User is not integrated in organizational model
Hi!
We are in SRM 5.0 Server 550. We have created our own roles based on the standard roles. Our employee role is almost identical to SAP_EC_BBP_EMPLOYEE. We have added some transactions.
Users_gen worked fine for the users, their attributes are maintained in BBPOMA_BBP and the check tab shows green light. But when user logs on and tries to maintain its settings we receive the message "User is not integrated in organizational model"
We also receive an error while trying to create a SC. I think this is related to the problem above.
Have we missed a crucial transaction?
I can see we are missing the authorization object PLOG.
Sincerely
Anders
Edited by: Anders Öhrling on Nov 5, 2008 10:56 AM
Hi!
The problem stared when I was trying out the new role that this user has gotten. BBPSC02 didn¨t work. By a chance I looked at the settings and saw that "User is not integrated in organizational model" was stated at the top. One could also see that no attributes at all was maintained here. So it looks like there is a correlation between BBPSC02 dump and that the user is not integrated in the organizational model.
Sincerely
Anders
Similar Messages
-
Customer name is not updating in Organization model
Hi All,
One employee is created with the name "test customer" in ECC and it is assigned to organization model in CRM. After that the the employee name is changed fom test customer to __customer test. Now same changes is updating in CRM but not updating in Organization model?
can you plz tell me why the employee is not updating in Organization model?
Edited by: prajesh24 on Jun 16, 2011 11:08 AM
Edited by: prajesh24 on Jun 16, 2011 11:32 AMHi
The changes to the business partner data flows through the middleware in run time.
But if you assigned the user with some initial name as XYZ. Then change the name of the business partner to X1Y1Z1, then you need to remove the earlier entry in the name of XYZ and assign the new entry X1Y1Z1 manually.
As a standard, it will not update the name in the organisational data in CRM.
Hope this will be helpful.
Regards -
USER EMAIL NOT IN EMAIL ORGANIZATION
Hi all
Could anyone tell me how to create email account for people not in email organization?
Please point me how to this?I'm sorry, I don't understand what you are asking for.
What do you mean, "pe3ople not in email organization"?
It would also help to know what version Messaging Server you're using. -
HR Replication and User ABC is not integrated in the organizational model
Hi Gurus,
I have completed the HR replication.
I see the below structure
-O--
> BP
S
US
when I "check" the USer in the SRM Org. structure, I see an error "System error: the object US ABC has no relationships"
and the procure is "If you are dealing with a system user (object type US), relate the user to a position (or central person)."
When I do the "BBP_BP_OM_INTEGRATE", I see the below error message "User ABC is not integrated in the organizational model"
Message no. BBP_UM_UI052
Please help me to resolve
Thanks
PranavHi,
Try to assign the user in the Org structure through transaction users_gen.
related links;
User is not integrated in organizational model
T-code USERS_GEN , want to add user to Organisational unit in EBP
Move user in organisation with FM
Re: users_gen
Re: User is SRM
See these useful notes:
847439 : SRM4.0: User management in HR/ALE
928575 SRM 5.0: USERS_GEN in CUA and HR replication environment
BR,
Disha.
Do reward points for useful answers. -
User not integrated in the organisation model
Hi gurus,
i am not able to integrate user into organisation model.when i use USERS_GEN,T-code to assign ,it shows action cancelled.pls let me the reason and solution.
message no:BBPU_MEssages001Hi Kalai,
To assign your user to the organizational model:
1. Create your own business Role
a. Call transaction PFCG and copy std profile to Z profile.
b. Execute Transaction CRMC_UI_PROFILE
c. Copy business role say SALESPRO to ZSALESPRO incl. all related objects and assign your created PFCG role.Press the skip button if you get en error message.
2. Assign your created business role to organizational model
a. Call transaction PPOMA_CRM
b. Search organizational unit by u2018Structure Searchu2019 and browse the organization you need to add to.
c. Create a new position and save your changes.
d. Assign your created business role to the new position.
Mark your position and select in the main menu Go To -> Detail object -> Enhanced object description
On tab u2018Activeu2019 select u2018Business Roleu2019 and create a new infotype.
Enter your created business role and save.
3. Assign your user to the organizational model
a. Go back to the organizational model or follow steps 2.a to 2.b again.
b. Mark your position and assign your user to this position. On the popup select u2018Holderu2019 .
c. On the search help select tab u2018User by address datau2019 and search for your own user
d. Save your settings and relaunch the WebClient UI (call transaction BSP_WD_CMPWB, select CRM_UI_FRAME as component and press u2018Testu2019-button) to test your changes
Hope this helps!
