP/Apentia/files/Article/SAP_BW_User_Exits_and_BAdIs.pdf
Hope it helps you,
Regards,
Ravindra.

BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

Hi,
I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
Please could anyone help me with this .
Regards,
Sushanth H.S.

Hi!
User Exits in Transportation
In Transportation, there are enhancements that you can use with transaction CMOD.
For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
Business Add-Ins in the transports
Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
Customer-specific functions can be executed before the save time and after the database update.
The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
IN_UPDATE: BADI is called up after the database update.
Standard Settings
Creating a BADI method:
Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
Afterwards, go to the heading and activate the interface.
Regards
Tamá

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

User exit upon saving the customer

Hi
can any one tell me what user exit is triggered upon saving the customer in XD01,XD02,VD01 & VD02 Tcodes.
Thanks
Sonali

Hi sonali
Check these user exits which are used at partner determination level. May be this inputs will help you
EXIT_SAPLV09A_001
You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address should be created (duplicated).
EXIT_SAPLV09A_002
Call up this user exit if a customer has not been maintained in the current sales area.
EXIT_SAPLV09A_003
Use this user exit to control the origin of partners in the partner determination procedure (origin X, Y or Z). If X, Y, or Z has been entered in the Origin field, this user exit is automatically called up during partner determination.
EXIT_SAPLV09A_004
Use this user exit to integrate your own check in a program that runs before the partner is saved in the document.
For more detailed information, see the program documentation for each of the user exits
Regards
Srinath

User Exit to stop the creation of PO

Dear All,
I have a typical problem , we have 2 servers both running on ECC 6.0.
I tried creating a PO and I kept a break point in the exit EXIT_SAPMM06E_013 (INCLUDE ZXM06U44 ) in server1 and the control stops here and I can check all the values from the table EKKO .
I implemented my user exit in server 2 in the same exit EXIT_SAPMM06E_013 (INCLUDE ZXM06U44 ) , when I tried to debug , I was suprised to see that the control never comes in this FM EXIT_SAPMM06E_013 , but server 1 and server 2 are both ECC6.0
Is there any customization which I had to check from my end , so that the control can go through this user exit.
Even if I don't implement this user exit , shouldn't the flow be going the way it was in server 1 ( I mean control going through EXIT_SAPMM06E_013 (INCLUDE ZXM06U44 ) Kindly advise..
Best Regards,
Srinivas Gummadi.

Hi Srinivas,
You need to create a project in CMOD and assign the enhancement to the project.
The project should be activated otherwise the user exit will not be triggered.
Regards,
Vinod

User exit to copy the data from sales order to billing document

hi everyone,
Is there an user exit to copy the data from sales order to billing document?
Regards
Prabudh

hi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..

Program/User exit to maintain the number ranges at plant level

Hi Everybody,
Could u please tell me program/user exit to maintain the number ranges at plant level.
Thanks & Regards,
Piyush

Hi
Do you want to maintain all the number range Objects
For Material Master you can use the enhancement MGA00002
For PO Nu,ber ranges you can use the enhancement MM06E003
Thanks & Regards
Kishore

Badi and user exit active at the same time ?

Hi All,
Please let me know whether
1> I can have a BADI and a user exit both active at the same time for the same enhancement?
2> I can have a BADI and a user exit both active at the same time but they are for different purpose.
    eg: BADI       -- > to change statistical date of po item line on ME21N screen
          User Exit -- > to change the exchange rate on PO header on me21n screen
Please response to the second point... as this is what I am working on.
Regards,
Shital

Hello,
Thanks for your response.This is my code.
                         WSA_header = IM_HEADER->GET_DATA( ).
                          wsa_header-wkurs = '0.6668'.
                       CALL METHOD im_header->set_data
                            EXPORTING
                                   im_data = wsa_header.
Kind Regards,
Shital

