User identification of reset document.

hello experts,
I needs your help. in fbl5n some line item were cleared yesterday but today when i again opened the particular customer ledger those line item  are showing in open item. i think those item are reset by any user. as  i am not able to identify the user id , i dont understand the reason for resetting the same.
please help me.
regards
konishko

Hi
You can identify the user who has reset the transaction by
1. FB03 - Document list - Give the entry date as yesterday (or the date you feel the clearing has been reset) and in dynamic selection choose transaction code and enter FBRA and execute. You wil get the list of documents reset on a particular day.
2. You can go to the corresponding document and click on Environment -> Document changes. The clearing document field will have old and new value if changed. With this you can identify the user who has reset the document.

Similar Messages

  • User exit for FI document

    Hi All,
    I need a user exit for FI document posting.
    My purpose is based on types of G/L accounts i need to add line item data to FI document.(i.e.,inserting into BSEG table )
    Can you please suggest me the user exir.
    Thanks and regards
    Praveen

    Transaction Code - FB01                     Post Document                                    
    Exit Name           Description                                                                               
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment                  
    F050S002            FIDCC1: Change IDoc/do not send                                         
    F050S003            FIDCC2: Change IDoc/do not send                                         
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send                
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document                 
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document                         
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change                  
    F180A001            Balance Sheet Adjustment                                                
    FARC0002            Additional Checks for Archiving MM Vendor Master Data                   
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text                  
    RFEPOS00            Line item display: Checking of selection conditions                     
    RFKORIEX            Automatic correspondence                                                
    SAPLF051            Workflow for FI (pre-capture, release for payment)                      
    If you know tcode then you can find out user exits associated with the same with the following code:
    *& Report  ZUSEREXIT                                                   *
    *& Finding the user-exits of a SAP transaction code                    *
    *& Enter the transaction code in which you are looking for the         *
    *& user-exit and it will list you the list of user-exits in the        *
    *& transaction code. Also a drill down is possible which will help you *
    *& to branch to SMOD.                                                  *
    REPORT zuserexit NO STANDARD PAGE HEADING.
    TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    TABLES : tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                       AND object = 'PROG'
                       AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                                      AND object = 'FUGR'
                                    AND obj_name EQ enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
      SELECT * FROM tadir INTO TABLE jtab
                    WHERE pgmid = 'R3TR'
                     AND object = 'SMOD'
                   AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu
                                  AND  tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ',
           20(20) p_tcode,
           45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline,
               2 'Exit Name',
              21 sy-vline ,
              22 'Description',
              95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt
                 WHERE sprsl = sy-langu AND
                        name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline,
                 2 jtab-obj_name HOTSPOT ON,
                21 sy-vline ,
                22 modsapt-modtext,
                95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
    *---End of Program.
    I hope it helps.
    Best Regards,
    Vibha
    *Please mark all the helpful answers

  • How do I remove or turn off "require user identification" feature in indesign CC 2014

    This keeps occurring as I'm editing copy in an indesign document. Something new and a huge problem, I can't locate it in preferences to turn it off. Has anyone else had this problem?

    And why is it a problem? This user identification is useful in some workflows, because it helps the InCopy user to know who is the assignment creator. If you do not need this information, just fill any name as John Doe if you wish or anyone else.

  • Dyanamic user identification of user

    I am new to sam but not to identity management.
    I need to have session time out for user based on the user attribute.I have created filtered role for it and configured session service and authenctication configuration.
    Problem:
    I have specify in the URL as loginurl?realm_name=<realm name>&rolename=<rolename> for the specific session configuration to apply?
    My question is why do i need to specify the user role in the urt why is access manager not identify on its own the user apply the session configuration.
    Is there a configuration which make sure that user role session configuration is automatically picked up and applied.
    Awaiting a reply?

    Hi
    You can identify the user who has reset the transaction by
    1. FB03 - Document list - Give the entry date as yesterday (or the date you feel the clearing has been reset) and in dynamic selection choose transaction code and enter FBRA and execute. You wil get the list of documents reset on a particular day.
    2. You can go to the corresponding document and click on Environment -> Document changes. The clearing document field will have old and new value if changed. With this you can identify the user who has reset the document.

  • Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

    Error on load: System.IO.IOException: The process cannot access the file
    '\\server1\SCANSHARED\.pdf' because it is being used by another process.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
       at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
    I faced this  error in event viewer  when users want to view documents from this third party deployed scan solution
    here I have two WFS servers  and they configured with load balancing in F5 .
    when I enable both servers in F5 I receive this error messages in 2nd server,
    when users want to view documents
    adil

    Do you have antiVirus installed on the sharepoint servers?
    These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
    are uploaded.
    Please follow this KB and exclude the folders from Scanning.
    http://support.microsoft.com/kb/952167
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • In FBL5N report user wants the sales document number to be displayed,

    HI, Guys
    Need ur help to sort out the problem
    In FBL5N report user wants the sales document number to be displayed,
    but the sales ducument number column is coming blank and this needs to pick from VBRP table
    As I discussed with Abaper, he reqiures a key field which common in BSEG abd VBRP table
    So,Please guide me in approaching the right way
    Munender

    Hi,
        Speak with your SD consultant. They can set up the copy control in SD so that the sales order is populated in the invoice in field ZUONR (Assignment).This will then copy to the assignment field in accounting.
    Alternatively you can use an exit to populate another field during the Posting.
    Kind regards

  • How can 2 user edit 1 word document at the same time

    hi,
    in office 2013 professional plus, can 2 user edit 1 word document at the same time?

    Hi,
    As far as I know, multiple users can not edit Word file in the same time directly. Could you give me your demand?
    Please check the two follows workarounds if they are helpful:
    http://blogs.msdn.com/b/johnmullinax/archive/2010/04/19/co-authoring-how-two-people-can-edit-one-word-2010-doc-at-the-same-time.aspx?Redirected=true
    http://www.ehow.com/how_7229904_allow-word-document-same-time.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Regards,
    George Zhao
    TechNet Community Support
    Hi
    thank you; its worked.
    I'm so excited about this; thank you again.

  • User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

    I am in the final stages of a cross-forest migration.  Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest.  User accounts were not migrated.  The accounts in use have always
    been in the "new" forest.  One of our challenges was the large volume of data in redirected folders.  I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
    the entire users share, copying the permissions with the files.  By doing incremental robocopies, we can get a final copy done now in about six hours.  The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
    change the folder redirection policy Documents path from
    \\oldserver\users\%USERNAME% to
    \\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder.  Everything was going well until I tested the policy change.  After the folder redirection policy is updated
    and applied, the user cannot access the private Documents folder.  For example, user Chester Tester logs on as ctester.  I open Windows Explorer and click the Documents shortcut.  I see one subfolder, which is subfolder of Public Documents. 
    So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error.  Now for the kicker, if I open another Windows Explorer window and edit the address bar to
    \\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
    I'm hoping this is something really simple to fix!
    TIA

    HI Vivian,
    Thank you for your reply.  Yes, the path in Group Policy Folder Redirection Root Path was updated to
    \\NEWSERVER\users.  I had planned to point this to the distributed file system, so the first used was actually
    \\domain\dfs\users.  To simplify things I have backed off to copying to just a normal share
    \\newserver\users. 
    We are using BASIC folder redirection and we create a folder for each user under the root path. 
    We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times  (or higher) after the policy is changed.
    Grant the User exclusive right to Documents - Disabled
    Move the contents of Documents to the new location - Disabled
    Related folder settings
    Video - Follow Documents
    Music - Follow Documents
    Pictures - Follow Documents
    Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server.  The redirected Documents points to an empty folder set.  The copied folders with all user
    data are there, but folder redirection refuses to recognize the original folder.
    I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name.  For now, I just want the redirection to move from the old server to the new server properly.  I deleted
    the new My Documents folder, rebooted the user's workstation and tried again.  The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server.  The environment
    has about 1500 users with approximately 1.3TB of data in the redirected Documents folders.  OUCH!

  • Resetting Document  ? ? ? ? ?

    Dear All,
    Experts,
    Can any one tell me what is Resetting the document ? And what is Resetting the cleared document ?
    Please explain in detail.
    Thanks in advance !
    Regards,
    Sharvari.

    Hi,
    Reset Document and reset the clearing document these two are used only to reset the payment document, If invoice is cleared and the other payment document is created.
    Reset the  clearing document: Reset Document is to reset the payment document, so that it can be knocked of with other open item.
    Ex: If the invoice  is created with 100 Rs/- in document number 1,  then Payment is also posted for document number 1 invoice.
    here you have 2 options to reset and reverse the clearing document.
    Scenario 1: only reset the payment  document, then you can adjust the clearing amount or clearing document amount to other invoice number 2 for same amount and replace invoice 1. then invoice 1 will be open and invoice 2 will be cleared.
    Scenario 2: If the Payment document is reveresed and reset then the invoice number 1 which made payment will become open.
    Regards,
    Padma

  • How to show asterisk * effect once the user starts editing the document??