Regards,
Saumya -
Business Role Assignment to User by Organizational Model
We have created the organizational model in our system where we have the levels that are tied to a specific business role. We have been manually assigning all of our users to these organizational model levels in order to have the business role assignment. I am curious if there is a program or easier way to do this than to have to create the assignment to the employee record manually in the org model.
Any help would be greatly appreciated.
Thanks,
DarcieHi Robert,
maintaining the user profile directly may be easier with only a few employees but for large companies this method will end up being more maintenance intensive.
for Org you only have to maintain it on the Org unit or position and all employees underneath will inherit the role; whether it's 2 individuals or 2000. and if the person is moved into a different position laterally or through promotion there would be no maintenance required as the information would replicate from HR (if you use/have the system) and the person would inherit the new position and role automatically.
for User parameter if you only have 2 individuals it is easier but 2000 is too much to maintain. there is some automation but would require you to create them and run them yourself.
pfcg at most companies do not fall under general master data maintenance and would require involvement from the security group and they often do not want to generate empty or unnecessary security/authorization profiles - the maintenance workload is shifted to them also in this case.
regards. -
Requisition users are not belonging to any purchasing organization
hi friends,
im using oracle 11i. as per our organization policy, requisition users should be able to make Receipts (for expense items only, not any inventory items) i.e. they will do receiving transactions. they are already assigned with Receiving responsibility . but when anyone clicks on Receipt the Select Organization Window is not appearing which normally appears to inventory users. and as a result Requisition users are not being able to find any PO to make receiving transactions.
requisition users are not belonging to any purchasing organization. pls help me how to make Select Organization Window available to those users.
Thanks,
LISANHi Lesan,
You need to revisit "Receiving responsibility", check what are the menu and function excluded from the Responsibility and what is the main menu attached to this responsibility (e.g : Purchasing Receiver GUI)...
the best practice will be in your Receiving Responsibility, *1) Attach Menu : Purchasing Receiver GUI 2) Remove all entries for menu exclusions.. Save it.. Assign this responsibility to yourself.. Now try to receive.. I am sure now system will prompt you for an organization :)*
Please test and confirm..
Regards,
S.P DASH -
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
C4C & Lotus Notes integration for service users
Hi,
I tried to find information about C4C and Lotus Notes integration for service users without success. User manual says on Sales both Outlook and Notes, but in Service only Outlook. Does Lotus Notes add-in work for service users similar than sales users? Is there anywhere demo video for that? I can only found demo video for sales (SAP Sales OnDemand Outlook Integration Demo (new) - YouTube).
-AatosHi Aatos,
The Lotus notes integration currently supports the "Field Service" role in Cloud for Service where you are primarily servicing customers in the the field and have direct email communications with your customers. In this use-case, similar to "Field Sales" (AKA SFA Users) in Cloud for Sales, you can receive an email from a customer, get information about that customer from Cloud for Customer via the Lotus Integration, and be able to upload that email into Cloud for Customer as an email activity to track the email correspondence between the user and the customer.
However, the Lotus notes integration does not support the "Call Center" role in Cloud for Service where you are a contact center agent in a centralized service center processing emails that are routed into a common inbox and all correspondence is sent out in behalf of a central inbox such as [email protected] In this usecase all emails automatically create tickets and all emails both inbound and outbound are automatically recorded as email activities without customer or user intervention. The email client for this usecase is either a C4C email client or Windows Outlook Client as you found in the documentation.
Thanks,
Rei -
User ID not found in credentials / Sun Access Manager integration.
Hi all,
I've got SSO mostly working between AM 7.1 and IDM 7.1.0.
However, if the IM user I'm attempting to log in as is a user in an organization, rather than just being a member of 'Top' in IM, then the login fails (eg, load of /idm/user/login.jsp), with the error message "User ID not found in credentials".
Users who have an AM realm resource account and are in the Top organization work just fine; users further down the tree don't.
I'm trying to trace through the IM source (reverse engineered) and so forth, but not having much luck. Before I raise a support case on this, has anyone else seen this problem?
Thanks,
Michael.The answer, if anyone is experiencing the same problem, is that it turned out to be the identity policy established for the users, which had "enforce password policy on login"; an exception was thrown, "Too few user supplied questions provided and answered based on the configured minimum of 5"; this was caught somehow and rethrown as "An account ID must be specified"; this was further recaught and rethrown as "User ID not found in credentials".
Highly confusing. -
Does this help your "user did not respond" problem?