How to find user exit implemented in the program

how to find user exit implemented in the program or standerd transaction

try this program to get the list of all the user exits for a transaction...
*& Report Z_USER_EXIT                                                 *
*REPORT Z_USER_EXIT                             .
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
           tadir,    "Directory of Repository Objects
           modsapt, "SAP Enhancements - Short Texts
           modact,   "Modifications
           trdir,    "System table TRDIR
           tfdir,    "Function Module
           enlfdir, "Additional Attributes for Function Modules
           tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
    SELECT SINGLE * FROM tstc
      WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir
         WHERE pgmid    = 'R3TR'
           AND object   = 'PROG'
           AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir
           WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir
            WHERE pgmid    = 'R3TR'
              AND object   = 'FUGR'
              AND obj_name = enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
Find SAP Modifactions
      SELECT * FROM tadir
        INTO TABLE jtab
        WHERE pgmid    = 'R3TR'
          AND object   = 'SMOD'
          AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
          AND tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ',
      20(20) p_tcode,
      45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline,
        2 'Exit Name',
        21 sy-vline ,
        22 'Description',
        95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt
          WHERE sprsl = sy-langu AND
          name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline,
          2 jtab-obj_name HOTSPOT ON,
          21 sy-vline ,
          22 modsapt-modtext,
          95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

Is there any user exit to change the UOM of a material while creating sales

Hi experts,
I have a requirement to change the UOM of the item material in sales order while creating. Could anybody help me in finding the correct user-exit to change the UOM.
Thanks,
srinivas.

Hi Ravish,
I am already changing the UOM in the same include and in the subroutine "USEREXIT_MOVE_FIELD_TO_VBAP". But it is again over writing in the standard program. What I need to do, to remain same UOM.
Thanks,
srinivas.

Map the user exit variables with the queries/cubes using them

Hello Friends,
What are the post unicode conversion tests that you can perform on front end/existing queries?
is there any added advantage for queries due to unicode?
is testing the working of variable enough? is there any table to map the user exit variables with the queries/cubes using them?
Thanks
Tanya

Guys, any clue about this? Answer are appreciated.
Thanks
Tanya

User exit when saving the user profile

Hi All,
Is there any user exit exist which get triggered whenever any SAP user profile is saved.
Thanks in advance,
Harkamal

Hi harkamal,
<b>I dont think that any user exit is present for the code :SU01.</b>
If you want to check the user exit. please find the below code and execute in SE38 you will get the Userexit related to the TCode.
*& Report Z7CC_USEREXIT_TRANSACTION_CODE
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.

To find a user exit which update the Invoice header data

Hi,
I need a user exit which will update the invoice header data. For eg I need to update the fields RBKP_V-ESRNR and RBKP_V-ESRRE in table RBKP_V. I was using this user exit EXIT_SAPLMRMP_010 (Program ZXM08U16).But this is not working fine as this has no exporting parameter nor tables of structure RBKP_V.
I need for transaction MIRO.
Kindly help ...
Points will be rewarded
Thanks in advance

Hi jayasree,
with the help of the below given program you can find out the requried user exit by giving the T code (MIRO).
*& Report Z_USEREXIT_DISPLAY *
Title : Display UserExits *
Transport Request No : *
Modification Log *
ModNo Date Consultant Description of Change(s) *
REPORT z_userexit_temp
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
Regards
Srinivas

Need a user exit to modify the quantity schedules in a sales contract

Hi,
I am using ECC 6.0 with IS OIL. Need a user-exit to update the quantity schedule(table OIA05) in the sales contract VA42.
I have a new field called timestamp in the table OIA05 which needs to be updated with the timestamp value.
I tried the user exit MV45AFZZ in USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT to update the values. But the new values are not being reflected. Can you please help me in this regard.
Thanks,
Best regards,
Ajith

that will allow me to append an initial line with <accit> pointing to the line. Therefore I just have to modify <accit> and the new line will then have my changes?
Yep, that is exactly it. So after the APPEND statement, simply fill the fields of the <accit>.
append initial line to im_document-item ASSIGNING <accit>.
<accit>-field1 = 'Blah'.
<accit>-field2 = 'Blah'.
Regards,
Rich Heilman

User Exit to do the ICBilling (ZIV) before PGI & CustomerBilling (ZF1)

Similar Messages

Maybe you are looking for