    I wrote a java text editor. I creat a new internal frame and allows to open a document.
    How to have an effect (an asterisk * follows the filename in title bar) once
    the user starts editing the document? And once I save that file, that asterisk * will
    disappear. It seems to me we need to add a listener, but not sure how to change
    the title bar of internal frame??

    just use DocumentListener like
    myTextArea.getDocument().addDocumentListener(new DocumentListenet(){
    public void changedUpdate(DocumentEvent e){
    frame.setTitle( frame.getTitle() + "*" );
    implements two other methods too

  • Reset documents and data in yosemite

    How does one reset data & documents in iCloud under Yosemite? I've used this support document (https://support.apple.com/kb/PH14669?)viewlocale=en_US&locale=en_US) under Mavericks, and the directions worked. But under Yosemite, all I see is a dialog box that says (paraphrasing) "click here to sign out of iCloud on all browsers." The button to "reset" is gone.
    Any help appreciated.
    Early 2009 iMac, 8GB RAM, Yosemite 10.10.2 with all updates.

    Welcome to the Apple Community kmaddenmpg.
    That is what is supposed to happen when you reset documents and data, it indicates that there is some difference between the two sets of contacts.
    The following article(s) may help you.
    Resolving duplicate contacts

  • When add a people picker (user column) in Word document (Template) and try to add a name it stuck!

    When add a people picker (user column) in Word document (un the document Template) and try to add a name it stuck!
    Is it a known issue?
    keren tsur

    Hi,
    According to your description, I have tested in my environment and I  have the same behavior.
    Only if you type the wrong name in the first time, then you click the phone book to search the right name and save, it will stuck. It means if you do other operation(e.g. type the wrong name then click “resolve” button, then search in the phone book) and
    repeat the operation above, it won’t stuck.
    It is appreciate that you can submit a feedback to Microsoft:
    https://connect.microsoft.com/
    Thanks,
    Dean Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,.  Has anyone had this happen and if so what is the fix?

    have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,.  Has anyone had this happen and if so what is the fix?

    Is it possible to post a sample page some place for us to try out (dropbox or acrobat.com)? Is your Acrobat updated? What version of WORD are you using?

  • User unable to sign document with epad after extending features (Permission Error)

    Here's my situation;
    I've provided a form for a user that has an epad to sign the document, the pdf itself has had text and signature fields added in LiveCycle, and within Acrobat Pro 9 the features have been extended. The user is still receiving the following; "The security settings on this document prevent adding text and/or placing a signature on it from Adobe Reader. To fill and sign this document you need to print it out."
    What have I missed? From what I've understood in researching this, extending the features in Acrobat Pro should be enough to allow a user in Reader to sign the document.
    Can provide file if need be.
    Thanks

    Your user should go to Extended pane in Reader to apply a digital signature to the Reader extended PDF.
    The user is probably trying to use the Sign pane in Reader which has some options disabled according to the document permissions. The new Sign pane in Reader is an integration with Adobe EchoSign service in the sense that it enables an end user to fill-up documents, electronically sign and then send a PDF document, without having the need to print them. The Sign pane provides two options to the user:
    1 - Fill and Sign: Here the user can place text using 'Add Text'. Users can add arbitrary text to a PDF, eg. in documents where Reader cannot interact with the document even though the document looks like a form, in forms where user cannot save the filled-up form. In such cases the only option a user has is to print the form, fill it and then fax or fedex the filled up document to the author or scan it and send it electronically. Using the Sign pane in Reader, a user can add text and also electronically sign the document (this is not the same as digital signature) using an image of their signature. He can create a 'signature' from a scanned paper which has user's handwritten signature and place it on the PDF.
    2 - Send for Signature: Here the user is sent to EchoSign for collecting signatures from others.
    Hope that helps.

  • How to add a default user group for multiple document type's?

    Hi,
    I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
    Please confirm.
    Thanks,
    Saloni

    Hi Saloni,
    Based on what your specific requirement, it might be easier to do it with scripting.
    If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
    Regards,
    Vikram

Maybe you are looking for