Here’s what was going on.
If I call a buddy #1 > I get the “user did not respond”.
If I call buddy #2 > I get “user did not respond”.
However, If I call buddy #3 it works right away, no problems what so ever.
This was a constant problem, the same result over and over again when attempting to connect.
Three out of the four of us have something in common
So, how come when I call buddy #1 and buddy #2 does iChat displays “user did not respond” ? Thinking about it, we all have multiple Macs (except buddy number 3) on a network and the same router. So it appears that when I try to call someone with more than one Mac on the network I get the error.
Again, all three of us had something else in common we were all using a DMZ service on the router to direct internet traffic to a Mac which was not running iChat (ie a server).
Time to experiment
Buddy #1 disabled DMZ then I called him.. nothing but the “user did not respond” message. I disabled DMZ (now both off us have DMZ off) I called him again (after restarting iChat) and it worked.
We both restarted iChat, Macs, Routers multiple times and it still worked 8 out of 10 times. Now, this is a huge improvement on failing to connect every-time. I did however remember reading somewhere about changing the default port number.
More Settings
The default port number iChat uses also stops my video and audio from working but this is easily fixed.
Open iChat and make yourself off line then navigate to:
iChat > Preferences > Accounts > Server Settings.
Change the default port to 443.
Close the window and make yourself available
iChat now connects to video and audio calls every single time.
So, for us it looks like disabling DMZ and changing the port number worked perfectly.
Instructions.
1. Quit iChat
2. Log into your router (enter the routers address in the address bar of your internet browser)
3. Look for a DMZ setting, possibly listed within the WAN SetUp section.
4. Disable DMZ
5. You may need to restart your router
6. Configure iChat's defualt port number (shown avbove)
7. Make your-self 'Available' on iChat
8. Start a video chat.
I would highly recommend that you pass this information on to your online buddies you wish to video or audio chat with. This configuration has to be set on both the caller's and and receiving buddies computer
Equipment used whilst I was testing
Myself: iMac G5 20'' - Integral iSight - Mac 10.4.6
Buddy #1: iMac Intel 20'' - Integral iSight - Mac 10.4.6
Buddy #2: iMac Intel 17'' - Integral iSight - Mac 10.4.6
Buddy #3: iMac Intel 17'' - Integral iSight - Mac 10.4.6
Netgear DG834 Modem/Router Firmware: V3.01.29
MacBookPro 17", G4 Powerbook 17", G5 quad, G5 iMac, G3, mac mini x4 Mac OS X (10.4.6) Good luck!Hi Jan,
Some notes.
The Certain Buddy problem is almost certainly down to NAT issues.
DMZ is an extreme form of Port Forwarding and is therefore a NATted service on most devices.
Netgears are know to kave this problem with iChat even with the same model with the same firmware.
It means the problem continues in Port Forwarding, Port Triggering and DMZ.
UPnP (Universal Plug n Play) is not a NAT service so will get around this.
However there seems to be somthing quirky with Netgear's implemintation of this that needs it started up at least twice to work properly.
The need to change the port from 5190 to 443 normally occures on those devices and firmware that Port Forwards AND list protocols to open the ports which then lists port 5190 twice.
Changing the port in iChat and then disabling the Port forward on port 5190 TCP also should get around this problem.
9:52 PM Sunday; June 11, 2006 -
Organizational Model Determination Rule
Hello !
I am looking for an organizational model determination rule which is looking for the Org Unit of the given employee responsible. Could anybody help?
Maybe a little more explanation. I created a partner determination procedure which looks for the employee responsible via the business partner. The system should then look for the organizational unit in the org model, which belongs to the employee responsible. Therefore I need an organizational model determination rule.
Thanks a lot!
AstridHi Prajit ,
We want to determine Org based on employee responsible but not on basis of USER.
Employee responsible will be assigned to a particular position in Organization .
We want to determine Organization unit where Employee is assigned to that particular position.
When employee resposnsible is changed Org unit (Service ) should be changes .
Please suggest solution.
Thanks & Regards,
Anup Reche -
Organizational Model - WebUI business role assignment
We have created the organizational model in our system where we have the levels that are tied to a specific business role. We have been manually assigning all of our users to these organizational model levels in order to have the business role assignment. I am curious if there is a program or easier way to do this than to have to create the assignment to the employee record manually in the org model.
Any help would be greatly appreciated.
Thanks,
DarcieHi Robert,
maintaining the user profile directly may be easier with only a few employees but for large companies this method will end up being more maintenance intensive.
for Org you only have to maintain it on the Org unit or position and all employees underneath will inherit the role; whether it's 2 individuals or 2000. and if the person is moved into a different position laterally or through promotion there would be no maintenance required as the information would replicate from HR (if you use/have the system) and the person would inherit the new position and role automatically.
for User parameter if you only have 2 individuals it is easier but 2000 is too much to maintain. there is some automation but would require you to create them and run them yourself.
pfcg at most companies do not fall under general master data maintenance and would require involvement from the security group and they often do not want to generate empty or unnecessary security/authorization profiles - the maintenance workload is shifted to them also in this case.
regards. -
Just bought a preowned palm organizer model TX. I cannot sync it with my computer
Just bought a preowned palm organizer model TX. I cannot sync it with my computer. the handheld device has the previous owner's name. how do i change the user name on the device
Perform what is referred to as a Hard Reset. It will delete everything including the previous owner's Hotsync ID.
Check out this Palm Knowledgebase article to read about how to perform a Hard Reset.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
BP number in Organization model
Hi experts
When we will creating new organization structure along with Org Id BP # will be coming automatically
I would like to know what are the settings need to be done for this.
becoz now when i am creating in my production server now it is not displaying BP # for newly created Org model
Many thanks
VinayHi Vinay,
Go to IMG> CRM>Master DataBusiness PartnerIntegration Business Partner-Organization Management--Set Up Integration with Organizational Management.
Here you have to set up:
HRALX HRAC X
HRALX OBPON ON
HRALX ONUMB 2
HRALX OSUBG and here the no range for ur org.
Apart from the above steps, follow the steps given below as they did work in my scenario, this generally take some hours for the system to generate the BP ids so its better to schedule these activities in the evening so that when the Ids would be visible the next day.
Scenario when the buffering is not done and the Business partner id is not getting created in ppoma_crm
Check Settings for Attribute Maintenance
Check the consistency of the attribute assignments to the organizational units.
1. Access the activity using the following navigation options:
Transaction code SPRO
SAP CRM IMG menu Customer Relationship Management  Master Data  Organizational Management  Organizational Model  Tools  Check Settings for Attribute Maintenance
2. Execute the check.
Organizational Data Settings Check
See documentation of the IMG activity for details about this check
1. Access the activity using the following navigation options:
Transaction code SPRO
SAP CRM IMG menu Customer Relationship Management  Master Data  Organizational Management  Organizational Model  Tools  Organizational Data Settings Check
2. Execute the check.
Setup Buffering for Sales Scenario
Report HRBCI_ATTRIBUTES_BUFFER_UPDATE is used to buffer the attributes of organizational management objects. To enable buffering you have to maintain view T77OMATTR.
Enable Buffering for Sales Scenario
1. Access the activity using the following navigation option:
Transaction code OOATTRCUST
2. Select the structure node Scenarios.
3. Check the checkbox in the column Buffering for the scenario SALE.
4. Choose Save.
Update Buffers for Sales Scenario
1. Access the activity using the following navigation option:
Transaction code SA38
2. Call transaction SA38.
3. Select the report HRBCI_ATTRIBUTES_BUFFER_UPDATE
4. Select the checkboxes for Delete All Buffers and Restructure buffer on Date.
5. Choose Execute (F8).
In note 737315 further details regarding this topic are described. Note you can also schedule a job in transaction SM36 to run this report regularly.
Hope this helps.
Regards,
A S
Maybe you are looking for
-
What happens to the vm failed in HA
Hello, If an ESXi server fails, the VMs hosted on it will go down or at least become unreachable but VMware HA responds by restarting the VMs on other hosts in the cluster that survived the failure. My question is when only a single VM fails instead
-
I started a download of a video in the app "Free gift for 12 days". I cancelled the download before it was completed. It is now affecting the music in my phone library, as the next or previous song is being played instead of the selected song. Any su
-
Post-form trigger raised unhandled exception
I have enabled TRANSLATION and ATTACHMENTS menu on my oracle form(form customization). but if i click on attachment menu the window opens for attachments but when i am going to close a window it throws an exception as **FRM-40735: POST_FORM trigger r
-
A problem caused by the file name
hi,i have a problem today,here is the source file: //saved as String.java class Strings{ public static void main(String [] args){ String x="java"; System.out.println("x string ="+x); and when i try to compile it,the compiler complains as follows: jav
-
Ok my problem is my computer running windows 7 it will not attempt to connect to iphone. when plugging in it dose nothing as if nothing is going on. my old iphone (iphone 3g) can still connect to computer with the same cord but not the same results w